Pan and Zoom with APP CS 5.5

Good morning,
I am a new user of APP ( previously I used Avid Studio). I am looking for the feature "Pan and Zoom" with panoramic pictures, up to 360°. With Avid Studio this feature is very simple and included as a standard video effect, but what with APP CS 5.5 ?
Many thanks in advance.
Sincerely,
Jacques

HIi Jeff,
Many thanks for your very prompt assistance and answer to my question.
I shall try in the next future and I shall inform you.
I apologize in advance if I remain silent for sometime.
Best regards.
Jacques Gourier
Le 15/04/12 17:42, SAFEHARBOR11 a écrit :
>
Re: Pan and Zoom with APP CS 5.5
created by SAFEHARBOR11 <http://forums.adobe.com/people/SAFEHARBOR11>
in /Premiere Pro CS5, CS5.5, & CS6/ - View the full discussion
<http://forums.adobe.com/message/4336032#4336032

Similar Messages

How do I use pan and zoom on vertical photographs without editing out most of the photo?

I am trying to make a slide show. When I have a vertically oriented (portrait) photograph and try to use pan and zoom, the feature eliminates much of the photograph. It seems the pan and zoom feature only works for horizontally oriented (or landscape) photographs. Is there a way to use pan and zoom on vertically oriented photographs to capture all or most of the photograph and zoom in from there?

gtavetian
I decided to use a different strategy to convey the principle. It is most likely that your photos will be 4:3 and you may or may not be taking them into a SD widescreen or HD widescreen project. With all those variables, to get the basic ideas across, I am going to use two models with a generalized scheme.
For this post....
NTSC DV Standard Project - Portrait Oriented JPG, in this case 2448 x 3264 3:4. Could be any Portrait Oriented JPEG any pixel dimensions. But best plan ahead for what you have and what you would like.
Manually set the project preset to NTSC DV Standard.
File Menu/New/Project and, in the new project dialog, set for NTSC DV Standard.
Before exiting the final dialog in that area, put a check mark next to "Force Selected Project Setting on This Project". Close out of there.
Next go to the Edit Menu/Preferences/General and remove the check mark next to "Default Scale to Frame Size". Close out of the preferences.
In the opened Premiere Elements Expert workspace, use Add Media/Files and Folders/Project Assets to get your portrait oriented JPG to the beginning of the Timeline.The 2448 x 3264 3:4 will overwhelm the space in the Edit Mode monitor. That is to be expected. The Timeline Indicator is at the beginning of the Timeline @ 00;00;00;00.
a. Click on the Timeline jpg to select it. With Motion Panel/Scale property (with Constrain Proportions with check mark), you want to scale the image so that the whole is shown within the mode space. You want to see the image's bounding box. See the next screenshot. The bounding box is the white outline around the image. It has handles.
After the scaling to get that look, the important information that you want is on the right in the Motion Panel
Position values 360.0 and 240.0
Scale value 14.6%.
The next phase is as before (See post 21 of this thread...but much of that is repeated below and modified for what is being described at this moment)
With Timeline Indicator at the beginning of Video Track 1 (00;00;00;00), go to Tools Menu/Pan and Zoom and click on it to open the Pan and Zoom workspace.
In the Pan and Zoom workspace, you will see that the feature has created the initial two Focus Frames for you.
Do not do anything to Focus Frame 1 in the bin below the image window.
Click on Focus Frame 2 in the bin below the image window and set the Focus Frame as wanted.
Click on New Frame in the panel to the left of the image window to create a third Focus Frame which will appear in the bin. Set Focus Frame as wanted.
Click on New Frame in the panel to the left of the image window to create a fourth Focus Frame which will appear in the bin. Set the Focus Frame as wanted.
Click Done to the Pan and Zoom workspace so that you are back in the Premiere Elements Expert workspace with its Timeline.
In the Expert workspace,
Move the Timeline Indicator to the last frame of the selected pan and zoom clip 1. In Applied Effects Tab/Applied Effects Palette/Motion Panel expanded, (Toggle Animation should be active at this point), make sure Position settings are 360.0 and 240.0 and Scale = 14.6% (with Constrain Proportions used).Then go to Tools Menu/Freeze Frame and set the freeze frame for 3 seconds and hit Insert in Movie.
Then move the Timeline Indicator to the first frame of the selected pan and zoom clip 1. In Applied Effects Tab/Applied Effects Palette/Motion Panel expanded (Toggle Animation should be active at this point), make sure Position settings are 360.0 and 240.0 and Scale = 14.6% (with Constrain Proportions used). Then go to Tools Menu/Freeze Frame and set the freeze frame for 3 seconds and hit Insert in Movie.
Render.
The Timeline content sequence from start to finish should be:
Freeze Frame 3 seconds First Frame of pan and zoom clip 1
Pan and zoom clip 1
Freeze Frame 3 seconds Last Frame of pan and zoom clip 1
Freeze Frame 3 seconds First Frame of pan and zoom clip 2
Pan and zoom clip 2
Freeze Frame 3 seconds Last Frame of pan and zoom clip 2
A Dissolve/Cross Dissolve Video Transition (1.00 seconds) is placed between end of Freeze Frame Last Frame of pan and zoom clip 1 and beginning of Freeze Frame 3 First Frame of pan and zoom clip 2.
Additional pan and zoom portrait oriented jpgs to the Timeline would be treated as above.
What was done above can be applied to any photo with any project preset. The basic idea is to
a. Start with determing the whole picture Position and Scale values as described with the Default Scale to Frame Size option disabled.
b. Do pan and zoom with Pan and Zoom Tool in its workspace
c. Return to Premiere Elements workspace to apply your Position and Scale values to the last frame of pan and zoom clip so that the last frame presents in full clip view. Then go to the first frame of the pan and zoom clip, and apply the Position and Scale values to it so that the first frame presents in full clip view.
d. If you want the whole view to present for more than that one frame, do the freeze frame at each end, with the wanted duration.
e. Apply emblessments as wanted, such as video transitions, an animated graphic flying through the last scene, etc.
We could take this same clip into a NTSC AVCHD Full HD 1080p30 project and do the same, except the Position and Scale values and the Scale % determined at the beginning and used subsequently will be different than in the NTSC DV Standard project.
Please check out the above and see how you do with it. If problems, please indicate where and we will work through them.
Thanks.
ATR

Pan and Zoom Extending Photo Duration in Premiere Elements 11

I am new to using PE11, but have been using older versions of PE for many years. In years past, after setting up my photos with voiceover and getting the transitions in, I have used keyframes to create pan and zoom effects. In 11 though, this function no longer appears to work so I am trying to use the Pan and Zoom tool. While easy to use, it is messing with the length of my photos. I already have the photos timed just right with my voiceover, so I need the length of time they are shown to stay the same. I can't figure out how to do this in the pan and zoom tool and everything I find online with this issue is with older versions of PE so the advice given isn't helping. If I'm able to use keyframes, that would be great too - but I'm not seeing how to add them under the Applied Effects tool.
If anyone is able to help me, I would GREATLY appreciate it. I'm on a very tight deadline for work and was not expecting PE11 to be so different from previous versions!

corifornia
With Premiere Elements 11 and 12, the photo that is panned and zoomed with its Pan and Zoom Tool is characterized by increased duration. It is what it is.
If you want to pan and zoom a photo using keyframing of the Motion properties of Scale (for Zoom) and Position (for Pan), then you would need to use Applied Effects Tab/Applied Effects Palette/ Motion Panel expanded and its Scale and Position properties there in association with Toggle Animation icon.
The shorter version of the Motion Panel Expanded looks like
To get the view where you can see the keyframes, click on the stop watch icon to the far right of the line with title Applied Effects.
Then you will see
Are you now on more familiar ground to move forward with your keyframing of the Scale and Postion properties for your
photo pans and zooms?
Please review and let me know if you are OK with the details.
Also, my blog post on Pan and Zoom Tool might be of interest.
http://atr935.blogspot.com/2013/05/pe11-pan-zoom-tool-more-than-one-photo.html
We will be watching for your results.
Thank you.
ATR

I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
Rodney
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

silkman1
I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
know if I am misinterpreting anything that you have written.
You have a video created in Windows Movie Maker.
How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
But, the pan and zoom effect is not seen in playback of the export.
Is all of the above correct so far?
If so....we are going to need some more details from you...
a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
Position (for Pan) in the Motion Panel expanded?
c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
so that we are in sync to resolve the issue.
Thanks.
ATR

Make a audio controller file move with a pan and zoom.

I am using a few folio overlays for a digital publication.
I have an image that uses the pan and zoom overlay.
I would like to add several play buttons for audio that are linked to the image so when you pan the image the audio files move with it.
So far I can only get the audio controller file to be static and the image move under it.

Here's a little trick for you. Before creating a scrolling frame, group the
text frame with a small no fill/no stroke frame. Now you have group in the
frame, you can drag additional objects in using the layers panel.

How to Pan and Zoom Video in Photoshop CS6 | The Complete Picture with Julieanne Kost | Adobe TV

In this video tutorial Julieanne walks you through the best way to pan and zoom a “time lapse” image sequences, video clip and still photograph using the new Motion options in Photoshop CS6. For those wanting even greater control, Julieanne also demonstrates how to use smart objects to take advantage of Photoshop CS6’s new Transform attribute in the Timeline panel.
http://adobe.ly/LiGN7k

Excellent video, 5 stars. I would like to see and video about exporting which is mentioned in this tutorial but there isn't such title listed below. Where is that video posted?

How to pan and zoom quicktime vr with iphone

does anyone know how to utilize iphone/ipad touchscreen capabilities to pan and zoom quicktime vr files?

does anyone know how to utilize iphone/ipad touchscreen capabilities to pan and zoom quicktime vr files?
The IOS based Apple players do not seem to support VR content.

Problems with Pan and Zoom after video has been saved

I have Adobe Premiere Elements 13 and I am running into a problem when I want to use pan and zoom. I watched a video that said you needed to have the picture larger than the video frame so that you have room for panning and zooming. The problem I am running into is after I create a video and play it back you can see all of the picture that sticks out past the video frame. It doesn't show up when you are creating the movie. Here is an example:
I do have a video overlaying this photo. It is the pinkish color that you see here in this picture. It doesn't show any of the picture that extends beyond the sides, just on the top and bottom.
I have tried having a different sized video frame. I have tried saving it as several different formats and this happens every time. Any suggestions on how to fix this? Any help is appreciated. Thanks!

No, I am not concerned about the playback buttons. Maybe this pic will explain it better.
From my project. You can see that the picture is larger than the viewable area so that there is room for the pan to occur.

Permanantly disabling "ken burns" pan and zoom?

I never want to see the Ken Burns "pan and zoom" effect in my slideshows. I find it annoying and dizzying!
Every time i create a new slideshow, this effect is on by default. I have to go into the settings selection for each slideshow, and un-check it. There appears to be no setting to automatically disable this. I even found a "SlideShowAutoPanAndZoom" setting in the .plist file, set it to "NO", but that doesn't stop the behavior.
Does anybody know if there's any way to do this?
Thanks

I have a similar problem with music. Why does it
default to playing music and why can't you change the
default? This is really annoying.
I too disliked the auto-music, but managed to find a "brute force" way to kill that. It ain't pretty, but it works:
- create a silent MP3 file.
- name it "Minuet in G.mp3" (which is iPhoto's default music choice);
- store it over top of the existing minuet which lives in /Applications/iPhoto.app/Contents/Resources/Music/

Simplifying the process of making lots of pans and zooms

I saw a plugin somewhere for helping to automate with creating lots of pans and zooms across images and videos, though I have no idea where it was. Does anyone know where I can find one? Anyone know if it is easier to do lots of pans and zooms in Motion vs. FCP?
Thanks.

It boils down to keyframe interpolation. < </div>
Boils down to creativity.
Easiest pathway to random Ralph Berns effects is iPhoto (or ay of the i-apps with links to your photo library).
If control over the action is not important to the OP, the quality of the rendered output cannot be important either.
bogiesan

Pan and Zoom not working or publishing. Help!

Did a "paste into" with a text block into a shape. The Pan and Zoom function is grayed out. It does show if I paste into with an image, but not text or other shapes, etc.
Also, on my iPad I have the latest content viewer app, but when I publish and download I get a message on my iPad that says I need the latest version. This only happens on my computers at school. Anything I published from home works fine. I also have the pan and zoom function at home.
I have all of the latest versions. 1.9.1, CS5.5.2, and the latest app on the iPad.
I even tried a reformat, install OS, CS5.5, updates then latest producer tools and folio builder and still have had no luck. Very frustrating. Anyone know how to fix this?
Thanks!

Hi Bob, wow quick reaction!
I am trying to create a scrollable frame for my iPad presentation.
First created blank frame, then a larger textbox, cut the textbox, pasted it into the smaller frame. When I go to the 'Overlay Creator' and open 'Pannen en zoomen' (Dutch for pan and zoom), all options are grey and not selectable.
I watched many tutorial, all explaining the same, seems so easy, but I guess I'm doing something wrong, or maybe I have an old version.
See screenshots.
I tried different selections of the containerbox (with open and closed arrow, frame box, container box), but that doesn't seem to make any difference.
I also just downloaded the 'AdobeDigitalPublishingPatch-All' for any updates, but still not working.
Many thanks in advance!

Easy way to do smooth motion pan and zoom on a video clip?

Howdy..
As a recent convert from Vegas and Premiere Pro, I'm very happy with FCP6, with 1 issue: Easy moves on video clips.
It's very easy to setup a move with the motion filter, but the problem is that zooming with moving on the clip with 'ease-in' is problematic.
The scaling and motion seem to accelerate at different rates, making it very tough to achieve a smooth pan and zoom at the same time (either one by itself is easy).
I've tried using anchor points, but that's difficult when doing several moves on a clip.
Basically, is there ANY way (either native or via a plug-in) to set up simple pan+zooms on a video clip, with smoothness turned on without having the 'slingshot' effect that you get? I know I can mess around with the acceleration points, but this is tough to do with 100 of clips that need adjusting.
I'd appreciate any help you can offer..
Thanks...
Best,
Ben

Howdy...
Usually I set easy-in/out on the canvas window (for center) and then 'smooth' on the keyframes (for scale) in the motion window.
Can you actually set smoothing for center in the viewer? I think you can only set easy-in/out for center in the canvas. (could be wrong on this one).
I wish it worked like in Motion. Much easier and more intuitive, but one shouldn't have to jump to a different app just to do a simple pan and zoom...
Any other ideas?
-Ben

Pan and Zoom, not working on Ipad 2

Hello,
Im having trouble getting a "pan only" to work on an image, on Ipad 2, it works fine when I preview it on my Mac, but when I go to double check it and preview it on my Ipad 2, tapping the image does nothing but bring up the preview app menu, and page srubber bar (the thing that lets you scrub page left and right).
All Im doing is creating a container/frame and inserting an image within that, its no bigger than 1024 by 1024, and selecting pan only. The magazine its self scrolls left and right. Like I said, it has no issue being previewed on a Mac, the trouble is on Ipad 2.
Am I doing something wrong? If so, is there a tutorial (in book form?) other than videos(where there is no trouble shooting)?
Thanks in advance.
Im using Indesign cs5.5 if that helps...

Hi Bob, wow quick reaction!
I am trying to create a scrollable frame for my iPad presentation.
First created blank frame, then a larger textbox, cut the textbox, pasted it into the smaller frame. When I go to the 'Overlay Creator' and open 'Pannen en zoomen' (Dutch for pan and zoom), all options are grey and not selectable.
I watched many tutorial, all explaining the same, seems so easy, but I guess I'm doing something wrong, or maybe I have an old version.
See screenshots.
I tried different selections of the containerbox (with open and closed arrow, frame box, container box), but that doesn't seem to make any difference.
I also just downloaded the 'AdobeDigitalPublishingPatch-All' for any updates, but still not working.
Many thanks in advance!

How to set the duration of each pic in a slideshow (and also how to pan and zoom)

I have about 30 pictures I would like to add to a slide show.
When I add them the duration for each picture is set to 6 seconds.
I would like this changed to 4 seconds.
But manually changing the duration of each individual picture, one by one, is a slow and tedious task.
Is there a way of changing the duration of all my pictures at the same time, from 6 seconds to 4 seconds ?
Or can I change a setting so that when I insert my pictures the duration is set to 4 seconds instead of 6 seconds ?
As for the pan and zoom, I have seen the pan and zoom effect but this has a black border around the pictures as they zoom in and out.
For example, when zooming in the picture starts small with a black border all round the edge.
When zooming out the picture ends small with a black border all round the edge.
Is there a way to pan and zoom starting with a full screen when zooming in, and ending with a full screen when zooming out ?
Thereby not showing any ugly black borders.
My Nokia N73 phone can do it !
You can view the pictures as a slide show and when it pans and zooms it looks so much better because it does not show any black borders.
The picture ALWAYS fills the screen even though it is panning and zooming.

If you go to Edit/Preferences, you can set the default duration for each slide. This will affect only those photos you've imported into your project AFTER changing this preference.
You should also turn off the preference for Scale to Frame Size, so your photos do not fill the screen. (And, for efficiency's sake, make sure your source photos are no larger than 1000x750 pixels, per the FAQs at the top of this forum.)
You can also set the duration of each slide by selecting all of the stills you want to include on in your slideshow, right-clicking and selecting the Create Slideshow option.

Pan and Zoom (Ken Burns Effect)

Does iDVD 06 support the Ken Burns Effect? When I import a Slide Show from iPhoto to iDVD it looses the transitions and the pan and zoom features. I can add the transitions back through iDVD, but I can't find anywhere to add the Ken Burns effect back to the slide show? Is it possible? I will be really disappointed if iDVD 06 does not support this feature.

Welcome to iDVD Discussions.
I don't use iPhoto, so I can't help you with that, but I can tell you that iDVD does NOT have the KB Effect.
iDVD 6 Getting Started PDF download
Apple's iMovie Learning Site
Apple's iDVD Learning Site
iLife ’06 Multimedia Tutorials
General Learning Center
Ken Stone: Authoring in iDVD 6
My favorite, by far:
iMovie HD & iDVD 6: The Missing Manual
You can download Chapter four: Camcorder Meets Mac.
iPhoto 6: The Missing Manual

Pan and Zoom with APP CS 5.5

Similar Messages

Maybe you are looking for