PAM configuration file (/etc/pam.conf)

Need your expertise advice.
If the settings for kerberos v5 authentication are disabled, is it correct to say that it is not authenticating using Windows 2000.
Lawrence

There are several choices like LDAP, and pGINA
Read about blueprint online, you might find what you want.
http://www.sun.com/blueprints/0604/817-7043.pdf
http://www.sun.com/blueprints/0903/817-3594.pdf

Similar Messages

Common PAM configuration files

Hello,
I need to configure a few Arch machines in order to allow LDAP authentication.
Although two years ago it was proposed to redesign Arch PAM configuration files in order to use a few common modules, ike most other distros do, (FS#17188) nothing has been done yet, so configuring PAM to my purpose looks like being a pain (what the heck are gdm{,-autologin,-fingerprint,-password,-smartcard,-welcome}, anyway!?).
Did anybody work on this?

Hi
Thanks for your quick responce.
What we are trying to do is identify all users of SAP on an estate by scanning the workstations for womankind of common file that might be stored\cached on the clients. If possible a file stored within the users profile but if outside of that it doesn't matter. Either that or a registry entry or something.
Many thanks

Configuration files: ️ /etc/hosts - Count: 44 mean

I used etrecheck on my laptop because it is very slow and the result is below. what does it mean:
Configuration files: ℹ️
/etc/hosts - Count: 44

EtreCheck version: 2.1.5 (108)
Report generated 11 January 2015 23:23:35 GMT+3
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: one day 21:23:36
Disk Information: ℹ️
APPLE HDD ST500LM012 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (252.55 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 44
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[loaded] com.hzsystems.terminus.driver (4) [Support]
/Applications/Toast 11 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.16) [Support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.16) [Support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.16) [Support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.16) [Support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Support]
Startup Items: ℹ️
MobileBrServ: Path: /Library/StartupItems/MobileBrServ
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.CS5ServiceManager.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[not loaded] org.virtualbox.startup.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.google.GoogleContactSyncAgent.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[running] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive Application (/Applications/Google Drive.app)
BitTorrent Sync UNKNOWN (missing value)
AdobeResourceSynchronizer Application (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer Application (/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.2.0 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
MacCaptain [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Growl [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      8% Contacts
      7% WindowServer
      6% Safari
      4% CVMCompiler
      2% hidd
Top Processes by Memory: ℹ️
136 MB Safari
99 MB Mail
86 MB AdobeAcrobat
77 MB mds_stores
73 MB Finder
Virtual Memory Information: ℹ️
523 MB Free RAM
2.03 GB Active RAM
593 MB Inactive RAM
833 MB Wired RAM
14.81 GB Page-ins
267 MB Page-outs
Diagnostics Information: ℹ️
Jan 11, 2015, 09:17:03 PM /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-01-11-211703_[redact ed].cpu_resource.diag [Details]
Jan 10, 2015, 11:29:22 AM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-10-112922_[reda cted].crash
Jan 10, 2015, 02:00:53 AM Self test - passed

Novell-named Unable to lock file /etc/nam.conf..?!?

Getting this error on startup of novell-named
>>
# rcnovell-named restart
Shutting down name server BIND waiting for novell-named to shu(28s) done
Starting name server BIND Unable to lock file /etc/nam.conf.
Permission denied
<<
Seems superficial, as dns seems to work fine. However, wondering what/why/etc. Can't think of a relationship...
Anyone any suggestions?
Cheers
David

djbrightman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

[solved] diff /etc/pam.d/login /etc/pam.d/login.pacnew

... results in
2,21c2,7
< auth required pam_securetty.so
< auth requisite pam_nologin.so
< auth required pam_unix.so nullok
< auth required pam_tally.so onerr=succeed file=/var/log/faillog
< # use this to lockout accounts for 10 minutes after 3 failed attempts
< #auth required pam_tally.so deny=2 unlock_time=600 onerr=succeed file=/var/log/faillog
< account required pam_access.so
< account required pam_time.so
< account required pam_unix.so
< #password required pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
< #password required pam_unix.so sha512 shadow use_authtok
< session required pam_unix.so
< session required pam_env.so
< session required pam_motd.so
< session required pam_limits.so
< session optional pam_mail.so dir=/var/spool/mail standard
< session optional pam_lastlog.so
< session optional pam_loginuid.so
< -session optional pam_ck_connector.so nox11
< -session optional pam_systemd.so
>
> auth required pam_securetty.so
> auth requisite pam_nologin.so
> auth include system-local-login
> account include system-local-login
> session include system-local-login
Is it safe to use new /etc/pam.d/login?
Last edited by student975 (2012-07-05 11:54:37)

I assume that tomegun meant using the new one rather than booting with the old one. (The latter might also be fine - I've no idea.)
I'm a bit confused about the role which /etc/pam.d/passwd is playing now. Should options I've added here be duplicated for the password lines in e.g. system-auth? Currently, I have this in passwd:
password required pam_unix.so sha512 shadow nullok rounds=65536
but since system-auth etc. seems to have its own password lines, I'm wondering if having this in passwd is now either pointless or at least insufficient.
The default set up, if I understand it correctly, is not actually that different from the old one. The diff above is missing the additions:
> auth include system-local-login
> account include system-local-login
> session include system-local-login
I think this is invoking the stuff in /etc/pam.d/system-local-login which in turn calls system-login and system-auth, for example. If you compare the cumulative effect, I believe there are only minor differences which don't impact security e.g. to do with announcing the last login time or displaying message of the day.
EDIT: So adding that stuff all back into login just duplicates stuff with maybe some very minor differences such as requiring message of the day etc.
Last edited by cfr (2012-07-04 23:25:35)

Warning: config file /etc/pacman.conf, line 19: directive 'SyncFirst'

what is the new syntax for 'SyncFirst' in pacman 4.1?
greetings

Allan wrote:Merge your pacman files...
it's the first i make when update package (merge changes in /etc/makepkg and /etc/pacman.conf)
but need keep SyncFirst
# If upgrades are available for these packages they will be asked for first
SyncFirst = linux-headers linux-lts-headers
need this to update kernel headers before update kernel, because i use mkinitcpio to update DKMS modules [1]
if upgrade kernel before install headers, the build dkms modules fail
[1] https://aur.archlinux.org/packages/mkinitcpio-dkms/
related:
https://wiki.archlinux.org/index.php/NV … any_kernel
https://wiki.archlinux.org/index.php/Vi … any_kernel
Last edited by sl1pkn07 (2013-04-18 12:11:34)

Oracle Linux 6.6 I tried to edit the /etc/resplv.conf file on nano, gedit and VI but the result doesn't appear on the file when I cat it

Oracle Linux 6.6 I tried to edit the /etc/resplv.conf file on nano, gedit and VI but the result doesn't appear on the file when I cat it

Hi ! do you mean the file /etc/resolv.conf ? This file should be by default in the /etc/ diretory and contains the dns-name resolutions. http://linux.die.net/man/5/resolv.conf http://www.tldp.org/LDP/nag/node84.html http://en.wikipedia.org/wiki/Resolv.conf

Set systemwide variable with /etc/launchd.conf does not work in 10.10

Hi,
before i upgraded my system, i set in file /etc/launchd.conf some variables. I need this for the Shell, Eclipse and some other tools.
user@osx10-10:~$ cat /etc/launchd.conf
setenv M2_HOME /opt/maven
setenv MAVEN_OPTS "-Xmx2048m -Dmaven.surefire.debug=-Xmx2048m"
user@osx10-10:~$
With Mavericks there was no problem, since Yosemite no Variables are set.
Also when i try to set it manually with launchctl setting xxxxx xxxx, no variable is set.
Does anyone has a workaround for me?
Regards
Joerg

Alex It should work . by the way your PATH variable should be placed in /etc/paths like this :
/usr/bin
/bin
/usr/sbin
/sbin
/usr/local/bin
/Users/alex/Dev/apache-ant-1.9.2/bin
Note after each line there is a return key
As for environment variables open your ~/.bash_profile and place the.
export ANT_HOME = /Users/alex/Dev/apache-ant-1.9.2
launchctl setenv ANT_HOME $ANT_HOME
export ANT_OPTS = -Xmx512M
launchctl setenv ANT_OPTS $ANT_OPTS
make sure you save and restart all applications that need to read environment variables. I faced the same problem with intelliJ accessing M2_HOME
As a side note : consulting the man pages of launchctl(1)
DEPRECATED AND REMOVED FUNCTIONALITY
     launchctl no longer has an interactive mode, nor does it accept commands from stdin. The
     /etc/launchd.conf file is no longer consulted for subcommands to run during early boot time; this func-
     tionality was removed for security considerations. While it was documented that $HOME/.launchd.conf
     would be consulted prior to setting up a user's session, this functionality was never implemented.
     launchd no longer uses Unix domain sockets for communication, so the LAUNCHD_SOCKET environment vari-
     able is no longer relevant and is not set.
     launchd no longer loads configuration files from the network

List of configuration files copied to non-global zone

I understand that when a non-global zone is installed, the zone installation process uses "pristine" copies of quite a few configurable files (/etc/profile, /etc/syslog.conf, etc..) instead of the files which are configured in the global zone. Does anyone know exactly which configuration files are copied from their "pristine" versions instead of the files actually used by the global zone? Is there a list of all of these files somewhere? Where are the "pristine" versions kept in the global zone?
Thank you.

Where all information concerning specific packages is being kept. Namely /var/sadm/pkg.

Best Practive (Regarding Configuration Files)

I know that where you put configuration files is mostly an opinion, and we all could have different opinions.
However I came to a point where I have a preference. I prefer puting all my configuration files inside the conf folder (including the web.xml, struts.xml, etc) and then only using the Ant Script (build.xml) would I move this files where I want. For example the web.xml would be moved to the WEB-INF folder.
The advantege of this would be that I would have all of the configurations for my application localized in one placed, and not scatered everywhere.
The drawback is that my build.xml file will contain some deployment information, and more lines naturally. However the firsy one should not be a problem since at the end of the day the build.xml is there to develop a build (deployable version) of your application.
However this could be one of my most stupid post, just wanted some opinion on this.
thanks and regards,
sim085

I think that solutions go great for people that know
exactly what they are doing. For example, an expert
can easily decide to move something from one place to
another since he knows what advantege would that give
him, and what repercussions.
IMO, a good book should also describe options (and hence opportunities and pitfalls) for a source and/or deployment structure. Most probably just glance over the topic, but visiting vendor sites (say, Struts or Tapestry or Weblogic) will also give you additional ideas and constraints.
But for myself (which still consider myself as
experimenting) this is a little harder, since I still
did not master the basics. At the begining I adopted
a folder structure directly from a book I read. Only
now I am starting to think of what could I change,
and as you can see still have to ask some questions
here :$ :)
We've all been there. In fact, I'm struggling just to keep current with the technology stack I'm familiar with! :^)
IMO standards help juniors understand better, altough
you are right. I would not want something like
VS.net where the editing tool take care where to put
(nearly) everything.
Totally agreed. But as I think you yourself have hinted at, it's a tough balance to strike.
regards,
sim085- Saish

O2cb_ctl : unable to load cluster configuration file while RAC setup.

OCFS2: unable to load cluster configuration file
Hi,
I installed OCFS2 successfully.
I successfully install 3 RPMs.
I am getting error while running ocfs2console to do cluster configuration.
I tried to run this manully using "o2cb_ctl -C -n NODENAME -t node -a number=NODENUM -a ip_address=IPADDR -a ip_port=IPPORT -a cluster=CLUSTERNAME "
this commnd. but getting error as
"o2cb_ctl: Unable to access cluster service while creating node Could not add node "
Then I edited this file manually and copied to another nodes using SCP. Then tried to use o2cg_ctl utility as
# /etc/init.d/o2cb offline ocfs2
# /etc/init.d/o2cb unload
# /etc/init.d/o2cb configure
Configuring the O2CB driver.
Next, I configure /etc/ocfs2/cluster.conf:
cluster:
node_count = 2
name = oracle
node:
ip_port = 7777
ip_address = 140.187.222.222
number = 1
name = ocvmrh2053
cluster = oracle
node:
ip_port = 7777
ip_address = 140.187.222.222
number = 2
name = ocvmrh2051
cluster = oracle
Next, I try to load ocfs2 modules by command: o2cb load - everything messages is OK
And I try switch ocfs2 cluster to online (by o2cb online oracle), write this error message:
Starting cluster oracle: Failed
o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
Stopping cluster oracle: Failed
o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
I think both errors i get are due to same issue. Please kindly reply if anyone having idea.
Thanks.
Please anyone can help me to resolve this.
Message was edited by:
user596035

provide output of this command from all OCFS2 nodes:
ls -l /etc/ocfs2/cluster.conf
Regards,
Martin

Empty /etc/rc.conf? I got lost.

Hello,
I'm following the Beginners Guide provided in the wiki, the steps have been carefully written until the final step: the configuration. It seems that many things changed since that guide was written.
The file /etc/rc.conf is empty. Should I leave it that way? The guide is saying that many lines there need to be edited by me, but nothing is there. Is it a matter of adding them myself?
I've uncommented languages I need (ar and en), anything yet to be configured?
Regards,
Laser

You should try again, I guess.
There has been some bug report about this recently, maybe you should report there:
http://bugs.archlinux.org/task/8898
When I encountered this problem I hadn't select all needed packages the first time... since I wanted to do two separated installs of pacman and the filesystem package.... this didn't work however, after I did a new install it went fine again... not sure what it is exactly but hopefully next time you try it just works (use some magic ), else you should really report your problems and configuration to above bugtask.

Clusterware confused in /etc/ocfs.conf or /etc/ocfs2/cluster.conf

Hello,
This is very surprising sitaution . I installed ocfs2 ,when I finished installing clusterware it is asking for /etc/ocfs.conf and integrity check is failing.
OS RHEL 4 64 bit
ORACLE 10.2
anyone have clue that why clusterware is behaving like this?
Thanks,
S.Mann

More info...
I installed OCFS2 and when I check the inetgrity
the result is this
sh runcluvfy.sh comp cfs -n node1,node2 -f /u21
Verifying CFS integrity
Checking CFS integrity...
Checking existence of "/etc/ocfs.conf" file...
File "/etc/ocfs.conf" does not exist on the following nodes:
node2
Existence check failed for file "/etc/ocfs.conf".
Checking host-guid uniqueness...
Uniqueness check for host-guid failed.
Checking required run level configuration for ocfs...
OCFS is configured with proper run level on all the nodes.
Checking shared storage accessibility...
"/u21" is not shared.
Shared storage check failed on nodes "node2,node1".
==============================
Why it is /etc/ocfs.conf as this is not the feature of OCFS2?

Setting global umask via NSUmask or /etc/launchd.conf and /etc/launchd-user.conf broken?

The procedure to change the default global umask from 0022 to 0002, so that most files created by one user on a machine will be read-write by other users in the same group, seems to have been broken or to have been changed in OS X Lion from OS X Snow Leopard. What worked as far back as OS X 10.4 and was officially documented was done from Terminal: "defaults write /Library/Preferences/.GlobalPreferences NSUmask 2" (with a sudo, if not logged in as 'root').
Another way documented in various places and which I actually used through OS X 10.6 was also done via Terminal. Two files were created: /etc/launchd.conf (for system-wide global umask) or /etc/launchd-user.conf (for user-specific global umask). The contents of each were simply the single umask command, "umask 002" or ("umask u=rwx,g=rwx,o=rx", I can't remember which variant I used - they're functionally the same, though).
No matter which method I use, the 2nd or the 1st, the global umask no longer changes.
Does anyone know whether this has been deliberately hobbled under OS X Lion, requiring purchase of OS X Lion Server? Is this an OS X Lion bug? Or, am I looking at something wrong?

See this support article, which was written for OS X Server, but seems applicable to Mac OS X client versions as well:
Mac OS X Server v10.5, 10.6: Setting a custom umask
The excerpt below describes the use of /etc/launchd-user.conf, and strongly cautions against using /etc/launchd.conf.
Umask for user applications
In Mac OS X v10.5.3 and later, you can create the file /etc/launchd-user.conf with the contents "umask nnn". Do not include the quotation marks and replace nnn with the desired umask value, such as 027 or 002.
This will set the user's umask for all applications they launch, such as Finder, TextEdit, or Final Cut Pro, and control the permissions set on new files created by any of these applications.
Umask for system processes
In Mac OS X v10.4 and later, create the file /etc/launchd.conf with the contents "umask nnn". Do not include the quotation marks and replace nnn with the desired umask value, such as 027 or 002.
This will set the umask for all processes. Changing this value is strongly discouraged because it changes the permissions on files used by the system software. If the permissions are too restrictive, dependent software may not work. If the permissions are too open, they may introduce security issues.

Unable to Initialize Volume Manager from a Configuration File

I'd like to reattach a D1000 to a rebuilt system. The array contains a raid 5 partition that was built with Solaris Volume Manager (Solaris 9). Since it is the same system all controller/target/slice ids have not changed. I was able to restore the Volume Manager configuration files (/etc/lvm) from a tape backup and followed the instructions provided in the Solaris Volume Manager Administration Guide: How to Initialize Solaris Volume Manager from a Configuration File <http://docs.sun.com/db/doc/816-4519/6manoju60?a=view>.
All of the state database replicas for this partition are contained on the disks within the array so I began by creating new database replicas on a local disk.
I then copied the /etc/md.cf file to /etc/md.tab
# more /etc/lvm/md.tab
# metadevice configuration file
# do not hand edit
d0 -r c1t10d0s0 c1t11d0s0 c1t12d0s0 c1t8d0s0 c1t9d0s0 c2t10d0s0 c2t11d0s0 c2t12d0s0 c2t8d0s0 c2t9d0s0 -k -i 32b -h hsp000
hsp000 c1t13d0s0 c2t13d0s0
I then tested the syntax of the md.tab file (this output is actually from my secomd attempt).
# /sbin/metainit -n -a
d0: RAID is setup
metainit: <hostname>: /etc/lvm/md.tab line 4: hsp000: hotspare pool is already setup
Not seeing any problems I then attempted to recreate the d0 volume, but it fails with the error below:
# /sbin/metainit -a
metainit: <hostname>: /etc/lvm/md.tab line 3: d0: devices were not RAIDed previously or are specified in the wrong order
metainit: <hostname>: /etc/lvm/md.tab line 4: hsp000: hotspare pool is already setup
Any suggestions on how to reinitialize this volume would be appreciated.
Thanks, Doug

You have UserPrincipalName column heading in the csv file so this should be your cmdlet.
import-csv C:\temp\sharedMailboxCreationTest.csv | ForEach-Object {New-Mailbox -shared -Name $_.Name -Alias $_.Alias -OrganizationalUnit $_.OrganizationalUnit -UserPrincipalName $_.UserPrincipalName -Database $_.Database}
Blog |
Get Your Exchange Powershell Tip of the Day from here

PAM configuration file (/etc/pam.conf)

Similar Messages

Maybe you are looking for