Panel_grid ... reason for existance... ?!

Why is there a panel_grid tag? It does the same as a html table.... ? I understand that I can access and modify the component.. . so I could probably change the css style sheet and from one moment to the other it appears with a different background.... that's all?
thanx!

you can ask this question for every JSF HTML component defined in the spec

Similar Messages

  • I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

    I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
    The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
    * You have used the proper case; requests ARE case-sensitive!
    * You have entered the URL correctly. (i.e. proper directory/filename)
    * You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
    * You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
    * The user/file still exists on this server.
    I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
    == URL of affected sites ==
    http://facebook.com; buscagoogle.com

    I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

  • User Exists In Sales Order Creation Program for adding "Reason For Reject"

    Hi gurus
    I have following requriement
    As New Sales Order created (VA01) by default or at the time of saving the sale order, perticular "Reason for Rejection" should be set to each line item.
    This is then can be removed in change (VA02) with Mass change.
    We need this to review the sales order / block sales order from MRP run.
    Please let me know how to manage this or is there any user exist for the same.
    Thanks
    Sunil K

    Hi,
    As per my knowledge the automatic creation of rejection order is not possible, still will check out and know.
    but for urgent use you will have to follow the manual way of changing the line items from OK to blocked for apporoval so you can achieve their not passing on to MRP.
    manual way is what is described below:
    You can either reject the whole sales document or individual items.
    Reject all items:
    If you want to reject all the items, choose Reject document in the change modus for the sales document.
    The system automatically selects all the items and you can enter a reason for rejection in the following dialog box.
    Enter the appropriate reason for rejection and choose Copy.
    The system assigns the same reason for rejection to all the selected items.
    Reject individual items:
    If you only want to reject some of the items, select those items in the item overview screen and choose Edit - Fast change of... - Reason for rejection.
    A dialog box appears in which you can enter the appropriate reason for rejection.
    Enter the appropriate reason for rejection and choose Copy.
    The system assigns the same reason for rejection to all the selected items.
    Reject individual items with different reasons of rejection:
    If you want to enter different reasons for rejection for the items, choose the Reason for rejection tab page from the overview screen when changing the sales document.
    You can enter a different reason for rejection for each item in the Reason for rejection field.
    regards,
    Siddharth.
    Edited by: SD on Mar 15, 2008 10:22 AM

  • Reason for rejection for sale order stock existing line item

    Hi,
        I am giving reason for rejection for a line item where there is already sale order stock. Then I am getting a warning message like " there is sale order stock assigned". I want this message to be as error message. Any customisation (SPRO) is there for this?
    Kindly update.
    Ratna

    Dear Rama Rao
    I think, there is no problem you can ignore the warning message and go ahead give reason of rejection and close the order
    There wont be any problem absolutely
    The reason  of warning message is, (it is sales order created with item category with special stock indicator as E )  that means the system tells you that it is extra special stock which you have created and now you are trying to reject hence it alerts you by giving a warning  message
    The item category of the items which you are trying to reject  is marked  or should have been marked with special stock indicator (you can check that in VOV7)
    By double clicking warning message if it is of V4 message class in t code OVAH you can make that as no message
    But i doubt that this is available in OVAH
    Regards
    Raja

  • BAPI_SALESORDER_CHANGE to update reason for rejection of sales order item

    Hi,
    The FM BAPI_SALESORDER_CHANGE is not working properly as I am getting below error when try to update the reason for rejection at sales order item level.
    The delivery is done for this salesorder. Is it because the reason for rejection field is not as an input field when delivery done?
    error in return table is " Field 'ABGRU' cannot be changed, VBAPKOM 000010  ready for input"
    Request your suggestions to avoid this error.
    Thanks

    >
    anikaushi wrote:
    > Hi,
    > The delivery is done for this salesorder. Is it because the reason for rejection field is not as an input field when delivery done?
    >
    >  error in return table is " Field 'ABGRU' cannot be changed, VBAPKOM 000010  ready for input"
    >
    >
    > Thanks
    Yes, Most likely.. You can confirm this by trying to change a order without delivery and see if it goes thru (to ensure that you have passed correct parameters)...
    you may have to delete the delivery (and if billing document exist, cancel it), before you can reject the line item... it would be safer to raise an error message and let the users manually delete delivery document as long as you don't have large volumes of this scenario..
    Please see the SDN thread for how you can avoid this error...
    Re: Cancel Sale Order after Issued Billing

  • Dump while supplying Reason for Rejection in sales order

    Hi Gurus,
    when I am suppling the Reason for Rejection ("Cancelled") for a line item in existing Sales Order, the sales order is going to dump,this is the case with production system where as the same is working fine with testing system,ofcourse I am using different sales order numbers for both the cases....what may be the reason...
    Please suggest.
    Thanks for the help....Have a Nice Day..

    Hi
    Kindly post the error details.
    After dump, use t code ST22, click on today, click on the error & analyse.
    thank you.

  • To set reason for rejection for 3rd party order materials

    Hello,
    I have created the sales order with normal and 3 party materials, with reference to this order i have created the purchase order and delivered normal materials. after some period i am trying to put the reason for rejection code for 3 rd party materials. but the system is showing the error like " subsequent documents already exist for item xyz". then i deleted the purchase requestion and purchase eventhough system is showing the same message while i am trying to put the rejection in the Sales order.
    Could you plz let me know the reason why the system is not accepting to put the reason for rejection in the sales order  after deleting the PR and PO????
    Regards|KS

    Hi,
    Please refer to SAP note 392945,356895 and 403524.
    Thanks and best regards,
    Smile

  • Problem in creating new versions for existing DIR using CV01N

    I am working in SAP ERP 6.0 EHP 4.0 system.
    I have problem in creating new versions for existing DIR using CV01N
    I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
    once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
    The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
    The problem which i found was the document identification guid remains the same for all the document versions getting created.
    The same is working fine in SAP ERP6.0 EHP3.0 sytem.
    Please someone help me in resolving the above issue.
    Regards,
    Prasad.B

    There is a change in the standard code.The reason for the above problem was  because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
    IS-ADEC-MPD  - Enhancement to copy MPD data
    ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
    +*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
    +**ENHANCEMENT 1  ZSF_AD_MPD_SAPLCV110.    "active version**+
    +*** copy MPD relevant data from templ. doc to current doc**+
      +**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
        +**EXPORTING**+
          +**is_draw = ls_draw**+
        +**TABLES**+
          +**ct_drad = lt_drad.**+
    +*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
    Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
    The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
    Regards,
    Prasad.B

  • Error while giving Reason for Rejection

    Dear Gurus,
    When I want to close a Sales Order by giving a Reason for Rejection, system is giving an Error message as 'V1:901' and there is no explanation for it. Even in SE91 there is no entry for this error message.
    What is to be done now?
    Kindly help me in this.
    Thanks and regards.
    Venkat - Hyd

    When I checked to see the program ZV45AIZZ, system says it does not exist. Is this an own developed 'Z' program??
    Normally the error message V1:901 does not come for me too, but for some Sales Orders it is coming,  which I am seeing for the first time too!! So do not know why it is happening.
    There are no user exits for this line item and as I said there is no message explanation for this error message.
    Yes there are some subsequent documents in some cases, but I am trying to close all open Sales Orders / line items for the last financial year as that is an Audit point in our company, I cannot close / delet them under any circumstances, just need to close open line items.
    Any more inputs plz..
    Regards.
    Venkat - Hyd
    PS: Plz tell me, what are the dangers of leaving open Sales Orders or partially processed Sales Orders, i.e., open line items?? Do we have to close them compulsarily??

  • SAPSCRIPT: Creating new Language for existing form

    Hi Guys,
    I need add an additional language for an existing form. Italian is not available for the this existing form. How can I add this language? do I need to copy the form with language EN? how can I include that form in the existing form? or there are other way to do this? Thanks in advance!
    Regards,
    Michael Nacionales

    There is a change in the standard code.The reason for the above problem was  because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
    IS-ADEC-MPD  - Enhancement to copy MPD data
    ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
    +*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
    +**ENHANCEMENT 1  ZSF_AD_MPD_SAPLCV110.    "active version**+
    +*** copy MPD relevant data from templ. doc to current doc**+
      +**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
        +**EXPORTING**+
          +**is_draw = ls_draw**+
        +**TABLES**+
          +**ct_drad = lt_drad.**+
    +*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
    Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
    The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
    Regards,
    Prasad.B

  • Reason for rejection error message required

    Dear all
    When we do a reason for rejection for a configurable material or a sales order line item for which a sales order stock or production order exists,System doesn't throw a error message while trying to do reason for rejection for the line item in sales order.
    How to bring error message for a line item in sales order when subsequent order like production order exists for that sales order(make to configure mateiral) or sales order stock exists..
    Regards
    Sudha

    Hi
    My issue is solved.
    Have activated v4 -297 in message settings under SD

  • REASONS FOR REJECTION - SALES ORDER

    I would like to know if is it possible to change a reason for rejection that had already exist and it is not selected the item 'Not relevant for Billing'. I would like to select this item, this change influence on all sales orders that have already used this reason? If not, how can I reprocess all sales order that used this reason?
    Waiting your comments,
    Regards

    Hi
    Use T-Code MASS
    Object Type : BUS2032 Sale orders and Execute
    Regards,
    Prasanna

  • Reason for errors in IDCOS ? pls tell small scenarios

    hi pls tell practical scenarios reason for errors in idocs? all ale configuration are done.

    For a million reasons, but the most obvious one is that data in the IDoc doesn't match with the data in the receiving system. Eg. in IDoc field plant filled with 'PL01' but this plant doesn't exist in the system.
    Regards,
    John.

  • Can we select multiple Invalid Reasons for a single document in verifier?

    Hi all,
    Can anyone explain me how to select more than one invalid reasons in verifier?
    Cen we define new Invalid reason based on the predefined rules available in verifier?
    For ex: I wanted to use 2 rules one for 'Invoice amount do not add up' and for 'Missing/Invalid PO' under single Invalid Reason.
    Is it possible??
    If yes how can we impplement the same?
    Is there any workaround for the same?
    Thanks in advance.

    YVM wrote:
    Hi William,
    Thanks for your reply.
    But can we use a single custom invalid reason for which it will vaidate PO number and Amount also??
    Is it possible??
    Please help me out.
    I'm sorry, but I'm not even sure how to begin to answer this question. "But can we use a single custom invalid reason for which it will vaidate PO number and Amount also??"  What are you trying to set as invalid?  Why are you trying to validate other fields in spite of the fact the item already has some type of issue (which is understood since you are marking it as invalid)?
    Typically, you are going to set an invalid reason in order to get the item out of Verifier and into the EBS workflow process.
    "Exceptions" can also be set within Verifier (which is separate functionality from the invalid reasons) which would assign a new state code to an item to keep the item in Verifier instead of releasing it.  These special state codes would be set as accessible from certain workstations (with these workstations being operated by specialists who handle these specific issues).
    I'd suggest taking some more time to read the AP Solution Guide and the OFR documentation to understand what functionality already exists.  If I even vaguely understand what you are asking, you're asking for a customization that is far outside of the scope of this forum.  It will likely call for not only changes to the AP solution project, but the BPEL workflow code logic as well - which is way too much to cover in a forum post.

  • There's no reason for secrets (Free Code)

    I just wanted to say that I dont think there is anything wrong with copying code. You can learn so much from studying the completed puzzle enabling you to develop you conceptual foot hold in the language your learning and show you techniques in practice rather than in some vague text book abstraction that reveals no practical application that would help a beginner see it's value as a problem solving technique. Like studying a composition of Mozart or Chopin. There is so much to learn from seeing the completed formula and all the modularized mechanics that make up its functionality. I think that people who get hung up on revealing code are hiding their tricks. However, I do realize that some code must be private to serve its marketing agenda. Shool problems though? Come on. Who says you don't learn by looking at the answer? If that were the case, why ever look in a dictionary or any other resource for knowledge. Code is to be shared when it comes to learning. Anything else is just holding out for the sake of a selfish hording of knowledge. There's no reason for secrets.

    I'd say 90% of developers agree with that - however,
    Not every1 is a developer, other unskilled ppl,
    (for the sake of simplicity, i'll call them 'publishers' :P)
    exist to exploit the work of others, with the sole aim of maximizing profit.
    which do YOU value more, knowledge or wealth?
    (hmm - interesting catch 22 there...
    to gain knowledge, you need wealth
    to generate wealth, you need knowledge ;p)

Maybe you are looking for

  • Thread management in servlet

    Here is the problem that i am trying to solve - and get better understanding of issues to look out for. 1) Problem to solve Clients sends an http request to an distributor server. The request contains a list of tasks. Each such task can be sent to a

  • App updates in iOS 7

    Did I understand that the apps we're suppose to update themselves rather than going to the App Store and clicking on update all?

  • Data transfer into partition table took more time

    Scenario: We have a Staging table (consider it as Table A) which is refreshed Every month. Every month table A is truncated and inserted with 6 million records approx. Once the mandatory update done on Table A we have to move the records to main tabl

  • What will happen if i reset my ipad 2

    what happens if i reset my ipad 2

  • Resource selection in process order

    Dear Experts,                      I have a scenario where I want to group similar resources under specific resource types and finally arrive at a situation where if I try to change the resource in an order from the drop-down menu in the resource fie