Panel behavior in Loupe view seperate from Grid view

When I am in grid view I like to have the left navigation panel open. However when I am in Loupe view I like to have all panels closed. Please make it so that the panel view can be different between Grid and Loupe.
Thank you

" It is not that much extra work to hit the tab key." Perhaps not. But doing so changes the state of all panels not just the left panel. I would like finer control for loupe view.
You are right though, it is not a high priority matter. I can make due as it is now. I just want it the other way.
Thanks

Similar Messages

  • More friendly drag-and-drop from grid view to folder

    From within the grid view, I do a multiple selection and drag the pictures to a folder on the left, to move all the pictures to that folder. If in the folder there is already a file with the same name as one of the selected pictures, the whole operation is cancelled. It is extremely annoying. LR might instead pop up a dialog asking if I still want to move the pictures that can be moved. Even better, the dialog should give options to overwrite the file in the destination folder, or to automatically re-name either file and stack them.

    ThatBenGuy wrote:
    On the page itself (icloud.com/iwork) it states "To get started, launch [Pages, Numbers, Keynote] on your iOS device and turn on iCloud."  This would lead me to believe you need to have the iOS version before you can even try using the icloud.com/iwork to upload files.
    I personally am not paying $10 just to test this, but if anyone else has tested this, it would be great to either confirm or deny this beyond just what I'm reading from it.
    Well, I have paid those 30 $ ( well 24 Euros ) for keynote,numbers and pages and yes you absolutely need at least one of these apps on your Device in order to unlock the "drag and drop" solution in the Browser. In other words - if you do not own a iDevice or not have one of that apps, you can't use icloud.com/iwork and its upload features at all.
    After all it is only for iOS iwork; Mac iwork09 does not sync to the cloud at all, regardless of "documents and data" set to yes in icloud on OSX.  On the contrary if you enable the same feature on your iOS5 device and set the iwork apps to store their documents in icloud, the syncing does start. So it kinda makes sense to force the presence of the iOS apps.
    iwork on iOS is pretty good, all 3 apps are high quality, come with those typical awesome templates and have tons of options to print,share and sync; but beware of the cloud storage thing : randomly documents in iCloud just delete themself.Go figure in the support forum for iwork for ios here - 100s users have experienced lost data using iwork for iOS in the cloud; So I turned this whole thing off again and sync my documents old fashioned via iTunes.

  • I guess there are not phone support...  I cannot drag images from grid view into collections.

    I have been trying desperately to fix this issue.  I cannot drag any images from the grid view into collections.  Can anyone help?  I looked everywhere for a  customer support number but I was not able to find one on Adobe Website. 

    Hi,
    Only a couple of things I can think of:
    1. Make sure it isn't a Smart Collection, and
    2. Drag by placing the cursor on the actual picture NOT the grey area surrounding the image.

  • LR won't load photos from Grid view

    Had this problem in 1.2 - uploaded 1.3 but no change.
    I just loaded over 2000 pictures into LR from a vacation, and now, when I click on a picture from the Grid in Library mode to try to open it, it hangs up, on the bottom of the screen the message "Rendering - File Changed" keeps appearing, and the Histogram flashes on & off. If I try to click on anything in Develop mode, the pciture hangs up, showing "Loading", and both side panels are flashing on & off.
    LR had not been doing this until today.
    And what is really odd is that it does not exhibit this behavior on ALL photos - but on a majority of them. In some cases, but not all, I had made some changes to the pic in LR, and when I made the changes that file was opening. But now it is not. But whether the file opens is random with respect to my having opened the file previously.
    Using LR on an iMac, OS - X 10.4.11.

    GP-
    I'd move to 1.3.1 for starters, then select a subfolder of the 2000 images and run "build previews" on it. See it that doesn't fix it; if it does, run same on all.

  • I cannot change from grid view to list view when i contol click on the downloads folder on the dock am i doing something wrong? if so how do i change the ?view in the dock

    when i contol click on the downloads icon in the dock i get the gris view . I thought if you control click, you are able to change the view to fan or list. am I doing something wrong.? Icheck to make sure the contol key is working by doing a screenshot and it works there. What am I doing wrong?

    Needs to be a Stack ?

  • Removing views (label) from tab views...

    Hello all,
    I am again presented with a troubling problem:
    Take a 3 tabs app based on the tab Bar Application Template.
    I am creating and displaying a label on tab 2 depending on an input from tab1 (a UIActionSheet with index 0 or 1)
    if index 0 is selected on tab1 Actionsheet, no label should be displayed on tab 2,
    if index 1 is selected on tab1 Actionsheet, a label (called here "appearingLabel") should be displayed on tab 2
    In order to avoid memory leaks and confusion, my approach is to destroy the label (if it was created) upon tab2 view's dissappearance :
    - (void)viewDidDisappear:(BOOL)animated
    if (appearingLabel == nil)
    NSLog(@"no label appearinglabel..."); //for debugging purposes
    else
    [appearingLabel removeFromSuperview];
    things start to work OK , but after a couple of switches from tab1/change in Actionsheet choice/tab2 : tab1..., I get en exception that "removeFromSuperview is called on a released object...
    According to the code above, how can that be ? Shouldn't
    {code
    [appearingLabel removeFromSuperview];
    {code}
    only be called if appearingLabel exists ? (not == nil) ?,?
    Any help would be appreciated...!
    thanks

    Hello Rick,
    Thanks again !
    I changed the code to :
    - (void)viewDidDisappear:(BOOL)animated
    if (appearingLabel == nil)
    NSLog(@"pas de label appearinglabel...");
    else
    [appearingLabel removeFromSuperview];
    appearingLabel = nil;
    works perfectly...
    I tried to replicate the
    if (cell == nil)
    line used in tableviews to create the cell that will be reused if it was not created yet...
    I will explore this issue further, but in the mean time, you got it to work !

  • How to Read Xml File and view into Data Grid View?

    hi all
    my Data into Xml file are:
    <Voucher>
    <Header>
    <txtHeaderId>259803</txtHeaderId>
    <txtDate>2015/02/01</txtDate>
    <txtDocNo>20</txtDocNo>
    <txtMemo>This is a Test .</txtMemo>
    </Header>
    <Item>
    <txtItemId>8562803</txtItemId>
    <txtHeaderRef>259803</txtHeaderRef>
    <txtDesc>This is Number 1</txtDesc>
    <txtDebit>350000</txtDebit>
    <txtCredit>0</txtCredit>
    <txtItemId>8562804</txtItemId>
    <txtHeaderRef>259803</txtHeaderRef>
    <txtDesc>This is Number 2</txtDesc>
    <txtDebit>0</txtDebit>
    <txtCredit>350000</txtCredit>
    </Item>
    </Voucher>
    now i have two DataGridViews 
    i want that data from xml file show into the DataGridViews by this codes:
    Private Sub btnReadXmlFile_Click(sender As Object, e As EventArgs) Handles btnReadXmlFile.Click
    Dim Document As XmlReader = New XmlTextReader(txtPath.Text)
    Dim ds As New DataSet
    ds.ReadXml(Document)
    DataGridView1.DataSource = ds.Tables(0)
    End Sub
    but i see this result:
    why i do not see any result into DataGridView2(Item)
    how to solve it ?
    please help me .
    thanks all
    Name of Allah, Most Gracious, Most Merciful and He created the human

    now how to correct it?
    Name of Allah, Most Gracious, Most Merciful and He created the human
    Please be explicit - I'm the only other one in this thread so I assume it's to me, but usually I just ignore the posts when the user isn't specific.
    I don't know what there is to correct. Create a NEW dataset in code, add the two tables, and use the methods that I suggested.
    I'm not a database guy so I can't get real specific. I create my own stuff in classes and use that but, if you're using SQL then there are lots of pro's here that can help you with specifics. I'm sure they'll need to know a lot more about your data, the
    connection, and all that, but the concept should be fairly simple to implement.
    Still lost in code, just at a little higher level.

  • Design view differs from browser view

    When viewing in Design view my code correctly shows 2
    overlapping rectangles. In browser view it shows two smaller
    rectangles that do not overlap. I am using DW MX 2004. I have
    attached small sample code.
    Thanks,
    Alexariel

    DMX2004's Design view is not a browser, and can only
    approximate (poorly)
    how a page will look. The browser is always right. For
    example, DMX2004 is
    insensitive to the CSS error here -
    div {width:250px; height:100;px; position:absolute; }
    (note the ';' between '100' and 'px')
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Alexariel" <[email protected]> wrote in
    message
    news:gqh83o$kld$[email protected]..
    > When viewing in Design view my code correctly shows 2
    overlapping
    > rectangles.
    > In browser view it shows two smaller rectangles that do
    not overlap. I am
    > using
    > DW MX 2004. I have attached small sample code.
    > Thanks,
    > Alexariel
    >
    > <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
    Transitional//EN"
    > "
    http://www.w3.org/TR/html4/loose.dtd">
    > <html>
    > <head>
    > <title>Untitled Document</title>
    > <meta http-equiv="Content-Type" content="text/html;
    charset=iso-8859-1">
    > <style type="text/css">
    > body {margin: 0px; padding: 0px;}
    > div {width:250px; height:100;px; position:absolute; }
    > div.one {background-color:#FF0000; left: 0px; top: 0px;
    > div.two {background-color:#00FF00;left: 75px; top:
    25px;}
    > </style>
    > </head>
    > <body>
    > <div class="one">one</div>
    > <div class="two">two</div>
    > </body>
    > </html>
    >

  • Background in live view different from design view

    Why when I am looking at my page in design view it shows up black like I want it to, but when I go to live view or view it on the internet it shows up like the template color that it was when started?

    Without the code, it's pretty tough to say what might be happening.
    One thing to look at would be the order of you css, including the links to external .css files in the <head> of the page.
    If you have two like selectors, for example, two versions of: body {background-color:some color here;}, the one that comes last in the stylesheet links, embedded css, or in the html itself (inline css) will be the one that's used by the browser.

  • Live view different from design view

    Hi folks,
    Does anyone know why, in dreamweaver, there is a difference between the site design in Design View and what you see in live view; and how should oneapproach this difference?
    Thanks.

    Design View was coded a LONG time ago and Adobe hasn't really changed it much. It is very useful for my workflow, which is to work in Split view and jump back and forth between the Design view pane and the Code View pane. I know right off the bat that I won't see everything. Design View will never show me the newer CSS3 attributes, like shadow, gradients and so on. But it gives me a "rough" analog to work with while I'm doing general layout. Things like, "Am I breaking up the text enough to keep people on my web page?" "Do I have this typeface too small?" "Is the picture I just put in there positioned correctly?"
    Also, be forewarned, "Live" view is Webkit (an Open Source browser) so it will accurately portray Google's Chrome and Apple's Safari. It will not accurately show issues with Firefox and Internet Exploiter. So, before you launch your website, do a check in all of the major browsers.

  • Design View differs from Live view problem

    I have Dreamweaver CS5.5 with Mac OS 10.7.3 on an iMac. I have the same set-up on a Macbook Pro 17
    The problem is that the Design view is showing different fonts and not picking up layout as per CSS style but the Live view is all correct.
    All is fine on the laptop so it is my iMac specific glytch
    I have checked the settings for diplaying CSS styles and they are ticked
    I have switched off the activation settings for Suitcase Fusion 3 in case of conflict there
    I have uninstalled and reinstalled Dreamweaver
    I think it a font-related problem as the design view only seems to want to display non-serif fonts.
    Am I doomed to only use the lap-top in my web work?
    I hope someone can advise as I am rather frustrated

    I think that's just the way it is...
    http://forums.adobe.com/message/4312435#4312435
    Martin

  • How to refresh one View instance from another View Instance

    Hi ADF Experts,
    I have a requirement in which I have created two View Objects based on a single entity object.
    I am using a first VO to display data in a table and the second to update data to database.
    The commit will happen through a Global save button.
    But before the global save, I need to show the data using the First VO, which is inserted using the second VO.
    Can anyone help me on how to refresh the first VO to display the data.
    Thanks in Advance
    Mohan
    Edited by: 946185 on Mar 29, 2013 4:24 AM

    Hi Dileep,
    The first VO which I mentioned is based on two EOs and has a lot of calculated values.
    And to add to my worries there is a parent child relationship between the two EO's, where in parent is updated with one row and child with multiple rows.
    The multiple rows updation to the child should happen with a shuttle component in a different popup.
    So I am inserting everything programatically in the java code, where I need two use different VO to update parent and different VOs for the shuttle.
    I could get the data, if it is committed, but to add to the complexity, there is a global save button which should commit the data.
    So I want to get the data based on the EO update before commit to the database.
    Thanks
    Mohan

  • Allow drag to panels from single view library or develop module

    In 1.1 it appears that you can only do it from grid view.
    Running Vista Ultimate.
    Thanks.

    Try it from the filmstrip in Loupe or Develop.
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.10 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • Why does iTunes grid view not remember default sort settings?

    Hello,
    I am using iTunes 8.1 and I like to use the Grid view (Artists). Using the Grid view and clicking on an artist to look at the albums, I like to sort the albums within using "Album by Year".
    Once I have made this change, it sticks until I close iTunes, so I can go into any other artist from Grid view and the albums will be listed using "Album by Year" automatically.
    When I restart iTunes and click on an artist in grid view, iTunes has reverted to sorting via the first column, the one with track numbers. I then have to manually click "Album by Year" to get it sorted again.
    I was wondering if anyone else has had this issue and if there is a solution to it? This also happened in iTunes before I upgraded to 8.1.
    Thanks

    Unfortunately, I can't offer any solution because I'm experiencing the same kind of trouble. Please help us! It would be greatly appreciated.
    Cheers,
    -- D

  • ITunes 8.0.1 Grid View & audiobooks

    I'm experiencing weird views when using Grid View for Audiobooks. I have a lot of them (many 2 or more files per book) and only 1 or 2 are actually clustered by title. All of the others are appearing as single books. One or two actually have correctly clustered the 2 parts for the title and display as one cover with (2 items) underneath.
    I've searched the forums and haven't found anything related to this. These are books by the same author with the same title, not compilations. Also, for the ones displaying "correctly," the titles are all formatted precisely the same as the ones displaying incorrectly. (Note: if I change to Artists view in Grid, it clusters all book files for that author under a single bookcover - obviously only correct for one of the books).
    Anyone have a clue how to make audiobooks clsuter correctly? These are all being downloaded from Audible.com and come with the same metadata for each title.
    Thanks!

    I have the same problem when I download from Audible.com. I gave them a call with no help. I suspect they are importing the audio book into itunes without sorting the download by book name somehow. If you get a response that helps pass it along. They basically said to look at it in the list view only. All the book artworks are loaded correctly but the grid view doesn't recognize the separate books.

Maybe you are looking for