Pan & Zoom instructions help

I've wasted tons of time on this, I have a photo (about 7 sec.), and I'm trying set up pan & zoom. Can someone lend me some easy instructions. I've tried messing with the motion tab, but I can't quite figure it out. I just want to start the photo as is, and slowly zoom in during those 7 sec. of the clip. Thanks in advance.

http://www.fcpbook.com/MotionControl_inFCE.html

Similar Messages

Pan & Zoom multilayered PSDs. Help needed

Hi All,
I've got an edit I need to finish pronto then another one this coming monday and need to get some questions answered before then or in serious trouble!
Additional details: Running FCP 5
We have a client that wants to do an animatic (motion graphic add)
He want's to be able to import a multilayered photoshop image WHILST keeping the original image quality, if the dimensions are above 720x576 (I edit in UK therefore PAL pixel dimensions), so you can pan and zoom across the image while simultaneous fading up and down and moving certain layers.
I was originally going to edit it on an Avid Adrenalin but found out that you can do some but not all of these things without great difficulty. SO am therefore going to edit on my FCP suite.
I tried last night to import a multilayered photoshop image and made it double the normal 16x9 PAL pixel dimentions (which are 1204x576) making it 2048x1152.
Doing this I hoped it would let me try and achieve a pan & zoom effect, but I found that it distorted the aspect ratio of the clip.
Making it squashed, even though my new project that I had set up was Pal DV Anamorphic (16x9). It dispalayed the newly created large psd as eveen more anamorphic - more like cinema scope!!
I looked it the motion tap and the distort aspect ratio in the motion tab was zero.
I then did a test:
flattened the psd, changed the image size to 1024x576.
I then imported that and all was fine, it imported it at the correct ratio.
Also major question.
Is FCP able to handle these graphics easily.
When I import them and insert them into the new seq I can set that seq to Unlimited RT low playback to see the move easily.
But when I open the nest that has all the layers it wont let me set RT settings, it only displays a few options, none that allow me to view in low res.
The client wants to edit in DV not lower so cant do motion jpg offline res.
He also needs the large images, eg we pan across a models hair only to fade up a layer of a product appearing in her hand.
I don't know After Effects well enough to attempt the edit on that, and I don't know motion at all.
The photographer/ client says he's done all his previous edits in FCP.
Is there an article I could read or is there any advise anyone can give me about approaching this project?
Minimizing render time, work flow etc
Has anyone used Lyric Media's Pan Zoom Pro?? (Or was that used by people with FCP 4 and now FCHD can acheive Pan & Zooms really well???)
Thanks anyone for the help!!!!
d

Tom/ anyone else who can help,
(note: also posted on 2pop erlier, just incase Tom/anyone else read that one, saving you the trouble of reading twice!)
Sorry back again,
very nearly sorted after breakthrough last night.
Just need to clear up one more thing:
An FCP editor mate says he keeps the graphics he's given high res i.e. 300dpi, he says you can zoom in and keep the quality.
Can fcp handle bigger image resolutions? I know it can only go up to 4000 pixels squared but what dpi can it go up to. I always thought it would only work in 72 dpi.
Before finding about about fcp being able to handle higher than 72dpi, after numerous tests and conversations with you, I'd come to the conclusion that:
If designing in Photoshop for Final Cut Pro
If you don't use photoshop's PAL DV presets take this into consideration:
In graphics for 4:3 FCP projects:
768x576 convert to 720x576
1536x1152 convert to 1440x1152
always divide graphics width in photoshop by:
1.06666666667
In graphics for 16:9 FCP projects:
1024x576 convert to 720x576
2048x1152 convert to 1440x1152
always divide graphics width in photoshop by:
1.42222222222
I'm not sure of the actual size of the images the client is going to give me & I desperately don't want to get into the problem I had yesterday of distorted aspect ratios when importing to FCP.
The only question is
If he gives me a photo that's 300dpi I'm going to have a problem with knowing exactly what size the image will be in photoshop regarding rescaling etc.
When he gives me the graphics, I'll check the dimetions in photoshop.
I should check if it's a rectangular or suare pixel doc first correct?
My thinking is that it'll be square pixel coming from a digital camera, and we'll prob work in 4:3 (i've just been given video rushes to combine with the edit at 4:3 res)
Regarding the graphics,
Should I work in a high res and keep the pixel dimentions as high as I need up to 4000pix squared or should I keep it at 720x576 and keep the res high?
FCP works better with images at 720x576 they don't need rendering regardless of the dpi?? ANd also when you step into the PSD nest it gives you an option of Unlimited RT, it even has a dark green line in Safe RT.
Whereas when I work in images over 720x576, (say double that at 1440x1152) the PSD seq FCP creates when importing the multi-layered graphic has a red render line and won't let me work in Unlimited RT or Safe RT, it just gives the option of: 'use playback settings' or 'full quality'.
would it be good to create a photoshop template, so that I can drop the graphics I'm given into that, then manipulate it accordingly??
All advice welcome!!
Sorry finding if still finding it slightly confusing!
Almost there!!!!
thanks for reading
d

Pan & Zoom Not Working in PP4

Using PP CS4 with 8 years experience with Premiere, am having trouble with this effect. Effect Controls > Motion > Position & Scale controls are all there but the resizing for keyframes is not having any visible effect in either Source or Program monitors. The clip remains exactly as it was imported at full, uncropped view. Please help. Thx

Just for clarification, are you using the Pan & Zoom for a SlideShow in Encore, or are you using the Fixed Effects>Motion>Scale & Motion>Position in PrPro?
If the latter, then I would post to the PrPro CS4 and Earlier Forum.
In the meantime, and in case you ARE encountering this issue in PrPro, let's go over the steps to do Pans & Zooms in the Effects Control Panel.
First, in your Timeline, Select your Still Image (or Video Clip).
If not in focus, get Effects Control Panel open and in front in its Pane.
Place the CTI (Current Time Indicator) /Playhead at the first Frame of that Still/Clip.
Look at the Fixed Effects list in Effects Control Panel, and for Motion, twirl that Open, to reveal both Scale and Position. Twirl those Open, to reveal their sliders.
For a Zoom, click the little Stopwatch icon next to it, to toggle Keyframe animation ON, and place a Keyframe on that First Frame.
At this point, that Keyframe will have a value of 100%, or original size. If one needs to adjust that, say for a Zoom Out to full Scale, but needs to start Zoomed In, set it to where you wish to start.
Move to the time (on the Timeline, or on the mini-timeline in Effects Control Panel - the CTS's are linked), where you want the Zoom Out to end, and click the New Keyframe button, the filled circle in the ◄●► icon. A new Keyframe is added at that spot. Now, adjust the Scale to what is desired there.
One can adjust the Interpolation between those Keyframes, if desired, but that is something that one will be better off, if they read the full section on Keyframe Interpolation in the Help Files.
If one wishes to add a Pan, then the same process is repeated, but for the Fixed Effect>Motion>Position.
Good luck, and hope that helps,
Hunt

I can't change the pan / zoom duration in Premiere Elements 13

Ok I'm getting really frustrated especially after I just watched a video tutorial which clearly shows how to do this in Premiere Elements 10 and I have JUST purchased version 13!
What I'm not able to adjust is the speed or duration between focus frames in a pan / zoom; after it's set up.
You are supposed to be able to go into the PAN TOOL, and either click on the pan duration, or in the In the Pan Time dialog, scrub the time duration to the desired value, or enter a value in the dialog box, OR simply adjust / drag the focus frame markers in the timeline (like in the video tutorial I watched...) to change the pan duration. In my software at least NONE of these work. (All these from: Adobe Premiere Elements Help | Pan and zoom to create video-like effect)
I can't click on the pan duration, well if I do nothing happens, I can't even get a Pan Time Dialog box; so I can't do it that way; and lastly I can't click and adjust the focus frame markers in the timeline....none of it works and I can hardly believe that this is correct...the only way that I can adjust the pan time, is to delete the effect completely and start it over...this can't be correct can it??
Any help would be appreciated!!!

Ok yep you are great, so I'm sorry I'm attempting to do it on video clips, not stills.
I was aware that the last versions of PE had similar Pan and Zoom workspaces, that's why I knew or thought I knew that my situation could be solved.
The first link that you recommend is exactly where I got the third paragraph of my question, so I had already reviewed that and to me when you read the directive it still makes it sound like you can adjust the focus frame markers....? (very confusing)
The second link you sent might have helped me realize that the tool doesn't work the same way for Stills and it does for Video clips; (I really think like on the Adobe web site this difference should be markedly more clear to help with confusion; but in their defense maybe it's me being slow to understand)
I was able to figure out some of the difference through perseverance last night, and did figure out (like your last link explains) that you can move the CTI and then add a new focus frame...BUT I still have my original question...how can you adjust the pan duration on a video clip after it's been made and you have left the pan and zoom tool like if you want to edit that timing... I think the answer is that you can't lol, I think it has to be deleted or a new focus frame added and the other deleted to adjust the timing...am I correct?
This quote is taken from the Adobe web site one of the links you shared
You can work with focus frames in videos the same way that you work with focus frames for images. However, only those options that are relevant to movie clips appear in the pan and zoom tool.
I think maybe the last sentence is attempting to explain that but it's just so ambiguous...
Just trying to figure it out! I do appreciate your help!

What's the best webcam for Mac with tilt/pan/zoom?

I am trying to find a good quality webcam to use for videoconferencing with my Mac (MacBook Air actually). The camera is to be positioned on the 60-inch screen on the wall in our boardroom so the built-in Facetime camera doesn't do the job. It needs to have tilt/pan/zoom (in software). When I started on this search I had no idea such a thing was going to be so hard to find. There is no shortage of such products for Windows but I can't find a single one for the Mac.
There are a lot of webcams that claim to support Mac but on closer investigation not a single one of them (that I've found so far anyhow) provides any conrol features like tilt/pan/zoom - nor even brightness and contrast control for that matter. Maybe I'm looking in the wrong places because it's hard to believe the Mac world really is lacking such products. Can anyone point me in the right direction? Would be much appreciated.

You're most welcome, Julie.
dreamdoc wrote: ... I don't have a cam corder, but that's a great solution ...
If you are still shopping, you might be able to find a compatible used camcorder at a local store that sells used cameras or electronics. One with a failed tape mechanism that otherwise works would likely be very low priced. The same store may also have compact tripods.
Because your MBA is so portable, it is easy to take with you so you can test any camcorder before you buy to be certain it meets your needs.
dreamdoc wrote:... I also appreciate the reminder to close out my inquiry...
Per the Respond to answers tutorial page, you decide when to mark an answer that "solves your question."
I certainly did not intend any reminder. As a user like you, I have not authority to remind or otherwise instruct you about your participation in Discussions. As explained in ¶ 1.11 of Apple Support Communities - Terms of Use, the Apple Hosts would be the ones who would address any concerns with you if necessary.
Have fun shopping!
Message was edited by: EZ Jim
Mac OSX 10.8.5

Ease in/Ease out is clunky for pan/zooms

I'm using FCP 5 with 10.5.6. When panning and zooming around in a still image (photo), I just can't get an easy landing or stop at the end of the motion, no matter how I adjust the ease in/ease out speed. After choosing Ease in/ Ease out on a keyframe, I shove the little blue speed-control bead toward or away from the keyframe along the motion path, but that distance is limited, and I see very little difference in the result. The motion still stops with a perceptible jerk or clunk.
I have used applications like Photo-to-Movie that have great control on the speed of pans and zooms, and the motion of a pan or zoom starts or stops very gently and almost imperceptibly. Photo-to-Movie costs only $25, so I can't see why an expensive professional program like Final Cut can't do the same thing. I can do smooth pan/zooms in PTM, export the result as a DV clip, and then drop the clip into Final Cut, but I can't adjust the motion within FCP. And working in an outside application to import the results is a real slow-down.
Assuming that the Ease in/Ease out control is all the control you have for smoothing pan/zooms in FCP, and it's inadequate, is there any plug-in for FCP 5 (free or at least inexpensive) that will produce gentle starts and stops?
Tom

Thanks for all the comments everyone, and thank you also Tom Wolsky for your great tutorial books and DVDs that have helped me to gain some competence with Final Cut. I recommend them highly to anyone learning the program.
To shed some light on the purpose of my original post, the project I'm working on contains both video footage and still images. In this video I'm demonstrating how to paint pictures, while using still images of historic paintings as examples of how the old-time painters did things, compared to what I'm doing now.
So in this video I alternate from live demonstrations of painting, to still images of old paintings, slowly panning and zooming around the old paintings and stopping to analyze portions of them.
I find that there is something comfortable and soothing about good pan/zooms as compared to the unsettling feelings and irritation caused by watching jerky starts and stops, with unnatural acceleration and deceleration between.
You have all made it clear to me (thanks again) that it is a matter of the mathematics involved in Final Cut's treatment of pan/zooms that makes it hard to get smooth movements of that type in FC. I still think it's odd that I can get wonderful pan/zooms from a cheapie little program like Photo-to-Movie but not a pro application like Final Cut, but at least PTM can get the job done for me, although it is a slowdown to have to use it. I first have to create the pan/zooms on still images in PTM and then export them as DV clips to drop into Final Cut. If a pan/zoom then needs adjustment, I have to throw the clip away, go back to PTM and modify the movement, and then export a fresh clip. Very slow.
By the way, I visited the Photo to Movie website, which I haven't done for a long time, and I see that the price of the program has now doubled to $50. The authors have apparently gotten big ideas and have added transitions, titles, and other kinds of editing besides just movement. On their demo webpage <http://tinyurl.com/yfej3j4> you can see sample pans and zooms created by the program. The third sample movie down from the top, with the zebras, shows some of the types of motion I'm after, such as the scene that zooms gently in on the turtle's head or the dog near the end of that movie. Note how smooth the starts/stops are.
In my own YouTube movie <http://tinyurl.com/yh8hl38>, which I created in Final Cut in 2008, the paintings that leap out at you with music at the beginning were also created in Photo to Movie and dropped into Final Cut. In that case the motion is almost violent, and no doubt I could have done it just as easily in Final Cut, but at that time I was new to keyframing in Final Cut and had gotten so accustomed to the ease of doing such things in PTM that I used it for that too. A few minutes further along in that video you can see the kind of gentle pan/zooming by PTM that I'm trying to create again now in a new video. My failed attempts to do it in Final Cut a couple days ago are what led me to ask for help here.
Maybe if I can gain a better grasp of Motion 2 I could do better with it than my first attempt yesterday, and I could also also round-trip between Motion and Final Cut to quickly adjust the movements, but I just don't know the program well enough yet to do that. I'll search for tutorials and demo movies on Motion. Someone above has also said that Motion 2 is inferior to version 3 in this respect, and I don't have 3, so I guess I'm stuck with Photo to Movie for the present to get smooth pan/zooms.
Thanks again everyone for all the enlightenment on this subject.
Tom B.

Pan & Zoom in PRE7

I have Photoshop Elements7 and Premiere 7 and I have a few basic questions.
I prefer the pan & zoom effects in PSE7 over the presets in PRE7 when I make DVD slide shows.
I don't like the black box effect surrounding the image when zooming in PRE7 so is it possible to duplicate the PSE7 effect in PRE7?
Is there any "ideal" image size when importing my images? I understand the final image size would be 720 x 576 for a PAL system.
I note PRE7 manual states it can handle up to 4096 x 4096 pixels but I think that would use up an incredible amount of space on the DVD however as I understand it providing the files are in PSD format PRE7 will size them automatically to 720 x 576 for the PAL system. To allow for upsizing in a zoom I would need to have the image sizes say 1200 x 800.
Are my assumptions correct?
Regards,
Doug.

I don't know about your manual, but my books recommend you keep your images no larger than 1000x750 pixels in size. 4096x4096 would likely stop all but the most powerful computers right in their tracks -- and even if it did work, the program would likely choke during output to DVD.
So trust me. Keep it at 1000x750 or smaller.
There are a number of ways to do pans and zooms in Premiere Elements, so I'm not sure what you're comparing when you say pan & zoom effects vs. pan & zoom presets.
The presets are set up for various sizes of photos, as can be determined by the names of the preset For instance the 920x1280 Zoom In preset will work perfectly with a 920x1280 pixel photo. If you match the photo sizes with the preset you won't get a black box around the outside.
But the best way to get good, custom pans & zooms is to use keyframing.
I cover keyframing in my books -- and show you some advanced tricks with keyframing in my new "Cool Tricks & Hot Tips for Adobe Premiere Elements." I've also got a Steve's Tips article "Basic Keyframing PDF" you can download from the Muvipix.com site for free. I also cover it in my free "Basic Training with Premiere Elements" tutorials.
Finally, if you prefer to use presets, I've got a set of free presets made to fit perfectly with 1000x750 pixel presets. Instructions on how to use these presets are included with the download.You can download it here.
http://Muvipix.com, by the way, is a great resource for learning and mastering this program!

The Pan|Zoom component on a website?

Stumbled across the Pan|Zoom and want to use it on my website, have a large scale image to place in a small area, much to what the webpage I came across does: http://www.adobe.com/devnet/flex/samples/fig_panzoom/
Have managed produce it with my image in a SWF and Air file, although I am used to putting the swf into a html page, but then launch the page, the image doesn't show and the application does not work, as it needs the other files/code to run it.
Am I totally off track, as I want it just in one self containing swf... I am very much a newbie to flex/flash builder 4.
Any help would be greatful, haven't altered any of the orginal code just the image within it.
Thanks,
Matt

Hi,
I found a technique to pan/zoom somewhere on the 'net, can't remember where, but I adapted it to pan/zoom an image.
(Flex 3)
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" width="100%" height="100%"
    verticalScrollPolicy="off" horizontalScrollPolicy="off"
    creationComplete="initApp()" >
<mx:Script>
    <![CDATA[
        private var draggedObject:DisplayObject;
        private var imageMatrix:Matrix;
        private function initApp():void{
            imageMatrix = img1.transform.matrix;
       private function startDragging(event:MouseEvent):void{
            draggedObject = DisplayObject(event.currentTarget);
            this.addChild(draggedObject);
            event.currentTarget.startDrag();
        private function stopDragging(event:MouseEvent):void{
            event.currentTarget.stopDrag();
        private function onMouseWheel(event:MouseEvent) : void{
            // set the origin of the transformation
            // to the current position of the mouse
            var originX:Number = stage.mouseX;
            var originY:Number = stage.mouseY;
            // zoom
            imageMatrix = img1.transform.matrix;
            if( event.delta > 0 ){
                //limit zoom:
                if (imageMatrix.a > 3){
                    return;
                // zoom in
                scaleAt( 6/5, originX, originY );
            }else{
                //limit zoom:
                if (imageMatrix.a < .26){
                    return;
                // zoom out
                scaleAt( 5/6, originX, originY );
        public function scaleAt(scale:Number, originX:Number, originY:Number) : void{
            // get the transformation matrix of this object
            imageMatrix = img1.transform.matrix;
            // move the object to (0/0) relative to the origin
            imageMatrix.translate( -originX, -originY );
            // scale
            imageMatrix.scale( scale, scale );
            // move the object back to its original position
            imageMatrix.translate( originX, originY );
            // apply the new transformation to the object
            img1.transform.matrix = imageMatrix;
            //set the label's text:
            txtZoomLevel.text = 'Zoom Level: ' + imageMatrix.a.toPrecision(2).toString();
    ]]>
</mx:Script>
    <mx:Image id="img1"
        mouseDown="startDragging(event)"
        mouseUp="stopDragging(event)"
        mouseWheel="onMouseWheel(event)"
        source="assets/images/test/DSC01916.JPG"
        x="50" y="50"
        >
        <mx:filters>
            <mx:DropShadowFilter/>
        </mx:filters>
    </mx:Image>
    <mx:Text x="15" id="txtZoomLevel" width="137"
        color="#ffffff" text="Zoom Level:" bottom="20"/>
</mx:Application>

"Stuttering" when panning/zooming a still image...?

Hello.
I'm working on a small project which is basically a series of zooms/pans on still images. The pans/zooms are quite slow and take place over about 6-8 seconds. There's nothing too fancy going on here, but I notice that when I do a RAM preview or render out a comp, I get small "stutters" in some of them. Does anyone have any ideas why this would be happening and any suggestions on making these animations a little more "smooth". I mean, these things aren't complex at all, and overall they're quite smooth, but there's still times when I get these stutters and I can't figure out why they'd be happening? Would appreciate some advice!
Thanks,
Kristin.

There are certain speeds that sync up with frame rates so that they cause judders, jitters, stuttering or whatever you want to call it. The slower the frame rate the more obvious the problem.
If you've ever watched a western on TV or at the movies you've seen the stagecoach wheels turn backwards at various speeds. This is an example of the problem. It's actually called a stroboscopic effect. Mechanics, in the good old days when cars had carburetors and distributors, used to hook up a timing light to the #1 spark plug so that a light flashed on a timing mark on the crankshaft pulley. This light had the effect of stopping the rotation visually. That's exactly what's happening when you are moving your photograph across the frame at one of the critical speeds. Your eye is fooled and your brain can't process the movement smoothly.
There are also other cases where the sub pixel interpolation between frames causes areas of detail to flicker between frames. The latter problem can be seen by viewing your comp a frame at a time while zoomed in to say 800% and observing the edge detail. This problem can be especially nasty when you're trying to do a smooth title or credit roll. The horizontal lines that make up fine type can almost completely vanish between fields or frames if the text is moving at the wrong speed. You can test this out by creating a single pixel high horizontal line in AE and animating it from bottom to top of the frame. The only speed where you'll get a nice solid line in every frame or field is one that is an exact multiple of the frame rate. IOW, 1 frame 1 pixel of movement, 1 frame 2 pixels of movement, and so on. Move at 1 frame and 1.33 pixels of movement and the line will appear to completely disappear then return.
If you are working at 24fps progressive you'll find that the juddering caused by motion at critical speeds is much more problematic than projects at 29.97 fps. Interlacing, as was mentioned before, helps and gives you a wider range of motion, but interlacing can introduce more pronounced flickering in the detail if you are right at one of these critical speeds.
This problem extends to shooting as well. Cinematography manuals contain critical panning speed charts that list the number of degrees per second you can pan with various lens (angle of view) and shutter speed combinations. There isn't a videographer out there that's tried shooting 24P video and not ended up with an unusable pan due to these critical speeds.
The solution to successfully animating detailed images is to use the right speed (pixels per second) for your frame rate, add extra motion blur to hide the problem, or reduce the amount of detail in the image. These are the only solutions that I know of. They all limit design and timing, but what good is your design if it makes your eyes go buggy.
The best way I know if to tell if the problem is a playback issue is to use a device or program that tells you when you're dropping frames. You can use QT (by looking at the playback rate) or in FC or PPro by having the program report dropped frames. If it's a data rate issue you need more horsepower or a better codec.

How to automate pan/zoom ?

Version: Adobe Premiere Elements 12
OS: Windows 7
I do a lot of montages where the bulk of the video is from pictures.
Is there a way to automate pan/zoom in a random way that I can subsequently modify to my liking ?
Most times I have a lot of pictures, if I have to do picture by picture manually it will take me forever. It's not really an option...
I'm happy to buy an add-in if anybody knows of any.
Thank you,
Simon

Simon
After you have created your slideshow in Elements Organizer Create Menu/Slideshow and its Slideshow Editor, be sure to save it to the Elements Organizer as a Slideshow Project. For that, look to the top left of the Elements Organizer workspace. In the line directly below the lineup of File, edit, View, and Help Menus, click on "Save Project". The Slideshow project will be save to the Elements Organizer as a "Slide Show Project". Look to the top right corner of the saved slideshow's thumbnail in the Elements Organizer workspace. When you have your mouse cursor over that area, a pop up with confirm Slide Show Project. In this format, you can double click that thumbnail to reopen the slideshow in the Slideshow Editor workspace from the Elements Organizer workspace for further edits and re-saving to the Elements Organizer workspace. You can even right click that thumbnail in that location and select Edit with Premiere Elements (if you do not want to go back into the Slideshow Editor workspace.)
Now, if you are in the Slideshow Editor and want to move the finished Slideshow to Premiere Elements, then, in the Elements Organizer Slideshow Editor, go to the Output option at the top of that workspace and select Edit with Premiere Elements Editor. That will put your slideshow on the Premiere Elements Timeline as a whole video file. Here is the nice part. If you want to do further edits of this whole video file, right click the whole video file on the Timeline and select and click on Break Apart Elements Organizer Slideshow to give you the flexibility for further significant edits.
Please note the following details which must be included so that they do not come as a surprise...
a. Best set manually the Premiere Elements project preset before opening the Elements Organizer for the transfer to the slideshow to the Premiere Elements project. The following includes how to set manually the Premiere Elements project preset.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
Have you had time to read the Adobe document on creating slideshows.
Adobe Elements Organizer 11 * Creating slide shows (Windows only)
Please do not hesitate to ask if you need further clarification on anything written. We can fill in clarification, including screenshots if necessary.
Looking forward to learning of your progress.
Thanks for the follow ups.
ATR

Random pan & zoom effects?

I'm trying to create a movie from a lot of still images and I would like to have a pan & zoom effect to each image, but not the exact same to every image.
Is there a way to have a random pan & zoom effect applied to all images?

Steve: Thanks so much. As I am now just finding that I may be able to pan & zoon stills, but on my PE7 I cannot find a more button anywhere in order to select your import presets as below. Please help.
Thanks Tom
o install this set of presets in Premiere Elements:
1. Unzip this file to a folder on your hard drive
2. Open Premiere Elements' Effects and Transitions panel
3. From the More button, select Import Presets
4. Browse to the prfpset files, select them all (hold down the Shift key and select the first, then the last) and then Open
5. The presets will appear in your My Presets folder

Pan & Zoom plug-in experience

Anyone have any experience or review of the Pan & Zoom plug-in from stagetools.com (moving pictures) versus lyric.com (pan zoom pro? There is a significant difference in price.

I did the "search thingy" and it wasn't helpful. That's why I axed the question. < </div>
"Helpful" or just too much information for you to bother with?
My search for your term "pan and zoom" returned about 2,000 posts. I qucily cruised through about fifty within two minutes that referred directly to specific products or that mentioned "I like this one" or "This one stinks."
Most of the posts, truthfully, were similar to yours, someone asking for advice on what plugin they should consider buying for what should be a simple and elegantly fun task within FCP.
Here's my advice: "Buy After Effects. You'll never need another plugin for FCP."
bogiesan

Pan & Zoom option in Overlay Creator disabled/grayed out when trying to create scrolling text

Hi all,
I'm trying to create a scrolling text frame using the Paste Into method. I've created a long text frame, cut it, pasted into another frame. When I go to the Overlay Creator and click Pan & Zoom, it tells me to select a cropped image. I've tried an identical work flow on another computer and it works fine - the pan only radio button is available.
I've reinstalled the CS5 extensions, restarted my Mac and I can't resolve the issue. I only downloaded the extension tools last week, so I'd hope they aren't too out of date now. The About screen tells me I'm on 11.4.2.20111116_m_671500 7.0.3.13
Any help appreciated.
Adam

The best place to get the new builds is the DPS Dashboard (https://digitalpublishing.acrobat.com). You can also view the detailed help topic about installing:
http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-21ba9a4512e5e5e0b8d-7 ffe.html
If you install the Folio Producer tools and then the Folio Builder panel, you should be able to sign in just fine. Let us know if you still get the error.

Keyframing Pan/Zoom - How To Simplify?

I want to do a simple effect where I start the clip centered at 100% and zoom to off-center at 120%. So basically, keyframing size and position over the clip's length.
In order to do that, I do the following steps:
1. Select the clip in the timeline
2. Ensure the CTI is at the beginning of the clip
3. Select the effects panel
4. Open the position section and set a keyframe for size and another keyframe for position
5. Go back to the clip in the timeline and hit "End" to ensure CTI is at the end of the clip (the "End" key doesn't move the CTI in the keyframing panel)
6. Go back to the effects panel
7. Set a keyframe for size and another keyframe for position
8. In the monitor, use the frame to expand and move the frame as needed.Alternatively, type in a number in the zoom percentage field.
That's a lot of freaking steps to do something that I do a lot!
Ideally, I'd like to at least be able to click a single key and have PP automatically:
Create a zoom keyframe at the first frame of the selected clip
Create a zoom keyframe at the last frame of the selected clip
Create a position keyframe at first frame of the selected clip
Create a position keyframe at the last frame of the selected clip.
Does anybody know of an easy way to do this? I would think keyframed Pan/Zoom has to be one of the most common effects, and I can't believe it takes so much mousing and clicking to do such a simple effect!
I have a gaming keyboard, so I could program some keystroke macros, but I don't think I could program switching between panels so any solution would have to be entirely keyboard-based.
TIA!

That would definitely help, since it would avoid several trips back-and-forth between clip and effects.
I have noticed that thing where the keyframing seems to go one frame past the end. Was never clear on what the deal was with that - like do you need to go back 1 frame or not, and if so, is that a feature or a bug? I've always gone back 1 frame, too.
Something I found that looks promising is here.
I wonder if I can select a clip and put in the 4 keyframes (Position @ start; Position @ end - 1; Scale @ start; Scale @ end - 1) and then save "Motion" as a Preset with Type = Scale?
Then I could just apply that saved Preset Effect to any clip and automatically have the 4 keyframes added?
ETA: Another site here seems to say that will work. They call it the "Ken Burns effect".

Premiere 10 crashes during pan & zoom

Premiere Elements 10 crashes and shuts down if I use the pan & zoom tool for 5 to 10 pictures.
Please help me figure out what I am doing wrong.
Do I need to re-install the software?
Thanks

Thanks
I was afraid I might have to do a reinstall.
I basically do what you suggested as far as setting up my pictures in
Photoshop elements. Except I am using the MAC version.
I am new to both MACs and Photoshop. I will play around with the initial
settings to serif I can get the program running without crashing.
Thanks for your help.
"I can see clearly now."
"Let everyman be master of his time" because "Life is not measured by the
number of breaths you take but by the moments that take our breaths away."
"If I have seen further, it is by standing on the shoulders of giants"
Bone
St.Dominic Bonaparte
500 Tassy Ct. SE
ABQ, NM 87123-3710
Phone: 505-980-7300
email: [email protected]

Pan & Zoom instructions help

Similar Messages

Maybe you are looking for