Panasonic's AVCCAM Importer for QT7 & FCP7 - workin' for anybody?

This was just released today. Supposedly you can open AVCAM native footage (.m2ts) in QT7 and FCP7 after installing it. Followed install instructions but...
Doesn't work for me. Anybody had any luck using it?
From Panasonic PASS Support Team e-mail:
NEW UTILITY: AVCCAM Importer for Mac (Free download) is now available
The AVCCAM Importer plug-in component for QuickTime 7 is to enable
direct playing-back of AVCCAM clips without conversion.
(Compatible with Mac OS X 10.6 SnowLeopard only)
In Apple Final Cut Pro 7.0.3, direct import of AVCCAM clips and
realtime preview on a timeline is possible, without conversion.
And to view AVCCAM clips, you just simply need QuickTime player7,
do not need to start up Nonlinear editing system.
John
MacPro 3.0 GHz Dual-Quad 10.6.7
12 GB
FCP 7.0.3
QT Pro 7.6.6
ATI Radeon HD 5770
250.06 GB WDC WD2500AAJS-41RYA0
750.16 GB ST3750640AS P
750.16 GB ST3750640AS P
1.5 TB ST31500341AS
1.5 TB ST31500341AS
2 TB Hitachi HDS722020ALA330

John,
I can report that the importer seems to work as advertised on my Macbook pro 2.7 GHz, 8 GB RAM (FCP 7.0, QT10.0) even though the minspecs from the release notes (below) the required FCP is 7.03 or better.
It does not work on my imac 2.93 GHz 4GB RAM (FCP 7.03, QT 10.0)
I have been reading multiple release notes and have found a few interesting passages.
Note that my iMac is not listed on the release notes as a "Tested Mac computer," but your MacPro seems to be. Note this proviso as well: "Even if the system requirements mentioned in these operating instructions are fulfilled, some systems cannot be used."
Lastly they offer this too: "Operation is not guaranteed for software other than listed above. Operation of QuickTime 10.0 using this software is not guaranteed on Mac OS X 10.6."
I had been thinking of reverting to QT 7 from QT 10 - but now I just don't know. Maybes another forum participant will have some more information. Thanks for continuing the thread I sure would like to edit AVCCAM on my iMac.
Dan
Mac
* Mac computers with Intel processor(s)
* 2GB of RAM or more
* Mac OS X 10.6 (Snow Leopard)
* QuickTime 7
* Final Cut Pro 7.0.3 or better however Not compatible with Final Cut Pro X (Ten)
Tested Mac computers
* MacPro 2x2.93GHz 6-Core Intel Xeon 16GB-RAM
* MacPro 2x 2.93GHz Quad Core Xeon 12GB-RAM
* MacBookPro 2.93GHz Core 2 Duo 4GB-RAM
You need the following hardware and operation system software to use AVCCAM Importer.
Hardware:
Macintosh computer equipped with Intel® CoreTM 2 Duo or later processor 2 GB or larger RAM memory size
Software:
Mac OS X 10.6 QuickTime 7 FinalCutPro 7.0.3
Confirmed system environment:
For details please see the Panasonic website. <http://pro-av.panasonic.net/>
<Note>
z Image that is supported by this software is image in the AVCHD standard recorded on a video camera (Panasonic AVCCAM series). Operation is not guaranteed for images recorded on other video cameras or created by other software.
zEven if the system requirements mentioned in these operating instructions are fulfilled, some systems cannot be used.
zOperation is not guaranteed for software other than listed above. zOperation of QuickTime 10.0 using this software is not guaranteed on Mac OS X 10.6.

Similar Messages

  • AVCCAM Importer with FCPX and Panasonic HDC-TM900

    Has anyone tried the new AVCCAM Importer from Panasonic with Final Cut Pro X and a Panasonic HDC-TM900 with 1080p video?
    I have just started reading all of the posts on issues with TM900 and Final Cut Pro X with 1080p video and was hoping the new plugin from Panasonic may have helped!
    My concern is the download only references Final Cut Pro and Quicktime 7.
    https://eww.pass.panasonic.co.jp/pro-av/support/desk/e/avc_download.htm#avccamvm ac
    I have a 2011 MacBook Pro which has Quicktime 10 and was hoping to buy FCPX but won't if I can't import my video properly.
    I was even willing to go through a conversion process but in looking at all of the board posts, it seems that for the Panasonic TM900 with 1080p video, there are not any programs that will convert properly, i.e. one puts a green screen every second or there is video artifacts.
    If the new plugin "AVCCAM Importer" does not help with the TM900 / 1080p video in FCPX, what alternatives do I have to edit HD 1080p video on my Mac??
    Is there a conversion tool that has fixed the issues mentioned above or is there another video editor that will import the .mts files natively?
    I don't want to go back to my PC if I can help it and I don't plan on making a feature film, just editing home videos onto Blue-ray as I used to do on my PC with Pinnacle Studio.
    Appreciate the feedback!!

    [Minimum System Requirements]
    Mac
    * Mac computers with Intel processor(s)
    * 2GB of RAM or more
    * Mac OS X 10.6 (Snow Leopard)
    * QuickTime 7
    * Final Cut Pro 7.0.3 or better
    however Not compatible with Final Cut Pro X (Ten)
    Not Ten.

  • Excel Importer for Visual Studio LightSwitch 2013

    Has anyone managed to get the 'Excel Importer for Visual Studio LightSwitch' extension working with Visual Studio 2013?

    Hi Kevin,
    I assume you mean this extension here -
    http://code.msdn.microsoft.com/silverlight/Excel-Importer-for-Visual-61dd4a90
    From what I can tell that does not yet support VS 2013.  The source code is of course available, so you could attempt to fix it up yourself and tell us the result.
    Thanks.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • My iphone is broken,and i came to store to change a new one today. When I come home, I found I lost my backup and may be mistake is made during before backup.The information in my previous iphone is really important for me? how can I get the backup back?

    my iphone is broken,and i came to store to change a new one today. When I come home, I found I lost my backup and may be mistake is made during before backup.The information in my previous iphone is really important for me? how can I get the backup back?

    If you don't have a backup then the only possible solution is to go back to the store and see if they can get your old phone and create a backup of that. I know very often that Apple employees will wipe the returned iPhones clean before shipping them back to wherever they ship them.
    When you say your old phone was "broken" does this mean it is dead and won't turn on?
    Do you have a Time Machine backup of your computer, or a clone that might have this info on it?
    Other than that I hate to say you may be out of luck. Time Machine and/or a cloning program performed regularily will inevitably save your a** in situations like this.
    Good luck
    PM

  • CS5.5 Import for runtime sharing and preview problem

    Hello
    I'm having a strange issue with CS5.5 and the import for runtime sharing settings. Here's what I'm doing: I create two .fla's, Export.fla and Import.fla. In Export.fla, I create a shape, select it, press F8 and tick export for runtime sharing, to create a really simple exported movie clip. I click the exported symbol in the library, press Ctrl-C, switch to Import.fla and press Ctrl-V. Everything ok so far, the symbol is imported for runtime sharing.
    The first problem I have at this stage is that changes I do to the exported symbol in Export.fla are not reflected in Import.fla, only in the final .swf's I can see the changes. Also, unlike in CS4 and CS5 I cannot "Update" the imported symbol in the library right-click menu, to make changes to Export.fla visible in Import.fla. The menu entry is just greyed out...
    So I tried to use Authortime sharing, in the Symbol Properties for the imported symbol in Import.fla. I link the source to the symbol in Export.fla, and once I do that, everything is completely borked. The previously imported symbol is no longer imported. Whenever it is changed in Export.fla, it gets an "Export for Runtime Sharing" tick in its Properties in Import.fla, and worst, it is not shared at runtime, like I need it to.
    Can anyone tell me how to get the "normal" CS/4/5 behaviour in CS5.5: a runtime shared symbol, that can be updated in Import.fla (I dont care if manually or auotmatically) when I change it in Export.fla, and which also is runtime shared?
    Cheers
    Ulf

    Hi, JonnyDiamond
    Thank you for reporting the issue for runtime sharing settings affected by authortime sharing. It is fixed for parent symbols in Flash Pro CS6, but we just recognized it is not for nested items.
    As an alternative to deleting and re-copying the symbol, we see the following steps restore the original settings of the nested bitmap symbol (png in your case) for importing runtime shared library. After you open Bitmap Properties dialog of the bitmap symbol, go to ActionScript section and:
    1. Uncheck Export for ActionScript
    2. Check Import for runtime sharing
    3. Input the path to Library.swf in URL
    4. Click OK twice
    Please try these steps to see if they work for you. If they do, the simalr steps can be processed via JSFL script. It would be something like this:
    //// To restore the settings to import runtime shared library //////
    // Get Library items
    var myItems = fl.getDocumentDOM().library.items;
    // Store an item from myItems
    var myItem;
    // Path to runtime shared library. Change this to your path
    var pathToRSL = "Library.swf";
    // Go through Library
    for (var i = 0; i < myItems.length; i++)
              myItem = myItems[i];
      // Change the condition to suit to your Library
              if(myItem.itemType == "bitmap" &&
                 myItem.name.split(".").pop() == "png" &&
                 myItem.linkageExportForRS == true )
        switchRSSettings(pathToRSL);
    // Disable Export for runtime sharing and
    // enable Import for runtime sharing
    function switchRSSettings(path)
              myItem.linkageExportForRS = false;
              myItem.linkageExportInFirstFrame = false;
              myItem.linkageExportForAS = false;
              myItem.linkageImportForRS = true;
              myItem.linkageURL = path;
    ///////////////////////// End of Script ////////////////////
    We hope this would help you workaround the issue. Again, thank you for your report!
    Thanks
    Toshi

  • Import for Trading Material Pricing Procedure

    Hi Everybody.
    My client have a scenario that, they want to make import for a trading materials,(Pricing control is Standard Price) The customs duties like CVD, ECess & Addnl Duty will be Non Modvat. Since it is a Non modvat it will add to the Material cost in actual process. But for my client it should not add to the Material cost and Exchange rate in PO Header level it should not fixed while making PO and posting GR, since exchange diff. rate will add to another account because of STD price.
    Please let me know the solution for this scenrio if anybody experienced.
    regds,
    Dhanu

    Yes, that I understood,
    How to avoid Non Modvatable condition values to add Material Cost if it is Standard Price in Import.
    regds.

  • Data import for users of forms created with Livecycle Designer

    Hello,
    I have seen several posts regarding data import for forms created by Livecycle Designer but nothing that helps with something I am trying to accomplish.  I can create a data connection and import information in a form but what I would like to do is import data, then send the pdf for completion to a user.  There are a few data elements that I have available and the rest of the information comes from from the user.  The problem I run into is once I create a data connection, the pdf is ALWAYS looking for the source file for that data.  I simply want to prepopulate some fields and send to the various users for completion.  Any help would be greatly appreciated.
    Thanks!

    Which type of Data Connection are you trying to create?
    XML Schema, Sample Data File or WSDL?
    Creating any one of first two types(mentioned above) will only create schema and will never import any data into PDF.
    If you create the WSDL connection, you can surely import data (i.e. prepopulate data) into your PDF and forward it for users review/fill.
    If I misunderstood your question, please get me clarified.
    Nith

  • Import for Trading Materials New Scenario

    Hi Everybody.
    My client have a scenario that, they want to make import for a trading materials,(Pricing control is Standard Price) The customs duties like CVD, ECess & Addnl Duty will be Non Modvat. Since it is  a Non modvat it will add to the Material cost in actual process. But for my client it should not add to the Material cost and Exchange rate in PO Header level it should not fixed while making PO and posting GR, since exchange diff. rate will add to another account because of STD price.
    Please let me know the solution for this scenrio if anybody experienced.
    regds,
    Dhanu

    Hi,
    In case of Trading goods getting imported you cannot take the CENVAT credit. The custom duties CVD, Ecess, HCess will get loaded to the material cost. A trader can pass ADC (add duty of customs) to the buyer.
    Is this a real scenario or you are simulating a test case?
    You have not specified where your client want to post the amount of customs duties. is he going to take cenvat credit ?
    as per excise laws he cannot.
    if you want like this what you have mentioned, then proceed in the same way as you are doing for other imported material. like maintain J1ID maintenance, etc.
    to my best of understanding in Indian scenario no industry can do like this.
    Regards
    Rajesh

  • Running GL Journal Import for HR Budget

    I'm trying to run the GL journal import for HR Budget after having posted the budget to GL, but there are no values in the LOV for Ledger.
    I'm guessing that I might have to set my security profile for PSB:GL Budget Set, however when I try to do that it gives me the following error:
    APP-FND-01436: List of values cannot find any values for you to choose.
    Cause: The List of Values execution failed to find any values.
    Cause: The SQL statement specified to fdlfch() failed to return any values.
    Action: Check the message stack for any SQL statement failure messages. Check to make sure your SQL statement works in SQL*Plus. (Routine=fdlfch)
    Any idea what I am missing?

    I raised a SEV2 SR with product support and even they are out of thought on watz happening with the program.
    i checked all the setups in webadi template, gl profiles, setup(s) but could not find any thing as problematic.Do you have any custom code or the database triggers?
    By
    Vamsi

  • HT204053 i just brought new i phone 5 yesterday and now i can see all paid applications and i dont use or have credit card also now how i can buy applications which are important for me? can i buy them online? or use debit card

    i just brought new i phone 5 yesterday and now i can see all paid applications and i dont use or have credit card also now how i can buy applications which are important for me? can i buy them online? or use debit card and trust me all my friends are regretting buying phone because of this problem.Kindly help.Cant it can be deducted from our mobile charges?i would be much easier then

    You can buy apps using iTunes Gift cards without needing to register your debit card.
    http://store.apple.com/us/personalize/itunes

  • How to encode Panasonic HDC-TM700 footage for Final Cut Pro?

    How may I encode Panasonic HDC-TM700 footage for Final Cut Pro? It is 1080p/ 50 fps (in Europe)....

    I have not bought the camera yet so I cannot try. I have heard that the footage is not suppose to be supported that easily since it is 28 MBS "Avchd?" format. However people seem to be able to edit it in Imovie....

  • Schema Group for Local & Import for RFQ, Contract, PO

    Hi,
    I would like to create two schema for Local & Import for RFQ, Contact and PO.
    I have customized the schema as per my own requirement, it is working fine in PO RFQ but in Contract the same Schema is not appearing when i am trying to maintained header condition.
    In short i would like to have my own schema for Import & Local same for RFQ, Contract & PO.
    Regards

    Check this link:
    Assigning Calculation Schema to Contract
    servicing calculation schema and populating them while creating contract
    Check this answer:
    Go to M/06 and here in the Base Price Condition Type (for e.g. PB00) assign the Z - Pricing Procedure under "Master Data" Subscreen which you want to use. And then try to create a new Contract or change the old contract.
    Edited by: Afshad Irani on Jul 30, 2010 5:29 PM
    Edited by: Afshad Irani on Jul 30, 2010 5:30 PM

  • Source Data from OLE DB staging area to Import for FDM

    Hi ! Please help me out on Integartion of Oracle to FDM
    I want to load data into FDM directly fom Oracle database through an Integration Script.
    How to take Source Data from OLE DB staging area to Import for FDM?
    My main intension to import data for FDM from Oracle DB where there is no manual intervention and it could be safe. We are taking Actual data through Oracle Apps and keep that data into Oracle DB for further process.
    FDM can also import data from Oracle Data Base Source means I need procedure/script to import data from Oracle data base staging area where we keep some data for HFM to enter the data on monthly basis.
    OLEDB----->Import FDM-------> Export to HFM (Procedure\script without manual intervention)
    Here in OLEDB data comes cumulative from Day or week to Month basis for inputing to HFM applicaiton.(Actual)
    Regards and Thanks.
    Edited by: user3557428 on 10-Dec-2008 00:05

    You will want to look at the FDM Admin Guide
    Look for Integration Import Scripts
    There are a few pages that cover what you are trying to do. If you do not know VBScript it might be benefitial to tap someone who does or brush up on ADO.
    Hope this helps
    Wayne Van Sluys
    TopDown Consulting

  • HT1212 device disabled after entering wrong passcode. Please help me in getting this unlocked  without lossing the data as the data is really important for me

    device disabled after entering wrong passcode.
    Please help me in getting this unlocked  without lossing the data as the data is really important for me

    I think you should call via phone or perhaps take it to a phone store. I suggest taking your id, box packaging and other necessities such as the reciept of the phone being purchased.
    Hope this helped

  • HT204022 Dear sir/madam,  I had accidentally deleted all my images from my iPhone 4s do u send me any solution or my phone back up. please sir its very important for me i have just one hope from you.  Thank you  

    I had accidentally deleted all my images from my iPhone 4s do u send me any solution or my phone back up. please sir its very important for me i have just one hope from you.
    Thank you  

    Use the backup you make to iCloud or a computer.
    iTunes: About iOS backups - http://support.apple.com/kb/HT4946

Maybe you are looking for