Palm Zire 31

Not a MicroSoft ActiveSync question!
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Please read the post at the top of this section titled "64 bit Palm Desktop drivers are here".
You will most likely need to install the Aceeca drivers to get it to work with Win7.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Hot sync says Palm Zire has successfully synced but no data (using Windows 7 32 bit)

We have a Win XP desktop on which an older version of Palm Desktop has been working for years and been able to sync with my Palm Zire and my husband's Palm Z22. Now that we have to decomission Win XP desktop have installed Palm Desktop by Access v6.2.2 and Hotsync v7.0.2 on Win 7 32bit laptop.
My husband has a Palm Z22 and has had no problems setting up user and syncing using Palm Desktop by Access when using Windows 7. However, although the Palm Desktop has correctly indentified by device as a Zire and hotsync via cable says it completes successfully no data appears on the Desktop. In reverse, when I add a new contact on Palm Desktop and sync it does not appear on the handheld.
Have tried downloading and installing driver from:
http://aceeca.com/support/sales-support/downloads/product/drivers-32-bit-usb-windows-driver-for-palm...
However, when I followed the instructions provided with teh 64 bit download my laptop said I already had most up to date driver!
Please help as I rely on my Zire and need it to back up successfully.

Hello, and Welcome to the HP Support Community!
The Aceeca drivers are ONLY for 64-bit Operating Systems. Since yours is 32-bit, it's not needed.
Try right-clicking on the shortcut for Palm Desktop, then choose "Run as Administrator". See if the data appears.
Another suggestion would be to turn off "UAC" or User Access Control. Control Panel/Users/Turn off UAC.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Is Palm Zire 21 Software compatible with Palm Pre Plus Cell Phone?

I have an older Palm Zire 21. I love all the features. However, now I am trying to consolidate my Windows (vista) Calendar with my Palm and it is not compatible. I thought I would purchase the newer Palm Pre plus Cell Phone in order to have all of my contacts and calendars on my phone as well as my laptop. Though no one can seem to answer my question: Can I import my contact and calendar from my Zire 21 to the Palm Pre Plus?
Many thanks to who can answer this for me. I greatly appreciate your time and assistant.

webOS (the new Operating System) from Palm does not natively sync to your computer, but to the "cloud" (online servers).
Palm offers a program that will read your Palm Desktop information, and transfer it to Google. This is only a one-time transfer, and not a sync solution. See this thread.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

WINDOWS 8 DID NOT SUPPORT MY PALM ZIRE 72 PROGRAM. LOST ALL DATA.

My new windows 8 computer does not support my Palm Zire 72 software. I had my handheld charged, but unplugged and lost all my data since there was no backup. I have my old hard drive with most of the backup on it. Is there any way I can get this data back. It was YEARS of contacts that I lost. Thanks for your help.

vhk,
Win 8 does support Palm desktop software for Zire 72.
I have been using it for 3 months with no problems.
If you have 64bit Win 8 you need to download and install the Aceeca driver to HotSync.
http://h30434.www3.hp.com/t5/Palm-OS-WinMo-Hardware-and-Software/64-Bit-Windows7-8-8-1-USB-drivers-f...
I have my Windows UAC (User account Control) set to Never Notify.
I set the Palm Desktop/ Properties/Compatibility to Run this program as administrator
I use the same PD software (4.14e) on Vista, Win 7, and Win 8 ( I HotSync my Zire 72 on all 3 PCs weekly)
When you install the PD software skip check the internet for updates step.
If you can find your Palm desktop user folder on the old hard drive you might be able to copy it and paste it into the palmOne folder when you have Palm Desktop installed on the Win 8 PC.
User folder path for PD 4.1for XP & Vista is: Computer (C drive)/Program Files/ palmOne/User ID (same as Zire 72 last Hotsync)
User folder path for PD 4.1for Win 7 & 8 is: Computer (C drive)/Program Files (x86)/ palmOne/User ID (same as Zire 72 last Hotsync)
If you had a long user ID on the Zire 72 it will be shortened to 5 or 6 characters in the palmOne folder.
http://h30434.www3.hp.com/t5/Palm-OS-WinMo-Hardware-and-Software/How-to-copy-Palm-Desktop-data-to-a-...

Palm Zire 21 hot sync

Installed Palm desktop 6.2 on Windows 7 64 bit machine. Downloaded USB drivers that installed correctly per the forum. Syncing on Palm Zire 21 log says it successfully completed but the Palm desktop software has no addresses, calendar, memos or to do list. Any ideas?

The Zire may be too old for 6.2.2, but there is a patch that can work.
Go here: http://www.PimlicoSoftware.com/legacy.html and download "PalmHotsyncSetup"
When you clicked on the user in Palm Desktop, was there another listed?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Calendar Sync, Palm Zire 31 and Mac OS 10.4.6

We just purchased several Palm Zire 31 handhelds because that model is one on Oracle's list as "certified" to work with Calendar Sync. However, I cannot seem to get it to sync properly to Oracle Calendar. Prior to installing Calendar Sync it synced to my Palm Desktop data just fine. Please point me in the right direction.
Here are all the versions and hardware:
Powerbook G4 running Mac OS 10.4.6
Palm Zire 31 running Palm OS 5.2.8
Palm Desktop software 4.2.1
Oracle Calendar Sync 9.0.4.2.10 (installed on Zire 31)
Palm HotSync Manager 3.2
Oracle Calendar (desktop software) 10.1.1.0.2.694

I don't sync a Zire 31, but I do sync a variety of Treos and Tungsten units with 10.4.x. I sync my Events and Tasks with Oracle and my Addresses with the Apple conduit.
Here are the directions I have come up with:
First, make sure you are using the latest Oracle Palm Sync (sounds like you are)
Second, make sure you have the latest iSync Palm conduit (version 3.0.2 under OS 10.4)
open the iSync application, go to the Devices menu, and choose Enable Palm Sync for this device
Click on the device name. Make sure Contacts is checked, but NOT Calendars
Quit iSync
Open Palm Desktop -> HotSync -> Conduit Settings
choose iSync Conduit and click Conduit Settings. Check the box to enable Palm Sync for device
Open MacintoshHD -> Library -> Application Support -> Palm Hotsync
move Apple into Conduits folder
move Oracle Calendar Address Conduit into Disabled Conduits folder
HotSync, and you should be good to go.

Palm Zire 71 and Will not Sync with information on old Laptop

I can't get the Palm Zire 71 software on my old laptop to sync with my new Cradle that I bought on eBay. I get a message that says something like 'The connection between your handheld computer and the desktop could not be established. Please check your setup and try again."
All my info is on the Palm Zire software on my old computer and I want to sync and move to my new laptop. Please help!
Post relates to: Zire 71

Hi Roaddog_46250
Good forum etiquette is to not create multiple threads for the same issue. I've marked this thread as read only and anwered your question in this post: http://forums.hpwebos.com/t5/Windows-HotSync/Windows-7-and-Palm-Zire-71-and-new-Cradle-purchased-on-...

Can't get Palm Zire to work with windows 7

Can't get palm zire to work with windows
Post relates to: Palm Pilot

Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista. It's all there.
After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Need help finding a Palm Zire 72S wall charger

Does anyone know where I can find a wall charger (ac) that is reliable with a Palm Zire 72S?
Thanks for your help!
Post relates to: Zire 72

Radio Shack in the US has a charging system called iGo that has a basic charging brick with different tips for different devices. The tips adjust the correct polarity and voltage. I use it to charge my cell phone, GPS, and Palm TX and Zire72.
WyreNut
Post relates to: Palm TX
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Can't sync Palm Zire

I am trying to sync my Palm Zire 31 with iSync. I have the 'Apple' conduit installed properly and I have enabled it using Hotsync Manager. When I start iSync and hit the sync icon on the Palm, a sync process starts, but the symbol for the Palm never shows up on the iSync window and the sync times out and fails. I was able to sync with this device before using the Palm conduits and Palm desktop. Any help would be greatly appreciated. Thanks,
Frank

Here is the HotSyn log for my last attempt---
HotSync 3.2.1 started 3/30/06 9:32:11 PM
Loading “Conflict Notifier”
Notifier 'Conduit Conflict Notifier' version 1.0.0
Notifier Conduit Conflict Notifier OK
Local Synchronization
Syncing via transport “USB”
Found Palm user “FLMiller”
ROM Listing
FileName Version Type Creator Created Modified Flags
ADPCMCodec 0003 CdPl APCM 03/06/04 03/06/04 0023
PIMsSupport-pdmE 0003 aexo pdmE 02/25/04 02/25/04 0003
---Lots of ROM/RAM info here--- then:
Loading “Conflict Notifier”
Notifier 'Conduit Conflict Notifier' version 1.0.0
Notifier Conduit Conflict Notifier OK
Loading “Install Conduit”
Conduit “Install” version 3.0.0
Sync type is Install/Restore
OK Install
Loading “Apple”
Conduit “iSync Conduit” version 3.0.0
Sync type is Fast
iSync Conduit starting 3/30/06 9:32:12 PM
Timeout waiting for Sync Engine, exiting 3/30/06 9:38:40 PM
iSync Conduit synchronization failed
“iSync Conduit” failed (error = #-1)
Loading “Install Conduit”
Conduit “Install” version 3.0.0
Sync type is Install/Restore
OK Install
Loading “Backup Conduit”
Conduit “Backup” version 3.0.0
Sync type is Backup
Remote database 1 name is DynDevInfo-DDIR
Remote database 2 name is Display-Dply
Lots of Backup info here, then:
OK Backup
Loading “Conflict Notifier”
Notifier 'Conduit Conflict Notifier' version 1.0.0
Notifier Conduit Conflict Notifier OK
Last sync time and PC ID updated on handheld
HotSync Complete 3/30/06 9:39:16 PM
It seems that the iSync conduit is found and loaded, but it fails to work. I don't know how to remedy this. Reinstall the conduit? - but where can I find a copy of it? I tried deleting the plist you referred to, but iSync will still not show the Palm after I 'enable Palm syncing' in iSync and enable 'iSync for this Palm' device in HotSync. I did an OS X repair-cleanup (Applejack) before this last attempt.

ICal events being deleted when syncing with Palm Zire 21

I have been syncing my Palm Zire 21 with iCal successfully for over a year with few problems. A few weeks ago I noticed that almost, but not all of the events on both the Palm device and iCal more than three months old were gone. Then, a few weeks later, I noticed that the events suddenly were all back in the iCal application, but not on the Palm device.
But this week, I used HotSync (as usual) to sync iCal and the Palm device, and the events were gone again. Now I am wondering what on Earth I am doing to cause this. I have read the articles about setting up to sync. I double-checked to be sure I have been syncing the way that is outlined in the instructions in the help articles.
I must have missed something vital. I have been backing up my iCal to my .Mac account using Backup. I am thinking that I can restore the iCal events using my last backup. Can I? And how do I keep this from happening again?
MacBook Pro Mac OS X (10.4.10) "OS10.4.10" "iSync 2.4" "iCal 2.0.5" "Hotsync 3.1"

Found the issue for me. The events are not deleted, but filtered in the standard calendar view. The iPhone shows everything as it should. Outlook 2003 has all the events to as seen when going to categories view.
It seems that once events pass on the iPhone and then a sync via iTunes to Outlook 2003 the "All Day Event" field is removed from the calendar entry.
Creating another Day/Week/Month View in outlook 2003 that has a filter to only include calendar entries where the "All Day Event" field "does not exist" will allow viewing the "hidden" past events.
Hopefully this will be fixed VERY SOON.

ISync/Palm Zire 21 question

Please forgive me if this has been answered. I searched the board and don't see my question answered.
Palm Zire 21: for the first 3 days, everything was fine except everytime I did an iSync, I had to reset the Palm (change the date, fix the time, etc.). I do not use, and hope I don't need to use, the Palm Desktop software.
I have Hot Sync 3.2 (Enabled) and iSync 2.3 (Palm Sync Enabled).
In an attempt to fix this/start from scratch, I got the following message: "In order for iSync to work properly with your Palm OS device, the following HotSync conduits need to be disabled.
Address
Calendar
Contacts
Datebook
etc.
After hitting "OK", those conduits no longer show up in the HotSync>Conduit Settings window (they are all in the Disabled Conduits folder now)
Now iCal and To Do lists sync just fine, but no addresses show up in Palm AND I have to RESET every single time.
Can you please help me understand why this would be so? What is markspace.com and do I need to get the "missing sync" there?
Thank you Thank you Thank you in advance.
iMac Mac OS X (10.4.7)
iMac Mac OS X (10.4.7)
iMac Mac OS X (10.4.7)

Something clearly isn't right. Likely several things, actually.
The contents of your active Conduits folder show no conduit conflicts. A couple of thoughts, though…
You should move the Memo, Memos, Note Pad, Photos and Voice Memo temporarily to the Disabled Conduits folder to eliminate the possibility that any of these (maybe extraneous) Palm conduits are the root of the reset problem. The result will be that your Palm memos will no longer synchronize with the Palm Desktop, but that can be restored by moving the later Memos conduit back into the active folder. If the reset problem is no longer apparent when these conduits are not active, then one issue may be resolved.
Open the HotSync Manager application on your Macintosh and check to see that the following conditions are true:
• HotSync is set to Enabled in the HotSync Controls tab, and
• USB is checked in the Connection Settings tab
What does your HotSync log—as opposed to the iSync log—say about these events?
Have you configured the synchronization parameters for your device in iSync by pressing the device icon labeled with your HotSync name to drop down a pane in which you select various contact and calendaring options? Are both Contacts and Calendars enabled?
When you say, "… the only thing that's now uploading to my Palm is my To Do list" are you sure that in fact, it is to do and not memo information that is being transfered? I ask, because with the iSync Palm Conduit, to do or task data is synchronized by it with iCal, whereas there is no provision in iSync to synchronize memos. And, if iCal task data works, one has to wonder why event data does not synchronize…

Can I create a java app for my palm zire 71 that uses floating point calc

I am an eclipse user that is looking at studio creator 2 and was wondering if I could create a java app for my palm zire 71. I have read alot about no floating point support in midp... is that true for java on the palm? If so, how does one calculate with floats and doubles to do sqrt functions etc?
Thanks in advance for your time
Dean-O

I looked at netbeans and it does not support floating points in midlets. Not good for palm app if no floating point ability. J2ME supports floating point but in netbeans... is uses midlets and there are no floating points. Now what does one do? Not that dreaded C++
THanks in advance
Dean-O

Palm Zire 31 installation on iMac - can't perform initial sync

I am in serious need of someone who has Mac & Palm OS knowledge. I bought a second Palm Zire 31 to replace the my recently deceased Zire 31. I followed instructions, but since I already had Palm installed on my iMac from an earlier Palm M150 and subsequent Zire 31, I am unable to create the first sync between Z31 & my Mac.
I do not want to lose 3+ years of contacts and calendar data which resides on my Mac via previous synchs with my old Palm units.
Should I rename my old Palm installations and try to reload the Palm software CD? If so, how do I do that?
I know more info is needed to help my situation, but ask me and I'll try to answer. - Thanks

You should back up the Address Book and iCal data which is stored on your Macintosh platform, if you are using them—and, using iSync and the iSync Palm Conduit—to exchange data with your Palm device.
Then, simply add your new device to iSync using the Enable Palm OS Syncing… option, and choose to overwrite the contents of your handheld during the initial event.
If you are instead using the Palm Desktop to synchronize your device, you should be aware that Palm does not provide substantial support for OS X users, though you can browse their technical information library for solutions. Palm has historically been clear the they did not intend to support Mac OS X going forward after the release of OS X 10.4 was anticipated, and have issued only maintenance releases, leaving this responsibility instead to Mark/Space, developers of the Missing Sync for Palm OS.

Palm Zire 31 and Panther

I Just got a cable for my Motorola V 400. And it works great with iSync. Now I found out that my Palm Zire 31 would Sync with my iCal and Address book and I want it to work. I downloaded the Palm Conduit program and it installed fine. I looked in the help and everything but it won't sync. I rebooted my computer and everything and now when I Hot Sync it says it synced but I looked on iCal and Address book and there is no information vise versa on the palm. Another thing is there is no icon on iSync for the Palm.
Tory Vaughan IV
iMac G3 700 (Slot Loading) Mac OS X (10.3.9)

Welcome to Apple Discussions.
The issue here is that you've installed the Palm Desktop and your handheld is synchronizing with it, but not with the Address Book and iCal.
If you want to synchronize with the Address Book and iCal, you must install iSync 1.5 and the iSync Palm Conduit 1.2. Those actions will deactivate the standard Palm conduits, which otherwise would conflict with the iSync Palm Conduit, and activate the iSync Palm Conduit.
You can download the iSync Palm Conduit from here:
http://www.apple.com/support/downloads/isyncpalmconduit.html
Is is only intended for use with iSync 1.5 and Mac OS X 10.3.9 and earlier.

Need Driver for Palm Zire 71 Dock

I need a driver for my Palm Zire 71 dock. I do not have the orginal disk.
When I press the sorce button nothing happens.
I did download the one to transfer data from the computer to the Palm.
I have windows XP Pro W\ Service pack 2 Also I have Vista on my Laptop
Post relates to: Zire 71
Message Edited by Reflection on 10-12-2008 11:40 AM
This question was solved.
View Solution.

Thanks cygnus Ill check out the page
I downloaded "Palm Desktop 4.1.4E for Windows"
When I try to hotsync through the palm Menu the Palm gives me this message "The Connection between your handheld computer and the desktop could not be established. Please check your setup and try again" Pressing the hotsync button on the dock does nothing. My dock connects with a USB I am running both OS on different computers I am having the same problem on both, My only thoughts are:1: Bad dock (Palm will charge on the dock)2: Dock needs a different driver
I tried to add the dock manualy through Add and remove hardware, still nothing.
The USB port is fine I have used it for other hardware.
Post relates to: Zire 71
Post relates to: Zire 71

Palm Zire 31

Similar Messages

Maybe you are looking for