Panasonic GH4 is not listed in the "Lens correction Profile"

Hi there,
I am using Panasonic GH4 and GX7.
And according to my Lightroom 5, it is already the latest version but under the lens crorection profile. I cannot even find the word PANASONIC in the dropdown menu for cameras.
Any ideas and tips ?
Thank you

whsprague wrote:
I won't say that I understand this, but on 99jon's linked page there is "fine print" that says, "For Panasonic and Olympus cameras, automatic lens profile correction is supported on all raw files from Micro Four Thirds cameras."
(The statement is the last bullet point in the Tips section above the lens list.)
Yes, this is what I don't understand too.
While the fine-print says it supported Panasonic micro 4/3 cameras but Panasonic is not in the list of cameras that 99jon posted ...
Any ideas ?
Thanks

Similar Messages

Nikon D800 Camera not listed in the Lens Correction Filter under camera models in Photoshop CC 2014

I do not see a Nikon D 800 Camera listed in the Lens Correction Filter under camera models. Is there any way to update this ?

The lens distortion corrections are encoded in such a way that they are independent of the body of camera that they were determined with--in other words they are in terms of millimeters not pixels. The only issue is that lens profiles computed on a crop-frame body can't reliably be applied for the same lens on a full-frame body because the lens profile from a crop-frame body won't cover the entire full-frame lens image circle.
So as you're looking for a lens profile just make sure you're using a full-frame one if you have a full-frame or crop-frame camera, and don't try to use a crop-frame one on a full-frame camera. I'd expect Adobe only computes crop-frame profiles for crop-frame lenses, and uses full-frame camera bodies on full frame lenses, so there shouldn't be a problem.

Lenses not listed in the Lens Optimizer in Digital Photo Professional

As the topic title states my lenses are not listed in the Digital Lens Optimizer. I've placed the CD in the tray, and yet the program says it's connecting to the server, and when done, they are not found in the list. The lenses are:
EF-S 18-55mm f/3.5-5.6 IS II
EF-S 55-250mm f/4-5.6 IS II
Why are they not listed? How do I get them?
DPP version 3.13.0.1
EOS 70D / EOS Rebel t4i / EF-S 18-55mm f3.5-5.6 IS II / EF-S 55-250mm f4-5.6 IS II / Sigma 17-50 f2.8/ Canon EF-S 60mm f2.8 macro/ Canon EF 100mm f2.8 macro/ Tamron 70-300mm / 430EX II Speedlite / Canon FS 300
Canon Pixma MG 3100 / Canon LiDE 2100
Adobe Lightroom 4, Canon DPP, Corel Paintshop Pro X4

Of the lenses I have, the following are not supported by DPP 4 (However, they are supported "in camera" with EOS Utility 3)
Canon EF 50mm f/1.8 II USM
Canon EF 20-35mm f/3.5-4.5 USM
Canon EF 24-85mm f/3.5-4.5 USM
Canon EF 28-90mm f/4-5.6 USM
Canon EF 28-105mm f/3.5-4.5 II USM
Canon EF 28-135mm f/3.5-5.6 IS USM
Canon EF 75-300mm f4.5-5.6 USM
I don't care if they are "old" lenses or not. Why have the correction profiles for "in camera" correction (when saving/converting to JPG) and not in DPP 4? They have the data, they could just port it over from the database used in EOS Utility 3.
These lens correction profiles bring new life to some of the old "film" lenses like the Canon EF 20-35mm f/3.5-4.5 USM lens. That lens has lots of distortion. However with in camera correction, it now produces good pictures.
I am not a professional photographer. I am a photography enthuisasts. I'll NEVER spend $1,000.00 or more for an "L" series lens (in fact I sold the Canon 24-105 f/4 L "kit lens that came with my EOS 5D. It was way too heavy, and the zoom on the low end was cramped (only 4mm movement between 24mm and 28mm). I like/use my Canon EF 28-105mm f/3.5-4.5 II USM and Canon EF 28-135mm f/3.5-5.6 IS USM better.
Maybe my mistake is that I am using a program call Digital Photo Professional and I am not a professional. I noticed that that software leans heavily and supports the "L" series lenses.

Does the lens correction profile for the Canon 24-70 eliminate all distortion?

The new Camera Raw seems excellent in the Lens Correction...I will be photographing dancers and will have only 9 feet to work with. I would like to use the widest lens I can with lens correction. The question is whether this new program will flatten out the 24mm lens or if I should use the 35.
Roger Minkow

To add to Eric's great explanation, the corrections here are for barrel and pincushion distortion. That can be present in a lens of any focal length.
What isn't corrected is the effect in wide angle lenses where there is spreading of the image of three dimensional objects away from the center of the field. It happens at any distance, not just close up. It is caused by the extreme angle of projection from the back of the lens to the flat film/sensor plane. Think of a straight on photo of a building that has equal size columns across the facade with a wide angle lens. The columns at either end of the image appear wider than the (same width) columns in the middle. Retrofocus design wide angle lenses help a little bit (the rear of the lens is further from the focal plane than in a standard wide angle), but the distortion is usually there.
There is also distortion from being too close to the subject. Focal length doesn't really matter in that, except that longer lenses don't have the field of view to take in the close subject and can't usually focus that close. So we associate this distortion with wide angle lenses. This sort of distortion would be that where a person's nose in the middle of the frame looks very large and there is quick falloff in size to the eyes, ears, background. I think of this as more an issue of perspective, and this is controlled by camera placement, not by focal length or lens design.
Another good page on Paul Van Walree's site is http://toothwalker.org/optics/misconceptions.html
John

I don't get the Lens Correction Profile for Sigma 10-20?

I see several postings of people discussing the lens profile for the Sigma 10-20. As a proud 10-20 owner, that is the first profile I looked for in LR3, but in my (trial) copy I don't seem to have it - there's only the DC4.5, DC18-200, DG8, DG12-24, and the DG15.
Where can I find the Sigma 10-20 lens correction profile that others are referring to?
(Thanks!)

Vinkjes wrote:
That is confusing.... So I cannot see/use the Sigma 10-20 lens profile on any jpg picture ... ?!?
Is there no Sigma profile for jpg available?
Well....technically no.
However, I found this approach limiting so I converted all the Sigma-generated raw profiles to JPEG profiles. Yes, they might not be perfect, but they work better than nothing (actually, way better than nothing).
Inside each profile lcp file, you'll find tags that look like this:
<stCamera:CameraRawProfile>True</stCamera:CameraRawProfile>
or this
<stCamera:CameraRawProfile>False</stCamera:CameraRawProfile>
The first is for raw files, the second for JPEGs. There can be many such tags in each lcp file.
What I did was copy all the Sigma-generated profiles and replace all those tags in the copies. Voila! JPEG profiles for Sigma lenses.

Lens correction profile for the Canon 18-135 STM lens in Lightroom 5 ?

How or where can I get the lens correction profile for the Canon 18-135 STM lens in Lightroom 5 ? In effect he is not available in my list of correction lens so my lightroom is up to date apparently :/
Thanks in advance for answer.

There are two types of Lens profiles - raw and JPEG. It looks like you are trying to process a JPEG image and Adobe has only provided a raw lens profile for the 18-135mm IS STM lens.
You have four options:
1) Check for available lens profile using the Adobe Lens Profile Downloader. I checked and a JPEG lens profile is NOT available for the 18-135mm lens.
2) Follow the procedure outlined by Steve Sprengel in this post:
http://feedback.photoshop.com/photoshop_family/topics/lr_5_lens_profile_not_applied_for_jp g_captures_only_for_raw_captures
More detailed instructions here for a Pentax lens example:
http://www.pentaxforums.com/forums/post-processing-articles/176761-creating-adobe-lens-cor rection-profiles-jpgs-raw-ones.html
This allows using the available raw lens profile with JPEG images. To my knowledge Canon DSLR cameras do not apply distortion correction to JPEG images, so the raw profile should work well. You can check this by shooting raw+JPEG and comparing the two images inside LR
3) Create you own lens profile using the Adobe Lens Profile Creator. (A complicated process, but it can be done!).
4) Start shooting in raw mode or raw + JPEG mode, which will allow you to extract the most benefit from LR's processing controls.

Lens correction profile for the Canon 18-135 STM lens?

How or where can I get the lens correction profile for the new Canon STM lenses?

I see that lens listed in the release notes for the final Lightroom 4.2 update that just came out a few hours ago, so it looks like the answer is to download the update.
http://blogs.adobe.com/lightroomjournal/2012/10/lightroom-4-2-now-available.html

Lens Correction Profiles: Pasting develop settings in bridge yields inconsistent crop

Hello Everyone,
I recently discovered lens correction profiles which have been a real benefit to me in my most recent batch of images shot at 16mm on a Canon 5d MII. The lens distortion isn't always spot on, but it is a huge headstart most of the time.
I bracket photos for HDR and will apply all my crop settings to one image in the bracketed series and afterwards psate the settings onto all the others in the series. This works great.
However, once I started using Lens Correction Profiles, when I paste the crop setting onto the subsequent images, the crop is in a different position. I was completely baffled. But after some fiddling around, I noticed that if I manually open each of the subsequent images, remove the crop, uncheck and recheck the Lens Correction Profile, and reapply the crop, it is consistent with the first. This leads me to believe that somewhere in the Paste Setting sequence, it is doing the crop out of order. (As if it is cropping the image and THEN applying the lens correction--which yeild different results.)
(As a item of note, when I mean cropping, I use the automatic crop obtained by highlighting the entire area of the image after applying lens corrections so as to only crop out the grey areas acquired by shifting the image around while still maintaining aspect ratio.)
Is there any way we can get the pasting to paste so as to make these subsequent images identical to the original image? Or am I missing something?
Relevant Specs:
OS: Windows 7 Professional 64-bit
Bridge 4.0.4.2
Adobe Camera Raw 6.4.0.139
Photoshop 12.0.3 x64
Thanks,
Dave

Normally, when you apply a lens correction profile, there shouldn't be any visible gray areas around the border of the image.
Are you saying this is not the case?
Are you making additional distortion or keystoning adjustments (e.g., in the manual tab)?

Canon powershot G15 lens correction profile lightroom 4.4

has anyone built a lens correction profile for canon g15 powershot? i am new to lightroom and can't see this camera listed in the lens correction list although my pentax DSLR is there. any help gratefully appreciated - i am very new to lightroom so any help in idiot proof language greatly appreciated.

Yes redkaz,
If you go to the main lightroom forum page, on the right hand side, there is a Resources section.
Press "submit a feature request or bug report". There you can submit a feature request, and vote up others.
please let me know if you have any other questions,
janelle

I have a leica m9, aperture metadata will not show me the lens aperture used, as it does in lightroom 3, any ideas.

I have a leica m9, aperture metadata will not show me the lens aperture used, as it does in lightroom 3, any ideas.

This has been an ongoing issue with this camera for a long time. Search the list here or Google the issue to see the many posts on this.
For whatever reason Aperture is unable to report that data. Some have written that it is because the that particular lens/camera combination does not report the f stop information.
You can always send feedback to Apple see Aperture->Provide Aperture Feedback

Media Encoder CC not listed in the list of app in CC

I'm running Windows 7 Ultimate and I am a Adobe Creative Cloud for Teams member. I'm trying to install the new version of Media Encoder, but when i open Creative Cloud app it is not listed in the long list of apps. I have CS6 and CC installed on my computer.
Can you offer some suggestion how i can download and install this program?
I am trying to convert a mov file to webm and i am hoping Media Encoder CC can do that since I did not see a webM choice in media encoder cs6.
Thanks.

Brenadan Bolles (fnordware) has recently posted some beta versions of WebM exporters for Adobe Media Encoder. Details are here:
http://forums.adobe.com/message/5463405#5463405

Where is the photo tab on itunes? My device is not listed on the left side of my screen and there is no photos tab on the right of my screen. I want to delete photo albums that were synced through itunes to my ipad 3.

I synced several photo albums to my iPad 3 from my computer through iTunes. Now, I would like to remove them and have discovered that they cannot be removed except through using iTunes. Instructions that I've read say that once the device is connected to and selected from the list in iTunes, select the Photo Tab and then the folder that contains the photos etc. I never get that far because I do not have a Photo Tab to select in iTunes. How do I find this illusive tab so that I can delete these albums that are merely duplications of other pictures and are just occupying space. I need to get rid of them. Can anyone help me find the photo tab. I cannot move past that step until I do. Also, my device is not listed on the left side as stated in the instructions. It's in the bar on the upper right area of my screen and is automatically selected when connected. I am using the current version 11.1 for iTunes and IOS 7 on my iPad 3, if that helps.

I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

My country is not listed in the Mac app store and iTunes?

My country is not listed in the Mac app store or iTunes. and yes ive tried putting in false information like 'I live in the USA, NY' but whenever i try buying something it says "Your credit card information does not match your banks records, Please enter a US billing card.. and such. Because of this i have no choice but to use what you call 'pirated' applications. Any help fellow mac users?

Sorry, but it's Apple's policy...
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
The Complete Guide to Using the iTunes Store | iLounge Article

HT1539 I recently downloaded my digital copy of titanic and from the itunes extras screen I push play and nothing happens. The movie is not listed, only the itunes extra is listed in the list. How do I repair?

I recently downloaded my digital copy of titanic and from the itunes extras screen I push play and nothing happens. The movie is not listed, only the itunes extra is listed in the list. How do I repair?

I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

Provider Hosted App not listed in the App Part or Web Part

What I have done:
                I have created developer site collection
in office 365
                I have created a provider app in visual
studio, modified appmanifest.xml with the client id, client issue (from developer site) and provided targeted domain
                I have deployed web application from the
visual studio into Azure it can be accessible default page
I have published App project into Azure
What I tried:
                I have confiured app catalog in the SP 2013
office 365 developer site Central Admin where I can register my apps
                I have registered my appfile in the catalog
site collection
                I have created another site collection with
team site template and added the app there
                I created a web part page and wanted to
insert this app as a web pat in the page it is not appearing/coming in the app part to insert
What I wanted now:
                I wanted to insert this app in the site
web part page of any SharePoint 2013 site collection
                        App
part listed in the Site Content but it is not listed in the web part page " Web part or App Part" containers to insert...
Am I missing something? any one encountered same issue? Any help appreciated.
Regs,
Madhu

Hi Madhu,
Once you deploy your App, The App will get deployed to the App web rather host web. That is reason you will not be able to find the app either in App part or webpart section of host web.
http://msdn.microsoft.com/en-us/library/fp179925.aspx#IsolatedDomain
My Blog- http://www.sharepoint-journey.com| Twitter
If a post answers your question, please click "Mark As Answer" on that post and "Vote as Helpful

Panasonic GH4 is not listed in the "Lens correction Profile"

Similar Messages

Maybe you are looking for