Panel interface horizontal ruler not showing in code

Hi I have just reinstalled Dreamweaver cs5 onto a new computer (pc), I have opened up an existing web page I am currently working on, only to find the horizontal ruler at the bottom of the code box is no longer showing as it was on the other computer, because my lines where long it was handy to scroll horizontally to keep my code tidy, the vertical ruler appears.
Cheers

The namespaces is displayed in black.
I'm using http://sap.com/xi/WS for the namespaces. Is it a problems?
Hi,
If you look under the document (Shift + F1) in SPROXY, click on Generation Tips.
It says,
If a SWCV that has been created in the SLD is not visible in the navigation tree in transaction SPROXY, note the following:
SAP components (Vendor = 'sap.com'):
The navigation tree only displays the software component versions that are installed in this system (see table CVERS, or choose System -> Status... and then the Component information pushbutton).
Non-SAP components (Vendor is not 'sap.com'):
All components are displayed.
You need to rename your namespace i guess.

Similar Messages

Mail info panel top line does not show subject or from subsequent lines do.

mail info panel top line does not show subject or from, subsequent lines do.

DOrk4L,
Have you tried re-calibrating the battery? To re-calibrate it, let the battery drain completely and then charge it fully. You should see correct battery usage after that.
Hope this helps,
Jennifer B.

RAR Organizational Rules not showing/working on RAR 5.3_13.3

Hello Guys,
We are facing some problems during RAR Organizational Rules implementation. After creating our risk matrix (along with all functions) we start refining it with Org. Rules, accordingly to our company needs.
Unfortunatelly, after doing some tests, we found out that all created organizational rules are not working. They simply do not show on our reports (Risk Analysis > Organizational Level section). Any advice on that? I already went through the "How-To Guides" and a few SAP Notes (987031) without succeed.
As a business example, we have the need of certifying that a critical access (already mapped in a Critical Action Risk Type) is not a False Positive, checking also the organizational level for that specific activity (Company Code values) so, we are doing the following:
1) In a given Auth. Obj, we are activating BUKRS field, with $BUKRS value;
2) Created an Organization Rules. (e.g Org. Rule Company01 with BUKRS = COMP, and tagged RISK ID RK01*)
3) Re-generate/Update all risk rules
4) Ran Organizational User Mapping Job
5) Executed an Risk Analysis (Risk Analysis > Organizational Level section).
The results of report are the same as a regular risk analysis. No Organizational Rule were found in our result (in Org. Rule Description columm) but just all users with ANY risk.
Besides , the Org. Rule report ran the Risk analysis for ALL RISKS of our Matrix, not only for those mapped in our Org. Rule (RK01). Is this working properly? The organizational report should not only run a report for previously mapped risks ??? (in our business example, an report result with only users with Critical Access risk RK01 and with any Auth Obj with BUKRS Field value COMP!?)
Can anyone help us on the error above?
Thank you,
Best Regards,
Adam

Hi Natasha,
Reviewed the situation and suggest a work around. Just try whether the same is working or not.
As mentioned the roles are assigned to HR positions of the users and not to user ids. In that case in RAR under configuration tab go to 'user mappings' where you can map user id with the organisation position for the respective users in the particular system.
I suggest you can test it for one user and if works fine you can replicate for other users.
regards,
Jwalant

Spry horizontal menu- not showing in some browsers

my spry horizontal menu is showing up as a vertical list in
some of our viewers computers. can i adjust the basic html so that
if spry does not show up on someone's computer, a more basic
horizontal table will show?

Thank you all for the answers.
Can pop menu magic work with image maps?
Back in the day I created several drop down menus in Dreamweaver CS2 by adding behaviors to image maps. I liked that I pretty much could drop a menu from any point on an image.
Example: http://www.bettendorfdental.com/
So I have been going back to my old laptop and CS2 every time I needed to change something in these menus, but that was very inefficient.
My client wants the top banner to be in one image, with customized buttons that share the background of the logo and business name.
I have been customizing the topaz template in pop up magic but what the client reallly wants is to have the tab images as part of the larger image. So ideally there wouldn't be any text in the top menu and only the drop down part would show up.
http://www.monicagraphicdesign.com/Bill/spiritual.html
For people like me, who do not write or understand code, even searching a knowledge base can be a challenge because we do no know what to type in the search box! I am glad to learn Project Seven offers one on one support.
Another challenge is that the client manages his own site and uses Front Page on a PC (and I have neither) so I don't even know if he can attach the stylesheets to every page where he inserts the menu.

Business rule not showing the result

When i am executing a business rule, it runs successfully but it does not show any result. But when i enter any amount in that specific cell where the BR should calculate the amount and then run the BR then it shows me the required result. What can be the reason for that?
We are on 11.1.2
and im making BRs through Calc Manager (Wizard Based)
Edited by: ar_aff on Mar 24, 2011 9:56 PM

I think that's about Block problem (value of a cell). The BR can't open block automatically. In BR sorce usually used a command Set Createnonmissngblk on before calculating value;

Horizontal Axis not showing when initial loading

Hi,
We are on Dashboard 4.1 SP3.
I have drilling down configured on the Dashboard report. The issue is when initial loading the dashboard. the horizontal text are not showing completly, untill I click the other column of the parent column, it shows the child horizontal text.
Could you please help.
Thanks,

Hi Dave,
There are some issues still in displaying the horizontal axis.
1844514 - Dashboard X axis labels are cutoff
As a workaround what you can do, use the range slider to make the date text to display vertically rather than horizontal or you can enlarge the size of the chart at the max to make them to display vertical.
Hope this helps!!!
--SumanT

New inbox rule not showing up in Outlook 2007 client

I have made a rule for testing with the Exchange Management Shell. The rule worked. My problem lies in that the end-users have Outlook 2007 for the client software but the rule I create isn't visible (though it is working). The end-user needs to be able
to switch the rule on and off still. The rule does show up in the Outlook Web App however. I can't figure out why the rule isn't list in the Outlook 2007 client. Any ideas on how to fix this?

Hi AMartin89,
Thank you for your question.
Did you rebuild profile to check if the issue persist?
Did the issue occur on all users?
Could you post command which you create Inbox rule on PS?
What is you outlook version? We could update outlook to latest version to check if the issue persist.
We could configure profile on outlook 2010 to check if the issue persist.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Properties panel (for Content Types) not showing when creating sharepoint based document

Hello,
I've created three Content Types to populate when creating a new Budget document. The problem I'm seeing is that my pc always opens the Budget doc in Word Online and the properties box does not show. When I create a new Budget doc with my test pc, where
it always opens in Word, the properties box does show the three Content Types.
Is the idea of Content Type and the properties window supposed to work in Word Online?
My pc is Win 7, Office 2010 and IE 11
My test pc is Win 8, Office 2013 and IE 10
Thanks

Hi Jimbo, they don't work online. You should change your library settings to open documents in client program.
cameron rautmann

PS cs4 horizontal ruler not accurate

I like to set lines for cropping on the canvas. The vertical ruler is perfectly accurate. The horizontal ruler is off by alot. This is on cs4. The canvas size is adjusted to be A2 (420x594mm) The crop marks are with the ruler in inches to 16x20.

This can be a problem with the specific printer driver and its utilities.
What does your image look like in the Print>Preview?
Good luck,
Hunt

Spry Horizontal Menu not showing up in IE

I created a spry drop down menu (horizontal) with Dreamweaver CS5.
It displays great in all browsers, except for Internet Explorer, where the menu is not visible at all.
http://www.monicagraphicdesign.com/Bill/spiritual.html
I read on other threads about similar issues (problems with IE) that spry is no longer supported by Adobe, but that it still is part of CS6. (?)
Can these issues with IE be resolved? Or...
Should I be looking into other software or plug-ins for Dreamweaver? If so, what would be the best choice for someone who is not a programmer?
I use a Mac.
Thanks.
Moni

Thank you all for the answers.
Can pop menu magic work with image maps?
Back in the day I created several drop down menus in Dreamweaver CS2 by adding behaviors to image maps. I liked that I pretty much could drop a menu from any point on an image.
Example: http://www.bettendorfdental.com/
So I have been going back to my old laptop and CS2 every time I needed to change something in these menus, but that was very inefficient.
My client wants the top banner to be in one image, with customized buttons that share the background of the logo and business name.
I have been customizing the topaz template in pop up magic but what the client reallly wants is to have the tab images as part of the larger image. So ideally there wouldn't be any text in the top menu and only the drop down part would show up.
http://www.monicagraphicdesign.com/Bill/spiritual.html
For people like me, who do not write or understand code, even searching a knowledge base can be a challenge because we do no know what to type in the search box! I am glad to learn Project Seven offers one on one support.
Another challenge is that the client manages his own site and uses Front Page on a PC (and I have neither) so I don't even know if he can attach the stylesheets to every page where he inserts the menu.

BRF+ Routing Rule not showing Expression

Hi Experts,
I am trying to create a BRF+ routing rule (line item by line item) within SAP Standard Process ID - SAP_GRAC_ACCESS_REQUEST
The purpose is to use it as a detour based upon Role attributes. Although the rule is generated in ABAP screen, when I try to modify BRF+ rule, the Expression where decision table is located, not coming up.
When I test it, it gives error - Expression not set.
What could be the issue? Need your help.
Thanks & Regards,
Sabita

Hi Sabita,
Definitely look up those courses! I'm an instructor for them in the UK and these sorts of questions are exactly those which most people ask on the courses!
GRFN_MW_S_ROUTING is a structure which contains those two fields. This should be the Result Data Object which will then automatically place those two fields as the results.
The Condition columns are user driven inputs where you give the criteria for the routing rules e.g. Business process or role criticality etc.
For routing rules or initiator rules, there are two sources for the information; the request header (attributes of the request) or the request line items (attributes of the roles on the request). There are some fields which may exist in both (e.g. Business process for the access request or the business process assigned to the Role) which explains why there are duplicates in the list. When selecting the conditions, scroll right to the bottom of the list and you'll find the Structures which show Header or Line Item. If you expand those, then you will see the list of fields again. By doing this, you'll know whether you're looking at the header or line item field.
Select the appropriate fields as the columns and then add in the rows to identify the specific criteria.

Not showing Currency Code on Print Layout

Hi to everyone,
Is there a possibility not to show the currency code on the document layout, ie, when printing document
Thanks
Kentish

Hi Kentish,
That would be depending on each document. You may change variable to a database field to show amount without currency code.
Thanks,
Gordon

Design not showing only code

Hello, I have Dreamweaver showing both the code and design
view. However, when I type in the code and want to see the design
in split screen, only the code is showing in the design window. I
am using a table to add some images. For my table I know have a
greeen outline of the table that shows the layout, which I did not
have last time I did a table. Not sure what is going on. Thanks for
any help.

take a look in the dw menu-->View-->Table View
Which one has a checkmark next to it?
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Flash panel in PS CS5 not showing up

I am tryig to build a simple flash panel followig some tutorials from the old panel sdk which uses flex 3. Since its all flex 4 and flash builder now some things arent lining up Anyhow, i have the swf building ok with a simple label. I can view it in the browser ok, but trying to load it up in PS just gives me an empty panel.
Is there any way to debug this or get some sort of error log to see where the problem lies?
Is there a tutorial for makeing a flash panel in PS for flex 4 use flash builder 4.5?
Thanks

I don't know that much about PC's, but you need to open the browser and click on the preferences, I think in the same way as you would do with a Mac and click on select javascript.
Rather than Firefox, get them to download a copy of Safari for PC from the Apple site.
Other than this I am not really sure of a solution, other than telling them to buy a Mac instead!!

Business rules not showing up in Planning

hi guys,
we qare in the development stage.
i logged in to planning application and could not see the business rules in the tools
.could some one help me out on this....very urgent

Hi,
One thing to check for is that hbrserver.properties exists in file structure under the planning web application, e.g.
\Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning\WEB-INF\classes\HBRServer.properties
This example is for tomcat on 9.3.x
If the file doesn't exist there copy it from your AAS installation dir e.g. Hyperion\AnalyticAdministrationServices
Make sure you restart planning if you have to copy the file across
Cheers
John
http://john-goodwin.blogspot.com/

Panel interface horizontal ruler not showing in code

Similar Messages

Maybe you are looking for