Palm z22 and new computer using vista 64 how do you setup / hotsync

old winxp died last night.. have a new pc with vista64.. installed palm desktop software.. but keep getting device driver problems when plugging in the z22 to do the first hotsync...
any hints or clues.. using the oem disk that came with the z22
I see new software available.. but says it does not support usb hotsync with vista 64.. since the palm z22 only has the usb connection.. what's left to do?
thanks
chris
Post relates to: Palm Z22

hello soundguy and welcome to the forums....
You can only sync to Vista 64 bit with a Bluetooth wireless connection.  Palm has no drivers for 64 bit version of Vista supporting the cable sync.  Unfortunately, the Z22 does not have Bluetooth. 
The only suggestions I can offer is to use an IRDA to USB adapter and sync that way.  The challenge is to find an Infra Red adapter with 64 bit drivers.
Colapop

Similar Messages

  • Palm Z22 and sync with Windows Vista 64-bit system

    I have  been trying to sync my Palm Z22 with a new laptop that is running the 64-bit Vista.  Based on some posts I had located, I ordered an IrDA Wireless Bridge to try to resolve the connection problem.  Something isn't working right and I can't figure out how to fix the problem.  The IrDA adapter is listing in the hardware option on the computer so it appears to have installed correctly.  The laptop has inconsistently recognized the USB connection when I plug it in however.  I can not seem to get the IrDA adapter to recognize my Z22.  I've got the Z22 set up to use the infrared to transfer information.  I have noted that the "beam" feature is ON.  I have looked at APPS and have observed that most of those options are "locked" and when I have clicked on "contacts" for example, it says it's a locked app and can not be beamed.  I don't know if that is part of the problem  or unrelated.  I also happened to observe that the Apps are listed as what to transfer with MODEM connection but I'm not sure why that is even showing as a connection option since I've never used the modem to connect.
    I can successfully use my Z22 to connect via USB cable to my Vista 32-bit computer system.  I'm not sure what I'm doing wrong in my attempts to use the adapter and connecting the Z22 with the new laptop. 
    I'm not sure what else to do and would very much appreciate some help with this.  Could someone PLEASE tell me what I may be doing wrong re: the setup connection between the adapter and Z22 or any other ideas re: what the problem may be concerning why I'm not yet being successful in getting this setup to work...? 
    Many thanks in advance for any assistance with this problem.
    Post relates to: Palm Z22

    Sorry for the delay in replying (bet you were hoping this worked, huh?) but it has taken some time to uninstall & reinstall the Palm software and make numerous attempts to configure the information to again try to sync the Z22 with the laptop.  I went back to amazon.com and located the device I'd purchased to confirm it would work with the 64-bit Vista.  Someone had posted their success in using the adapter for exactly what I need to do - sync my Z22 with a 64-bit Vista computer.  That consumer's posting noted: "The USB 1510 provided the solution. As soon as I plugged it into the USB port of the laptop, Vista went online, found the driver, and installed it. I was able to set up IR Hotsync as I would have on any laptop with a built-in IRDA port."
    I don't know what problem I'm having but have noted that my palm desktop software doesn't note what device (Z22) is to be connected and I can't find anything in the HotSync manager that allows me to specify that device.  For some reason, I had gotten an error message and it referenced a Treo connection which is odd since I don't have a Treo and I downloaded this Palm desktop from the Z22 site online...?  I did note my software on my Z22 is a v. 5 but when I checked various support sites online, it appears to indicate that version on my Z22 would be compatible with the Palm 6.2 version I just downloaded to my computer (and I can't find any information to indicate a newer software for my Z22 is available or how to do that either).
    So, I'm back to not being able to get my Z22 to be recognized by my computer via the infrared adapter.  I'm hoping that some of the added information I've been able to provide may give another clue of something else I can try before I have to give up and contact Amazon to return this device and either try to decide what other device may be an option.  I had checked with a local computer supply store here but they don't carry any type of device for this purpose so that's why I resorted to searching online for a solution to this problem.
    Thank you in advance for any assistance you may still be able to provide.  I really do appreciate your time with this matter.

  • Palm Z22 and issue with using Outlook 2007.

    Info:  Palm Z22, Desktop software for Palm is updated to most current, Outlook 2007, 32 bit Windows Vista computer.
    I have been using Palm Z22 for several years.  I want to use Outlook 2007  but cannot get the data from the Palm device or the Palm desktop software transfered to the Outlook 2007.  I have tried a reinstall of the Palm Destop software, including choosing the Outlook option over the Palm option and nothing happens.
    My goal is to use Outlook 2007 to sync with the Palm Z22 device and vice versa.  I am wanting  the calendar primarily.
    Thankyou for any help. 
    Post relates to: Palm Z22
    This question was solved.
    View Solution.

    You need the Outlook 2007 conduits.
    Click here for the download page;
    http://kb.palm.com/wps/portal/kb/common/article/8716_en.html
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/wps/portal/kb/na/zire/z22/unlocked/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • ITunes and Quicktime will not start on new PC using Vista

    Hi everyone,
    I just bought a new PC using Vista "Home Premium" edition. No previous version of iTunes on PC. I downladed iTunes 7.6. When I try to start iTunes Windows error msg says "iTunes has stopped working check on-line for a solution and close the program". When I click on the link provided it just brings me back to the same page where I already downloaded iTunes 7.6! When I try to start Quicktime I get the same error msg.
    Any suggestions on how to fix the problem?
    Thank-you in advance for your help.
    Nat

    I had the exact same problem. Just use this article:
    http://support.apple.com/kb/TS1717
    What ended up happening for me was that it was a user-specific problem. For that, just follow these steps (taken from the above article):
    Remove iTunes Plug-ins
    third-party iTunes plug-ins can cause many issues, particularly if the plug-in has not been updated to be compatible with new versions of iTunes. iTunes plug-ins are located in the following location:
    C:\Users\username\AppData\Roaming\Apple Computer\iTunes\iTunes Plug-ins
    Remove iTunes Preference files
    Some of the files that iTunes uses to store settings and preferences may be corrupt and cause issues. iTunes has two folders where preferences are saved. Move one of them to the desktop and test to see if the issue persists. If it does, move it back and remove the second folder. The location for the two preference folders are:
    C:\Users\username\AppData\Local\Apple Computer\iTunes
    C:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Hope this helps.

  • I set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same ID). how do i consolidate the two users on my new mac book?

    i set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same apple ID). how do i consolidate the two users on my new mac book?

    Well if you use the Finder Go menu to Computer, a window opens up double click on your boot drive and then on Users folder, open the other user folder and open Public and drop your files into DropBox
    When you do this it will copy them and change the permissions and user assigned to it, so log into the other user and place them into your respective normal folders.
    Once you have all your files over and don't need the old user, use System Preferences > Accounts to delete it if you wish, however it's good two Admin accounts on the machine in case something bad happens in the other. Some people for security reasons on use a Standard account for most uses and a emergency Admin account.
    One can still do most Admin things in Standard user.

  • I have photoshop CC and lightroom on my computer for 9.99/mo ...i just purchased a new computer to replace my existing computer and need to know how to download photoshop CC and lightroom onto my new computer using my current account so i don't have to pa

    i have photoshop CC and lightroom on my computer for 9.99/mo ...i just purchased a new computer to replace my existing computer and need to know how to download photoshop CC and lightroom onto my new computer using my current account so i don't have to pay again

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • I transferred CS5 to a new computer using PC transfer program. CS5 started up on the new computer OK, but now does not recognize raw files. Should I uninstall and reinstall again?

    I transferred CS5 to a new computer using PC mover ultimate. CS5 appeared to start up normally, I had to insert the serial number from my original CD. However, now the program does not recognize CR files and Adobe bridge is not working properly.  I get messages that CS5 needs to be updated, but the updates fail. What should I do? Should I uninstall CS5 on the new computer, uninstall CS5 on the old computer using the original CD, and then reinstall CS5 using the CD on the new computer?

    Transferring programs does not work well with Adobe applications.  You should install them.
    As far as having the program on different machines goes, you are allowed to have two activated installations so if it is working on the original machine there is no reason to remove it unless you need the space.

  • Have tried to copy ratings over to a new computer using the export playlist function and this fails... can anyone suggest why?

    have tried to copy ratings over to a new computer using the export playlist function and this fails... can anyone suggest why?

    Because ratings don't travel with the files or the playlist.
    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
    tt2

  • I just got a new computer with Vista on it. When I hook m...

    I just got a new computer with Vista on it. When I hook my WRT54G router to it, I am unable to send e-mails. They get stuck in my OUTBOX and I get a timeout error. I can receive e-mails but cannot send them. Also, my internet can drag at times when the router is connected. When I remove the router, everything works fine.
    I've contacted Tech support several times and every suggestion they give doesn't solve the problem. I've updated firmware, changed all sorts of settings in the router setup page, including adjusting my Port Range Forward settings (at the instruction of tech support)
    I'm wondering if it's just a Vista thing and I should buy a newer router. I don't know what else to do.
    Any suggestions?
    Patrick

    Well if you can send emails, when you connect computer to modem directly, then it might be ports forwarding issue. Update firmware of router to latest version and assign a static ip on computer like 192.168.1.11, and obtain ports used by outgoing mail server, and forward those ports to static IP assigned, on router's setup.

  • I have WRT54G v3.  Have new computer running vista -- cha...

    I have WRT54G v3.  Have new computer running vista -- changed WEP security to WPA.  New computer works fine. 
    Went to use my laptop today and even though it shows a WPA secured connection and says I'm connected -- I can't get on-line.  Laptop uses WIN XP.  New computer and older wired desktop connecting fine.
    What do I need to do to make hp laptop & new hp compatible? 
    Thanks 

    I followed directions for Nortons firewall -- I also downloaded Network Magic. 
    Last night I ran ipconfig on both computers and didn't change anything but they both came on-line.  Not sure what or why but they were at least working.
    Just now I followed directions for Nortons firewall on new computer which has 2008 I believe........then downloaded Network Magic and installed on both PC & laptop.
    The only difference is the version of Norton which os '05 on the laptop.  I see a secure connection - WPA - on both computers.
    New question:  I have a 3rd computer, an older PC which is connected direct to the router.  This is primarily for my husband to use for e-mail and browsing the web -- no need to share any files and it has a separate printer.     Should I also run Network Magic on that computer or leave it as is?
    Thanks so much to both of you.  I was up till late worrying about this.

  • How can I move actions from old computer using Elements 6 to new computer using Elements 12?

    I downloaded some actions onto my old computer using Elements 6. I would like to move them to my new computer using Elements 12. How do I do that?

    Does she have any photos in the iPhoto library on her new machine?
    What version of iPhoto does she have?
    The general answer is to trash the iPhoto library on the new computer (assuming it is empty) and drag the old iPhoto library to the pictures folder of the new machine and launch iPhoto letting it convert the library
    LN

  • Moving iTunes to new computer, using external HD, not seeing library in iTunes

    Hi all,
    I got a new laptop running Windows 7.  I followed Apple's directions for how to move iTunes to a new computer using an external hard drive. 
    http://support.apple.com/kb/HT4527
    All looks good until Part 5, Step 6 where it says "Open iTunes.  You've now moved all your music, playlists, and other information like play counts and ratings from your old computer to your new one."  Now, I can go into my music folder on the new laptop, click on iTunes, then on the music folder and all my music is there.  But when I open iTunes, none of the music is evident in the library.
    Hoping this is simple user error!  Thanks, all.
    Lisa

    Ideally you should copy the complete iTunes library structure - typically located at C:\Users\username\Music\iTunes - from the old computer to the new one.  It should look like this:
    Assuming that your music and other media files are all contained within the iTunes Media folder and its subfolders you can move this iTunes folder and all its content from your old system to the corresponding location on the new one (i.e., place it in C:\Users\username\Music). If you've already installed and run iTunes on the new system, overwrite the files and folders already created in that location - this assumes that you've not added any content on the new system, i.e., you are just migrating your library from the old system to the new one, not merging different libraries on the two).
    Then, just to be sure you are picking up the right library information, hold down the Shift key while starting iTunes on the new system.  You'll get this prompt:
    Click Choose Library.. then navigate to and select the iTunes Library.itl file within the folders you just copied across.  Click OK - you're complete library - media, artwork, playlists, etc. - should now be available on the new system.
    One further benefit of this approach - because you have replicated the library in full any iDevices will see this as "the same" library as you had on the old system, and sync operations will continue to work without getting a message about your iPod / iPhone being erased.  You should also make sure that you create and maintain a backup of your library (the full folder structure as illustrated above) as a safeguard against any future cause of data loss.

  • Disk mode and new computer

    When I turn my iPod onto disk mode, it remains at the screen "ok to disconnect" with a checkmark indefinately. It doesn't matter if I plug it into the wall of computer or whatever. I turned it to disk mode to transfer my music onto a new computer, but that doesn't work either. I'm horribly confused. Can anyone help me with either problem?

    To get it out of disk mode and remove the check mark, simply reset it.
    To transfer the music to a new computer using the iPod as a hard disk, see this.
    How to use your iPod to move your music to a new computer.
    You'll notice that it's a different method of enabling disk use.

  • What is the Proper Way to "Sync My Music & Apps to a New Computer Using ITunes"

    What is the Proper Way for Me to "Sync My Music, Pictures & Apps to a New Computer Using ITunes"?
    I had to buy a New Computer since my other one went out, but when I log into ITunes with the New Computer using My Apple ID "Nothing is there"...
    None of My Previously Purchased Music or Apps are in My ITunes Media Library; so, I any not sure how to Properly Proceed with Syncing?
    Any Help & Guidance would be Greatly Appreciated!!!
    Thanks,
    Don

    Sounds like something might be wrong there. Years ago I set up the playlists to sync to my iPhone and 'Everything' for my iPod and I've never needed to change or even check it since, ever.
    However, how and why are you 'restoring' the iPod? This is not something you should ever need to do. If you restore back to original settings, then I guess that would throw away your own settings, but as I said, there should be no need to keep doing that. Or at all in fact.

  • Need to set up palm Z22 on different computer

    Hi.  I am having serious problems with my pc.  How can I set up my Palm Z22 and all its info into a different computer? 
    I appreciate all your help!!
    Post relates to: Palm Z22

    Do you see the hot sync icon (circle with red and blue arrows) on the bottom right of your computer screen - right near where the time is displayed?
    If it is not there, the hot sync will be disabled and you need to enable the program by opening the HOT SYNC MANAGER. This can be found when you click on Start > Programs/All Programs > Palm OS/Palm One > Hot Sync Manager.
    The hot sync manager should then show up on your screen (on the bottom right) and you should be able to sync.
    Let us know if this works for you!!
    Good Luck!!
    Post relates to: Tungsten E2
    Post relates to: Tungsten E2

Maybe you are looking for