Panasonic etc. DV camcorder not recognised by WinXP
I've finally got this working!!!!!!
I have an MSI-6777 mobo (K7N2GM-IL) with onboard 1394/firewire and by upgrading the BIOS from 1.3 to 1.5, and also installing all of the WinXP patches that I could find on the MS web-site, this now works.
I also made sure that the camcorder was plugged in and switched on prior to turning on the PC.
Hope that helps.
Hi Steve
Thanks for the advice but I am connecting with Firewire. I did have suspicions that it could be something to do with the IEEE-1394 driver but cannot work out how to update it. Would be obliged if you can give me some clues.
Windows 7
I have now set IEEE 1394 to legacy driver but have not tried Premier yet. Will keep you informed.
Thanks and Regards
Terry Cole
Similar Messages
-
My Panasonic SDR-H80 is not recognised by my mac - what do I need to download?
My Panasonic SDR-H80 is not recognised by my Mac - Is there anything I need to download?
have you tried to go to panasonic's website and see if they have some osx software for that model ?
-
Panasonic GS120 camcorder not recognised by premier elements
Panasonic dv camcorder GS120 not recognised by premier elements
Hi Steve
Thanks for the advice but I am connecting with Firewire. I did have suspicions that it could be something to do with the IEEE-1394 driver but cannot work out how to update it. Would be obliged if you can give me some clues.
Windows 7
I have now set IEEE 1394 to legacy driver but have not tried Premier yet. Will keep you informed.
Thanks and Regards
Terry Cole -
PM8M2-V RAID array not recognised by WinXP Pro
Greetings,
i'm just setting up a PM8M2-V system with 2 x WD 80GB JD SATA drives. In the RAID BIOS i have configured the drives to be RAID 0 (striped) for performance and made them bootable. From a IDE DVD rom, i'm running a WinXP Pro (corp ed - no pre-installed service packs) install but the OS will not detect any drives in the system.
I have downloaded the VIA_RAID_OM74.zip file from MSI VIA PIDE-SATA RAID Drivers and Utility for creating the RAID drivers and tried to create a floppy disk with the WinXP drivers on it using the embedded (and slightly cryptic) VIA MakeDisk.txt instructions.
Containined on the floppy disk are the following files/folders:
a:\TXTSETUP.OEM
a:\PIDE\WinXP\viapdisk.cat
a:\PIDE\WinXP\viapdisk.sys
a:\PIDE\WinXP\viapide.inf
a:\RAID\WinXP\viamraid.cat
a:\RAID\WinXP\viamraid.inf
a:\RAID\WinXP\viamraid.sys
*plus the other MS operating system files in the similar directory structure*
Problem - WinXP Pro does not recognise this created floppy disk as a hardware support disk and will NOT let the OS recognise the SATA RAID array as a drive.
Complete system specs
MSI PM8M2-V VIA P4800 + 8237R (RAID)
Intel P3 3ghz HT LGA775 CPU
2 x 512 DDR-RAM PC3200
2 x WD 80GB JD SATA drives configured in a RAID 0 Striped set and bootable
1 x IDE DVD D/L Burner (Master drive on IDE Secondary Channel)
ATI Radeon 9250 128m AGP Card
Web Excel 56K software modemDid you boot with WinXP CD 1st and then hit F6 to install the RAID controller drivers?
-
Hi folks
I've tried and searched discussions for help but........ Anyway can someone pls help as I have an 1TB Seagate FreeAgent GoFlex and want to use it as my Time Machine but it cant be verified, erased, partioned etc etc. Its not recognised in Finder either. Can someone pls HELP!!! (Thnx in advance)Thnx for the replies;
I have tried a different usb but nothing; The ext. HD is a year or so old.
The drive does show up in Disk Utility and states that S.M.A.R.T. Status not supported and also Partition is not formatted but as stated I cant do this!!! Ta -
My apple password is not recognised
When I want to download apps eg slot machine etc it does not recognise my password
Facebook requires iOS 4.3 or 5.0 or higher, neither of which the iPhone 3G is capable of running.
To get the media back on the new computer, copy the ENTIRE iTunes folder from the old computer to the new computer.
FYI backups do not include media or apps. The media and apps must be in the iTunes library on the computer. -
Since upgrading to the latest IOS, Airplay does not recognise my Pioneer vsx-1122-k on my iPad, I can control my receiver via the pioneer app on my iPad so it is just airplay not a connectivity issue. My Panasonic Stereo is recognised on Airplay.
Hi
I don't know if you're still having this issue but there is a way round it as I'm having the same troubles.
I've just spoken to Apple about it and found out:
– If you have a Mac made before Mid-2011, it doesn't have a piece of hardware needed to take advantage of the 'Airplay mirroring'
– So you can update to a later version 10.6.8+ but this won't help at all
The way round it:
– Download 'Airfoil' and install this
– You can then play music from any defined source (Spotify, Quicktime etc) through your Airplay connected speakers
So sadly, for those have a Mac from before Mid-2011 there's isn't an option that's as easy as Option-click on the sound icon to switch to Airplay speakers.
Hope that helps, I can now get on with the rest of my day now after sorting this out.
Adam -
my computer is telling me it does not recognise my ipdad mini and is asking me to restore to factory settings what happens if i do that will i lose all my photos, music etc? how do i get my computer to recognise my ipad mini?
Thankshave you backed up in the past with iTunes or iCloud? If so, it is possible that you will not lose this information, but I cannot guarantee anything.
Check for backups in iTunes by going to Preferences > Devices > Device backups
If you do not see any, and your iPad is still in working order, check for iCloud backups in Settings > iCloud > Storage & Backup
Also, if your iPad is still in working order, you can backup with itunes before restoring : http://support.apple.com/kb/HT1766 -
IDVD Onestep does not recognise camcorder
Hi, I am really hoping someone can help, I'm trying to copy from my video camera (Panasonic SDR-S26) to a DVD using iDVD's Onestep, however the program does not recognise the camera, therefore I can't get anywhere. Could this be because I have it connected with a USB instead of firewire? or is there some other reason? Any suggestions would be helpful.
Thanks in advance.I have a similar problem but the device not recognized DOES produce a DV signal going out over a firewire or DV cable ... The device is the Sony GV-D200 Digital8 video recorder which can play and convert to DV format tapes in the 8, high 8, and digital8 formats . One Step DOES control the device to rewind it to the start of the tape but then says there is no movie found at the point where it would normally start the vidcam and start playing the movie for processing .
The GV-D200 Digital8 video recorder should appear to be a video camera to any device receiving the dv signal over the dv cable or firewire . Frustrating because one step is ideal for me IF I can just set it up , start it and then go away for 4-5 hours while it inches its' way through the process ...one archived video in 8 or digital8 put to DVD every night ...IF I could get iDVD One Step DVD to recognize the dv signal coming from the GV-D200 Digital8 video recorder <<--- which is essentially the same as the guts of the early high end Sony digital 8 cameras that would play all three types of recorded tapes but only recorded in digital8 ..... -
Macs do not recognise camcorder
Hi, I work in a large school in England we have 12 new v 10.6.2 and FCP v 6.0.1.
We have a sony HDV 1080i HDR-FX7 camcorder and various small handheld sony DCR HC51's and some canon and psonics.
The high end students are making film with the HDV camcorder but we cannot get the footage off the camera.
Students have filmed in standard DV not HDV.
When I Plug the I link cable in this appears on the LCD screen saying that it has been inserted.
I have turned the ilink conv to off and used DV pal in easy set up but it is not recognised. i have also tried 1080I after dumping presets but this does not work either.
Finally I have tried putting the MiniDV's into the smaller cameras. The playback is fine but as soon as I link it to FCP and start capturing the images becomes blocky/pixalated and then stops capturing saying the tape may be damaged and cannot be viewed, however it still plays clearly on all of the cameras.
The camera is also not being recognised in IMovie.
Can anyone help with this?
If not is there another method for me to capture the footage?
Kind regards,
Shane.Firs trash your preferences, Trying lots of different settings is a good way to corrupt them.
Set the camera to output DV, not auto, not HDV. Set iLink on. iLink is used for DV capture. Connect the camera with no other devices connected (except keyboard and mouse). Set the FCP settings to DV 48k PAL Anamorphic. Is the camera recognized? If no, check System Profiler for your FireWire bus. If yes, open log and capture. What happens? -
I have just purchased a Panasonic TZ60 which is producing some good quality pictures. The camera can be set to save picture in jpeg, RAW and jpeg and RAW but I have been unable to download any RAW pictures into either iPhoto or Elements. Both programmes see the file but won't download and comes up with message saying file damaged or not recognised.
I have tried just transferring RAW picture file to my desktop and then into Elements, still no joy.Thanks John
Missed updating so went in search and found update path and that has resolved and can now pull in RAW, just need to crack iPhoto now and will be happy again.
Thanks for help
Garry -
80gb Classic iPod is dying on me (Not Starting, Not Recognised...etc)
Hi
I have an 80gb classic iPod and I am having major trouble with it.
It started with the iPod showing the Apple logo screen for a long time then a multilingual message saying I need to "Restore using iTunes" I have no problem with restoring, yet once I connect it to my Macbook Pro it is not recognised, not even in Disk Utility nor the USB list (from System Profiler). Now it doesn't even show the "Restore Using iTunes" message and just gets frozen on the Apple logo.
It does however charge, I attempted the whole resetting thing but to no avail.
Interestingly, the iPod automatically switches to 'Disk Mode' when I keep it connected to the computer, with the blinking "Do Not Disconnect" in old school screen. So I hurry to check with Disk Utility, NOTHING.
So basically nor iTunes or the computer recognise it, and I want to restore it but it's being non responsive and I could seriously use some help trying something on my own before the trip to the shiny Apple Dealer here.
Thanks in Advance.Well, here are a few other suggestions:
try a different cable - one of the pins on your cable may be damaged
try connecting to a different computer
try connecting it to a different USB port on your computer
try connecting it through a powered USB hub
If none of these work, the only other suggestion would be to bring it (or send it) somewhere for diagnosis and repair. There are a few sites here in the States that offer this service, and I'm sure there is something available in the UK as well. They tend to be less expensive than asking Apple to service an iPod.
I am not a Mac person (Windows for me), so I cannot give you any tips on attacking the problem from that side of things. -
i am trying to download a compilation of 8 cds which are not recognised by gracenote database. how do I ensure that the disks download seorately. My last try had all track 1/2/3 together rather than 1 - X in each cd
Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps -
How do I fix MMC could not creat snap in?/iPhone not recognised etc
My 3G Iphone is not recognised by iTunes. It does not appear on iTunes at all. Infact if I doc the iPhone Itunes wil not function at all. I get these messages:
MMC could not creat the snap-in. It might not have been installed correctly. Name Event Viewer: CLSID:FX:{b05566ad-fe9c-4363-be05-7a4cbb7cb510}
and
iTunes could not connect to this iPhone because an unknown error occured (0xE8000065).
and
iTunes could not connect to the iPhone because an invalid response was received from the device.
I hope they are all connected so that one resolution fixes it - I have tried lots of different things from the support pages - appreciate any help anyone can give.Hi,
This is normally caused by a corrupted system file, I suggest to use system file checker to repair the corrupt file:
1.Swipe in from the right edge of the screen, and then tap Search. Type Command Prompt in the Search box, right-click Command Prompt, and then click Run as administrator.
2.At the command prompt, type the following command, and then press ENTER:
sfc /scannow
As for more details, you can refer to this article:
http://support.microsoft.com/kb/929833
Also, the issue can be found and solved already in this post:
http://social.technet.microsoft.com/Forums/en-US/fb6e124e-4f9c-4873-b2e4-e229e144f1dc/mmc-could-not-create-snapin?forum=w8itprogeneral
Regards
Wade Liu
TechNet Community Support -
what do you do when new iphone 3 will not accept SIM card which it has been doing since I bought it 6 weeks ago but now suddenly No Service and will not recognise SIM. Had this trouble on initial start up, took a 3 hour conversation with Apple USA to get it going. Can't connect to itunes because it won't recognise the SIM. Cannot remember what we did to get it going last time as it took so long and we did so many different things. Any suggestions other than put it in the bin!
First, though the phone is "new" to you, it really is a 5 year old piece of equipment. Ancient by current standards.
Have you obtained a replacement SIM from your carrier?
Maybe you are looking for
-
Strange powerpill error - aria2 timeouts all the time [SOLVED]
Just installed Arch on a new machine and can't seem to get powerpill working. I installed it and simply commented out the reflect -l 45 line in the /etc/powerpill.conf as I do on all my machines and I also uncommented the Aria2Clean. When I try to
-
Make process manger send additional http header when querying WSDL ?
Hello, is there a possibility to send an additional, custom http header when process manager reads WSDL from a webserver. Backgrund info: all our WSDLs are hosted on a special webserver which needs this field. Changing to another kind of repository i
-
Integrating Jakarta taglibs in Jdev 9.0.4 (other than JSTL)
Hello -- I'm having difficulty getting the magic spell for proper integration of Jakarta taglibs other than the JSTL taglibs to work. I've gone into Tools->Manage Libraries->Jsp Libraries and created a new Jsp library based on the .tld file / archive
-
I purchased this phone on 10th Sept 2012. In the first week of October, the touch screen would not function, rendering the phone useless. I was informed that it was a software problem and would require the phone to be sent to the service centre for a
-
Can i convert a non layered file to a layered file bases on used colors?
can i convert a non layered file to a layered file bases on used colors?