Panasonic DVX100B gets "error communicating with camera"

Hi there,
I know this is the FCP group and this is an iMovie issue but wondered if you folks who are more advanced users might have some insight on this. I have a Panasonic DVX100B which continually gets "error communicating with camera" after a few minutes in iMovie HD 6. Works fine then has error with blue screen. iMovie works fine with isight and with small canon camcorder.
Thanks!
Bill

try Sue's fix for a known issue in iMovie;
http://discussions.apple.com/thread.jspa?messageID=1820549&#1820549
or
http://discussions.apple.com/thread.jspa?messageID=3167239&#3167239
are you sure the firewire cable's not been put in the wrong way? This can seriously fry the circuitry.
or do a further search in the imovie forum using your - error communicating with camera - narrative, there's a few useful answers.
Good luck and post back if you get any success or not!

Similar Messages

Error Communicating with Camera- Upload from Panasonic to iMovie

I am trying to upload the footage from my video camera, a Panasonic PV-GS320. I connected the firewire, and I open iMovie, but all that happens is that there is blue screen and in the middle it says "Error Communicating with Camera".
I thought maybe the camera had to be off, so I turned it off and the screen changed to say "Camera disconected or off". When I turned the camera back on, it gave me the "Error Communicating with Camera" message.
My dad was able to upload footage onto his laptop the exact same way I'm uploading into my mac.
Maybe I'm doing something completely wrong. I just want it to upload smoothly. Can someone help?
Message was edited by: mangamak1

Hi
Testing Camera and Cable is important - very common origin to problems.
Especially the Cable (fortunately)
I had a serious accident some Years ago. FW-connector on the back of that Mac
and I plugging in the FW-connector 180 deg wrong. Shouldn't go but sorry
to say did and without a gigant of effort.
Result: Killing two miniDV Cameras, one video bridge and one hard disk.
Tricky:
• Cameras behaved normally in all aspects except import/export to iMovie
- blue screen reading Camera connected
That's why it is essential to know that it works OK on another Mac.
Here comes my list: Use it with care. No guarantie from my part - just sharing
my thoughts.
Capture/Import problems:
a) File-Vault is on - turn it off
b) don’t Daisy chain camcorder - external hard disk - Mac
(except for some Canon-Cameras)
c) Slow hard disk (fragmented: repair permissions, repair hard disk, use a faster hard disk)
d) Something is occupying the CPU/System, like other programs, Internet etc.
e) Bad RAM-chips
f) drop outs on the miniDV-tape - make a camera to camera copy on a tape which You have previous recorded with a time code (dummy recording).
g) FW-wire cable OK?
h) Break in the time-code on the miniDV tape (make a camera to camera copy on a tape which is prerecorded with nothing/anything so that the tape has a time-code from beginning to the end)
i) defective camera TRY IT ON ANOTHER MAC !
j) remove bookmarks in iMovie project
k) Do You have desktop pictures or screen-savers active? Try turning them off.
l) Updating - OS has to be a clean install - not an update eg from X.3.x to X.4.x (no good)
OS X.4.0-2 needs a clean install to work (I use X.3.9)
m) Updating QT and/or other updates (to 7 needs v6 to be cleaned out first)
QT v.7 needs a clean install to work (I use 6.5.2)
n) Have you tried the crazy fix:
Open GarageBand, play a few notes, close it and reopen iMovie. The camera should import fine now. (Sue/SDillini)
o) NEW (from Sue/SDillini):
Trash the Font Collections Folder.
These files are found:
/YourUserName/Library/FontCollections folder.
Drag the folder to the trash and launch iMovie. iMovie will create a new FontCollections folder containing the files it needs when it next opens.
p) or thrashing the com.apple.imovie.plist file (Rodney Brown2)
q) - Other programs interfering like Flip4Mac
r) - Third party or old plug-ins
May be You find some help in my list:
Mac:
• hardware
◊ Slow hard disk (fragmented: repair permissions, repair hard disk, use a faster hard disk)
◊ I wonder how full your Mac's hard disc is. (David Babsky) A near full hard disk prevents Import/Capture.
10% free is recommended + space for Import/Capture + work space (about 4 to
5 times the amount needed for Capture) eg on a 200Gb hard disk You need 20Gb + (one hour tape)
13Gb + 50Gb = about 80 to 90Gb free space.
◊ Disconnect all other ext devices (FW and USB) exept Camera (and keyboard + mouse) and try again
◊ Rebuild Desktop (Tech-tool or fingersetting during start-up) (System up to 9)
◊ Reset PRAM (Tech-tool or keyboard finger settings alt-cmd-P-R ??)
◊ Reset PMU ( Restting the PMU...is the the alt-ctrl-shift and powerbutton shortcut? ) (Sue)
PMU: http://docs.info.apple.com/article.html?artnum=86760
PMU/SMU are essentially the same in the PM G5.
◊ Reset SMU
SMU: http://docs.info.apple.com/article.html?artnum=300341
◊ Bad RAM-chips
◊ disconnect Mac from powerline (not just switch off, really plug out) for a few minutes to reset FW ports
• software
◊ File-Vault is on - turn it off
◊ Something is occupying the CPU/System, like other programs, Internet etc.
◊ Do You have desktop pictures or screen or energy-savers active? Try turning them off.
◊ Updating - OS has to be a clean install - not an update eg from X.3.x to X.4.x (no good) OS X.4.0-5 needs a clean install to work (I use X.3.9)
◊ Updating QT and/or other updates (to 7 needs v6 to be cleaned out first) QT v.7.0.0-4 needs a clean install to work (I use 6.5.2)
◊ Have you tried the crazy fix: Open GarageBand, play a few notes, close it and reopen iMovie. The camera should import fine now. Sue/SDillini
◊ Running iDVD at the same time as iMovie can cause problems: (Lennart Thelander)
◊ If You also have installed FinalCut Express/pro there are possibly problems with this
◊ Other programs that interferes like Flip4Mac
◊ Codecs added to QuickTime
◊ Old plug-ins to iMovie or third party alike
iMovie:
◊ remove bookmarks in iMovie project
◊ Trash: com.apple.iMovie.plist and com.apple.iMovie3.plist : files (Xinram)
Connection:
◊ don’t Daisy chain Camcorder <--> external hard disk <--> Mac
◊ FW-wire cable, is it OK?
◊ USB/USB2 is NO GO !
◊ Cheque FW connection at Camera end. OK? (Adam Smith1)
◊ Cheque FW connection at Mac end. OK?
Camera:
◊ The Camera is set to VTR ? (not as when You ”film” record with it)
◊ You may be need to go to the Camera menu and select digital out.
◊ defective camera TRY IT ON ANOTHER MAC ! (if the A/D chip in the camera is harmed then it will say in iMovie that the camera is connected and You can forward resp. backward the tape but there will be no picture or sound just the blue screen).
◊ connect camera to power-line, not battery-only....(Karsten Schlüter)
◊ Canons don't allow daisychaining on firewire, make it "only device" on port (Karsten Schlüter)
◊ Cheque the menu on Your Camera so that it communicates with the FW digitally to Your Mac
◊ Date and Time is correct on Your Camera ?
Tape:
◊ Drop outs on the miniDV-tape - make a camera to camera copy on a tape which You have previous recorded with a time code (dummy recording).
◊ Break in the time-code on the miniDV tape (make a camera to camera copy on a tape which is pre-recorded with nothing/anything so that the tape has a time-code from beginning to the end)
◊ If You recorded in LP-mode (90 min on a standard 60 min tape with 12-bit sound). Try to change in iMovie pref. to import but not as individual clips. If this doesn’t work You have to make a Camera to Camera copy with the receiving Camera set to SP-mode and 16-bit sound.
More:
◊ follow advises here http://docs.info.apple.com/article.html?artnum=43000
◊ follow Grandmaster Dan's advice for Sony cameras here: http://www.danslagle.com/mac/iMovie/usage/5020.shtml
NEWS: Jerry Harris writes:
I know that in a lot of the new Sony HD cameras, iMovie requires that you turn i.Link Conv off. I would look for a similar setting for your camera. This setting has to do with shooting a movie in one format, and using the camera to import as a different format. For instance, if you shoot HD footage and have i.Link conv on - the camera will send DV to the computer etc...
So, case in point: look for a setting on your camera that has to do with the video format and see if that helps.
Yours Bengt W

Error Communicating with Camera (only during variable speed playback)

I have my camera, a Sony DCR TRV480 plugged in via firewire and am playing on the camera and watching on the monitor. This works fine unless I use the "variable speed playback" option on the camera to slow down the video. Then Imovie goes blue and gives me the "error communicating with camera" message.
My videos are way too numerous and the details of fine motion too important for importing and then playing back on slow-motion to be a practical option, so please do not suggest that.
What I need is to see in Imovie what I see on the Cameras LCD.
Any ideas if its a problem with Imovie or related to limitations of firewire or the camera output or what?

Obviously, when you slow down the video, the camera isn't sending a DV compatible signal through Firewire. Since iMovie is designed to handle only DV, iMovie goes blue.
There is nothing you can do about that.
You may try "JES Deinterlacer", which produces better slow motion than iMovie. It's free.

Service Manager "Error communicating with component" after moving SQL servers

We just moved our SCCM database to a new SQL server and ever since, I've been getting stumped as to why I'm getting the following error each time I try to query the status of anything under the SQL server:
Error communicating with component
Admittedly, I'm a total novice when it comes to SCCM and I was doing this under the loose supervision of my predecessor (this is his last week). I appreciate anyone offering any advice as to where I should start, and I apologize I'm not knowledgeable
enough yet to know exactly what info to provide you with initially!
Thanks!

Thanks for the quick replies!
@Peter: Currently using SCCM 2012 R2 running on a 2008 server, with the database having moved from SQL 2010 to 2012. We have a single primary site with 5 additional distribution points supporting around 260 users.
We did only change our SQL server and the guide you posted is the exact one we used. Everything seemed to look exactly like the guide. Afterwards, when checking the Configuration Manager Server Manager, under Servers, it had my SCCM server and
new SQL server both listed. The components listed under my SQL server were as follows:
SMS_COMPONENT_MONITOR
SMS_EXECUTIVE
SMS_MP_FILE_DISPATCH_MANAGER
SMS_OUTBOX_MONITOR
SMS_SITE_SQL_BACKUP_SCCM01
SMS-SRS_REPORTING_POINT
However, when we query those components, we get "Error communicating with component" on all of them except SMS_SITE_SQL_BACKUP_SCCM01. I'm slightly suspicious of our certificates but I'm not well-versed enough with them to troubleshoot effectively
on my own.

Error Communicating with server

I've completed 4 projects and all went perfect without a hitch. On starting a new project, I created 3 new bins, audio, stills, video. When I clicked on capture, I get "error communicating with server. If this continues, contact adobe tech support." I can't figure out why I'm getting this message now. I haven't changed settings, using the same HD camcorder, etc.
Any suggestions?

Fast response ~ thanks. I'm using the same camcorder I used on all previous projects: SonyHandycam, so I know it's not the camcorder I've had no problem capturing in the past.
The project settings: General>Action Safe & Title Areas are default settings; 20 and 10: Video display format: Timecode: Audio display format: audio samples: Capture Format: DV. In the Sequence settings, they have to be factory default cause I've never changed any setting there.
Actually I'm really stumped cause I just finished my Grandson's graduation video on July 10 and Premier and Encore worked beautifully. Now, trying to do a family reunion video, I started new project, didn't change any settings, and when I clicked on Capture, it said "Capture Device Offline". I went back and replugged in the camcorder, and still nothing. Closed program, thought about it for awhile, then when I reopen, I get the "error communicating" in the resource panel.
I doubt this will help you but I'm hoping......

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

I am publishing directly to an FTP server (option 1). Is this the optimal method or should I be publishing to a folder and then (how do/would I?) publish to my hosting domain?
I'm wondering if this has really anything to do with the publishing process, or whether it just has to do with the photos and/or the photo albums. I've deleted the photo albums with the missing pictures from my site on iweb thinking a file might be corrupt. (I'm getting the albums from iphoto -- drag/drop method into iweb) I then replaced these albums with the same albums as the previous ones from iphoto and then published my site again -- and the EXACT same photos were once again missing in the NEW albums as were missing in the old albums...
Maybe it is a publishing issue, or it could be a photo/file issue. However, these albums aren't very large -- the largest containing 135 photos --
Please! if you have any suggestions or ideas as to what is happening I would be greatly appreciative!
I'm pulling my hair out here trying to diagnose the problem...

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
Any other ideas?

Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
<Link Edited by Host>

There were no results for Hey i keep getting Invalid product context Error communicating with Adobe.

Hey i need help because i keep getting this when i try download after effects CS6 trial all other products ont do this but this
Hey i keep getting Invalid product context Error communicating with Adobe.com (Error 101) but only for Adobe After Effects CS6 all other product trials download but this one please HELP

And what are your system specs? it simply thinks your system doesn't qualify for AE, but it can't verify the settings.
Mylenium

Error communicating with server when trying to download a score in soundbooth cs5

I recently am getting back to some projects of mine. I went into Soundbooth CS5, and the Resource Central lists all of the scores and sound effects available to me. It says that i'm online, but then when I try to preview or download anything it gives me the following error:
"We're sorry, but there was an error communicating with the server. Please try again and if the problem persists, contact Adobe Technical Support (0) ioError: -1"
How do I get at the scores and sound effects? Is there a way I can download them so that I don't have to consult with the server anymore?

Soundbooth is dead and those servers are offline most likely. I haven't seen any official note on this, but that doesn't mean it couldn't be the case...
Mylenium

An error has occurred. There was an error communicating with the server. Please try again later.

I have a simple form which allows users to submit receipts as attachments. I have some required identifying information (name, etc.) and then three optional slots for attachments, along with optional text boxes for descriptions. The form tests fine with attachments on my computer and on a couple other computers we tested with.
However, I am getting complaints from several users that they see the following message when they hit "Submit": "An error has occurred. There was an error communicating with the server. Please try again later." Any ideas why this might be or how I can fix it?

Do you mind emailing the URL of your fillable form to me ([email protected]).
I would like to investigate as to what the issue might be with Internet Explorer.
Sorry for the inconveniences.
Gen

Error communicating with AdobeID server - DAY 3

So, I'm trying to activate the Digital Editions of Adobe on my MacBook, but I keep getting this darned message:Error communicating with AdobeID server. Please try again later.
What in the world is happening? I've been trying to get this to work for nearly 3 days. My classes will begin soon, and I'm REQUIRED to have this Adobe Digital Editions in order to download my books. WTH?! Can someone please help me get around this problem please?
Thank,
Monique

I'm getting the same problem. I'm in the UK
My error message is: E_AUTH_DATABASE_CONSISTENCY http://adeactivate.adobe.com/adept/SignInDirect AdobeID
(I have removed my ID)

TREX error 5500: NameServer error: communication with server failed

Hello TREX Gurus,
After applying the latest NW 7.0 SPS18, TREX is no longer working. We are getting this error message in the TREX Administration.
"5500: NameServer error: communication with server failed;connection refused,location=sap01:37001"
Any helps is greatly appreciated,
Dave

we have same problem... did you find a solution?
best regards

Can't activate on mac 10.7 Lion-Error communicating with server

I followed help to remove former install and manually install; tried to sign in and activate get same error as when I also tried "don't authorize andactivate" which was: Error communicating with AdobeID server. Try again later. E_AUTH_BAD_DEVICE_KEY"
I'm getting VERY frustrated with this new LION OS on this mac. I can't use OVERDRIVE media-it won't work, I can't use ADOBE, it won't work. I'm about to take it back to where I bo't couple days ago and go back to iPhone which overdrive ALWAYS works and forget all else!
If ANYONE knows ANY solution, since it seems one can never talk to a LIVE person at ADOBE to get help, I'd sure appreicate it.

The way that it is supposed to go, is that when you Launch ADE for the first time, there is a system dialog that supposed to come up and ask you for your login password, so that ADE can get access to the keychain to add the "Digital Editions" password entry.
If you cancel out of that dialog, or don't enter in the password, then you will get the "E_AUTH_BAD_DEVICE_KEY" error.
Make sure that when you launch ADE that this dialog doesn't come up behind ADE (minimize ADE).

Error communicating with the Cluster Manage Web Service

Hi,
i connected oracle database with the Endeca Studio but while uploading Departments dataset i m getting this error
"Error communicating with the Cluster Manage Web Service" so plz can anyone explain me wat is this error about.
thanks in advance

I actually ran into this myself- as Pat notes, it's hard to say without seeing log files, but I think that perhaps the default domain profile that the Endeca Server uses for domains created using Provisioning services has not been created. First see what domain profiles exist. Navigate to wherever endeca-cmd lives (e.g., user_projects/domains/endeca_server_domain/EndecaServer/bin), and use the list-dd-profile command:
-bash-3.2$ ./endeca-cmd.sh list-dd-profiles
The profiles that exist will be returned in your terminal window:
prov_dd_profile
default
If you only see 'default', then you will need to create 'prov_dd_profile'
./endeca-cmd.sh put-dd-profile prov_dd_profile
Then try uploading your file again in Studio.
Cheers,
Andrew

"Error communicating with AdobeID server"

Every time I try to authorize my ADE, I keep getting this error message:
"Error communicating with AdobeID server. Please try again later.
E_ADEPT_IO AddSignInDirect Error%20#2032"
I've tried to authorize it more times than I can count over the past few weeks - anyone know what I can do to fix it?
It used to work just fine, but then I started getting error messages on any books I tried to download and nothing I did would fix it, so I tried uninstalling then reinstalling and it won't let me authorize it now (I tried authorizing with a different ID too, to see if that was the problem but it wouldn't work).

Hi,
As per the error message that you are getting E_AUTH_BAD_DEVICE_KEYplease follow the steps as given below.
1) Open Adobe Digital Editions.
2) Press Ctrl+Shift+D key of your Keyboard and deauthorize Digital Editions
3) Move your e-books to some different Location.
4) uninstall Adobe Digital Editions from your computer.
     Click start>>Control Panel>>Add or remove Program
     Select Adobe Digital Editions from the list and Delete.
5) Also delete following files.
    Click Start>>Run
    Type "regedit" without quotes in the box and hit enter.
    Locate the following key "HKEY_CURRENT_USER>Software>Adobe>Digital Editions"
    delete the full folder (Right click on it and click delete).
     Also locate HKEY_CURRENT_USER>Software>Adobe>Adept
     Delete the full folder.
6) Now download and install Adobe Digital Editions from the link given below.
     http://www.adobe.com/products/digitaleditions/
7) When asked to authorize computer then please enter same Adobe ID and password and authorize the same.
I hope this will help you!!!
Regards
Rizwan

Panasonic DVX100B gets "error communicating with camera"

Similar Messages

Maybe you are looking for