Panel Tab issue with mandatory fields

So i have a requirement where i have Jsff page with paneltab and 2 showdetail, on one show detail i further ave panel tab with 5 show detail.
when i commit data on one tab its asking for other tab Mandatory fields and commitng the all tab data.
I did immediated=true on all tab, but it didnt help.
Can someone please help me onthis.
Thnks
RJ

Jaspal
Correct i have two level of tabs
Tab1 Tab2
under tab 2
Tab21,Tab22,Tab23,Tab24,Tab25
Tab21-tab25 have there own Taskflows which used differnt VO(based on diff EO) and 1-2 tab will have Trasient VO
So Tab 1 has Updatable VO with some mandatory Fields. When i come to screen i saw two tabs Tab1 and Tab2
I clcik on Tab 2 i saw Tab 21-25...When i commit some data on Tab21, its asking for mandatory fields of Tab1
I hope i am clear..let me know if you need some other info
Thanks for help
RJ

Similar Messages

Tab canvas with required fields (problem)

hi,
I am using tab canvas with 5 tabs with diff blocks.
receive
issue
adjust
return
view
some fields are required in all tabs.
when i run the form and in RETURN TAB and enter some data and click the save button the cursor goes to receive tab and focus the required fields with a message
FIELD MUST BE ENTER
same for issue tab also...
i dont want to enter any thing there ..
how i manage it
thanks

Not sure if I understand you correctly. You say some fields are required in all tabs, but also that you 'don't want to enter anything here'. Do you mean that the fields are required, but only if you're entering data on that specific tab? I.e. you don't have to enter all of the tabs.
If that's the case, are all the tabs based on the same block, or different blocks?

Issue with dropdown fields

Hello All,
I have following issue with Complaints application.
Issue - We have done some enhancement using EEWB and added some fields on 'Products' tab under complaints. After that we have made some of those fields as dropdown fields in the corresponding 'Field Group'.
My problem is now I can see those dropdowns in line display under 'Products' tab but when I switch to Form view I don't see those dropdown for the corresponding fields, instead those fields appear as input text fields.
One more thing is some of the fields I can't see in the line view (Item, Product ..) which I see in form view.
Any help would be highly appriciated.
Thanks.
Amit Kade

Hi Fausto,
According to your description, my understanding is that the drop-down list boxes of the lookup column became wide when using IE 9 or 10.
Did you customize the list form in InfoPath?
Per my test, the width of the drop-down list boxes can be customized in InfoPath.
I tested in my environment, and the lookup column worked fine in IE 9 or 10.
I recommend to add the SharePoint site to Compatibility View in IE to see if the issue still occurs.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Issue with custom fields mapping from CRM to ECC.

Hi all,
I have issues with replicating custom fields in a Service order. I have created new fields with EEWB and EEWC. Now the structure has been changed in ECC and CRM. But i have to map this fields to correct structures. Also i need some logic to apply.
But i have addressed in couple of threads about the custom function module as in user exit for FI generation.
But i didnt understand the concept of this custom function module. why is this been used?
Could anyone let me know with an good example on how this has to be acheived.
Points are highly awarded.
Kindly reply me.
Thanks,
Kiran...

Hi,
Here you go,
After you create custom characteristics.
1. Do Assign category.
2. Map contents.
3. Double check your master catalog has the mapped content.
4. Publish master catalog.
As per your message, you are not having any error message during import, which tells me that you are one step to close.
Cheers, Renga

Issue with input field in table control

Hi,
I have an issue with field acgl_item-rstgr in the table control.
I have created a screen program with a table control.
In the control i have added a dictionary field as acgl_item-rstgr.
When i execute, do f4 on the input field, select a value and press enter, then it is showing me
error as 'Entry 'val' does not exist in T053R (check entry). Its really weird to understand this. I have selected the value
from f4 and even then it says this. Its working for all other columns, but not working only for RSTGR.
Plz help me on this regard.
Code is like this.
TYPES : BEGIN OF ty_rstgr,
rstgr TYPE RSTGR,
END OF ty_rstgr.
TABLES : ACGL_ITEM.
DATA : it_rstgr TYPE TABLE OF ty_rstgr.
DATA : wa_rstgr TYPE ty_rstgr.
CONTROLS : table TYPE TABLEVIEW USING SCREEN 100.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT it_rstgr INTO wa_rstgr WITH CONTROL TABLE.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
LOOP AT it_rstgr.
ENDLOOP.
Thanks,

Hi Navitha,
Its Check Table concepts for the error u stated. Please check wht the Search help ur using...Because for this field there is no search help at value table level...Use search help that hold all master data or create a custom search field in SE11 level or in program level.
Cheers,
Naveen

Radio buttons in dynpro with mandatory field

I have two radio buttons in a group and a field that should be mandatory when one (the first one) is checked.
So when the other is checked it should not be mandatory.
The problem is that when I check the second the field is mandatory until I have put something in the field. In that moment, the field is not mandatory. What I want is to make the field not mandatory when the second is checked so the status of the field was changed to not required in that moment not when I put something in it.
Thank you

Hi Maria,
I think you have two possibility.
One is to check the "mandatory field" by programming and not with the attribute in the dynpro.
The second way is making a loop at screen in the PBO and depend on with radio button is checked modify the required field of screen table for the field of your interest .
I hope this can help you.
bye
enzo

Default Back Button ( F3 ) with mandatory fields ( module pool program )

Guys,
I'm editing another persons dialog program and as mentioned in the subject line, there are mandatory fields. WIthout them being filled, I cannot use the back button to exit the program as it prompts me to first fill the mandatory fields.
How can I get past this?
I did a /h for debug mode and pressed Back but it did not even show the debugger.
Regards,
Kevin

<b>Use AT exit-command.</b>
MODULE mod [ AT {EXIT-COMMAND|CURSOR-SELECTION} ]
[ ON {CHAIN-INPUT|CHAIN-REQUEST} ]
[ SWITCH switch ].
Extras:
1. ... AT EXIT-COMMAND
Effect
The statement MODULE of the dynpro flow logic calls the dialog module mod of the ABAP program. You can use MODULE either as a keyword or as an addition of statement FIELD. When using it as an addition, the call of the dialog module depends on conditions for the screen fields.
As a keyword, the statement calls the dialog module mod of the respective ABAP program. At the event PAI, you can use the additions AT and ON to specify conditions for the call of the dialog module.
At the event PBO, you can call any dialog module defined in the ABAP program with the addition OUTPUT. At the events PAI, POH and POV, you can call any dialog module defined with the addition INPUT or without any addition. If the dialog module mod does not exist in the ABAP program, an untreatable exception is triggered. After processing a dialog module in the ABAP program, processing of the dynpro flow logic is resumed after the position of the call, unless the screen processing is completed within the dialog module.
You can use MODULE as a keyword only at the events PBO and PAI. At the events POH and POV, you can use MODULE only as an addition to the FIELD statement.
Note
Do not mix up the MODULE statement of the dynpro flow logic with the identically called statement MODULE for defining dialog modules in the ABAP program.
Addition 1
... AT EXIT-COMMAND
Effect
Addition AT EXIT-COMMAND at the event PAI causes module mod to be called exactly if:
The function used to trigger event PAI has function type "E"
Into the input field of the standard toolbar, the user entered a character string starting with "E" and confirmed it using ENTER.
The dialog module is called before the automatic input checks defined in the system or in the ABAP Dictionary and independent of its position in the event block. The only screen field transported to the ABAP program is the OK field. If the function that triggered the PAI event does not fulfill any of the above prerequisites, the MODULE statement is not executed.
If several MODULE statements have the AT EXIT COMMAND addition, only the first one is executed. If no MODULE statement has the addition AT EXIT COMMAND, a normal PAI processing is executed: The predefined input checks are executed and then the PAI event block is processed sequentially. Provided the screen processing is not terminated in the dialog module mod, after the return from the dialog module, the complete PAI processing is executed. You must not use the addition AT EXIT COMMAND in connection with the statement FIELD.
Note
The function type of a function is determined in the Screen Painter or Menu Painter. Usually those functions of the user interface are defined with function type "E" that are assigned to the icons Back, Exit and Cancel in the standard toolbar of the GUI status. Therefore, the called dialog module should terminate the screen processing and allow security checks, if required.

Sharepoint 2010 Content Deployemnt Job issue with duplicate fields in User information List

Hi friends,
I am facing below issue with the content deployment job.
It was working earlier. But now since from couple of days all the content deployment jobs in production environment are failing with below error.
Field name already exists. The name used for this field is already used by another field in the list. Select another name and try again.
ObjectName="User Information List".
When I check the fields in User information list in targeted site, I found couple of columns are dupicate like "ask me about",first name","Last name" etc.
Do i Need to drop target site collection or recreate with fresh content deployment job.
Please suggest.
Please help .
Regards
Subrat

Hi,
According to your post, my understanding is that you got duplicate field error.
Based on the error message, you can try to use the following code sample to remove duplicate records, and check whether it works:
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneralprevious/thread/41ee04bd-91fb-4bf9-932a-bac42c56c357
Here is a similar issue, you can also use the ‘RemoveDuplicateColumn64’ provided:
http://sharepointsurfer.wordpress.com/2012/04/27/how-to-fix-publishing-site-content-deployment-error-duplicate-first-name-column/
What’s more, as you had said, you can recreate a site with a fresh deployment job.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Issue with Region field in BW report

Hi experts,
I am facing an issue with BW Report ,the data for REGION for some billing doc no are showing as # and its description is not assigned.Also there is no data for region in its data target as well and also no data in VBRK table for those billing doc no in R3 side.
Can you please suggest some solution.
Thanks for help in advance.
Regards
NP

Hello -
If there is no data for charecteristic values,. # and not assigned will be dispalyed in the report.
Its BW funcnality,.
If you would like to remove the # values in BEX you have to go for a Macro,.
If in WAD you have to eliminate the first values in the repactive web item.
Regards,
Vishwa.

CS5 issues with mandatory roaming profiles

Hi,
I have seen lots of problems reported with using CS5 on networks with mandatory roaming profiles but not found any answers yet?
Has anyone managed to get it working yet?
We have gone to using standard network default profiles but it is not where we really want to be.
Regards
Darren

Dreamweaver is designed to work in a multi-user environment, and it creates a configuration folder for each user in that person's application data folder or library. You need to contact Adobe technical support if you need a different setup.

How to validate incoming messages with mandatory field coming as null/empty

Hi,
I want to validate the incoming messages received by the file adpater.
1. Need to check that all the mandatory fields(minoccurs=1) has values, else it should return fault. But what happening now is even though the mandatory fields are empty/null, file is being read by the file adapter and not getting faulted.
2. I have tried using the Validate Activity/Assign Activity but this is a business fault and not sytem fault, hence no faults are auto generated.
3. We are presently using the if/switch activity and putting the conditions manually in order to validate the mandatory fields and hence it is throwing the business faults explicitly.
4. But if there is 200 fields mandatory out of 500 fields schema, then we need to hardocde manually all 200 fields. Please advise me if this is possible in any dynamic way.
Thanks
Edited by: 902781 on 15.mar.2012 07:33

Dear vijay,
This is my xsd::
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.example.org"
targetNamespace="http://www.example.org"
elementFormDefault="qualified">
<xsd:element name="exampleElement">
<xsd:annotation>
<xsd:documentation>
A sample element
</xsd:documentation>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
*<xsd:element name="element1" type="xsd:string" minOccurs="0"*
nillable="false"/>
*<xsd:element name="element2" type="xsd:int" minOccurs="0"*
nillable="false"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
I tried the above xsd as well as
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.example.org"
targetNamespace="http://www.example.org"
elementFormDefault="qualified">
<xsd:element name="exampleElement">
<xsd:annotation>
<xsd:documentation>
A sample element
</xsd:documentation>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
*<xsd:element name="element1" type="xsd:string" minOccurs="1"*
nillable="false"/>
*<xsd:element name="element2" type="xsd:int" minOccurs="1"*
nillable="false"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
But instance is getting completed even though the mandatory string field(element 1) is empty/null like:
<element1></element1>
What I feel is, string will accept all the values whether it is int, date, long and in the same way it is accepting null character.
Please let me know if you have any solutions to overcome this.
Thanks again.

Create BP with mandatory fields ( BAPI )

Hi All,
How can I create BPs with minimum number of fields.
please refer..
Create BP with minimum fields ( BAPI )
Thanks in Advance, Sudeep..

Hi All,
How can I create BPs with minimum number of fields.
please refer..
Create BP with minimum fields ( BAPI )
Thanks in Advance, Sudeep..

BEX WAD 7.0 Tab Pages issue with Mandatory Variables

Hello,
I have developed a BEX WAD 7.0 Tab Pages and need to pass Mandatory variables from one tab to other tab. Each tab has Container Layout Item to group them into a tab.
I have Set the Variable Sate for each tab page generically and it passes the variables if all of them are optional variables. If one of them is Mandatory the doesn't pass the value for the variable.
Did anybody face this problem & We are on SAPKW70018? If there are not note specifically for this on higher SP please do let me know.
Thanks
Arun

I guess there are no experts in BEX WAD 7.0 in SDN to answer this question.
Thanks
Arun

Issue with the field (Trading Partner) in the BW report

The Info Object 0PCOMPANY (Trading Partner) is having a reference char 0COMPANY in the BW system so the data for the field Trading partner text will be pulled from 0COMPANY_TEXT data source.
I have checked in the info object 0PCOMPANY in the tab master data / Text under text table properties it has checked in the medium length text exists.
Even i have checked with R/3 consultants and found the data for all of trading partners but i am not clear where i have to investigate on this issue.
Now the values for the field Trading Partner were not displayed in the report i have checked the properties of the field and found display as Standard: key and text.
Any help will be appreciated in advance.
Thanks
Ganni

Hi,
set the propety "display" to medium text for this charateristic either in the BEx report itself either in the query definition.
Ensure that the text are well loaded (run tran RSDMD with this IObj in norder to display master data)
Only having meduim texts will prevent you to display "key and texts" in reports.
You could enhance your IObj and enable short/long texts as well; in the transfer rules just load the medium text in short (truncate its length to 20) as well as in the long text.
hope this helps...
Olivier.

Form validation error with mandatory fields and signature field

Hello,
I have seen that many other users are facing this issue, and they partialy do solve it with some workarounds. However, none of them applies to my case.
I have a dynamic form (can be registration form for example) where user fills in bunch of fields. Some of them are mandatory.
When user signs the form, I get our favourite validation error popups that filed this and this did not validate. (I think that the signature is not valid too once I get these errors).
Workaround would be to set all fileds in the form as optional, however, the presign and postsign events work only in A9 and I need the form to be compatible with ver. 8 too.
I also need to make sure, that they are not set to optional, if the signing fails, user clicks on cancel etc...
Any ideas how to acomplish such a scenario?
Thanks
J.

solved by myself.
You have to install and configure the reader rights credentials mentioned in note 736902

Panel Tab issue with mandatory fields

Similar Messages

Maybe you are looking for