Panels in 1.1, question for XP userss...
I only have time for a few posts to this board as I long to have the time to install 1.1. But I am too busy at the moment. So I just have a simple question?
In 1.0 if you adjust the width of the panels and than close down, the next time you open LR the panels went back to default size. I so far have seen nothing about this in 1.1 (I read the read me already)
Can any body tell me, do the panels now keep their user set width between sessions?
Thanks
Woo Whoo! Thanks DW
Similar Messages
-
Panel collection with auto height for different screen resolution
Hi.
I created a page using panel collection by default height for 1024 * 768 screen resolution and works fine. When I change the screen resolution to 1152 * 864 then my page layout changes as I can see lot more space at bottom due to fixed height define for panel collection.
Here my question is how to make height as dynamic for panel collection which can changed based on screen resolution. Usually percentage for height attribute resolve the issue but JDev 11.1.1.4.0 doesn't support percentage its allows only pixel or em.
Please let me know to resolve this issue.
ThanksIf you want a table to occupy 80% of the height of the screen you should be able to do this with assigining % to the various panelStretch facets - like this:
<af:form id="f1">
<af:panelStretchLayout id="psl1" topHeight="10%" bottomHeight="10%">
<f:facet name="bottom">
<af:spacer width="10" height="1" id="s2"/>
</f:facet>
<f:facet name="center">
<af:panelCollection id="pc1">
<f:facet name="menus"/>
<f:facet name="toolbar"/>
<f:facet name="statusbar"/>
<af:table var="row" rowBandingInterval="0" id="t1">
<af:column sortable="false" headerText="col4" id="c1">
<af:outputText value="#{row.col4}" id="ot1"/>
</af:column>
<af:column sortable="false" headerText="col5" id="c2">
<af:outputText value="#{row.col5}" id="ot2"/>
</af:column>
</af:table>
</af:panelCollection>
</f:facet>
<f:facet name="start"/>
<f:facet name="end"/>
<f:facet name="top">
<af:spacer width="10" height="1" id="s1"/>
</f:facet>
</af:panelStretchLayout>
</af:form> -
TOP questions for Eseries devices - not so new!
Just noticed that the thread titled:
TOP questions for Eseries devices - start here [new]
Really isn't so new dated 30-Cot-2007 11:48 AM - last edited on 30-Oct-2007 11:48 AM
The post suggests that the first thing to do is update to the latest version of software.
Alas the last update for E72 was 27 October 2010 which is flawed! I know as my phone has misbehaved since installing it and I see other users reporting similar if not the same issues here.
*#0000# reports version 052.005.217.11
Question - How does one down grade to previous version?
The post then suggests "If you still experience problems, you can try if formatting your Eseries device helps. Format the device by dialling *#7370#. The device will request a security code, the default code is 12345 unless you have changed it."
Well actually on the E72 this does nothing! I Type in *#7370# and its displayed to me and nothing else happens. If I enter *#0000# I get the version number so it seems the software/firmware does not understand the code above!
I did try 'factory settings' option from one of the control panel menu's instead at some point of my misery but was surprised by just how little effect that had - many things were not reset.
If your still reading, I thought I would share some steps I have found to sometimes help on E72 when it appears to hang / stall:
1. Try holding down the home button and if the running applications bar is shown try closing the applications by pressing the delete (backspace) key.
2.- If that fails try pressing the off button and selecting 'offline' mode - This sometimes works - if it does then try previous point before going back to an online mode such as 'general'.
3. If that fails - try holding down the power button to turn device off - that sometimes works! But sometimes the keyboard lights simply stay on until the battery goes dead...
4. Remove the battery wait a moment and then re-insert battery. You may then have to enter the time and date. Do check your alarms - during GMT I noticed all my alarms would have incremented by an hour! Not seen this since BST started.Very strange - or perhaps not that strange but just another issue.... I tried the Hard Reset code again at this time it worked!!! I'm now re-entering my details and remembering what I didn't back up But if it fixes my issues it will be worth it.
FYI from another fine post I found:
FOR SOFT-RESET:
- at Standby Screen type-in => *#7780#
It will ask for “Restore all phone settings-phone’ll restart….”
Then it asks for security code enter factory default => 12345
FOR HARD-RESET:
- at Standby Screen type-in => *#7370#
It will ask for “Restore all phone settings-phone’ll restart….”
Then it asks for security code enter factory default => 12345
FOR FLASHING- TOTAL RESTORE: (Do this if your phone does not boot up)
1) Remove the battery, and then wait for about 20 min or so before putting it back
2) Press and hold these three keys together -Green dial key, Star key[*], Three key [3]
3) switch ON the phone.
4) Do not let go the three keys until you see the WELCOME screen displayed and just let it complete the boot process
if this doesnt help contact Nokia Care Point-> http://europe.nokia.com/A4388379 -
New Sequence Question - for slow motion video
Hi,
I'm a very new user of Premier. I've recently had issues with choppy playback of my preview videos. After much research I believe the issue was down to two things. Firstly my sequence did not match my input clip, I had it set to my desired output. Secondly, I was editing video across my network, rather than bringing it locally to my PC. I've fixed the latter issue by copying video files to my local machine and then moving them back onto the network once I've finished editing.
The advice out there essentially seems to be to match your sequence to your primary input video. I've done that and it helps. However, it's raised a big question for me. My input video is from a GoPro and is at 1080p 50fps. I ultimately want my output video to be slowed down to 25fps (resulting in a constant slow motion effect throughout the entire sequence).
If my sequence settings are set to match the input clip (50fps) and I slow the video down by 50%, will that result in an unsmooth video? My basic understanding is that if I slow 50fps video down by 50% then Premier will have to double the amount of frames. Where as previously, if I slowed it down by 50% Premier had enough frames to play with as the output video was 25fps.
Hopefully my question makes sense! Any advice on what the best approach is? Or is this a complete non-issue when it comes to exporting the video (providing I export to a 25fps formart)?
Thanks,I think you said it OK, you are just missing the right words to do what you want. Let's walk through this for you, and for others that might read it later.
If you take a 50 frame per second video and put it into a sequence created from it, then slow it down 50% it doubles up each frame to achieve slow motion. Not what you want.
If you take a 50 frame per second video and put it into a 25 fps sequence, it drops half the frames to play at normal speed. Not what you want.
What you want to do is interpret the 50 fps video to 25 fps, then drop it into a 25 fps sequence. Each frame will play at 25 fps and generally be smooth as silk.
I don't have any 50 fps clips handy, but here are examples of taking 60 fps to 30 fps. (Excuse the idiot way that we Americans do things. Our 30 is actually 29.97 etc)
First, right click on the clip in the Project Panel, select Modify, and Interpret Footage. Then change the 50 to 25 - similar to this image: -
How can you change your security question for I tunes?
How can you change your security question for I tunes?
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use -
I have an apple id and it has my current email attached to it. however when i go to update apps it's asking for the password for an old email. I no longer have the old email and can't use it. when I go to icloud on my ipad it asks for the password for old email. it doesn't allow me to change the old email to current. when i go to reset it i can't remember the password or security questions for the old email so it doesn't let me go any further. How do I fix this? Do i need to call apple support?
I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option? -
I have recently bought an IPAD 2 for my girlfriend and have encountered a problem with purchasing apps through my itunes account. It is requesting that I not only enter my pasword (which I know) but answer my old account questions, which I have forgotten the answers to. It had since locked me out of changing my questions for eight hours. Is there any number I can call to prove that I am the real owner of my itunes account so my girlfriend will be able to use her ipad to purchase new apps without having to go through the trouble of using one of my other apple devices? Random information: I believe my questions were set back in 2007 when I purchased my first ipod nano, since then I have used this same itunes account for my own ipod touch and ipad 2 and my girlfriends iphone 1st generation. I have never run into a problem regarding my questions before on any of these devices
http://www.apple.com/support/itunes/contact/
-
Can somebody give some real time questions for alv report
hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
Using ALV, we can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
<b>Reward useful points</b>
Siva -
Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.
-
I seem to not enter the correct answers to my security questions for itunes to buy an in-app purchase and also cannot answer the questions exactly like i answered them when creating the account for my ipod, how do i find out what answers i put for my ipod touch and itunes?
Try these previous discusssions:
recover answers to security questions: Apple Support Communities
how do i change apple ID security...: Apple Support Communities -
I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file can anyone tell me why its not working?
1) Apple ID: All about Apple ID security questions
Torrifromny wrote:
I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file ?
2) See Here. Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
3) Or Email Here > Apple Support iTunes Store Contact -
I can't reterive sequerity question for my apple id
i can't reterive sequerity questions for my apple id
<Email Edited by Host>You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97539) -
Can anyone help or answer this question for me. Is there a way to have a private album for pictures sent to my phone? Don't exactly want kids ( niece and nephew ) to play on my phone and see private pictures of my girlfriend
What about this?
https://itunes.apple.com/ru/app/best-secret-folder/id488030828?l=en&mt=8 -
Please answer a programming question for an admin
I'm not a programmer (although my interest is growing), so I can't answer this question in a discussion regarding how Win32API w/OLE and COM is SO much better than programming for Unix/OS X applications.
The original discussion was in regards to OS X's superior Unix based security, he devolved to this. Having only begun my venture into programming, his questions are a little above my head at this point. I'm also interested (as an amature programmer), how this would be accomplished in OS X/Unix.
Thanks in advance.
Here's his position:
*(1st entry)*
I have unsed Windows and many flavors of Unix and I have written programs in Assembler, Fortran, Pascal, Cobol, RPG, Smalltak, Basic, PowerBuilder, Delphi, C, C++, C#, Java, and Perl, and I have been programming for over 20 years, so I do have extensive knowledge about programming.
So I have one question for you:
If you had to build a business application that has to allow users to, spell and grammer check, and perform financial calculations, and render the HTML, how would you compare the effort to do this in Windows versus that in Linux, AIX, Solaris or any other Unix operating system?
I can make this business application have these features in ONE DAY on Windows, because COM and OLE lets me, use Word to spell and grammer check, Excel to do the financial calculations, and IE to render the HTML!
I make my living building complex customized business software, and Windows allow me to build these applications by myself in weeks, when it would take me and a team of programmers months to do these same things in Unix because of the lack of an the Win32 API, COM, and OLE, or I would have to BUY third party libraries that did these things, and deal with the licensing, versioning, and vendor problems that go with them, and none of those third party librabries would be close to Word, Excel, and IE in CAPABILITY!
HONESTLY tell me and others reading this thread how you would go about create the customized business application I described above by yourself in a Unix instead of Windows, and tell us how many MONTHS or YEARS it would take you, or how you would have to BUY some other third party libraries to do what Word, Excel, and IE!
Anyone who thinks a Unix has more CAPABILITIES than Windows, has never used Win32API/COM/OLE/.Net, and does not build customized complex business software for a living, because we people that do are the reason that you find some much customized business desktop software for Windows, and so little for any Unix.
I have nothing against Unix, and it is great for simple business tasked server software, but for complex business tasked desktop software Windows with Win32API/COM/OLE/.Net wins hands down!
*(2nd Entry)*
A System administrators view of an operating system and an application developers view are entirely different, and the Win32API/COM/OLE/.NET simply make my job so much easier, and you simply don't understand because you do not have to deal with the "dirty' details of making what a user wants, which is why your definition of "integration" and mines are totally different!
With the spell check you talked about, how will you keep in in synch with the dictionary in Word where the user is constantly adding and removing words?
No, you would have the user to have to maintain two different spell check dictionaries, and you would totally ignore the grammer check requirement!
Cutting and pasting data between applications is simple integration, and not the complex type that I am talking about.
Can you make your application display and use the MacGourmet menus appear in its own window, and to access and use the MacGourmet functionality (ie. search for a recipe) in its own window?
Give me one example of a Unix application that can display the menus of another application, yet alone control its features!
Of course you can't, because you need COM and OLE!
I am quite familiar with different flavors of Unix, but those operating systems do not have the rich API and program integration features namely COM and OLE that Windows has, because it violates the Unix idea of security by process isolation!
Yes that idea of process isolation keeps the operating system safe from malicious code in applications and from one application taking the others down, but you lose the power of programs working together, and you simply cannot build the type of customized business applications that I build by myself, without reinventing the wheel over and over and without having a large team with lots of programmers.
For example, my customers and millions of others spend all day working in Word and Excel, and the Windows idea that I can transparently integrate my complex business applications right in Word and Excel menu, and into their templates and macros, is why third party developers like me prefer Windows over Unix, regardless of how much better security in Unix is.
Do not get me wrong, Java improves business application development on Unix, but unfortuantely it is not feasable to rewrite ever legacy application in Java, and Java does not integrate well with other programming languages.
I used to code business application for both IBM MVS and Sun Solaris, and I never want to go back to those "bad" old days again, once I took the time to learn how to PROPERLY code using Win32API/COM/OLE/.NET!At risk of feeding the troll I'll wander in here:
NOTE: Since this is an Apple programming boards and I have limited experience programming on traditional Unix systems (and most of that in college) I will confine my answers to the area I know.
If you had to build a business application that has to allow users to, spell and grammer check, and perform financial calculations, and render the HTML, how would you compare the effort to do this in Windows versus that in Linux, AIX, Solaris or any other Unix operating system?
I can make this business application have these features in ONE DAY on Windows, because COM and OLE lets me, use Word to spell and grammer check, Excel to do the financial calculations, and IE to render the HTML!
Note that this scenario assumes the user has Microsoft office installed. The person argues that they don't have to purchase libraries to program but what they are effectively doing is simply transferring that cost to user. I don't have to purchase libraries but everyone of my users needs to. Good for you, very good for Microsoft but bad for your customer - IMHO. OK, I know "But all Windows business users have Office installed already." When it comes free with the system then I'll retract my objection.
Under OS X and Cocoa many of these functions are intrinsic to the system layer and do not require any applications to be installed. Using Cocoa you can write a simple Word processor that has rulers, full font manipulation (including kerning, spacing and leading), Document Save and Load, Printing, Export to PDF as well as spell-checking in under 10 lines of actual code. Adding a custom file type and icon for full system integration will add another 5 minutes to your programing.
In case you think I'm blowing smoke here is a tutorial from 2002 (yes, this has been possible for over 5 years) outlining the 8 line Word Processor build in Cocoa. http://www.stone.com/TheCocoa_Files/What_s_sofunny.html
And yes, Cocoa also includes Webkit so I can add full HTML rendering by dragging in a WebKit window to my user interface. For an experienced Cocoa programmer this certainly sounds like less than a day of programming - in fact it sounds like a good tutorial for a middle-experienced training day or 2 day class in Cocoa.
I won't include the link to the 1 line web browser you can build in Cocoa using Webkit because it's shorter than the description. Feel free to search for it if you want to.
HONESTLY tell me and others reading this thread how you would go about create the customized business application I described above by yourself in a Unix instead of Windows, and tell us how many MONTHS or YEARS it would take you, or how you would have to BUY some other third party libraries to do what Word, Excel, and IE!
BUT this is all done from the stock system that is on every OS X computer not simply those with Office installed. Obviously you'd need to add some features that were more complicated than this - because any halfway decent programmer could turn this stuff out - and polish takes a while but to meet the requirements of the challenge it would take 2 days tops.
Is every *nix programming environment like this? I don't know I can only answer for the system that I have experience with and is the concern of this board. If you really have questions regarding *nix programming then I suggest you find an appropriate board and troll^H^H^H^H^H ask there.
If you're ever serious about programming on the Mac feel free to stop by and actually take a look at it. I think you'll be surprised.
=Tod -
A question for the rtexprvalue attribute of the tag
I'm using struts tag , and get some question for tag. In my jsp file. the code like this:
<html:hidden property="param1" value="<%=id%>otherwords"/>
note: I add some word after the express
when i run the jsp file, out of my thought, the result is :
<input type="hidden" name="param1" value="<%=id%>otherwords">I think the right result is:
I assign the id value is "2"
<input type="hidden" name="param1" value="2otherwords">but i erase the "otherwords" in the express, the result is right!!!
<input type="hidden" name="param1" value="2">not
<input type="hidden" name="param1" value="<%=id%>">What' the error?
Does the express must be closed in "<%=" and "%>"? Any titles mention it?
Many thanks.
Richard Jinnot sure why it wont work, but I think this will work
<html:hidden property="param1"><%=id%>otherwords</html:hidden>
Maybe you are looking for
-
Error while creating a cube using Cube Builder
we have installed the Cube builder for SSM 7.0 while creating the cube I am facing a error and the .TRC file contents are as follows :- LSS> LSS> set control LINKID SSM_CB_EA LSS> LSS> .... capture cube id in a control var to simplify queries on othe
-
Pages jumps to beginning of document... and rant...
Pages keeps jumping to the beginning of the document whenever I try to edit text in a table. And my tables keep moving around whenever I try to click on a cell. And since saving is automatic, if I forget to hit undo, the table ends up halfway off the
-
I just purchased $29.99 upgrade disk for Snow Leopard 10.6.3 and ten minutes later recieved an email from apple offering a free upgrade. I have been getting these warnings to upgrade to get to the CLOUD because my email account was going to be lost.
-
i have been trying to solve this problem for the last 4 hours!! i just can't get the program to get input from the console!!! This is the simplified version!! public class Main { int username = 0; public static void main(String[] args) { System.out.p
-
How can I open a protected PDF
How do I open a protected PDF using the acrobat.com (share)?