Panel not visible in ps

today i created a panel in configurator and saved it successfully in plugins-panels. cs6 13.01.1 ,configurator downloaded today.
despite it is not visible in ps-extensions.
what did i wrong ?
thank you for helping me
best regards
wolfgang

thank you again, but all you tell me is what i did.
as well to start as administrator and to export it in plug-ins\panels.
no chance.
could it be a matter of the file-size or the number of commands?
thank you all, i found the mistake.
i exported it to the 32-bit version of ps and i am using the 64bit.

Similar Messages

Hyperlinks in Panel Not Visible

I've been working in Indesign CS6 for a couple of months. I have version 8.0 and am running OS 10.7.4.
Yesterday, I noticed that my hyperlinks panel was empty although I had created over 100 hyperlinks in that particular file. The hyperlinks were still there and when I exported the file to ePub, and the hyperlinks are still working, but I cannot see the hyperlinks in the panel. I quit Indesign, trashed my preferences (multiple times) but could not get my hyperlinks to appear. I thought perhaps it was a file issue; however, I opened over CS6 files I had worked on over the past few weeks that contained hyperlinks; same deal. No hyperlinks appeared in the panel. I created a new Indesign document and created a hyperlink; same deal, it does not appear in the hyperlinks panel.
Here's a snapshot of the panel in my file:
Here's a snapshot when I click on the arrows in the URL field:
You can see in the second image that my hyperlinks are indeed there. I can see them when I click on the URL field (I think because I set them up as shared), but they do not show up in my panel.
I thought trashing preferences would fix this, but it's not.
Any thoughts?
Thanks.

I have had an identical problem, but I think the problem is with the actual panel rather than any preferences. What I had done was move the split between the hyperlinks and the cross-references panels, down to the bottom, hoping to make the cross-references panel hidden, but I ended up with just a cross-references panel only, and the hyperlinks invisible, and I can't find anything to slide it back again.
Even if I close and reopen the hyperlinks windows, I still can't get to the hyperlinks I've created.

Xcesius properties panel not visible

Hi Experts,
I have a very basic question. I have been working on Xcelsius for quite some time and I have suddenly noticed that the properties panel in my xcelsius has disappeared. I have not made any upgrades.
In the 'View' menu, I have the option 'Properties' checked. Is there anything else that I need to take care of.
Thanks,
Sreeni

Check the size of the Properties window , I think u might reduse the size of the Properties window.

Guided Edit (Right hand side panel not visible

The Guided Edit, the right side panel of editing choices is not showing on my Mac.
I have tried uninstall and then re-install, but still have the same problem.
Any help ??

How did you uninstall it?

Library panel not visible

Captivate v5.5
One of my people is unable to see their library when working in Captivate v5.5.
They get the following message:
Can anyone suggest a fix for this please?
Noel

Before renaming the preference
Can you try resetting your workspace?
Also, verify is it missing or blank on other Projects or some particular one.
If you plan to rename the preferences : you will them here
C:\Users\current username\AppData\Local\Adobe\ you will find a fodler called Adobe Captivate 5.5, rename this folder.
Thanks!!

Process is not visible in BPM Workspace in Application panel 2

Hi dear developers,
I had a problem about BPM process. I was trying to implement this tutorial -> http://st-curriculum.oracle.com/obe/fmw/obpm/11g/r1/firstProcess/firstprocess_obpm11g.htm#t3
And all the steps had been done. But the deployment step, i couldn't see my process on the BPM Workspace. I searched the other opinions in the forum. It's completely same with this thread -> Process is not visible in BPM Workspace in Application panel
Nevertheless, couldn't find anything helpful. Could you help me please?
Thanks in advance.
Erdo

Hi Erdo
I hope you already ran the demo community seed app to create all the test users and groups etc in the default authenticator. If not, please see this below post:
Re: New to BPM: How to get the tasks in the Workspace
1. First login into bpm/workspace with domain adminstrator username/password. Then on right side, click on Adminstration link and see if you could see all the roles related to hello world app and also the users that you added to those roles.
One other very basic thing is, you should and must deploy the TaskForms project that has all the taskdetails UI pages. I hope you did this while deploying the workflow and checking the check boxes to deploy other ui projects also.
If seeding and getting demo uses is confusing, you can always use your own users. From weblogic console, create some extra users like weblogic1, weblogic2, weblogic3 etc with some password. Then use these users to assign to the roles from hello world app. Then login with these users. This will also work.
Thanks
Ravi Jegga

Content OF Panel Is Not Visible. Need Help

Hi Guys,
Can someone tell me why the contents of the "VisPanel" (JPanel) class is not showing up in the main window. I just don't understand why it is not visible after i add it to the main window.
Here is the code. You can test it. Only the button shows up. The contents of "VisPanel" class is not visible.
Replace the images in the "VisPanel" class with any image of your choice. I made them 130 X 130. I would have like to add the images in the post but i don't think it is possible to add images to post in this forum.
public class TilesImage extends JFrame{
     private static final long serialVersionUID = 1L;
     public TilesImage(){
            this.setLayout(new GridLayout(2,1));
            this.setSize(600,600);
            this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            VisPanel vis = new VisPanel();
            JPanel pana = new JPanel();
            pana.add(vis);
            BufferedImage sub = vis.getImg().getSubimage(261, 260, 129, 129);
           JButton but = new JButton(new ImageIcon(sub));
           pana.add(but);
           this.add(pana);
           this.setContentPane(pana);
           this.setVisible(true);
           repaint();
       public static void main( String[] args ) {
             new TilesImage();
             //new VisPanel();
class VisPanel extends JPanel{
      private static final int IMAGE_TYPE = BufferedImage.TYPE_INT_ARGB;
       private BufferedImage img;
      public VisPanel() {
             // here you should create a compatible BufferedImage
             //img = new BufferedImage( 450, 350, IMAGE_TYPE );
             img = new BufferedImage( 525, 500, IMAGE_TYPE );
                 this.setSize(img.getWidth(), img.getHeight());
             final int NB_TILES = 4;
             BufferedImage[] tiles = new BufferedImage[NB_TILES];
             tiles[0] = createHorizontalRail( new Color( 255, 255, 255 ) );
             tiles[1] = createVerticalRail( new Color( 255, 255, 255 ) );
             tiles[2] = createCrossing( new Color( 255,   0, 255 ) );
             final int[][] map = new int[][] {
                         {4, 4, 1},
                           {4, 4, 1},
                           {0, 0, 2},
                           {4, 4, 4},
             for (int i = 0; i < map[0].length; i++) {
                   BufferedImage tile = null;
                 for (int j = 0; j < map.length; j++) {
                      if(map[j] == 0){
               tile = tiles[0];
               for (int x = 0; x < tile.getWidth(); x++) {
          for (int y = 0; y < tile.getHeight(); y++) {
          img.setRGB( x + i * 130, y + j * 130, tile.getRGB(x,y) );
               //img.setRGB( x + i * 45, y + j * 32, tile.getRGB(x,y) );
          } if(map[j][i] == 1){
               tile = tiles[1];
               for (int x = 0; x < tile.getWidth(); x++) {
          for (int y = 0; y < tile.getHeight(); y++) {
          img.setRGB( x + i * 130, y + j * 130, tile.getRGB(x,y) );
          if(map[j][i] == 2){
               tile = tiles[2];
               for (int x = 0; x < tile.getWidth(); x++) {
          for (int y = 0; y < tile.getHeight(); y++) {
          img.setRGB( x + i * 130, y + j * 130, tile.getRGB(x,y) );
     this.setVisible( true );
     private BufferedImage createHorizontalRail( final Color c ) {
     final Random r = new Random();
     BufferedImage img = null;
     try {
     img = ImageIO.read(new File("images/crossingsHorizontal.JPG"));
     } catch (IOException e) {
     return img;
     private BufferedImage createVerticalRail( final Color c ) {
     final Random r = new Random();
     BufferedImage img = null;
     try {
     img = ImageIO.read(new File("images/crossingsVertical2.JPG"));
     } catch (IOException e) {
     return img;
     private BufferedImage createCrossing( final Color c ) {
     final Random r = new Random();
     BufferedImage img = null;
     try {
     img = ImageIO.read(new File("images/railCrossing2.JPG"));
     } catch (IOException e) {
     return img;
     public void paintComponent(Graphics g) {
     g.drawImage(img, 0, 0, null);
          public BufferedImage getImg() {
               return img;
          public void setImg(BufferedImage img) {
               this.img = img;
Thanks for your help.

kap wrote:
The "pana" panel must contain both the contents of the "VisPanel" panel and the button i created. So it is correct to set the contenPane to the "pana" panel. I tried to set the content pane to the "VisPanel" panel. It is visible but the button i added to the "pana" panel cannot be visible.
I hope you understand what i mean here.He understands exactly what you mean and has pointed out your mistake and offered a decent solution. I suggest you take his advice and set the layout of pana not the JFrame.

Cross References Not Visible in Panel

Hi all,
I have been enjoying the Cross References functionality in Indesign CS6 to use dynamic text that changes....until recently.
When i first started using them, the Cross References (CR) would be listed in the Hyperlinks/CR panel.
I can create a destination, create a hyperlink to that destination, change what it shows (I am using Paragraph Number) and it works as it should.
The problem i am having is that the CRs are not visible in the Cross Reference panel (the hyperlinks too for that matter)
This means i cant modify my cross references.
Does anyone know why they wouldnt show in the panel? Or is there any other way to see them?
I need to fix this. I have tried resetting the preferences as i found in other posts, but that didnt help

SOLVED!
The problem appeared to be with my Workspace profile. I changed from my personalised profile to "Interactive for PDF" ( which has the Hyperlinks panel) and it worked. All the Hyperlinks and cross-references show.
I personalised my workspace again with the panels i require and then saved a new workspace with the same name. All works fine after saving a new profile. I am going to take a backup of the workspace file so i can restore it easily if it happens again.

Semitransparent Panel & jComponent not visible

Problem:jButton is not visible & CockPitPanel should be semitransparent import java.awt.Color;
import java.awt.GraphicsEnvironment;
import java.awt.*;
import javax.swing.*;
import javax.swing.JFrame;
public class RBStrategy implements Runnable
     private JFrame frame;
     static boolean onlyScreen = true;
     static Screen screen;
     static AircraftCockPit aircraftCockPit;
     public RBStrategy(JFrame frame, Screen screen)
          this.frame = frame;
          this.screen = screen;
     public static void main(String[] args)
          JFrame frame = new JFrame();
          screen = new Screen();
          frame.setUndecorated(true);
          frame.getContentPane().add(screen);
          GraphicsEnvironment.getLocalGraphicsEnvironment().
               getDefaultScreenDevice().setFullScreenWindow(frame);
          screen.setLayout(null);
          aircraftCockPit = new AircraftCockPit(screen);
          new RBStrategy(frame, screen).run();
     public void run()
          do
               String output;
               try
                    Thread.sleep(1000);
               catch (InterruptedException ie)
                    ie.printStackTrace(System.err);
          while (true);
class Screen
     extends JPanel
     implements
          Runnable {
               boolean progressing = true;
               Thread t;
               Screen()     {
                    this.add(new JButton("ButtonScreen"));
                    this.setBackground(Color.BLACK);
                    this.start();
             public void stop()     {
                  progressing = false;
                  t.stop();
             public void start()     {
                  progressing = true;
                  t = new Thread(this);
                  t.start();
             protected void paintComponent(Graphics g)     {
                       super.paintComponent(g);
                       g.setColor(Color.red);
                       for(int i=0;i<this.getHeight();i=i+10)     {
                                 g.drawLine(0,i,this.getWidth(),i);
               public void run()     {
                    try     {
                         while(progressing)     {
                              this.repaint();
                              Thread.sleep(1);
                    }catch     (InterruptedException e)     {
                         System.out.println("Interrupted");
class AircraftCockPit
     extends JPanel
     implements Runnable {
          boolean progressing=true;
          Thread t;
          JButton jButton;
          Screen screen;
          AircraftCockPit(Screen s)     {
               screen = s;
               jButton=new JButton("ButtonCockPit");
               jButton.setBounds(30,30,40,40);
               this.setBackground(Color.GRAY);
               this.setBounds(s.getWidth()*3/4,s.getHeight()>>2,s.getWidth()>>2,s.getHeight()*9/20);
               s.add(this);
               this.start();
          public void stop()     {
               progressing = false;
               t.stop();
          public void start()     {
               progressing = true;
               t = new Thread(this);
               t.start();
          protected void paintComponent(Graphics g)     {
                    super.paintComponent(g);
          public void run()     {
               try     {
                    while(progressing)     {
                         this.repaint();
                         Thread.sleep(2);
               }catch     (InterruptedException e)     {
                    System.out.println("Interrupted");
}

As I suggested in your last posting, the size of the Screen panel is (0, 0). Since the size of the AircraftCockpit is based on the size of the Screen it is also (0, 0). So there is nothing to paint.
Did you add a few System.out.println(...) statements to verify this?

Publising front panels of not visible subvis on the web

High
my main program has tab object with 10 pages. Within the main program there are several subvis whose front panels i want to publish on the web.
The front panels of these subvis are not visible in the main program. Front panels of some subvis are displayed correctly in browser (IE, Firefox) but some not.
Fields of the object are empty or their fields are not refresh with new data (att. pict " array indicators").
The problem is worse if not visible subvi contains chart object. In the browser window data are moved out of the chart window (att. pict. "chart within...").
For monitoring front panels of the subvis i use MONITOR mode of the LabVIEW web server.
Any idea, hints or simple example is welcome.
Thanks and regards
Trajan
Attachments:
chart within the browser2.jpg ‏16 KB
three array indicators2.jpg ‏5 KB

Duplicate post!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

I am getting complaints from links that Firefox is already running and needs to be closed when it is not visibly running. But, I do find it as a process that IS running. What gives?

I click on a link in an E-mail. It complains that Firefox is already running and I must close it. Firefox is NOT visibly running. I check via Task Manager to verify. I find Firefox is running as a process. I kill the process and then can proceed. I did use Firefox earlier and closed it.

Make sure that you do not start Firefox with the -no-remote switch or have set the environment variable MOZ_NO_REMOTE=1 (Control Panel > System > Advanced > Environment variables).
If you need to have more than one profile open at the same time then start subsequent instances with the -no-remote command line switch.<br />
You can send links from other programs to a Firefox instance that is started with -no-remote, you need to drag links in a Firefox window in such cases.
See http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

Key focus is not visible for all objects when tabbing

I'm using LabView 5.1.
The key focus is not visible for all objects when tabbing through a "disabled and grayed-out" object.
For example, let's say I create a panel with 3 buttons. If I create a "disabled" attribute for button 2 and assign the value "2" (disabled and grayed-out) to it. When I will run this VI, the key navigation will go through button 1 and button 3 (skipping button 2 as expected) but the key focus on button 3 will not be visible.
Is this a bug with LabView or am I doing something wrong ?

Hi Ben,
Don't worry, time is not an issue... I'm posting an example of a VI with the problem I described. I noticed that the problem occurs only with "dialog buttons".
When you have time, let me know if you see the same behavior. If you do, I will report the problem to National Instrument.
Thanks for your time !
BigBen
Attachments:
3buttons.vi ‏22 KB

Cd rom is not visible

hi, my cd rom is not visible and the pc does not recognise any cd i put in.
i have tried device manager and it says cd rom drivers are installed and working.
i have reinstalled windows 7 and it has made no difference.
hope someone out there can help.
i have a hp g72 laptop
cheers bertie

Hy Dear!!!
I am not any HP rep, but I think I can help you, Try this
Right Click on COMPUTER
Device Manager> DISK MANAGEMENT
Here is the Pictorial Help
Open DISK MANAGEMENT
- Right Click on CD ROM in RIGHT PANEL as shown,
- Click Change Drive Letter and Paths
- Now Click Add button and Assign the Drive Letter you want to and then Click OK as Shown
I hope this will help you out.
Regards
WAQAR AHMED KAMBOH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Regards
WAQAR AHMED KAMBOH
Please click on the KUDOS BUTTON on the left of this post as a sign of THANKS GIVING
Please click on ACCEPT AS SOLUTION if your problem Solved.

Radiobuttons not visible in firefox using h:selectoneradio

Hi ,
We are facing certain issues regarding rendering radio buttons in firefox.
It works fine in IE but doesnot work in Firefox
Please find the below block of code.
In the code shown below,there are two panels for displaying radio buttons.
Last piece of code which displays commandlink is visible ,but the radiobuttons which needs to be shown on pageload is not visible.
When we click on commandlink , the flag showMoreValues turns true and only on click of this link the radiobuttons in second part of the code is visible.
Can you please help me out regarding this issue?
<a4j:form id="subscriptionForm"
                                   ajaxSubmit="true">
                         <f:loadBundle basename="dk.tdc.resources.Messages" var="msgs" />
                                   <h:panelGrid columns="1">
                                        <h:panelGroup rendered="#{subscriptionCard.showValues}"
                                             id="ValuesList">
                                             <h:panelGrid columns="4"
                                                  columnClasses="address_col1,address_col1,address_col1,address_col1">
                                                       <c:forEach var="privateProducts" items="#{subscriptionCard.Values}">
                                                            <h:selectOneRadio id="#{privateProducts.description}"
                                                                 valueChangeListener="#{subscriptionCard.productChanged}"
                                                                 value="#{subscriptionCard.selectedProductCode}">
                                                                 <a4j:support event="onclick"
                                                                      reRender="convertingForm,privateParamCard,businessParamCard,errorDetailsSubs,facilitiesCard,numberSelectCard,npPanel,paymentFormCard" />
                                                                      <f:selectItem itemLabel="#{privateProducts.label}"     itemValue="#{privateProducts.value}" />
                                                            </h:selectOneRadio>
                                                       </c:forEach>
                                             </h:panelGrid>
                                        </h:panelGroup>
                                        <h:panelGroup rendered="#{subscriptionCard.showMoreValues}"
                                             id="moreValues">
                                             <h:panelGrid columns="4"
                                                  columnClasses="address_col1,address_col1,address_col1,address_col1">
                                                       <c:forEach var="privateAllProducts"
                                                            items="#{subscriptionCard.showMoreValues}">
                                                            <h:panelGroup>
                                                                 <h:selectOneRadio id="#{privateAllProducts.description}"
                                                                      valueChangeListener="#{subscriptionCard.productChanged}" value="#{subscriptionCard.selectedProductCode}">
                                                                      <a4j:support event="onclick"
                                                                           reRender="convertingForm,privateParamCard,businessParamCard,errorDetailsSubs,facilitiesCard,numberSelectCard,npPanel,paymentFormCard" />
                                                                      <f:selectItem itemLabel="#{privateAllProducts.label}"
                                                                           itemValue="#{privateAllProducts.value}" />
                                                                 </h:selectOneRadio>
                                                            </h:panelGroup>
                                                       </c:forEach>
                                             </h:panelGrid>
                                        </h:panelGroup>
<h:panelGroup style="float:right;"
                                             rendered="#{subscriptionCard.showValues}">
                                             <h:panelGroup style="float:right;"
                                                  rendered="#{subscriptionCard.ValuesLinkVisible}">
                                                  <a4j:commandLink id="index"
                                                       action="#{subscriptionCard.retrieveMoreValuess}"
                                                       reRender="moreValues"
                                                       value="#{msgs.subscriptioncard_link_more_Values}"></a4j:commandLink>
                                             </h:panelGroup>
                                        </h:panelGroup>

You should probably install Firebug into your Firefox browser. That might help isolate the problem. Also, there's been a recent update to Firefox. Have you installed it? If not, I'd recommend doing that next.
If that doesn't solve it, try removing the components form the page, then adding them back one at a time. You might have a small syntax error on the page that's difficult to see when it's filled with code. Some browsers cope with syntax problems better than others, so what works fine in one browser might not work at all in another.

Trip Schema is not visible in FITVFELD_WEB

Hi,
When I made some changes in the Trip schema 01 for country Germany and saved, the trip schema is not visible in the left hand panel at all. But when I try to copy 99 to 01, it says '01' already exists. This means the trip schema 01 is available and not visible in transaction FITVFELD_WEB.
Appreciate if anyone suggest to make this visible to make further changes.
Regards,
Kumar

Narayana,
It is displayed the trip schema 01 in the table T706S and V_T706S and transaction FITVFELD.
But it is invisible in the trasaction FITVFELD_WEB.
Thanks.
Kumar

Panel not visible in ps

Similar Messages

Maybe you are looking for