Panel groups greyed out

even after a computer reboot, problem persists in which some panel groups (such as Design, Code etc - on the right side of the screen) are greyed out, meaning there is a grey area instead of the panel groups being visible. Each time a panel group is closed, it joins the ranks of being greyed out. Does this mean Dreamweaver needs to be re-installed?
My version is MX 2004.
Please help!!

Don't reinstall yet.
First take a look here, and perhaps start with item #4:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19105#dat
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Similar Messages

In Dreamweaver CS6, the Plus (+) button in the Server Behaviors panel is greyed out. How do I make it operational?

I am trying to restrict access to a page by redirecting unauthorized users to another page. The Adobe manual instructs me to:
Open the page you want to protect.
In the Server Behaviors panel (Window > Server Behaviors), click the Plus button and select User Authentication > Restrict Access To Page from the pop‑up menu.
I opened the page and went to the Server Behaviors panel.
Unfortunately, the Plus button is greyed out and not operational. How do I make the Plus button operational so that I can then select User Authentication, etc?
Charlie

You can't apply server behaviors to pages that don't contain (or are specified to be when they are created) server scripting. That means they must have the proper filename extension, e.g., filename.php or filename.aspx/

New User/Group greyed out

Running OS X Server 10.4.10. Fresh install as of today. Have OD Master set up and one test account is successfully authenticating. When I join it to the AD domain, it works as well with AD credentials.
For some reason, New User and New Group is greyed out. This was not the case before. I am authenticated to WGM using diradmin, but adding and deleting users is greyed out.
I've ran Repair Permissions in Disk Utility. No help yet. This is frustrating.
Help!

Tony,
I called Apple and talked to an Edu Server guy who had me unbind from LDAP, reboot and rebind. That fixed it! My server is now doing what I want it to do and I am rather happy.

"Get External Data Group" greyed out

I'm having the same problem as someone else whose Excel 2010 the "Get External Data" is grayed out was also greyed out. There was a suggestion to clear the old external data. How do you clear old external data?

Hi,
Please confirm the following situations:
Once double click a cell, the “Get External Data” will be greyed out.
One you select a cell in a table, the “Get External Data” will be greyed out.
Check whether the workbook or worksheet is protected.
Jaynet Zhang
TechNet Community Support

Global Storage Settings Panel Options Greyed Out

• Microsoft Windows 7 Ultimate SP1 64bit (brand new installation, all updates installed)
• Mozilla Firefox 4.1
• Adobe Shockwave Flash 10.2.159.1
Some websites with Flash content (such as YouTube) work perfectly fine - however on others (such as Nostalgia Critic), the Flash content will load (I can access the right-click menu) but will not play/show.
I have narrowed the cause down to the Flash Player not remembering any changes I make to the Global Settings Manager. The Allow third-party Flash content to store date on your computer check-box is greyed out and I cannot select it.
Reading through all related forum threads I could find (both here and across the 'net), it has been repeatedly stated that the best solution is to delete the %APPDATA%\Adobe and %APPDATA%\Macromedia folders, however neither currently exists in my %APPDATA% folder.
I am completely stumped! It shouldn't be all that difficult to get this working, should it?

You're correct Willener, it was past midnight when I wrote my original post so I wasn't too specific in regards to the Adobe and Macromedia folders.
One of the first things I checked was to make sure that the SYSTEM account had full permissions to the %APPDATA% folder and I should state that this problem persisted across multiple Windows 7 Ultimate installation attempts (5 in total, across seperate three system drives).
I've tried everything I can think of, the latest of which was (temporarily) installing my work's copy of Adobe Creative Suite 5 in the vain hope that the Flash component of that would 'fix' my lack of Adobe\Flash and Macromedia\Flash folders.
Other applications have not had any issue creating folders in %APPDATA%, including Internet Explorer, Mozilla Firefox and imgBurn - so I was completely lost.
In utter desperation, I copied my partner's Adobe\Flash and Macromedia\Flash folders from her PC (which was installed with the same Windows 7 Ultimate 64-bit SP1 disc (and a seperate TechNet key)) a month ago and voilà - problem solved!
I have no idea why that worked, but it did (as a future reference for anyone who's encountered the same issue as I have).

Metadata Panel in Bridge - Greyed Out - what did I do?

I am using CS2 and the metadata panel (view - Metadata panel) is greyed out. What can I do to make it active?
Thanks very much.
Joanne

Does it gray out for files in other folders, have you tried to create a new window?
Check if your files are not write protected or locked and try to reset the preferences. In Bridge 2 that means holding down the shift + option + command key while restarting bridge and check the rest options you will.
Don't know if that is the same for Bridge 1 but you can try.

Why is my 'SIGN' panel greyed out in X1 Pro 11.0? - 'signing' IS 'allowed' in permissions...

Hi guys. So i have been sent a PDF to sign and return by E-mail. The problem is, the 'sign' panel is 'greyed' out, so i am unable to.
I checked permissions and signing is 'allowed' for this document.
Must i enable additional features?
[There is no red arrow at the signature line.]
I have a scanned signature ready to go on my PC.
All the help videos on this subject are for earlier versions, that have different menus, so they are of little help.
Even if you don't know what the problem is, if i knew how to 'enable additional features' that would be a start.
Thanks,
Robdobe
Windows 7 64bit
12 Gig Ram
Intel Quad core 2.8GigHz.

I know mostly digital (PKI-certificate-based) signatures. I cannot expertly advise on other signature types. It is possible that the form that you had, had an expiration date on it (was Reader-extended with a certificate that expired after a certain date). That might explain why your co-worker was able to sign and you weren't, if you got the unsigned copy from her and not from the same source where she got it. If you got not the same copy but from the same source, you may have gotten a copy with the signing already disabled. The other possibility is that the form might execute comminications with the author's server to get authorization to sign and that authorzation failed. There are many ways a form can be constructed that cause this behaviour. Since you know that the document's author disabled signing the question is now moot and I do not see why we should speculate on a possible reason.

Properties & tools are greyed out

Hi,
Whenever I open a new document in Flash CS5 Pro, the properties & tools panels are greyed out. Does anyone know how to fix this? Thanks in advance.
pjirles

new document "Action Script 3.0" or new document "Action Script File"
Action Script File is only code then all panel are disableds

Hyper-V platform remains greyed out in control panel

It appears I meet the pre-reqs but when I go to enable Hyper-V via the control panel the Hyper-V platform option is greyed out.
I have Windows 8 Pro 64-bit and run both coreinfo and the AMD tool (amdvhyperv) which suggest I'm set to go.
Not sure what else to check.
AMD Phenom(tm) 8450 Triple-Core Processor
AMD64 Family 16 Model 2 Stepping 3, AuthenticAMD
HYPERVISOR - Hypervisor is present
SVM * Supports AMD hardware-assisted virtualization
NP * Supports AMD nested page tables (SLAT)
AMD Phenom(tm) 8450 Triple-Core Processor
AMD64 Family 16 Model 2 Stepping 3, AuthenticAMD
HTT             *       Multicore
HYPERVISOR      -       Hypervisor is present
VMX             -       Supports Intel hardware-assisted virtualization
SVM             *       Supports AMD hardware-assisted virtualization
EM64T           *       Supports 64-bit mode
SMX             -       Supports Intel trusted execution
SKINIT          -       Supports AMD SKINIT
NX              *       Supports no-execute page protection
SMEP            -       Supports Supervisor Mode Execution Prevention
PAGE1GB         *       Supports 1 GB large pages
PAE             *       Supports > 32-bit physical addresses
PAT             *       Supports Page Attribute Table
PSE             *       Supports 4 MB pages
PSE36           *       Supports > 32-bit address 4 MB pages
PGE             *       Supports global bit in page tables
SS              -       Supports bus snooping for cache operations
VME             *       Supports Virtual-8086 mode
RDWRFSGSBASE    -       Supports direct GS/FS base access
FPU             *       Implements i387 floating point instructions
MMX             *       Supports MMX instruction set
MMXEXT          *       Implements AMD MMX extensions
3DNOW           *       Supports 3DNow! instructions
3DNOWEXT        *       Supports 3DNow! extension instructions
SSE             *       Supports Streaming SIMD Extensions
SSE2            *       Supports Streaming SIMD Extensions 2
SSE3            *       Supports Streaming SIMD Extensions 3
SSSE3           -       Supports Supplemental SIMD Extensions 3
SSE4.1          -       Supports Streaming SIMD Extensions 4.1
SSE4.2          -       Supports Streaming SIMD Extensions 4.2
AES             -       Supports AES extensions
AVX             -       Supports AVX intruction extensions
FMA             -       Supports FMA extensions using YMM state
MSR             *       Implements RDMSR/WRMSR instructions
MTRR            *       Supports Memory Type Range Registers
XSAVE           -       Supports XSAVE/XRSTOR instructions
OSXSAVE         -       Supports XSETBV/XGETBV instructions
RDRAND          -       Supports RDRAND instruction
CMOV            *       Supports CMOVcc instruction
CLFSH           *       Supports CLFLUSH instruction
CX8             *       Supports compare and exchange 8-byte instructions
CX16            *       Supports CMPXCHG16B instruction
DCA             -       Supports prefetch from memory-mapped device
F16C            -       Supports half-precision instruction
FXSR            *       Supports FXSAVE/FXSTOR instructions
FFXSR           *       Supports optimized FXSAVE/FSRSTOR instruction
MONITOR         *       Supports MONITOR and MWAIT instructions
MOVBE           -       Supports MOVBE instruction
PCLULDQ         -       Supports PCLMULDQ instruction
POPCNT          *       Supports POPCNT instruction
SEP             *       Supports fast system call instructions
LAHF-SAHF       *       Supports LAHF/SAHF instructions in 64-bit mode
DE              *       Supports I/O breakpoints including CR4.DE
DTES64          -       Can write history of 64-bit branch addresses
DS              -       Implements memory-resident debug buffer
DS-CPL          -       Supports Debug Store feature with CPL
PCID            -       Supports PCIDs and settable CR4.PCIDE
PDCM            -       Supports Performance Capabilities MSR
RDTSCP          *       Supports RDTSCP instruction
TSC             *       Supports RDTSC instruction
TSC-DEADLINE    -       Local APIC supports one-shot deadline timer
TSC-INVARIANT   *       TSC runs at constant rate
xTPR            -       Supports disabling task priority messages
EIST            -       Supports Enhanced Intel Speedstep
ACPI            -       Implements MSR for power management
TM              -       Implements thermal monitor circuitry
TM2             -       Implements Thermal Monitor 2 control
APIC            *       Implements software-accessible local APIC
x2APIC          -       Supports x2APIC
CNXT-ID         -       L1 data cache mode adaptive or BIOS
MCE             *       Supports Machine Check, INT18 and CR4.MCE
MCA             *       Implements Machine Check Architecture
PBE             -       Supports use of FERR#/PBE# pin
PSN             -       Implements 96-bit processor serial number
PREFETCHW       *       Supports PREFETCHW instruction
Logical to Physical Processor Map:
*-- Physical Processor 0
-*- Physical Processor 1
--* Physical Processor 2
Logical Processor to Socket Map:
*** Socket 0
Logical Processor to NUMA Node Map:
*** NUMA Node 0
Logical Processor to Cache Map:
*-- Data Cache          0, Level 1,   64 KB, Assoc   2, LineSize 64
*-- Instruction Cache   0, Level 1,   64 KB, Assoc   2, LineSize 64
*-- Unified Cache       0, Level 2, 512 KB, Assoc 16, LineSize 64
*** Unified Cache       1, Level 3,    2 MB, Assoc   1, LineSize 64
-*- Data Cache          1, Level 1,   64 KB, Assoc   2, LineSize 64
-*- Instruction Cache   1, Level 1,   64 KB, Assoc   2, LineSize 64
-*- Unified Cache       2, Level 2, 512 KB, Assoc 16, LineSize 64
--* Data Cache          2, Level 1,   64 KB, Assoc   2, LineSize 64
--* Instruction Cache   2, Level 1,   64 KB, Assoc   2, LineSize 64
--* Unified Cache       3, Level 2, 512 KB, Assoc 16, LineSize 64

Still no joy. BIOS says it's enabled, SystemInfo says it's not.
CoreInfo.exe says this:
Coreinfo v3.2 - Dump information on system CPU and memory topology
Copyright (C) 2008-2012 Mark Russinovich
Sysinternals - www.sysinternals.com
Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz
Intel64 Family 6 Model 58 Stepping 9, GenuineIntel
HTT * Hyperthreading enabled
HYPERVISOR - Hypervisor is present
VMX * Supports Intel hardware-assisted virtualization
SVM - Supports AMD hardware-assisted virtualization
EM64T * Supports 64-bit mode
SMX - Supports Intel trusted execution
SKINIT - Supports AMD SKINIT
NX * Supports no-execute page protection
SMEP * Supports Supervisor Mode Execution Prevention
SMAP - Supports Supervisor Mode Access Prevention
PAGE1GB - Supports 1 GB large pages
PAE * Supports > 32-bit physical addresses
PAT * Supports Page Attribute Table
PSE * Supports 4 MB pages
PSE36 * Supports > 32-bit address 4 MB pages
PGE * Supports global bit in page tables
SS * Supports bus snooping for cache operations
VME * Supports Virtual-8086 mode
RDWRFSGSBASE * Supports direct GS/FS base access
FPU * Implements i387 floating point instructions
MMX * Supports MMX instruction set
MMXEXT - Implements AMD MMX extensions
3DNOW - Supports 3DNow! instructions
3DNOWEXT - Supports 3DNow! extension instructions
SSE * Supports Streaming SIMD Extensions
SSE2 * Supports Streaming SIMD Extensions 2
SSE3 * Supports Streaming SIMD Extensions 3
SSSE3 * Supports Supplemental SIMD Extensions 3
SSE4.1 * Supports Streaming SIMD Extensions 4.1
SSE4.2 * Supports Streaming SIMD Extensions 4.2
AES * Supports AES extensions
AVX * Supports AVX intruction extensions
FMA - Supports FMA extensions using YMM state
MSR * Implements RDMSR/WRMSR instructions
MTRR * Supports Memory Type Range Registers
XSAVE * Supports XSAVE/XRSTOR instructions
OSXSAVE * Supports XSETBV/XGETBV instructions
RDRAND * Supports RDRAND instruction
RDSEED - Supports RDSEED instruction
CMOV * Supports CMOVcc instruction
CLFSH * Supports CLFLUSH instruction
CX8 * Supports compare and exchange 8-byte instructions
CX16 * Supports CMPXCHG16B instruction
BMI1 - Supports bit manipulation extensions 1
BMI2 - Supports bit maniuplation extensions 2
ADX - Supports ADCX/ADOX instructions
DCA - Supports prefetch from memory-mapped device
F16C * Supports half-precision instruction
FXSR * Supports FXSAVE/FXSTOR instructions
FFXSR - Supports optimized FXSAVE/FSRSTOR instruction
MONITOR * Supports MONITOR and MWAIT instructions
MOVBE - Supports MOVBE instruction
ERMSB * Supports Enhanced REP MOVSB/STOSB
PCLULDQ * Supports PCLMULDQ instruction
POPCNT * Supports POPCNT instruction
SEP * Supports fast system call instructions
LAHF-SAHF * Supports LAHF/SAHF instructions in 64-bit mode
HLE - Supports Hardware Lock Elision instructions
RTM - Supports Restricted Transactional Memory instructions
DE * Supports I/O breakpoints including CR4.DE
DTES64 * Can write history of 64-bit branch addresses
DS * Implements memory-resident debug buffer
DS-CPL * Supports Debug Store feature with CPL
PCID * Supports PCIDs and settable CR4.PCIDE
INVPCID - Supports INVPCID instruction
PDCM * Supports Performance Capabilities MSR
RDTSCP * Supports RDTSCP instruction
TSC * Supports RDTSC instruction
TSC-DEADLINE * Local APIC supports one-shot deadline timer
TSC-INVARIANT * TSC runs at constant rate
xTPR * Supports disabling task priority messages
EIST * Supports Enhanced Intel Speedstep
ACPI * Implements MSR for power management
TM * Implements thermal monitor circuitry
TM2 * Implements Thermal Monitor 2 control
APIC * Implements software-accessible local APIC
x2APIC * Supports x2APIC
CNXT-ID - L1 data cache mode adaptive or BIOS
MCE * Supports Machine Check, INT18 and CR4.MCE
MCA * Implements Machine Check Architecture
PBE * Supports use of FERR#/PBE# pin
PSN - Implements 96-bit processor serial number
PREFETCHW * Supports PREFETCHW instruction
Logical to Physical Processor Map:
**-- Physical Processor 0 (Hyperthreaded)
--** Physical Processor 1 (Hyperthreaded)
Logical Processor to Socket Map:
**** Socket 0
Logical Processor to NUMA Node Map:
**** NUMA Node 0
Logical Processor to Cache Map:
**-- Data Cache 0, Level 1, 32 KB, Assoc 8, LineSize 64
**-- Instruction Cache 0, Level 1, 32 KB, Assoc 8, LineSize 64
**-- Unified Cache 0, Level 2, 256 KB, Assoc 8, LineSize 64
**** Unified Cache 1, Level 3, 4 MB, Assoc 16, LineSize 64
--** Data Cache 1, Level 1, 32 KB, Assoc 8, LineSize 64
--** Instruction Cache 1, Level 1, 32 KB, Assoc 8, LineSize 64
--** Unified Cache 2, Level 2, 256 KB, Assoc 8, LineSize 64
Logical Processor to Group Map:
**** Group 0

How to grey out the Account Assignment Group Fld in Billing Doc Line Item

Hi SD Guru's
I have a small doubt.
I have maintained account assignment group in material master. Now when i create an order , the account assignment group gets picked from material master into this sales order.
Now i go to VF01 for doing the invoicing.
Now i can still go to billing document line item against the material and change its account assignment group before raising the invoice. When i change this field, i can still post to accounts.
I want to know is there any way in which we can restrict the way in which this field is greyed out and is made non-editable, so that only correct entries with account assignment group maintained in material master are posted.
Answers will be appreciated.
Kind Regards
Ravi

Hi,
Sandeep can you please give me step by step process of using SHD0 in this case.
Now if i apply this to transaction VF01 and VF02, would it apply for all billing document types? I dont want that, i want it to work for a specific billing type
Kind Regards
Ravi

Sales office and sales group should greyed out..

Hi All,
I have a requirement here where the sales office and sales group in sales order should greyed out once billing is done for the sales order.
Kinldy suggest how can we achieve this.
Thanks,
Pavan.

You can use program MV45AFZZ and USEREXIT_FIELD_MODIFICATION
more information is here.
https://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm

Mac OS 10.6.8. In address book I have tried to delete some groups (created when I created an account in mail which I then subsequently deleted). However in address book edit the delete button is greyed out.

I cannot delete groups in address book because the delete button is greyed out. I have deleted the original mail accounts which created the address book. I could just leave the groups there but the problem it creates is that address book tries to connect to the relevant server every time I open mail, then I get various error messages because it cannot connect. Thanks for any assistance.

I found this link for a similar problem someone had with a Lotus Notes account. I used it to resolve my issue with a different email account (basically followed the same steps, and then looked for the particular account I needed to delete)... hope it helps!
http://aumja24-usa.blogspot.com/2010/10/iphone-removing-lotus-notes-traveler.htm l

Extensions Panel greyed out in Photoshop CC on a Mac. Can't open Mini Bridge

I've just (yesterday) joined the Adobe Cloud, with full access to all the Adobe programs.
Opening Photoshop, I also wanted Mini Bridge open but the 'Extensions' item on the 'Window' menu is greyed out and can't be selected.
I've tried opening Bridge first, the Photoshop and vice versa, either way, the problem is the same. I've checked the Photoshop Preferences under 'Plug Ins' and made sure 'Load Extensions Panel' was ticked (which it was originally)
So, basically, no matter what I try, the Extensions Panel seems to remain greyed out.
Can any of you good people come up with the reason why this is happening and how I can solve i please?
Many thanks in advance
Steve

Phil Dx wrote:
<deleted>
My main plug-in (resize 8) is not yet compatible, and so PS thinks there are no extensions, hence it's greyed out. but it took several days of troubleshooting to find this out.
If your resize 8 plug-in is from onOne then you need to install version 8.5.1 for the plug-ins to be available through extensions. Even before the 8.5.1 update to the suite the resize 8 plug-in was available via the File->Automate... menu item after a re-install of the suite so it detected CC 2014.

Help with "greyed out" option for Publishing a group of Parameters in Motion 5!

How do you group published parameters in Motion 5, so that you don't have one giant list of published options for Final Cut Pro X?
My main goal is To publish a compound parameter (a parameter with nested subparameters)
Looking through Motion Help, it should be as easy as clicking the little disclosure triangle on the right of the inspector, but the word "Publish" is greyed out...

I know I've looked at rigging, but based off the Motion Help Online Manual, It should be as simple as clicking on the option for publish and have nested subparameters...
Rigging is excellent, but more steps would be needed to do the same thing i believe...

Problems with images greyed out. Downloaded folder not showing up in Left Panel

Downloaded folder and it showed up in Lightroom. Next day images greyed out Folder doesnt show in Left Panel. Lightroom says no images to Import. What do I do?

Mirrors_Winter wrote:
Thanks so much dj for your response. Unfortunately I did start in the Library module and the folder wasn't there to click on. It was really strange, but the usual 'Previous Import' link wasn't showing anything! That's why I tried to reimport.
If the folder doesn't show in your Library module, then you probably (accidentally) imported the photos using the MOVE option instead of the ADD option. You have to search for the desired photos by file name, and NOT by folder. Perform all of the following 4 steps, and you will find your photos
Go to the Catalog Panel on the left in the Library Module and click on All Photographs
Turn off all filters (Ctrl/Cmd-L once or twice)
Expand all Stacks (Photo->Stacking->Expand All Stacks)
Search by file name

Panel groups greyed out

Similar Messages

Maybe you are looking for