Panasonic TV tx-L32ET5EW

Dear All,
I bought a new panasonic TV TX-L32ET5EW. There is skype provided with it. I would like to connect an external camera to it. Which camera is supported on this TV?. Do I have to contact panasonic to get this answer or Skype team can provide it?.
Thks in advance for your support
JJC

Its looking for the wireless encryption key which is written on the removable tab at the top of the home hub 3. Its the wireless key not the admin password that you need.
You may be dissapointed if you use a wireless connection, broadband extenders would be a better option.
http://www.shop.bt.com/learnmore/bt-branded-products-and-services/bt-broadband-extenders/
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • Unable to capture from the Panasonic AJ-HD1400 deck into Final Cut

    I am working on a project where I need to use the Panasonic AJ-HD1400 deck and import 720p footage from the Vericam into final cut. I am able to connect to the deck via firewire but when I playback footage or try to capture I get a black screen and error message saying that FCP isn't getting a video signal.
    I have tried multiple capture and sequence settings, none of which have worked. The one I have read that I am suppose to use is the easy set up for DVCPRO HD 720p24.
    The footage is shot from the Panasonic Vericam which shoots at 60 fps. The footage has been flagged both 24p and 60p during different takes. - Which I have read you are suppose to convert using the DVC PRO HD Frame Rate Converter after it has been imported.
    Anyone out there know how to solve this issue,
    -Steller

    Have you tried trashing your prefs?

  • Re: Can you import 1080 60P material in Elements 11, as an example from a Panasonic HDC-TM900 camcorder?

    It is not about a slow computer (míne is new and fast) or an apple computer (I use windows 8) but it's about video quality and editing usability. Down under are the specifications of my camera, you can see the panasonic has different options and the MOV 50p had better quality (because of the higher bitrate), it is easier to use then the highly compressed AVCHD with video editing and I can use it also on a MAC (if I would like to). That is because I use MOV (and professionals like it too). So I need a MOV 50P setting and nog the AVCHD setting (I already installed the AVCHD setting as described above). It is true the panasocic is new and it is not very common in the consumer market to use MOV (most camcorders use AVCHD indead) and most DSLR don't have the 50p resolution yet it is still rare these days.
    I hope there is anybody with a solution (I wish someone good give me a MOV 50p setting for PE11 and I'm happy!)
    these are the video specifications of the Panasonic GH3
    MOV (H.264) resolution, frame and bit rates
    • 1920x1080 (60p/50p): 50Mbps
    • 1920x1080 (30p/25p): 50Mbps (IPB), 72Mbps (All-I)
    • 1920x1080 (24p): 50Mbps (IPB), 72Mbps (All-I)
    • 1280x720 (60p/50p): 50Mbps (IPB), 72Mbps (All-I)
    • 640x480 (24p): 10Mbps
    MP4 (H.264) resolution, frame and bit rates
    • 1920x1080 (24p): 50Mbps
    • 1920x1080 (30p/25p): 20Mbps
    • 1280x720 (30p/25p): 10Mbps
    • 640x480 (30p/25p): 4Mbps
    AVCHD resolution, frame and bit rates
    • 1920x1080 (60p/50p): 28Mbps
    • 1920x1080 (60i/50i): 24/17/13Mbps
    • 1920x1080 (24p): 24/17Mbps
    • 1280x720 (60p/50p): 17/13Mbps
    Audio
    44.1kHz Mono (Internal Mic), Linear PCM
    File Formats
    MOV, MP4, AVCHD
    I will continue at a new discussions (because originally it's about panasonic 60p and that is indeed AVCHD like most camcorders and that solutions works):
    http://forums.adobe.com/thread/1169776

    One of the beauties of Non Linear Editors is that at final output rendering, it goes to the source.  It is not rendered twice.
    The single most confusing subject I've run into trying to learn editing is how this works.  Here is what I think happens.
    First, you have to have a project setting that accepts your source files so that you can work in real time preview with smoothness.  The computer is doing "real time project rendering" for preview.  So, if Ann's suggestion works during the editing process, you're fine.  In other words, you may not NEED an exact match between your source footage and your project preset.  Let PrE pick the best it can when you slide the first clip to the timeline.
    Second, when it is time to make your final product(s), you set the "output render" or "transcode" setting in the Share+Publish area.  You might need something optimized for YouTube, an iPhone or Hollywood.  The editing software then looks at what you have been doing in real time, goes to all the markers and transitions you have set and makes an entirely new file, the "video", by reading from your 50Mbps source files. 
    Somewhere here there is a long post from an Adobe tech who tried to explain it to me.  He emphasized that there was some relationship between the project setting and the output files, but the most important part was the output settings.
    In the Share+Publish section there are a lot of presets.  For some you can change the frame rate and bit rate.  You should find something pretty close.
    Your GH3 is so new, I've read little about it.  A 50 Mbps rate is twice what we've had at the consumer level for the last few years.  Have fun with that camera!
    Bill

  • Can I connect my MacBook Air wirelessly to my Panasonic Viera HDTV

    I would like to connect my MacBook Air to my Panasonic Viera HDTV wirelessly, so that we can view family photos, videos etc on the large flat screen. Is it possible and, if so, how do I go about it?

    I believe you would need an Apple TV:
    https://www.apple.com/appletv/
    FWIW, you are not running iOS (any version) on a Mac computer, it would be Mac OS 10.x.x (which is helpful for anyone trying to help you).

  • Importing to LR3.3 from Panasonic DMC-ZS3

    Sorry if this has been addressed. I couldn't find anything about it.
    Windows 7 Pro, 64bit, LR3.3, 2-SanDisk 2gb cards, RAW USB 2.0 UDMA reader
    Ever  since upgrading to LR3.3 I have not been able to Import files (jpg)  from my wifes SD cards straight to LR. Her camera is a Panasonic  DMC-ZS3. Prior to LR 3.3, ie; 3.0 it worked fine. I can copy via  explorer to the hard drive then Import them to LR 3.3 without a problem.  OK, there is a problem. I use LR's automatic folder destination creator  by date taken, on import. It takes too much time to create all these  folders using explorer.
    The Import report says the files  were not imported because they could not be read but reads them fine  from my hard drive. It reads and imports the files from my Nikon (CF  card) fine also.
    Any ideas why LR 3.3 does not like these files anymore.
    Jim

    Jim,
    Bad card readers and/or USB connections (cables, ports, hubs) are known to cause issues like yours. Somehow, LR seems to be more affected by these problems than the O/S tools.
    jga154 wrote:
    I can copy via  explorer to the hard drive then Import them to LR 3.3 without a problem.  OK, there is a problem. I use LR's automatic folder destination creator  by date taken, on import. It takes too much time to create all these  folders using explorer.
    You could copy the files into ONE temporary folder via Explorer, and still use Copy/Move and LR's automatic folder creation by date.
    Beat Gossweiler
    Switzerland

  • Trouble importing photos from Panasonic camera

    I'm getting error messages when attempting to transfer photos from my Panasonic camera to my Mac. Details:
    * Running Lion 10.7.4 on MacBook Pro
    * iPhoto '09 version 8.1.2
    * Brand new Panasonic DMC-ZS20
    * SanDisk 4 GB SDHC card, which I formatted using the camera function when I first installed it
    This was my first weekend with the camera and I went out and shot 300+ photos. Used the USB cable that came with the camera to hook it up to my MBP. On the camera screen I selected the "PC" option. Camera disk appeared on my desktop and iPhoto loaded. iPhoto recognized the camera and displayed all the photos correctly. The problems happened when I tried to import them. I selected "Import All" and the first few 4 or 5 imported OK, and then it just hung there (little spinning circle and one photo file name displayed). Finally after a few minutes, I got the error message "The disk was not ejected properly" even though I hadn't touched the camera or cable. Photos that managed to import were fine - no corruption. Steps I took to trouble-shoot:
    * Tried reconnecting to iPhoto and this time importing them one at a time. This worked for a few and then again, it go hung up. Thinking there might be an issue with one particular photo being corrupted, I tried different photos from different parts of the disk. There seemed to be no pattern to the issues. A photo would hang one time, but then import fine the second.
    * Thinking it might be an iPhoto issue, I quit iPhoto and just tried to drag photos from the camera disk directly to a folder on my hard drive. I was able to open the camera disk and locate the photos (file names were like P1000150.JPG). But the same things happened when I tried to copy them to my hard drive -- a few would copy and then it would get hung up. I got system error messages -36 and -43.
    * I tried restarting my computer and restarting my camera. 
    * At one point my camera got so "confused" that it wouldn't turn off, or even recognize that I had unplugged it. I finally had to take the battery out to reset it.
    * Thinking it might be an issue with a faulty SD card, I loaded the card into my printer's card reader and was able to transfer all photos without any problems. Photos look great.
    * In a possibly related issue, I tried to load the GPS data from the CD that came with the camera to my SD card, but it the GPS data would not load. Even though the card was empty (this was the day I got the camera, before I took photos) it kept telling me it needed 1.6 GB of space and I only had like 45 MB available… I'm typing these numbers from memory, not sure they are exactly right, but the point is that I had an empty 4 GB card and there should have been plenty of room.
    So, is there anything else I can try here? Has anyone else had problems with Panasonics and Macs? Could it be an SD card issue, even though it worked fine in the other card reader? Or do I have a defective camera and need to send it back?
    Thanks,
    Jill

    I finally figured out the source of my problem. I (foolishly) was connecting the camera to my computer through a USB hub. Turns out the hub was the problem. When I connected the camera directly to my computer, it worked just fine. Just figured I would post in case anyone else has the same issue.

  • How to edit JVC/Panasonic/Canon .mod video in Windows Movie Maker then upload to YouTube for sharing

    Quick View:
    Part 1: How to import .mod video to Windows Movie Maker
    Part 2: How to edit the video with Windows Movie Maker
    Part 3: How to upload your video to YouTube
    Know More:
    1. Which Camcorders record video in .MOD type?
    2. What file types are supported by Windows Movie Maker?
    3. What file types are supported by YouTube? 
    Part 1: How to import .mod video to Windows Movie Maker
    Step 1: Load files
    First copy the MOD file from your video camera to your hard drive, then download, install and run MOD Converter, click the "Add Files" button to browse your computer hard disc and load the MOD/TOD video files you want to convert to the program. 
    Step 2: Output Setting
    In the bottom of the main interface, select an output format supported by Windows Movie Maker for each video file and specify a directory on your computer to save the output files. 
    Step 3: Start convert
    Click "Start" button on right bottom of the main interface, you are allowed to start conversion. 
    Step 4: Import converted video to Windows Movie Maker
    Click on "File". Then click on "Import". A window will appear. In the window, navigate to the video clip you converted just now. Then double click on the file. You'll see the icon for the file in your Windows Movie Maker "Collections". 
    Part 2: How to edit the video with Windows Movie Maker
    Step 1: Add transitions and special effects
    In the Movie Tasks pane, under Edit Movie, click View video transitions. 
     Preview transitions by double-clicking them and watching the Preview Monitor. Once you've found a transition you like, drag it from the Video Transitions pane, under Edit Movie pane to the box between two of your clips. This inserts the transition between the two clips. 
    Step 2: Add titles and credits
    If you want to add a title before, after, or on top of a clip, click the clip on the storyboard or timeline.
    In the Movie Tasks pane, under Edit Movie, click Make titles or credits. 
    Step 3: Add Music
    In the Movie Tasks pane in Movie Maker, under Capture Video, click Import audio or music. 
     In the Import File dialog box, click the name of the song you want to use in the background. Then click Import. This adds your song to your collection but does not add it to your video. Drag the song from the collection to the video clip where you want the music to start playing. 
    Step 4: Add narration
    If you have a desktop computer, connect a microphone. Microphones are available from most electronics stores. If you have a portable computer, you can use the built-in microphone. However, you will get a better-quality recording if you connect an external microphone. In Movie Maker, click the Tools menu, and then click Narrate Timeline. On the timeline, click the clip you want to narrate. You can narrate clips one at a time, or you can narrate the entire movie all at once. If you narrate individual clips, you can rearrange them later and keep your narration synchronized. If the narration is too loud or too soft in comparison to the movie, right-click the narration on your timeline, and then click Volume. 
    Step 5: To save your movie to your computer
    In the Movie Tasks pane, under Finish Movie, click Save to my computer. 
     The Save Movie Wizard appears. On the Save Movie File page, type a name for your movie. You can also choose a folder to save it in by clicking the Browse button, but My Videos (the default) is usually the best place to save your movie. Then click Next. On the Movie Setting page, click Next to accept the default setting of Best quality for playback on my computer.
    Movie Maker saves your movie, which might take several minutes. On the Completing the Save Movie Wizard page, click Finish. If Play movie when I click Finish was selected (it is selected by default), the movie will automatically play in Windows Media Player. Now you can watch your videos anytime by opening your My Videos folder and double-clicking your movie. 
    Part 3: How to upload my video to YouTube
    A video file should meet the following requirements so that it can be uploaded to YouTube site.
    1. In an acceptable format: WMV, MPEG4, MOV, AVI and MPEG.
    2. Video length is shorter 10 minutes.
    3. File size is smaller than 1GB. 
    Step 1: Sign up a YouTube account or Gmail account, then click the Upload button on any YouTube web page. See the figure below: 
    Step 2: Type in the information of your video file, including Title, Description, Category and tags. To increase the chances that your video can be easily found, you should put as much information as possible. 
    Step 3: Set this video to be public or private. 
    Step 4: Click the "Upload a video" button. When you see the next window, click the "Browse" button to select the video file you want to upload. Then click the "Upload Video" button to upload it. After the upload is finished, you will see the completion page. See the figure below: 
    Step 5: Click "My Videos" and you will see the video. 
    Know More:
    1. Which Camcorders record video in .MOD type?
    MOD is the video file type used on many digital camcorders, such as the JVC Everio, the Canon FS100 and the Panasonic D-Snap SD-card camcorders. Accompanying the MOD video file, there exists MOI file that stands for the index file for MOD. 
    2. What file types are supported by Windows Movie Maker?
    You can import files with the following file name extensions into Windows Movie Maker to use in your project:
    Video files: .avi, .wmv, .mpeg, .mpg., .asf, m1v, .mp2, .mp2v, .mpe, , .mpv2, and .wm.
    Audio files: .mp3, .wav, wma, .mp2, .aiff, .aif, .aifc,.asf, .au,.mpa, and .snd.
    Picture files:.jpeg, .jpg, .jpe, .png, .bmp, .dib, .emf, .gif, .jfif,.tif, .tiff, and .wmf 
    3. What file types are supported by YouTube?
    YouTube accepts a wide range of video file formats.The video files below are all accepted by YouTube. Some video formats work best and are most compatible with certain computers, software or devices. Windows Media Video (.WMV)
    .3GP (cell phones)
    .AVI (windows)
    .MOV (mac)
    .MP4 (ipod/psp)
    .MPEG
    .FLV (adobe flash)
    .SWF (shockwave flash)v
    .MKV (h.264) If you do not think your current video file format is recognized by YouTube, you may get the best uploading results from converting your file to MPEG4 video with MP3 audio.

    I prefer this
    iPad Manager software, with the assistance of iPad Manager, you can make iPhone ringtone, connect your PC to iPad to backup iPad files to Computer directly, import computer file or folder to iPad. 
    Furthermore, it's easy to convert DVD/video to iPad. 
    This versatile iPad Manager can help you transfer videos, songs, photos from computer to iPad and from iPad to PC in fastest speed. Have a try with this tool and manage your iPad, iPod, iPhone in a much easier way. 
    * Convert DVD/video to iPad
    * Backup iPad files to PC
    * Import computer file or folder to iPad 
    iPod Manager
    iPod Video Converter
    DVD to iPhone Converter
    iPod Mate

  • Bad Picture Quality On SD Channels With HDMI And Panasonic VIERA 720p LCD HDTV

    I just bought a new Panasonic VIERA 32" 16:9 8ms 720p LCD HDTV TC-L32X1 for my in-laws when they finally had Verizon FIOS brought into their neighborhood last month.
    Install was by the Verizon tech using the HDMI cable I also had shipped to them.
    The HD channels quality is excellent, but the SD quality is smeared -- almost looks like an impressionist painting.
    It is not the TV -- the TV menus are crystal clear, as are the HD channels.
    And, it is not just the broadcast HD -- the DVR box menus are also smeared when viewing as SD channel, as is the guide and the pop up channel info.
    We've tried all the settings on the TV -- Zoom, 4:3, etc.
    The other TV (an older CRT) actually has better SD quality than the Panasonic.
    My research indicates we're not the only ones on FIOS with this problem. Someone suggested using the component hookup rather than HDMI?
    Other say that IMG 1.7 is supposed to solve the problem, that the SD quality was fine before IMG 1.6.
    Any suggestions, solutions, or updates?
    The picture is virtually unwatchable.
    Thank you!

    Here's a particularly relevant post if you don't want to wade through all the above links:
    (http://forums.verizon.com/t5/FiOS-TV-Technical-Assistance/bad-pq-on-std-def-channels/m-p/10917#M5540) -- second to last.
    "Re: bad pq on std.def. channels
    01-06-2009 03:55 PM
    Joe01880 - Being a new customer as of last October, I have never seen anything other than IMG 1.6.  My understanding from other posts is that before IMG 1.6, the SD PQ on an HD box was just fine.  I'm not sure what the complaints/gripes/begs were for IMG 1.6 but it seems to me that, if Verizon knows what changes were made, it should be straightforward to determine which changes caused a deterioration of the PQ.  I think it's been at least 6 months since the first complaints of poor PQ, so I don't really see how anyone can claim that Verizon is in danger of "rushing" an update to address this problem.  I also don't think that a forum topic, no matter how much it complains or gripes, will cause Verizon to rush.  I am much more worried that during a large portion of my 2 year contract that the issue won't be addressed at all, so I'm happy to add my voice to those complaining."

  • How to Connect My Apple TV to My Panasonic SC-PT760 Home Theater

    Hello;
    I currently use the Panasonic SC-PT760 as the Home Theater DVD Player which only has 1 HMDI output and connects directly to the HD TV, also I have the Direct TV connected to the Home Theather via AUX.
    I am wondering how should I connect my apple TV, if I would like to connect ut via HMDI. Is a HMDI switch an option or what should I do ?
    Please advise.

    You can purchase HDMI switches but don't expect them to work perfectly in _every_ configuration. What I mean is that your mileage may vary, it may work, or it may not. However, chances are good that it will but I'd make certain that you can return the HDMI switch if it doesn't work correctly when paired with you DVD player and the Apple TV and your HDTV.
    By the way, does your TV have component inputs? If so you can use the Apple TV's component outputs to get HD but then you'll have to route the audio from the Apple TV either over standard RCA stereo plugs or via the digital audio optical connection on the Apple TV (assuming again that your HDTV has optical audio inputs, but I see that you receiver has an optical input so that should work too).

  • I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

    I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

    DVI interface does't allow audio. Is there optical IN from your Panasonic TV? By then you can connect your ATV to Panasonic using optical together. It will work.

  • How to connect a apple tv to a panasonic sa-pt860 home theater sound system?

    how do i connect my apple tv to a panasonic sa-pt860 home theater sound system? Having no luck, what leads do I need please?

    Welcome to the Apple Community.
    Does it have HDMI inputs and outputs.

  • How to connect macbook pro to panasonic tv with hdmi cable

    How to connect macbook pro to panasonic hd tv with hdmi cable

    Hi m,
    It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
    This is if your MBP is from April 2010 or newer:
    http://support.apple.com/kb/HT4241
    First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
    Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
    If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

  • Which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

    which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

    I totally understand.
    Check some things from here, I have 2 and they have been great so far.
    Check here, lots of storage and reasonable prices. Also great support, you get to speak to a person
    Clean off your on the G5 drive and off you go.
    I suggest buying a second drive and setting it up for a back up, Time Machine or Carbon Copy Cloner, or SuperDuper (both "bootable" back up) All searchable on the web.
    http://eshop.macsales.com/search/elite+pro
    You can talk to a person for REAL advice, Phone: 800.275.4576  Ask about exporting to your G5 and and exporting to your existing OSX, you may only need a small inexpensive drive for this.
    Quick delivery and willing to help.
    Hope this makes you back up and running :-)
    Do get a back up drive, as it is not ""whether my drive will fail, as much as "when my drive fails"
    All the best

  • I just bought a panasonic  50" plasma tv model TC-P50X3 and i want to connect my macbook pro with my new ty how do i do that?

    i just bought a panasonic  50" plasma tv model TC-P50X3 and i want to connect my macbook pro with my new ty how do i do that?

    Assuming your MBP is a recent model, i.e. bought in the last couple of years, and that your TV has HDMI inputs (if you've bought it new then that's a safe assumption) then you need a mini-displayport to HDMI cable.  The Apple Store sell one:
    http://store.apple.com/uk/product/H7128ZM/A/mini-displayport-to-hdmi-cable-2m?fn ode=MTY1NDA3Ng&s=topSellers

  • How to connect MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50

    Any experience with cables for connecting MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50 (or similar)?

    It depend upon the model (age) of you MBP.  If you have a Thunderbolt or minidisplay port, then you will need a minidisplay/HDMI adapter.
    eshop.macsales.com/item/NewerTech/CBLMDPHDMI/
    Or you can get an all in one:
    http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADYD O/ref=sr_1_3?s=electronics&ie=UTF8&qid=1361985588&sr=1-3&keywords=minidisplay+hd mi
    If you have an older mac with a DVI port, you will need something like this:
    http://www.amazon.com/DVI-HDMI-Cable-6ft-Male-Male/dp/B0002CZHN6
    Note that audio is supported via HDMI for MBPs 2010 and later.  Earlier ones require tapping the audio output port.
    Ciao.

Maybe you are looking for