Panasonic Lumix FZ1000 RAW files support in Lightroom 4

  http://blogs.adobe.com/lightroomjournal/2014/07/camera-raw-8-6-and-dng-converter-8-6-now-a vailable.html
The above says that Panasonic Lumix FZ1000 RAW files are supported in camera raw 8.6.  I specifically checked before buying the camera.  Everything I have ever read on the Adobe website for some 3+ years said that if a file in supported in Adobe Camera RAW, it is also supported in Lightroom.  Particularly, the above URL did NOT give any warning about the FZ10000 RAW files NOT being supported in Lightroom 4.  I went ahead and purchased the FZ1000, only to find I'm now having problem with Lightroom 4 not recognising the RAW files at all.  I'm really annoyed, as I was so careful to check the Adobe website first.  WHAT THE HELL IS GOING ON WITH CAMERA RAW AND LIGHTROOM?????

I do appreciate the many RAW file formats being created by the camera manufacturers, as I have had varying cameras with the varying formats, and so am very aware of the whole business of making sure how those formats will fit into my software.  And, as already stated, appreciate Adobe's efforts to deal with all those formats.
This whole exercise has been upsetting, and there has been some good advice and info provided in this discussion. 
And unfortunately, some input that has been a little too technical and not particularly helpful.  I feel that some of the input was a little too critical and didn't recognise that maybe some of us aren't so are highly involved and knowledgeable in Adobe products and the technicalities of how the software works, dot versioning of software, executable coding etc. because we don't need to, and shouldn't have to.  I have bothered to learn Lightroom well in terms of its functionality including matters raised by you (eg making LRoom edits visible in other software, knowing that LR is not making changes to the actual files, rather they are in sidecar or xmp files etc.).  I have bothered to learn a reasonable amount of computer-related info to understand things in plain English terms, such as "to have PShop and LRoom to recognise my RAW files, I need to have ACR.  To have them run on my PC, they must be compatible with Windows operating system version xxx.  For many people, this level of knowledge should be enough.
I have NOT said I expect Adobe to get advance copies of file formats from manufacturers;  I have NOT said that I expect Adobe to support every new camera model immediately.
The technicalities of the coding and whether Lightroom "uses" the ACR plug in or not is not quite so much the issue, and I don't find the statement that "Lightroom does not use the Camera Raw plug-in" helpful.  I don't think it's really right either.  Lightroom - one way or the other - DOES "USE" ACR as the ability of Lightroom to recognise files is very much dependent on the version of ACR that you have.  LRoom may not use the ACR plug in as PShop/Bridge in the exact same way (eg for the actual editing of files such as exposure, white balance etc.), but Lightroom DOES USE the ACR PLUG IN.... in regard to the file recognition issue.
And Yes....  I made a mistake.  Somehow, despite what I thought were good efforts to research the Lumix's support in PShop CS6, Bridge, ACR and Lroom 4, I got it wrong.  I will accept that it was my mistake and I'll accept my part in this, but I won't be made to feel that that it's been "totally" my fault, stupidity, whatever. 
Thanks to all the people who have provided useful comment and input to my original question and subsequent responses throughout this discussion.  I will indeed now consider options like the DNG converter.  I was aware of the whole cloud thing, and had been thinking I would upgrade in perhaps a couple of years time (for both Pshop and LRoom) - I'll have to consider upgrading sooner rather than later. 

Similar Messages

  • Does  PSE 12 and PSE 13 support Panasonic Lumix Fz200 raw files?

    Does PSE 12 and PSE 13 support Panasonic Lumix Fz200 raw files?

    Yes.
    See that FAQ: Photoshop Elements FAQ List
    In that list you find:
    FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
    And in that paper, you find two links, one for supported cameras:
    https://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    and ACR versions compatible with different Elements versions:
    https://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  • Download of latest Camera Raw to support Panasonic Lumix GX7 raw files

    I have downloaded the latest Camera Raw version for my Photoshop CS 5.1 as I have bought a new camera, Panasonic Lumix GX7.  Camera Raw still does not read these files in spite of the fact that the camera list shows that this camera is supported.  Please help. 

    According to Adobe’s list, you need at least ACR 8.2 to process GX7 raw files:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    According to this other list, you need at least CS6 to update to ACR 8.2:
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    So you either need to upgrade to PS-CS6 or sign-up for a cloud subscription, or download the latest DNG Converter that works with whatever OS version you have, from here:
    http://www.adobe.com/downloads/updates

  • Why can't i open my Panasonic Lumix FZ45 RAW files in CS3?

    why can't i open my RAW files?
    I have photoshop CS3 with camera raw plug-in 4.6.0.30 on MacBook Pro OS X Lion 10.7.5 (11G63) and a Panasonic Lumix FZ45
    I have checked the list of supported cameras and mine appears to be there.
    I have no available updates in photoshop so assume that I am up to date with those.
    Anyone have any ideas?
    thanks

    I have checked the list of supported cameras and mine appears to be there.
    Yes, the Panasonic FZ45 is listed but it was first supported by Adobe Camera Raw (ACR) 6.2.
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Then go to this table to see which versions of Photoshop are compatible with ACR 6.2: CS5 and later. Not CS3.
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    So your options are to upgrade to CS6 or subscribe to CC (check out the Photoshop Photography Program: PS CC + Lightroom 5).
    Or download the free DNG converter, convert all your FZ75 Raw files to DNGs then open the DNGs in CS3
    http://www.adobe.com/products/photoshop/extend.displayTab2.html

  • Lumix GX7 RAW files incompatible with Lightroom 4.4?

    Hello,
    I have used Lightroom 4.4 successfully with Lumix GF1 .RW2 files but I just discovered Lightroom 4.4 does not recognize Lumix GX7 .RW2 files.
    Do I need to upgrade to Lightroom 5? I checked for updates on 4.4 and I am up-to-date.
    Any advice would be helpful.

    Camera Raw plug-in | Supported cameras
    The GX7 was first supported in Lightroom 5.2.

  • Panasonic Lumix G6 RAW files

    Hi ive just got a lumix g6 but my emements 9 will not open them. Ive tried updating elements but it says it up to date.

    masalmon
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    It would appear that your Panasonic G6 was not supported until Camera Raw 8.1 which is not supported by your Premiere Elements 9.0/9.0.1.
    Even if it were, you might run your version blocking the raw image import because of size.
    http://forums.adobe.com/thread/624979
    The above is a Premiere Elements 8.0/8.0.1 thread, but it is applicable to version 9.0/9.0.1 as well.
    Please review and consider.
    Thanks.
    ATR
    Add On....You can use raw and dng images in Premiere Elements, provided that you have installed a version of Camera Raw that supports your camera AND Premiere Elements supports that version of Camera Raw. In earlier versions of the program, such as version 9.0/9.0.1, there was also the size factor as mentioned above. The results are good with all the above ifs in place.

  • Does Lightroom 3 support Panasonic DMC FZ200 RAW files?

    Does Lightroom 3 support Panasonic DMC FZ200 RAW files?  I think the update for LR 4.2 does.  But I still have LR 3 and do not wish to upgrade right now.

    Of course not.  The camera was announced 8 months after the last version of LR 3 came out.
    You could use the free DNG converter.

  • Poor Panasonic Lumix LX3 RAW color in LR2.5

    Hello,
    I just bought a Panasonic Lumix LX3.  I'm using Lightroom v2.5 to process the RAWs under Mac OS 10.6.2.  The color in the LX3 jpegs is very good/accurate, but when I open most RAWs it is taking me a lot of work to get accurate color, especially if there is any blue sky in them, as Lightroom seems to be rendering some colors incorrectly.  It's taking me way too much work to get my RAWs to look as good as the jpegs, which pretty much negates the RAW files' greater potential!  I have used Lightroom with my Canon 20D and never had this problem.  Also, with the LX3's supplied RAW software, SilkyPix, I don't have the RAW color issues.  I want to use Lightroom with my LX3's RAWs, but it is very frustrating.  Any thoughts or comments would be most helpful.
    Thanks,
    Greg

    I have also had the same color rendering problems with LX3 and LR 2.4-2.6. The JPEG and initial preview looks fine, but the LR raw rendering just doesn't look good.
    One solution I tried was to buy a Gretag Macbeth color checker (24 patch) and create a DNG profile for the LX3 using DNG Profile Editor from Adobe. This makes the color rednition significantly better, but the warm color spectrum is still a problem when it comes to high saturated areas.
    I still haven't found what I'm looking for...
    Any suggestions?
    Thanks,
    David

  • Aperture not reading lumix lx7 raw files

    I have installed updated Aperture from App store and it and IPhotos in my GMac5 arent recognising the RAW Panasonic Lumix LX-7 files: it keeps on importing them and then stating that this is an unsupported file type but on the Mac site it is stated that it supports this file and this camera.
    What might be going wrong?
    This is a new camera and I cannot load any files on to my computer.
    cheers
    Mark

    GMac5
    What is your MacOS X version, Mark? And what Aperture version have you upgraded to?
    The raw support for LUMIX DMC-LX7*** hast the following footnote:
    *** Requires Aperture 3.4 or later.
    Aperture 3.4 requires:
    OS X Lion 10.7.5
    OS X 10.8.2 or later
    And to install 10.7.5 you will need:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    Regards
    Léonie

  • Will there be an improvement of X-Trans RAW Files Developing in Lightroom?

    Hey, dear Ladies and Gentlemen of Adobe!
    I am very upset because of your lousy support of Fujifilm X-Trans RAW Files Developing in Lightroom. I spent a lot of money to buy Lightroom. Now this Software is not useable to me because it handles RAW Files of my Camera (Fujifilm X-T1) very unsatisfying.
    It is not just me, you can read it all over the Internet. The Fujifilm X-T1 is a state of the art camera and delivers very good Pictures, but why - in the name of god - is lightroom handling it so lousy?!?
    You are forcing me to look for another Software. I have tried a lot apps the last few days. And EVERYONE has a better result but Lightroom.
    Even the to be discontinued Aperture by Apple has a far better result of developing that raw files. A small one-man Company named "Iridient Developer" has the best result i have ever seen with all that apps! To name them:
    I tried Aperture, Iridient Developer, Photoninja, AccuRAW, Capture One, SilkyPix 5, and a lot more. All of them are making better, sharper, crispier Pictures than Lightroom 5.5. Yes, i have the latest Version.
    The Pictures are like painted in Watercolors. No Details, no fine Structures. I am heavily disappointed!
    I do not expect to get an answer with a satisfying solution. You already have my money. Why care about customers?!?

    fleckintosh wrote:
    Hey, dear Ladies and Gentlemen of Adobe!
    This is a user to user forum - you're not talking to Adobe. 

  • Olympus e-m5 mark ii raw file support missing in camera raw (pse 13)

    Olympus e-m5 mark ii raw file support in camera raw (pse 13).
    I cannot open an .orf file from the em-5 mark ii even after installing latest updates for pse13 / camera raw.
    Do I have to wait for support to be added by adobe / olympus, or can I do anything against myself.
    Thank you,
    Peter

    You do have to wait, yes.  The last updates to Adobe software came out in mid-December and the camera was not commercially available until some weeks or months after then.  There is software from Olympus, and perhaps a few others companies that will work, but nothing that will do Adobe rendering, yet.  You could use the Olympus software to create TIFs from your raw images and edit those in Photoshop Elements or just shoot RAW+JPG and edit the JPGs until there is an update from Adobe.
    I would expect the next update to Adobe software to have support and it's been about 3 months since the last update so one would normally be out about now; however, I think Adobe is actually going to release an entire new version of Lightroom and the camera-raw plug-in with matching functionality, perhaps synchronized with a new version of PS, and if so there are many more things to get working properly before an update can be released.  It's possible that updates were planned by this time, and there have been too many bugs to get ironed out and maybe Adobe would release at least a beta DNG Converter that understands the new cameras so people can do something while waiting for the main releases of the new software, but that is more my speculation than anything Adobe has said.
    Here is what Eric Chan, and Adobe Camera Raw Engineer, said recently, about the prospects of supporting your camera or any newly released camera:

  • Raw file support for HS50EXR in LR4

    When will raw file support for the new Fuji HS50EXR camera be added to Lightroom 4?
    I noticed the the other fuji cameras from the HS/EXR range are supprted but the new HS50EXR has not been added as yet...can i hope that raw file support for the new Fuji HS50EXR camera will be added real soon?...please!

    I suspect it might have been released a bit late for the next camera update version, it really depends on how soon Adobe get their hands on a camera.

  • I have accidentally deleted a large number of develped images in Lightroom before I did a backup. I reimported the original raw files back into Lightroom hoping the develop settings would be re-established but no luck. Notice system mau have done an auto-

    Question?
    I have accidentally deleted a large number of develped images in Lightroom before I did a backup. I reimported the original raw files back into Lightroom hoping the develop settings would be re-established but no luck. Notice system mau have done an auto-backup as have an lrcat-journal file. Can I use this to restore my develop settings. I also have jpgs generated from all the deleted images.

    Hello,
    if you have a backup of your catalog you can do the following:
    1. Backup your catalog first
    2. Restore your backup catalog to some location
    3. Open your current catalog and select "files->import from another catalog".
    4. Select your backup catalog and your lost images. LR ask you if you want to overwrite the current settings or save them as a virtual copy.
    As an alternativ you can open your backup catalog, select the "lost" images and save the development settings as xmp sidecar fiels (using ctrl-s). Then open your current catalog, seletct the images and use "Metadata->Read Metadata from files".

  • Can Olympus RAW files open in Lightroom mobile?

    Can Olympus RAW files open in Lightroom mobile?

    As I understand it, but I have not tried LR Mobile, you have to have the raw files on a real computer and then sync the smart previews from LR desktop to the iPad.  I am still trying to get my head around a real use case for a non professional enthuasist photographer.

  • Can you export a raw file photo with Lightroom adjustments attached?

    Can you export a raw file photo from Lightroom with Lightroom adjustments attached in some way?  If not what is the equivalent?  There are some individuals I would like to send the full data of the raw file, but with the non-destructive Lightroom adjustments layered on top.
    --Gerry 

    You can select "Original" as the file type, in Export. This saves out a copy of the imported source file into the selected location, labelling the current adjustments onto that image. When this is sent to somebody and imported to LR / opened in ACR, these metadata will be found and used automatically, with the exact same outcome as within your own LR Catalog - provided the LR / ACR versions are sufficiently compatible, and provided camera and lens profiles applied to the image, are present in both contexts.
    LR uses whatever method is normal when writing metadata, for each file type involved. So, if one imported file is a proprietary Raw file, LR will write an XMP file alongside. If another is capable of having metadata written into its file header, LR will do that instead.
    One important difference between doing this, vs writing LR metadata out to your original imported file, and sending that: the Export Original method will work in the same way, just as successfully, for one or more Virtual Copy versions (duplicating physically as needed), as it will for the primary Master version - relating to a given imported file.

Maybe you are looking for

  • IPod classic freezes when plugged in

    Whenever I plug my iPod into the computer, it freezes at the "Connected, Eject before disconnecting." screen. The actual iPod freezes and I have to reset it to use it again. Details: 1. My main computer is a PC with Windows XP. I've tried 2 different

  • What is this? iMac i7 reboots on its own.

    Can someone tell me if this is a memory issue? iMac i7 reboots on it own... Process: Finder [600] Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder Identifier: com.apple.finder Version: 10.6.3 (10.6.3) Build Info: Finder_FE-6650301~

  • Table Cell Editor (Urgent)

    I would like to know if it is possible to set different cell editor for each cells within the same column. I want to have Combo boxes with different items for several cells within the same column. Plz tell me how to do so if this is possible Thanks,

  • 2 editable combobox questions

    1. addKeyListener(..) not working onto editable combobox. 2. how to scroll the editable combobox when user types into it? (in case of solving 1st problem, this one is solved too). Maybe there are special methods?? Thank you very much. Boris.

  • IPhone SDK running on phone

    I can run an app in the simulator, but when I set the Target to the phone it gives me an error "Error: not device found". This despite the fact that the phone shows up in the Organizer window with a green light, so it obviously found the phone. Has a