Panasonic fax DATE problem with PAP2T
We have a Panasonic KX-FL613 LaserFax have connected to a PAP2T, and the date (and time) on the fax always changes to an incorrect date (and time), for example on this week to 1 February 2009. Our fax on an analog land line is never fails. Which settings in the PAP2T (or in the Panasonic fax) make this problem? Thank you.
I would try setting the NTP Server (Network Time Protocol Server) in the PAP2T to pool.ntp.org and also in the PAP2T setting your local Time Zone (relative to GMT)
Similar Messages
-
Having data problems with ios6, seems to be a unique problem?
My little brother recently bought an iphone 4s and imediately upgraded to ios6. Since the phone has been in use (less than 30 days) the phone company (bell a canadian company) claims he has used up 17 Gigs of data but the iphone counter says he has only used 5 gigs. I realize the counter may not be totally accurate but that big of a difference seems a little crazy. I also have an iphone 4s with the ios 6 and my data usage that my phone counter displays matches what my phone company says almost perfect (a few mb difference). The data amounts come in large chunks on my brothers phone and at very odd times such as: 1456.28 mb at 4:04 am, or 4268.07mb in one session. He does not use his phone for streaming or anything like that, We are aware of what uses large amounts of data and what does not. he uses it for facebook twitter web browing etc.
When talking to tech support one guy said that we could have a "lemon" phone claiming that a known problem with ios6 can cause the data to somehow get "scrambled" and completely making up data usage numbers to send to the phone company. According to him this makes it an apple problem.
My main question is has anyone heard of this? If so I am looking for articles talking abut this problem, we are looking at $1000.00 in overage chrges and are preparing for a fight with the phone company.
The counter has never been reset and I know that I use my iphone 4s much more than my brother (I stream utube and radio stations alllll the time, goole maps etc) and have never once gone over my 6 gb limit. It just seems quite crazy to me that the difference in the iphone data collector (about 5 gb) and what the phone company has (17gb) is so great. To me that is indicating a serious problem. Any input would be greatly appreciated!
Thanks
Crystalkleptul wrote:
I have upgraded from a SB Li've! to an SB Li've 24-bit, but I HAVE performed a complete format/clean install of WinXP SP2 to try to correct this problem. WinXP at first recognizes the card as a "Multimedia Audio Controller(the whole yellow "!" found in device manager). Upon installing either the drivers that came with the CD or the updated drivers from the website, the card works fine until I start the system up again, and I'm back at square one, having to install either set of drivers again(and rebooting) to have the card work properly once again. But after shutting down AGAIN... It's like I never installed the drivers in the first place. I'm running in a vicious circle here, like WinXP refuses to acknowledge the drivers permanently. I have formatted and reinstalled WinXP SP2 a total of three times now, to no avail. I'm a computer tech of 2 years and have NEVER seen a problem such as this. Each time the device manager comes up as "drivers for this device has not been installed". And from personal experiences/general knowledge, this does not sound like faulty hardware to me. It's THIS kind of instabilaty that makes me actually MISS dos! Um... help?
Hi
Sounds like your system don't recognize the sard (BIOS or OS).
Does your system recognize the card as a "Creative Li've! 24-bit" or something (is PnP functionality in use?) even it don't work? Is BIOS battery well?
Have you tried by installing Li've! in another PCI slot?
Is there some security settings set on XP, and are you installing with full admin rights? Can you find the driver files even when your card is not functioning?
Also, have you tried install drivers by executing the ctzapxx.exe found on installation package.
jutapaMessage Edited by jutapa on 0-06-2006 08:53 PM -
Live Data / Problem with file permissions
Just trying out an old version of Dreamweaver MX 2004. I am
using my webhosting service for remote server/testing server
duties. It is running PHP 4.3.10 and MySQL 3.23.58. I was able to
set up the database connection and test-retrieve a recordset with
no problems. In following the tutorial I found that Livedata
wouldn't work, it just giving me a warning about file permissions
being wrong. It turns out that when Dreamweaver creates a temporary
file of the work-in-progress to upload to the remote server the
file is created on the server with owner=rw, group=rw, world=r
which explains why it won't run - group has to be set to group=r.
The file is created on the fly and then immediately deleted by
Dreamweaver so it is impossible to manually set the permission on
the server and probably fairly pointless too.
I tried just saving the file and previewing in the browser
which again causes it to be uploaded to the remote server. The
first time this resulted in the browser offering a file download
box instead of running the page. The reason is - again - that
Dreamweaver is setting the uploaded file permissions to include
group=rw. If I manually set the permission for group to group=r it
runs fine.
It turns out that Dreamweaver is always setting the file
permissions on file uploads (checked php and html) to the
remote/testing server to include group=rw. Once I set it manually
on the remote/testing server to group=r for a php file everything
is fine and subsequent uploads of the same file do not change it
again.
I checked with the webhosting company and their second-line
have reported back to me that the default file permission they set
on uploaded files includes group=r so it must be DW that is causing
the problem by setting group=rw the first time. I confirmed this by
using WS-FTP to upload the same file (renamed) to the same target
directory and the permissions set were owner=rw, group=r, world=r.
So
Can anyone please tell me how to change the permissions DW
sets on files written to a remote server because I have spent
countless hours on it without success. From looking at other posts
in this forum it could be that other users are hitting the same
kind of problem with DW8Stop using Live Data with a hosting account. Set up PHP and
MySQL locally on
your machine. That is how it's supposed to work. You
shouldn't test files on
the fly on a host as you write them. Change your test account
in DW to use
the local server. Upload your files to your remote server
after they are
fully tested.
Tom Muck
http://www.tom-muck.com/
"nigelssuk" <[email protected]> wrote in
message
news:[email protected]...
> Just trying out an old version of Dreamweaver MX 2004. I
am using my
> webhosting
> service for remote server/testing server duties. It is
running PHP 4.3.10
> and
> MySQL 3.23.58. I was able to set up the database
connection and
> test-retrieve a
> recordset with no problems. In following the tutorial I
found that
> Livedata
> wouldn't work, it just giving me a warning about file
permissions being
> wrong.
> It turns out that when Dreamweaver creates a temporary
file of the
> work-in-progress to upload to the remote server the file
is created on the
> server with owner=rw, group=rw, world=r which explains
why it won't run -
> group
> has to be set to group=r. The file is created on the fly
and then
> immediately
> deleted by Dreamweaver so it is impossible to manually
set the permission
> on
> the server and probably fairly pointless too.
>
> I tried just saving the file and previewing in the
browser which again
> causes
> it to be uploaded to the remote server. The first time
this resulted in
> the
> browser offering a file download box instead of running
the page. The
> reason is
> - again - that Dreamweaver is setting the uploaded file
permissions to
> include
> group=rw. If I manually set the permission for group to
group=r it runs
> fine.
>
> It turns out that Dreamweaver is always setting the file
permissions on
> file
> uploads (checked php and html) to the remote/testing
server to include
> group=rw. Once I set it manually on the remote/testing
server to group=r
> for a
> php file everything is fine and subsequent uploads of
the same file do not
> change it again.
>
> I checked with the webhosting company and their
second-line have reported
> back
> to me that the default file permission they set on
uploaded files includes
> group=r so it must be DW that is causing the problem by
setting group=rw
> the
> first time. I confirmed this by using WS-FTP to upload
the same file
> (renamed)
> to the same target directory and the permissions set
were owner=rw,
> group=r,
> world=r.
>
> So
>
> Can anyone please tell me how to change the permissions
DW sets on files
> written to a remote server because I have spent
countless hours on it
> without
> success. From looking at other posts in this forum it
could be that other
> users
> are hitting the same kind of problem with DW8
> -
Binary data problem with web services on JRockit but not Sun JDK
I have a problem with binary data in SOAP and JRockit
(jrrt-3.0.0-1.6.0-linux-x64.bin) . I have an set of web services based
on EJB 3.0 which return images as byte arrays inside a SOAP envelope
to be consumed by .NET 2 services. The host app server is Oracle
Application Server 10.3.1 on RHEL Linux update 4, on 64 bit Xeon 5500
series HP blade hardware.
While most images are fine most of the time, one particular image
gives this message when being consumed in the .NET client:
The '■' character, hexadecimal value 0x1F, cannot be included in a
name. Line 2, position 380038.
The MSDN suggests that this is usually caused by non-escaping of reserved XML characters like < but this isn't one of those.
The SOAP looks ok and for the life of me I can't see why this ought to
be a problem, especially since the problem doesn't arise running with
the SUN JDK 1.6_06 64 bit)
When making the same call from the OAS Enterprise Manager, I can make the same call with no problem (but the data is just rendered as character data in a browser) which maybe suggests some incompatibility with how JRockit is serializing the data ?
Any ideas, I would be very happy to hear - JRockit gives a 15% or so
speed boost to the website that these services power so obviously we
want to use it if possible.
Edited by: RichLiv on Nov 14, 2008 4:54 AMSeems to be the case that using MTOM stops this problem with JRockit. Strange but apparently true (so far).
-
I bought a nokia 5320 xm a few days ago and i am really satisfied with it.
But i have got some problems with the date the always gets in advance within days.
For eg. i set the date to Friday 13 february 2009, afte 1-2 days, the date changes to Tue 17 feb 09. It always gets 4 days in advance and that's really annoying when setting new alarms.Can someone help me resolve this problem?
My firmware version is 4.12.
Should i update to 4.13? Is there a newer version?
For those who have 5320, from which country is it from? I didn't get from Finland so i took Korea. Is it of good quality?
Plz reply...Do you use the alarm clock and switch the phone off at night?
If so this is a common bug that has effected many models lately. The only workaround is to leave the phone switched on at night.
It may have been fixed in an updated firmware so check here for new firmware: www.nokia.com/softwareupdate
If no new updates are available then let nokia about the issue by using the "contact us" link near the top of the page.
The quality of your model is the same as the quality of Finnish models.
Message Edited by psychomania on 13-Feb-2009 11:07 AM -
Date problem with IST(+5:30) timezone
Hi,
I'm having problem with Timezone IST, which is GMT + 05:30.
SimpleDateFormat returns incorrect date when timezone on client machine is other than IST.
When Timezone on machine is IST, correct value is returned.
See the below example. All four dates are same ( LKT is also + 05:30).
When timezone on machine is IST, all four dates are displayed same.
For any other timezone, IST date is displayed incorrectly, rest 3 are displayed correctly.
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.Date;
public class Test {
public static void main(String[] args) throws ParseException {
SimpleDateFormat simpleDateFormat = new SimpleDateFormat("EEE MMM d HH:mm:ss Z yyyy");
Date date1 = simpleDateFormat.parse("Wed Sep 02 02:17:41 +0530 2009");
Date date2 = simpleDateFormat.parse("Wed Sep 02 02:17:41 IST 2009");
Date date3 = simpleDateFormat.parse("Tue Sep 01 13:47:41 PDT 2009");
Date date4 = simpleDateFormat.parse("Wed Sep 02 02:17:41 LKT 2009");
System.out.println(date1.toString());
System.out.println(date2.toString());
System.out.println(date3.toString());
System.out.println(date4.toString());
System.out.println("Date1 equals Date2? " + date1.equals(date2));
System.out.println("Date1 equals Date3? " + date1.equals(date3));
System.out.println("Date1 equals Date4? " + date1.equals(date4));
System.out.println("Date1.getTime() " + date1.getTime());
System.out.println("Date2.getTime() " + date2.getTime());
System.out.println("Date3.getTime() " + date3.getTime());
System.out.println("Date4.getTime() " + date4.getTime());
Output when timezone on client is GMT IST (GMT + 05:30):
Wed Sep 02 02:17:41 IST 2009
Wed Sep 02 02:17:41 IST 2009
Wed Sep 02 02:17:41 IST 2009
Wed Sep 02 02:17:41 IST 2009
Date1 equals Date2? true
Date1 equals Date3? true
Date1 equals Date4? true
Date1.getTime() 1251838061000
Date2.getTime() 1251838061000
Date3.getTime() 1251838061000
Date4.getTime() 1251838061000
Output when timezone on client is GMT (Casablanca):
Tue Sep 01 15:47:41 ACT 2009
Tue Sep 01 19:17:41 ACT 2009
Tue Sep 01 15:47:41 ACT 2009
Tue Sep 01 15:47:41 ACT 2009
Date1 equals Date2? false
Date1 equals Date3? true
Date1 equals Date4? true
Date1.getTime() 1251838061000
Date2.getTime() 1251850661000
Date3.getTime() 1251838061000
Date4.getTime() 1251838061000
Output when timezone on client is PDT ( -0800, -0700 for this date due due Daylight saving):
Tue Sep 01 13:47:41 PDT 2009
Tue Sep 01 17:17:41 PDT 2009
Tue Sep 01 13:47:41 PDT 2009
Tue Sep 01 13:47:41 PDT 2009
Date1 equals Date2? false
Date1 equals Date3? true
Date1 equals Date4? true
Date1.getTime() 1251838061000
Date2.getTime() 1251850661000
Date3.getTime() 1251838061000
Date4.getTime() 1251838061000
IS this a bug in java??
RegardsYour program is in error. PDT and LKT are not valid time zone ids in Java. There may be other problems, also, I didn't check.
I know this program produces valid results, you can try it
import java.text.DateFormat;
import java.util.Date;
import java.util.TimeZone;
public class DateTest
public static void main(String[] args)
Date current = new Date();
DateFormat df =
DateFormat.getDateTimeInstance(DateFormat.MEDIUM, DateFormat.FULL);
System.out.println("Default TZ: " + df.format(current));
df.setTimeZone(TimeZone.getTimeZone("IST"));
System.out.println(df.format(current));
df.setTimeZone(TimeZone.getTimeZone("GMT"));
System.out.println(df.format(current));
df.setTimeZone(TimeZone.getTimeZone("Etc/GMT-5"));
System.out.println(df.format(current));
}This program lists all of Java's time zones
import java.util.*;
public class TimezoneList
public static void main(String[] args)
int msPerHr = 3600 * 1000;
String[] ids = TimeZone.getAvailableIDs();
for (int n = 0; n < ids.length; n++)
TimeZone tz = TimeZone.getTimeZone(ids[n]);
System.out.print(
"TZ: " + ids[n] + " " + (double) tz.getRawOffset() / msPerHr + " ");
System.out.println(
tz.useDaylightTime() ? "DST=" + (double) tz.getDSTSavings() / msPerHr : "");
} -
Panasonic sdr-s150 / problem with aspect ratio
Hi all,
I'm about to purchase the sdr-s150 as it fits my needs regarding size vs. picture quality. Before doing so I wanted to make sure that footage from the camera can be edited with the all new imovie 08. And here's my problem with that.
I downloaded some 16:9 sample footage out of the internet and imported this into imovie 08. The icons imovie creates in the import and project areas are all looking good regarding aspect ratio. In the project settings I choose aspect ratio 16:9 and 'fit to frame' (don't know the exact setting in the english version) for the clips being added to the projects.
The preview of the clips and final export know shows black bars at top and bottom and the footage ist squeezed together.
I already tried sdcopy and ran the clips through this before importing into imovie 08. No change.
Any ideas ? Please also feel free to comment on the quality of the footage of this camera once processed through imovie from your point of view.
Thanks,
JasperJunker.hey there Derek100,
i've experienced the same thing w/ FCP & iMovie (in NTSC). it's that the FCP easy set-up is "anamorphic", which is a 4:3 image made to appear as 16:9 & so that is how FCP works w/ the image. i really have no other explanation. i suppose if you create a custom set-up, you could eliminate the bars @ the top & bottom. there should be something in the Manuals, though i don't know where--i've never looked. sorry not to be of more help, but now i'm gonna investigate for myself.
good luck. -
Javadoc for Date class has this definition -
Date(long date)
Allocates a Date object and initializes it to represent the specified number of milliseconds since the standard base time known as "the epoch", namely January 1, 1970, 00:00:00 GMT.
When i initialiaze a Date object with a long value of 0 it doesn't give me "the epoch" when i print out the string representation.
My simple test class is -
import java.util.*;
public class DateTest {
public DateTest() {
Date d = new Date(0L);
System.out.println(d.toString());
public static void main(String args[]) {
DateTest dt = new DateTest();
It gives me this output - Wed Dec 31 19:00:00 EST 1969
Can anyone let me know why there is a difference of 5 hrs between the epoch and the date object?Hi gurudasm!
Let us know if your time zone is GMT-5:00. -
App+IIS server role, WCF data problems with Shrepoint Foundation 2013 install on 2012 R2
Hi
I am having tremendous trouble installing Sharepoint Foundation on a Windows 2012 R2 domain controller.
The server has just been added to our domain, promoted and this is the first piece of software I am trying to install. I had run Windows Update after joining it to the domain and before making it a member server before it was promoted.
I had real problems getting AppFabric to install but that is now done. However when I run the Sharepoint prerequisite installer (As Administrator) a results screen is displayed stating there was a configuration error during the installation of the Application
Server Role, Web Server (IIS) Role. It also says that the installation of Microsoft WCF Data Services 5 was skipped.
I manually added the Application Server Role.
I have manually installed WCF Data Services, which was successful.
I have used this page
http://support.microsoft.com/kb/2765260/en-gb to try and get around the Application Server and IIS Roles error. The hotfix quoted on that page is not applicable to this system. I had to run a DISM command to create an image from the OS installation media
before the Powershell commands would work.
Next, I rebooted the server and ran the prerequisite installer again as recommended. However, exactly the same problems are reported.
Can anyone help me with this, please?
Thanks.
Prerequisiteinstaller log:
2014-07-08 15:31:20 - Processor architecture is (9)
2014-07-08 15:31:20 - Reading the following string value/name...
2014-07-08 15:31:20 - Common Startup
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-07-08 15:31:20 - The value is...
2014-07-08 15:31:20 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-07-08 15:31:20 - Trying to remove the startup task if there is any.
2014-07-08 15:31:20 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-07-08 15:31:20 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-07-08 15:31:20 - Locating the following command line arguments file:
2014-07-08 15:31:20 - C:\Program Files (x86)\MSECache\SharePoint2010\PrerequisiteInstaller.Arguments.txt
2014-07-08 15:31:20 - Error: This file does not exist
2014-07-08 15:31:20 - Details of the current operating system:
2014-07-08 15:31:20 - Major version number of the operating system: (6)
2014-07-08 15:31:20 - Minor version number of the operating system: (2)
2014-07-08 15:31:20 - Build number of the operating system: (0X23F0=9200)
2014-07-08 15:31:20 - Major version number of the latest Service Pack: (0)
2014-07-08 15:31:20 - Minor version number of the latest Service Pack: (0)
2014-07-08 15:31:20 - Platform ID of the operating system: (2)
2014-07-08 15:31:20 - Product suites available on the operating system: (0X110=272)
2014-07-08 15:31:20 - Product type of the operating system: VER_NT_DOMAIN_CONROLLER
2014-07-08 15:31:20 - Product type: (7)
2014-07-08 15:31:20 - OS type: (0)
2014-07-08 15:31:20 - Configuring the application's property sheet...
2014-07-08 15:31:20 - Check whether the following prerequisite is installed:
2014-07-08 15:31:20 - Windows Management Framework 3.0
2014-07-08 15:31:20 - Reading the following string value/name...
2014-07-08 15:31:20 - PowerShellVersion
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-07-08 15:31:20 - The value is...
2014-07-08 15:31:20 - 4.0
2014-07-08 15:31:20 - A higher version of the prerequisite above is already installed
2014-07-08 15:31:20 - Check whether the following prerequisite is installed:
2014-07-08 15:31:20 - Microsoft .NET Framework 4.5
2014-07-08 15:31:20 - Reading the following DWORD value/name...
2014-07-08 15:31:20 - Install
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-07-08 15:31:20 - The value is (1)
2014-07-08 15:31:20 - Reading the following string value/name...
2014-07-08 15:31:20 - Version
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-07-08 15:31:20 - The value is...
2014-07-08 15:31:20 - 4.5.51641
2014-07-08 15:31:20 - A post release .NET 4.5 is installed
2014-07-08 15:31:20 - Check whether the following prerequisite is installed:
2014-07-08 15:31:20 - Windows Identity Foundation (KB974405)
2014-07-08 15:31:20 - Reading the following string value/name...
2014-07-08 15:31:20 -
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-07-08 15:31:20 - The value is...
2014-07-08 15:31:20 - 6.1.7600.0
2014-07-08 15:31:20 - The prerequisite above is already installed
2014-07-08 15:31:20 - Check whether the following prerequisite is installed:
2014-07-08 15:31:20 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-07-08 15:31:20 - Reading version of the following file...
2014-07-08 15:31:20 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-07-08 15:31:20 - The version is...
2014-07-08 15:31:20 - 1.0.3010.0
2014-07-08 15:31:20 - The prerequisite above is already installed
2014-07-08 15:31:20 - Check whether the following prerequisite is installed:
2014-07-08 15:31:20 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-07-08 15:31:20 - Reading the following string value/name...
2014-07-08 15:31:20 - Version
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-07-08 15:31:20 - The value is...
2014-07-08 15:31:20 - 10.51.2500.0
2014-07-08 15:31:20 - A higher version of the prerequisite above is already installed
2014-07-08 15:31:20 - Check whether the following prerequisite is installed:
2014-07-08 15:31:20 - Windows Server AppFabric
2014-07-08 15:31:20 - Reading the following string value/name...
2014-07-08 15:31:20 - ProductVersion
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-07-08 15:31:20 - The value is...
2014-07-08 15:31:20 - 1.1.2106.32
2014-07-08 15:31:20 - Reading the following string value/name...
2014-07-08 15:31:20 - ProductVersion
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-07-08 15:31:20 - The value is...
2014-07-08 15:31:20 - 1.1.2106.32
2014-07-08 15:31:20 - Reading the following string value/name...
2014-07-08 15:31:20 - ProductVersion
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-07-08 15:31:20 - The value is...
2014-07-08 15:31:20 - 1.1.2106.32
2014-07-08 15:31:20 - Reading the following DWORD value/name...
2014-07-08 15:31:20 - DCC
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-07-08 15:31:20 - The value is (1)
2014-07-08 15:31:20 - CacheClient is Installed.
2014-07-08 15:31:20 - Reading the following DWORD value/name...
2014-07-08 15:31:20 - DCS
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-07-08 15:31:20 - The value is (1)
2014-07-08 15:31:20 - CacheService is Installed.
2014-07-08 15:31:20 - Reading the following DWORD value/name...
2014-07-08 15:31:20 - DCA
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-07-08 15:31:20 - The value is (1)
2014-07-08 15:31:20 - CacheAdmin is Installed.
2014-07-08 15:31:20 - The prerequisite above is already installed
2014-07-08 15:31:20 - Check whether the following prerequisite is installed:
2014-07-08 15:31:20 - Windows Identity Foundation (KB974405)
2014-07-08 15:31:20 - Reading the following string value/name...
2014-07-08 15:31:20 -
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-07-08 15:31:20 - The value is...
2014-07-08 15:31:20 - 2.0.1459.0
2014-07-08 15:31:20 - A higher version of the prerequisite above is already installed
2014-07-08 15:31:20 - Check whether the following prerequisite is installed:
2014-07-08 15:31:20 - Microsoft Information Protection and Control Client
2014-07-08 15:31:20 - Reading the following string value/name...
2014-07-08 15:31:20 -
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-07-08 15:31:20 - The value is...
2014-07-08 15:31:20 - 1.0.621.117
2014-07-08 15:31:20 - A higher version of the prerequisite above is already installed
2014-07-08 15:31:20 - Check whether the following prerequisite is installed:
2014-07-08 15:31:20 - Microsoft WCF Data Services 5.0
2014-07-08 15:31:20 - Reading the following string value/name...
2014-07-08 15:31:20 - Version
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-07-08 15:31:20 - Check whether the following prerequisite is installed:
2014-07-08 15:31:20 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-07-08 15:31:20 - Reading the following DWORD value/name...
2014-07-08 15:31:20 - IsInstalled
2014-07-08 15:31:20 - from the following registry location...
2014-07-08 15:31:20 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-07-08 15:31:20 - The value is (1)
2014-07-08 15:31:20 - The prerequisite above is already installed
2014-07-08 15:31:23 - Beginning download/installation
2014-07-08 15:31:23 - Created thread for installer
2014-07-08 15:31:23 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1.HTL\AppData\Local\Temp\2\Pre1B5C.tmp.XML"
2014-07-08 15:31:23 - Error: Unable to install (2)
2014-07-08 15:31:23 - Error: [In HRESULT format] (-2147024894)
2014-07-08 15:31:23 - Last return code (2)
2014-07-08 15:31:23 - Reading the following DWORD value/name...
2014-07-08 15:31:23 - Flags
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-07-08 15:31:23 - Reading the following string value/name...
2014-07-08 15:31:23 - PendingFileRenameOperations
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-07-08 15:31:23 - Reading the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-07-08 15:31:23 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-07-08 15:31:23 - Last return code (2)
2014-07-08 15:31:23 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-07-08 15:31:23 - Cannot retry
2014-07-08 15:31:23 - Check whether the following prerequisite is installed:
2014-07-08 15:31:23 - Windows Management Framework 3.0
2014-07-08 15:31:23 - Reading the following string value/name...
2014-07-08 15:31:23 - PowerShellVersion
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-07-08 15:31:23 - The value is...
2014-07-08 15:31:23 - 4.0
2014-07-08 15:31:23 - A higher version of the prerequisite above is already installed
2014-07-08 15:31:23 - Check whether the following prerequisite is installed:
2014-07-08 15:31:23 - Microsoft .NET Framework 4.5
2014-07-08 15:31:23 - Reading the following DWORD value/name...
2014-07-08 15:31:23 - Install
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-07-08 15:31:23 - The value is (1)
2014-07-08 15:31:23 - Reading the following string value/name...
2014-07-08 15:31:23 - Version
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-07-08 15:31:23 - The value is...
2014-07-08 15:31:23 - 4.5.51641
2014-07-08 15:31:23 - A post release .NET 4.5 is installed
2014-07-08 15:31:23 - Check whether the following prerequisite is installed:
2014-07-08 15:31:23 - Windows Identity Foundation (KB974405)
2014-07-08 15:31:23 - Reading the following string value/name...
2014-07-08 15:31:23 -
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-07-08 15:31:23 - The value is...
2014-07-08 15:31:23 - 6.1.7600.0
2014-07-08 15:31:23 - The prerequisite above is already installed
2014-07-08 15:31:23 - Check whether the following prerequisite is installed:
2014-07-08 15:31:23 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-07-08 15:31:23 - Reading version of the following file...
2014-07-08 15:31:23 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-07-08 15:31:23 - The version is...
2014-07-08 15:31:23 - 1.0.3010.0
2014-07-08 15:31:23 - The prerequisite above is already installed
2014-07-08 15:31:23 - Check whether the following prerequisite is installed:
2014-07-08 15:31:23 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-07-08 15:31:23 - Reading the following string value/name...
2014-07-08 15:31:23 - Version
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-07-08 15:31:23 - The value is...
2014-07-08 15:31:23 - 10.51.2500.0
2014-07-08 15:31:23 - A higher version of the prerequisite above is already installed
2014-07-08 15:31:23 - Check whether the following prerequisite is installed:
2014-07-08 15:31:23 - Windows Server AppFabric
2014-07-08 15:31:23 - Reading the following string value/name...
2014-07-08 15:31:23 - ProductVersion
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-07-08 15:31:23 - The value is...
2014-07-08 15:31:23 - 1.1.2106.32
2014-07-08 15:31:23 - Reading the following string value/name...
2014-07-08 15:31:23 - ProductVersion
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-07-08 15:31:23 - The value is...
2014-07-08 15:31:23 - 1.1.2106.32
2014-07-08 15:31:23 - Reading the following string value/name...
2014-07-08 15:31:23 - ProductVersion
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-07-08 15:31:23 - The value is...
2014-07-08 15:31:23 - 1.1.2106.32
2014-07-08 15:31:23 - Reading the following DWORD value/name...
2014-07-08 15:31:23 - DCC
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-07-08 15:31:23 - The value is (1)
2014-07-08 15:31:23 - CacheClient is Installed.
2014-07-08 15:31:23 - Reading the following DWORD value/name...
2014-07-08 15:31:23 - DCS
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-07-08 15:31:23 - The value is (1)
2014-07-08 15:31:23 - CacheService is Installed.
2014-07-08 15:31:23 - Reading the following DWORD value/name...
2014-07-08 15:31:23 - DCA
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-07-08 15:31:23 - The value is (1)
2014-07-08 15:31:23 - CacheAdmin is Installed.
2014-07-08 15:31:23 - The prerequisite above is already installed
2014-07-08 15:31:23 - Check whether the following prerequisite is installed:
2014-07-08 15:31:23 - Windows Identity Foundation (KB974405)
2014-07-08 15:31:23 - Reading the following string value/name...
2014-07-08 15:31:23 -
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-07-08 15:31:23 - The value is...
2014-07-08 15:31:23 - 2.0.1459.0
2014-07-08 15:31:23 - A higher version of the prerequisite above is already installed
2014-07-08 15:31:23 - Check whether the following prerequisite is installed:
2014-07-08 15:31:23 - Microsoft Information Protection and Control Client
2014-07-08 15:31:23 - Reading the following string value/name...
2014-07-08 15:31:23 -
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-07-08 15:31:23 - The value is...
2014-07-08 15:31:23 - 1.0.621.117
2014-07-08 15:31:23 - A higher version of the prerequisite above is already installed
2014-07-08 15:31:23 - Check whether the following prerequisite is installed:
2014-07-08 15:31:23 - Microsoft WCF Data Services 5.0
2014-07-08 15:31:23 - Reading the following string value/name...
2014-07-08 15:31:23 - Version
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-07-08 15:31:23 - Check whether the following prerequisite is installed:
2014-07-08 15:31:23 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-07-08 15:31:23 - Reading the following DWORD value/name...
2014-07-08 15:31:23 - IsInstalled
2014-07-08 15:31:23 - from the following registry location...
2014-07-08 15:31:23 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-07-08 15:31:23 - The value is (1)
2014-07-08 15:31:23 - The prerequisite above is already installed
2014-07-08 15:31:26 - Opening log file
2014-07-08 15:31:26 - Opened action for user
2014-07-08 15:31:26 - C:\Users\ADMINI~1.HTL\AppData\Local\Temp\2\prerequisiteinstaller.2014.07.08-15.31.20.logSharePoint is not supported to be installed on a Domain Controller (see http://support.microsoft.com/kb/2764086). You'll need to find another server.
But regardless, with SharePoint 2013, you need SharePoint 2013 with SP1 in order to install on Server 2012 R2.
http://www.microsoft.com/en-us/download/details.aspx?id=42039
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Hello
I have very strange problem, i have two computers
1.client computer - on this machine timzone is set to AZST
2.server computer - on this machine timezone is set to GMT+4
location are set to United States , both machines
so my swing application calls ejb2 method from client machine to server and passes date which is 31/08/2011(Wed Aug 31 00:00:00 AZST 2011)
but server logs it as 30/08/2011(Tue Aug 30 23:00:00 GMT+04:00 2011), i pass it by Date object , so my question is would it be better/helpful if i try to pass with long value and construct date on server side? or how is teqnique at this situation?The Date essentially IS the long value, it just has some (mostly deprecated) methods which allow you to treat that long value as a Date. So passing a long value doesn't fix the problem.
What we did when we had that problem was to pass a Date and a Timezone; the Timezone we passed was the default time zone for the client. On the server side we formatted the date using the timezone passed from the client, not using the server's default time zone. -
Custom InfoObject for date, problem with offset
Hi all,
I have a BEx reports presenting 0CALWEEK and another IO I created for dates.
This IO has the same properties as 0CALWEEK (but it was not created as a reference of 0CALWEEK).
In my report I'd like to use offsets for both IO's.
It works perfectly for 0CALWEEK, but it doesn't work at all for the other IO. Actually, only the first offset is shown. For all others weeks, I get "#".
Additionally, I made some calculations based on the week difference (using formula variables). Of course, every time a "#" appears, the calculation cannot be done (otherwise it works like it should).
Could anybody help me out with this?
Thanks in advanceHi Jagadeesh,
did I understand you correctly that:
1) offsets only work with standard characteristics? (this seems really weird to me...)
2) if I want to use offsets with with Z_* characteristic, I will need ABAP?
The problem is that I don't know anything about ABAP.
Do you know any "typical" code to use to resolve this type of problem?
Where do I have to use this code: in the query, in the IO, in a start routine somewhere?
Thanks -
FAX setup problem with Officejet 6700 Premium
Windows 7, setting up my 6700 wirelessly. If I have my printer connected directly to my Vonage device, no problems setting up FAX. If I then connect an extension phone to the second connection (2-EXT), it no longer works. I get a message indicating I am using the wrong phone cord (although I am using the HP provided phone cord).
Hi @Flamingo2100 ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English: http://h30434.www3.hp.com
Spanish: http://h30467.www3.hp.com
French: http://h30478.www3.hp.com
Portuguese: http://h30487.www3.hp.com
German: http://h30492.www3.hp.com
Korean: http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
Thank you
George
I work for HP -
E71 date problem with alarm on working days
I've a E71 (firmware : 110.07.127)
I use the alarm function to wake up me during the week. There is no alarm on week-end. I switch of my phone off every night and on the week end when on saturday i switch it on the date is the friday date. The time is the good one.
It's a problem because this morning my phone alarm does't work and when i turn my phone on the date was the last sadurday one
Solved!
Go to Solution.Yes, this is a known problem on S60 3rd Edition. Have a look at this thread.
FreeBird -
Output Variable - Type: Date - Problem with WSDL in Designer
Greetings,
We are seeking some information about the following:
We have a process in Process Designer that has and output variable of the type: Date. When the process is activated and we connect to a WSDL in LC ES Designer we get both a DATE and CALENDAR in the Data View.
Hope that is at least somewhat clear. Please respond with any help or questions.
Thanks,
Rick Kuhlmann
Tech-ProThis is to distinguish between java.util.Date and java.util.Calendar types. If the date is returned as java.util.Date, it will be in the DATE.date field. If the date is returned as java.util.Calendar, it will be in the DATE.calendar field.
There are a bunch of xPath dates function in the xPath builder you can use.
Jasmin -
If you edit the date of a photo. and then export it, it seems that this edited date is ignored; the date in the Information panel after re-import is now the creation Date, which is the processing date in the case of a film camera and the System date in the case of a digital camera. Both of these creation dates may be false!
(this comment reflects my experiences when exporting from iPhoto. 4 and then importing back into iPhoto 5)
Can anyone shed any light on this annoying fault?Hi, LarryHN
It seems that about half of my over 5k pictures are missing. The current page that I see when I open iPhoto has none of my recent albums. When I click on one of the pictures in an album, it may open up as a regular photo, or it may have the ! mark. Many of the spots where a picture should be is just a thumbnail sized rectangle. What is really funny, is that when I open the time capsule to try and replace the flawed page with an older one with all of the correct pictures, all of the time capsule iPhoto pages are just like the damaged one my computer. What I am doing is opening iPhoto, then clicking on Enter Time Capsule.
Thanks for any assistance.
Maybe you are looking for
-
Adobe Send within Acrobat XI Std - Integration with Outlook 2013
I recently upgraded a user from Office 2007 to Office 2013. The install for Office 2013 was a fresh install (not a true upgrade). Prior to the upgrade, the user was able to use the Adobe Send feature within Acrobat XI Standard (11.0.10) to send doc
-
Nokia 5220 WHITE SCREEN PROBLEM *Help plz*
hello guys ... my phone's (5220) screen has gone White ... !! i have absolutely no idea what the problem is ! i took out the battery and put it back again .. but when i turn it on ..after the nokia logo the screen goes white again !! i cant do anythi
-
Hi all -- I'm about to purchase a mac pro to edit a full-length film (appx 20 hours raw miniDV footage) and was curious about your recommendation for minimum RAM. I was planning to go with 2 gig because $800 is such a huge bump to go to 4 gig; would
-
What made you guys decide to release an update that forces the interface to smash everything together in a terrible mess at the top of the window? I appreciate that you guys did research to arrive at the new layout but making a release that forces th
-
On my iphone 4, 16gb, ios 5.0.1, youtube videos will not play, at all. I tap the video, it acts like it is loading and then immediately returns to the video description. I have done a hard reset, wiped history and data and cookies from safari...any