Panasonic sdt750 breaking signal . Fix from camera or FCP express?

Hi. I got the Panasonic sdt750 and since I don't know this camera very well I went to a party and every time that a photographic camera took a picture, the video breaks for 3 or 4 frames. How can I fix this? From the camera? With FCP express? I noticed that the other Canon I have don't break signal in front of flashes..Thanks..

It's an artifact of CMOS sensors called Rolling Shutter.
The Canon probaly uses CCD sensors.
See here for some details:
http://en.wikipedia.org/wiki/Rolling_shutter
The newer FCP X program has tools for correcting/(making less worse) the issue.
You can download a free trail version if you wish to explore the feature.
Al

Similar Messages

How could i get footage from camera to FCP with no firewire

I have a Imac late 2009 21.5 with a broken fire wire. How can i get footage from Canon XM 1(tape only) to FCP I have a PC that has firewire that works have loaded footage to Movie Maker and put it on a USB flash Drive put that into mac but cant convert it with MPEG clip stream as planed. Any thoughts? I thought second hand mac mini may do the job. Repair firewire £653.14

Without firewire, you cannot capture from that camera in FCP. It only works via firewire. So you need another computer or fix that firewire.
Your other method...seems ugly. Ads layers of compression that might make it look ugly.
Borrow a friends machine with FCP if you can.

Please Help! getting miniDV video from camera to FCP

Hello everyone,
I am new here and would greatly appreaciate any advice or help anyone can offer.
So I have Final Cut Pro v.6 and a brand new Mac Book. I am wanting to make "How to" videos for work with my sony miniDV camera and edit the footage in Final Cut Pro.
Does anyone know the correct hook up for transfering the miniDV video from the camera and into FCP?
Obviously I am an amateur beginner and if anyone could help out with the answer or maybe know some other place I can research for the answer?
Thank you!!!!!!!!!!

Hi Tony and welcome here,
Your camera may be connected to you MB through Firewire (4 to 6 pins).
Once that's done open FCP and use the very good manual coming with it.
Main menu>help.
Then type in the search are *Easy Setup*. Here you will learn a quick way to setup your project.
Good luck,
G.

Video file size triples when transferred from camera into FCP

I recorded about 16gb of video in avchd on a canon hf10. When I import it into fcp6 using pro ress 422, the file sizes are enormous, about 100 gb from the original 16. How did this happen and how do I shrink my finished project it back down to fit on a dvd. I used compressor and Mpeg2 and got it down to 3.7gb but the quality was horrendous. I used compressor and h.264 and it took 24 hours then crashed before finishing.
using a canon vixia hf10, and FCP 6.
Thanks!

AVCHD is not a convenient format for editing so FCP converts it to ProRes which as you have discovered is around 50GB for an hour of footage.
ProRes enables it to be edited more easily and with better quality.
The size in gigabytes of your project is completely irrelevant . . . . it could be a terabyte with no problems.
All that matters is the length (time) of the project . . . . as long as it is no more than a couple of hours or so you will have no problems fitting it onto a DVD as iDVD or DVD Studio Pro etc. will compress it all down to around 4GB to fit.

Weak signal reception from my new Airport Express card.

I had an Airport Express card installed in my spanking new G5 dual-core at the Apple store. I have a feeling it was installed incorrectly.
My Dell laptop (next to my Mac) picks up my Airport Express transmission just fine and shows the signal as very strong. My mac, however, shows a weak signal that will often fade away to nothing every hour or so. I've found that if I shake the tower, the signal will come back. I've moved the tower about the room, but with the same results.
I opened up the tower and the card appears to be installed correctly. I see the two antennae wires hooked up and and the card is in place.
Has anyone else had this type of problem?

ratsurfer, Welcome to the discussion area!I had an Airport Express card installed...You mean AirPort Extreme card. The AirPort Express is a router.
Do you have the external antenna connected to the back of the Power Mac G5? Read PowerMac G5 wireless problem? Check this... and check the included links.

Problems importing .mts files from camera in FCP 10.1.

I am having trouble importing with FCP 10.1. Can anyone advise me on importing .mts files after the upgrade? FCPX used to do it automatically when I attached camera!

What kind of trouble? What appears in the import wimdow when you connect your camera?
Rus

Is there a way to use import from camera with a cannon 7d CF card so that you can select only the parts of the clips that you want?

I used to use log and transfer and now in final cut x I know you are supposed to use import file, however you have to import the entire clip instead of being able to select an in and an out point of the footage being imported. This is not good for me because I have a limited amount of space and if I'm going to be converting everything to prores and only using 65% of the footage that is a huge waste. Any help or work arounds would be appreciated. Thanks!

I import from P2 and 7D cards daily, it's super easy, very fast, very simple, not so complicated.
Here's how you do it.
1- CF card in a card reader, mount on Desktop, or copy whole card contents to a folder. (P2 can read directly from inside cam)
2- Open "Import From Camera" in FCP X.
3- Click "Open Archive" button.
4- Point to CF card.
* FCP X will act like L&T now.
* Select a Range of a clip you want to import, click import button.
* Select a different Range of same clip, click import button.
* If you want whole clips, highlight one or more whole clips, import.
* Imports are ProRes 422 files.
* If you want a backup of the CF or P2 card "as is", click the Create Archive button.
Very simple, no need for thrid party BS. It's really simple and easy.
Canon DSLR's have never been able to mount the cards while inside the camera. You have always needed a card reader.

LR displays "no preview available" upon import direct from camera after last update. How do I fix this?

I have the latest LR update with Nikon D700 and import directly from camera. I purchased a new CF card in case the old one was the problem but I get the same thing with the new card. Is there a bug in the last update or is this a problem with my equipment?

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

When photo stream is supposed to be fixed?my photos is not going to photo stream from camera roll, so when this problem will be fixed by apple?

when photo stream is supposed to be fixed?my photos is not going to photo stream from camera roll, so when this problem will be fixed by apple?

There is nothing wrong with Photostream. The "problem" is likely in the way you are using it.
In order for photos to be moved into Photostream, two things must happen. (1) you have to be connected to Wifi, and (2) you have to exit the Camera app. Unless both of those things happen, the photos will not be transferred to Photostream.
So, shut down your camera app, and connect to Wifi. Wait a while, and the photos you took with your iPhone should be transferred.

I am unable to import pictures from camera to iphoto 9 or 11 without getting message saying "the file is an unrecognizable format" They are JPG files like always but now i can only import from a CD. What is the fix to this problem?

I have always been able to import pictures from camera to iphoto without a problem. Now, for some unknown reason our iMac and Mac Laptop will not import pictures from camera to iphoto 9 or 11...what is the fix to this problem? It will only accept import from a CD.

I have always been able to import pictures from camera to iphoto without a problem. Now, for some unknown reason our iMac and Mac Laptop will not import pictures from camera to iphoto 9 or 11...what is the fix to this problem? It will only accept import from a CD.

FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ? Any solution * Advance Thanks

FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ?
Any solution * Advance Thanks

FCP X will import into separate clips every time it detects a scene change (as when you stopped and started recording in the camera). There is no option to avoid this, as far as I known.
You may try importing from camera using Quicktime Player X and then bringing the imported file into FCP X.

Import from Camera Screen - cut off

Folks,
I am trying tom import from my Sony DCR-DVD201 camcorder. I can import fine, but the "Import from Camera screen" is cutoff and black for the first 3/4 of the screen -- I can see only the very bottom edges of the video clips.
I can still import, but is there a fix/setting for this issue?

i have this bug too. resizing the window, and then hitting play will show the whole window. i have a Panasonic HDC-SD7. it works, but a very annoying.

The 'Reimport from Camera / Archive' button does not appear in my file menu.

My last attempt to import material from my camera was interupted so not all the footage was imported to iMovie. I have re-attached the camera to try and reimport and the message on iMovie says that I should select the 'Reimport from Camera / Archie' option from the File Menu. Unfortunately, there is no such option in my file menu. I am using the latest version of iMovie 10.0 and my camera is a Panasonic HX-DC3. Help?

i wasn't even interupted, it told me it had imported everything from my gopro then i aimlessly went onto edit. ejected the gopro, went down stairs. came up to continue only to find half of the vids missing from the project screen. telling me the file was missing as it was still on the camera. so i went to import again. it told me done. no not done still on camera only. then when i go to consolidate event files it tells me they are already there. no not there. i went to share finish project (after pluging gopro back in and finishing project with half the vids in the libary and the other half stillon the camera) it lets me share to the new iMovie theater but when i go to youTube it it tells me it cant as half of the files are still on the camera.
i hover over the camera icon on the video file in the project screen where it pops up a info window telling to reimport from camera/archive......... from the file/menu...
hm hmmmm
nowhere to be found.
think you forgot a few things apple.........
fix it up

IMovie'08 (7.1) Crashes during Import from Camera

Well, it is hard to say simpler then the subject line of this posting... iMovie'08 (7.1) Crashes during Import from Camera (PANASONIC PV-GS500). I use 24GHz MacBook Pro with 4Gig of RAM. Importing to OWC 500Gig RAID drive, as well as to the internal 200Gig 7200 RPM drive. So it certainly looks like not because of hardware. I tried to remove DIVX and Pearl plugins from QT folder in Library as it was suggested in previous postings to no success. It seems like I am not the only one with this problem here. If iMovie cannot import from camera then what is it good for? By the way, the previous version of iMovie works fine importing etc. Did I just wasted $79.00? Anybody knows the solution? I hope somebody can help.

FOUND FIX
I found this fix in another thread post. iMovie 7 appears to be bugged, but you can import movies if you download iMovie6 HD. It's apparently free from apple for iLife 08 users.
Here's the link so you can download it.
http://supportdownload.apple.com/download.info.apple.com/AppleSupport_Area/Apple_Software_Updates/Mac_OSX/downloads/061-3532.20070807.nq3ER/iMovieHD6.dmg
Hours spent trying all sorts and iMovie HD ... just seems to work. Someone suggested that I use an external HD to improve performance. Just make sure you don't use Fat32 because it bombs when the file size gets to 2GB lol. It's a limitation of the Fat32 format. Since you can't access NTFS directly, you're a bit stuffed if you want to use the external HD with you Mac and PC. Either format it for your mac or your pc.
Message was edited by: PJ Cook

Using Photoshop CC I cannot save images to folder from Camera Raw as Tif. I get message 'write permission error'. I am using Widows 7 Professional.

I have just changed to Photoshop CC from CS4 and cannot now save images from Camera Raw. I get message 'write permission error'. I assume there is some permissions setting which did not exist with CS4.
I cannot progress unless I revert to CS4. What am I failing to do?

See if the suggestions, here, help, although this was back with CS6-cloud, not CC, so may not apply 100%:
http://forums.adobe.com/message/4758115
I'd suggest that rather than deleting the file, you move it out of the folder to somewhere else, in case things get worse and you need to put it back.
I found this by Googling the error message.
If you can't figure it out, you might post in the "Downloading, Installing and Set Up" or "Adobe Creative Cloud" forums since it seems to be related to the Cloud updates, and not necessarily ACR plug-in functionality, and I've seen India support people actually tackle problems posted there, which rarely happens in the ACR forum, although an ACR engineer may sometimes pop in to answer questions, they'd be less likely to know how to fix deployment issues.

Panasonic sdt750 breaking signal . Fix from camera or FCP express?

Similar Messages

Maybe you are looking for