PanelTabbed, expand to all page (width and Height)

Hello I'm using jedevelper 11g
I succesfully set the width of a af:panelTabbed. How can I set the height (I cannot use height: 100%)?
Currently I have:
<af:panelTabbed id="pt2">
<af:showDetailItem text="Archives" id="sdi1"
styleClass="AFStretchWidth">
Cristian
Edited by: baol on Feb 24, 2010 7:07 AM

japher wrote:
Have you tried putting the panelTabbed into the center facet of a panelStretchLayout?Yes, it is into into the center facet of a panelStretchLayout.
Cristian

Similar Messages

Get page width and height

Hi I have my containers set out to 100% width and 100% height. In the end the actual size will always vary depending on the screen you are viewing it on. How would I go about in finding the containers size during runtime..

Look at the height and width properties. They will be in pixels.

How do I return the page width and height as a text variable?

Hi
I'm trying to create a media box for use in job to return information in the slug area. I have a script that will return the username of the computer as a text variable but I would also like to return the height and width in mm as a text variable too. Does anyone know how to this please?
Thanks

Hi Vamitul
Thank you for your response. I very new to scripting so I hope you'll bare with me.
How do I apply your code to indesign please? At the moment I have a script that returns the computer user name(an online script i found called 'addCustomVariables_103.jsx') that's going to be one of the variables I use in my media box. This lives in the startup scripts folder but i'm guessing I can't just add your code to it as yours will require an open document to return any values. How would I apply your code so it works in inDesign? Ideally i could do with this automatically adding the text variables at startup as I'll be installing this on several machines.
Thanks once again for your assistance.

Current page (not Document) width and height with JSX

Hi,
I am trying to create a script that saves every page of the document and add its width and height to the name.
So far I managed to get the dimensions of the document using:
app.activeDocument.pages.documentPreferences.pageWidth;
app.activeDocument.pages.documentPreferences.pageHeight;
That's ok when all the pages in the document have the same dimensions (Document Preferences).
However, when I use custom pages that does not work.
I tried the code below but does not work either.
for(i=0; i<nb;i++)
 app.activeDocument.pages[i].documentPreferences.pageWidth;
 app.activeDocument.pages[i].documentPreferences.pageHeight;
I have done some research and I don't seem to find any information regarding custom pages dimensions.
Can you please help with this?
Thanks in advance,
Isko

Main();
function Main() {
 var doc = app.activeDocument,
 pages = doc.pages,
 page, width, height;
 for (var i = 0; i < pages.length; i++) {
 page = pages[i];
 width = page.bounds[3] - page.bounds[1];
 height = page.bounds[2] - page.bounds[0];
 $.writeln("Page: " + page.name + " - " + "width = " + width + ", height = " + height);

[JS] Page item (rectangle frame) width and height

Following is my attempt at writing a function for width and height. It appears to work on rotated and sheared objects. Can anyone tell me if I'm on the right track?
>function WidthAndHeight(myRectangle) // Returns an array [width,height]
]var myRectangleTopLeft = myRectangle.resolve(AnchorPoint.topLeftAnchor, CoordinateSpaces.pasteboardCoordinates, true);
var myRectangleTopRight = myRectangle.resolve(AnchorPoint.topRightAnchor, CoordinateSpaces.pasteboardCoordinates, true);
var myRectangleBottomLeft = myRectangle.resolve(AnchorPoint.bottomLeftAnchor, CoordinateSpaces.pasteboardCoordinates, true);
]var d1x = (myRectangleTopRight[0][0] - myRectangleTopLeft[0][0]);
var d1y = (myRectangleTopRight[0][1] - myRectangleTopLeft[0][1]);
var myWidth = hypotenuse(d1x,d1y);
var d2x = (myRectangleTopLeft[0][0] - myRectangleBottomLeft[0][0]);
var d2y = (myRectangleTopLeft[0][1] - myRectangleBottomLeft[0][1]);
var myHeight = hypotenuse(d2x,d2y);
]return [myWidth,myHeight];
]function hypotenuse(d1,d2)
]]return Math.sqrt ( Math.pow(d1,2) + Math.pow(d2,2) );

Dave, you are absolutely right (no surprise here) about always returning points. I'm not sure, but I think this may actually be an InDesign bug. At the end of the 'resolve' method the 'true' value is meant to indicate 'use ruler units', I believe. Having read the documentation, however, it does seem like certain transformation coordinate spaces functions only work in points.
To make this a more complete function, I've updated it to include a conversion to the current ruler units. I'm using the UnitValue object, and perhaps I'm misunderstanding something, but I cannot easily convert to a new UnitValue using the ruler measurements enumerations (it requires a string value to represent the target units). So I've had to include a switch function to get from the enumeration to the string value. Also, the UnitValue object does not seem to work with agates, and I haven't gone so far as to write my own conversion function for that, so the function has to exit with an alert if the user has agates as their ruler units.
If anyone can offer a more elegant way of dealing with this, it would be great. Or even better, some insight into why the resolve method does not seem to honour the ruler units. This _is_ getting a bit over-the-top for a simple width and height function. Maybe Adobe will consider just adding the property to the page item and putting us all (well, certainly me, anyway) out of our misery (I've put in a feature request).
> function WidthAndHeight(myRectangle) // Returns an array [width,height]
]] var myRectangleTopLeft = myRectangle.resolve(AnchorPoint.topLeftAnchor, CoordinateSpaces.pasteboardCoordinates, true);
var myRectangleTopRight = myRectangle.resolve(AnchorPoint.topRightAnchor, CoordinateSpaces.pasteboardCoordinates, true);
var myRectangleBottomLeft = myRectangle.resolve(AnchorPoint.bottomLeftAnchor, CoordinateSpaces.pasteboardCoordinates, true);
]] var d1x = (myRectangleTopRight[0][0] - myRectangleTopLeft[0][0]);
var d1y = (myRectangleTopRight[0][1] - myRectangleTopLeft[0][1]);
var myWidth = hypotenuse(d1x,d1y);
var d2x = (myRectangleTopLeft[0][0] - myRectangleBottomLeft[0][0]);
var d2y = (myRectangleTopLeft[0][1] - myRectangleBottomLeft[0][1]);
var myHeight = hypotenuse(d2x,d2y);
]] var myHorizontalUnits = unitsEnumToString(app.documents[0].viewPreferences.horizontalMeasurementUnits);
var myVerticalUnits = unitsEnumToString(app.documents[0].viewPreferences.verticalMeasurementUnits);
]] myWidth = new UnitValue(myWidth,"points");
myHeight = new UnitValue(myHeight,"points");
]] myWidth = myWidth.as(myHorizontalUnits);
myHeight = myHeight.as(myVerticalUnits);
]] return [myWidth,myHeight];
]] function hypotenuse(d1,d2)
]]]] return Math.sqrt ( Math.pow(d1,2) + Math.pow(d2,2) );
]] function unitsEnumToString(myUnitsEnum)
]]]] switch(myUnitsEnum)
]]]]]] case 2054188905 :
]]]]]]] return "points";
]]]]]] case 2054187363 :
]]]]]]] return "picas";
]]]]]] case 2053729891 :
]]]]]]] return "inches";
]]]]]] case 2053729892 :
]]]]]]] return "inches decimal";
]]]]]] case 2053991795 :
]]]]]]] return "millimeters";
]]]]]] case 2053336435 :
]]]]]]] return "centimeters";
]]]]]] case 2053335395 :
]]]]]]] return "ciceros";
]]]]]] default :
]]]]]]] alert("Cannot convert to the current ruler units. Sorry.");
exit();

W3c valid site, initially no error reported by developer toolbar. But upon right click (giving the validation menue), the the toolbar reports two errors: width and height. Despite the fact that every page is validated! On the forum for the toolbar, this i

w3c valid site, initially no error reported by developer toolbar. But upon right click (giving the validation menue), the the toolbar reports two errors: width and height. Despite the fact that every page is validated! On the forum for the toolbar, this is said to be a Browser error. So, how can this be fixed? I'm using FF 3.6.6
== This happened ==
Every time Firefox opened
== after update from 3.5?

Hi Sara,
Can you give us the URL of the page you're having problems with and of the forum thread you mentioned?
Thanks!

Please help me :How to set the width and height for my View page "test.htm"

Hi,
 I have controller class. When i call the view[test.htm]from this controller class ,i am getting the view with output tableview..it is fine.
My requirement:
 the output view window is showing full browser window. I want the view output like showModeldialog. I want to set the width and height for the output view window. How is possible?
 or
i want to call the test.view in the window.showModelDialog..
Please help me .. Urgent requirement.

Yes you can set the width & Height of the view as follows..
<div style="width:580px; height:750px; margin-top:15px; overflow:auto;">
<htmb:form......>
</htmlb:form>
</div>
*Reward each useful answer
Raja T

How to create a map that is larger than the game in width and height?

hi,
i wounder how i can create a map(not the design) that is larger than the game in width and height, part of it will appear in the main page and anther part you can move to it after you press the arrow symbol, but the map is just one image so i want put it in line and out line the game page, and the out line part includes buttons and symbols the player can use, but it will be in line and the other part will be out line when you press the left arrow or the down arrow, how i can do that?
and is that possible to animate it so when the player press the arrow, will give it action to start the animation in one sec, i know how to animate it if that possible but i don't know which code i will use for the mouse click with the arrow symbol, and how to use the same code in the same symbol to start anther animation depending on which part of the map is on?

I don't know a lot about mask and masked layers and how to work with the normal layers beside i will use some 3D graphics but not in the background, i will explain all this to you to be more clearly.
first i am using action script 3.0
close ex,
you have 2d map"image" 900*300 pixel.
this image contains some 2d symbols when you click will go to anther normal map (anther normal layer) so they must appear.
your game 320*320 px, and the place the map will show on 300*300, and there's basics objects will be in most pages including the page that show the map so i don't know a lot about how this will work with mask layers.
so you can only see the left side of the map image and what it contains, while there's two arrows one to the left and one to the right there's three cases here,
first when it show the left side(start from x:0 to x:300), the left arrow will not active when you press and the right arrow will start an animation that make the map image move to the mid side in one sec when you press.
in mid side (start from x:301 to x:600) the same left arrow will active when you press to send you back to the left side while the same right arrow will be active to send you not to the mid side but to the right side,
when moved to the right side the same left arrow will be active to send you to the mid and the right will not active when you press and depending on that,
first how to make the large image appear with the three sides in the same place without effecting the other objects "like disappearing them" ?
and the codes i need in the same left or right arrow symbol to make different actions with the same symbol when clicked depending on which part of the map is on.

Java returning incorrect values for width and height of a Tiff image

I have some TIFF images (sorry, I cannot post them b/c of there confidential nature) that are returning the incorrect values for the width and height. I am using Image.getWidth(null) and have tried the relevant methods from BufferedImage. When I open the same files in external viewers (Irfanview, MS Office Document Imaging) they look fine and report the "correct" dimensions. When I re-save the files, my code works fine. Obviously, there is something wrong with the files, but why would the Java code fail and not the external viewers? Is there some way I can detect file problems?
Here is the code, the relevant section is in the print() routine.
* ImagePrinter.java
* Created on Feb 27, 2008
* Created by tso1207
import java.awt.Graphics2D;
import java.awt.Image;
import java.awt.print.PageFormat;
import java.awt.print.PrinterException;
import java.io.File;
import java.io.IOException;
import java.util.Iterator;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.stream.FileImageInputStream;
import javax.imageio.stream.ImageInputStream;
import com.shelter.io.FileTypeIdentifier;
public class ImagePrinter extends FilePrintable
 private final ImageReader _reader;
 private final int _pageCount;
 private final boolean _isTiff;
 //for speed we will hold current page info in memory
 private Image _image = null;
 private int _imgWidth = 0;
 private int _imgHeight = 0;
 private int _currentPage = -1;
 public ImagePrinter(File imageFile) throws IOException
 super(imageFile);
 ImageInputStream fis = new FileImageInputStream(getFile());
 Iterator readerIter = ImageIO.getImageReaders(fis);
 ImageReader reader = null;
 while (readerIter.hasNext())
 reader = (ImageReader) readerIter.next();
 reader.setInput(fis);
 _reader = reader;
 int pageCount = 1;
 String mimeType = FileTypeIdentifier.getMimeType(imageFile, true);
 if (mimeType.equalsIgnoreCase("image/tiff"))
 _isTiff = true;
 pageCount = reader.getNumImages(true);
 else
 _isTiff = false;
 _pageCount = pageCount;
 public int print(java.awt.Graphics g, java.awt.print.PageFormat pf, int pageIndex)
 throws java.awt.print.PrinterException
 int drawX = 0, drawY = 0;
 double scaleRatio = 1;
 if (getCurrentPage() != (pageIndex - getPageOffset()))
 try
 setCurrentPage(pageIndex - getPageOffset());
 setImage(_reader.read(getCurrentPage()));
 setImgWidth(getImage().getWidth(null));
 setImgHeight(getImage().getHeight(null));
 catch (IndexOutOfBoundsException e)
 return NO_SUCH_PAGE;
 catch (IOException e)
 throw new PrinterException(e.getLocalizedMessage());
 if (!_isTiff && getImgWidth() > getImgHeight())
 pf.setOrientation(PageFormat.LANDSCAPE);
 else
 pf.setOrientation(PageFormat.PORTRAIT);
 Graphics2D g2 = (Graphics2D) g;
 g2.translate(pf.getImageableX(), pf.getImageableY());
 g2.setClip(0, 0, (int) pf.getImageableWidth(), (int) pf.getImageableHeight());
 scaleRatio =
 (double) ((getImgWidth() > getImgHeight())
 ? (pf.getImageableWidth() / getImgWidth())
 : (pf.getImageableHeight() / getImgHeight()));
 //check the scale ratio to make sure that we will not write something off the page
 if ((getImgWidth() * scaleRatio) > pf.getImageableWidth())
 scaleRatio = (pf.getImageableWidth() / getImgWidth());
 else if ((getImgHeight() * scaleRatio) > pf.getImageableHeight())
 scaleRatio = (pf.getImageableHeight() / getImgHeight());
 int drawWidth = getImgWidth();
 int drawHeight = getImgHeight();
 //center image
 if (scaleRatio < 1)
 drawX = (int) ((pf.getImageableWidth() - (getImgWidth() * scaleRatio)) / 2);
 drawY = (int) ((pf.getImageableHeight() - (getImgHeight() * scaleRatio)) / 2);
 drawWidth = (int) (getImgWidth() * scaleRatio);
 drawHeight = (int) (getImgHeight() * scaleRatio);
 else
 drawX = (int) (pf.getImageableWidth() - getImgWidth()) / 2;
 drawY = (int) (pf.getImageableHeight() - getImgHeight()) / 2;
 g2.drawImage(getImage(), drawX, drawY, drawWidth, drawHeight, null);
 g2.dispose();
 return PAGE_EXISTS;
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 * @return
 public int getPageCount()
 return _pageCount;
 public void destroy()
 setImage(null);
 try
 _reader.reset();
 _reader.dispose();
 catch (Exception e)
 System.gc();
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public Image getImage()
 return _image;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getImgHeight()
 return _imgHeight;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getImgWidth()
 return _imgWidth;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param image
 public void setImage(Image image)
 _image = image;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setImgHeight(int i)
 _imgHeight = i;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setImgWidth(int i)
 _imgWidth = i;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getCurrentPage()
 return _currentPage;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setCurrentPage(int i)
 _currentPage = i;
}Edited by: jloyd01 on Jul 3, 2008 8:26 AM

Figured it out. The files have a different vertical and horizontal resolutions. In this case the horizontal resolution is 200 DPI and the vertical is 100 DPI. The imgage width and height values are based on those resolution values. I wrote a section of code to take care of the problem (at least for TIFF 6.0)
 private void setPageSize(int pageNum) throws IOException
 IIOMetadata imageMetadata = _reader.getImageMetadata(pageNum);
 //Get the IFD (Image File Directory) which is the root of all the tags
 //for this image. From here we can get all the tags in the image.
 TIFFDirectory ifd = TIFFDirectory.createFromMetadata(imageMetadata);
 double xPixles = ifd.getTIFFField(256).getAsDouble(0);
 double yPixles = ifd.getTIFFField(257).getAsDouble(0);
 double xRes = ifd.getTIFFField(282).getAsDouble(0);
 double yres = ifd.getTIFFField(283).getAsDouble(0);
 int resUnits = ifd.getTIFFField(296).getAsInt(0);
 double imageWidth = xPixles / xRes;
 double imageHeight = yPixles / yres;
 //if units are in CM convert ot inches
 if (resUnits == 3)
 imageWidth = imageWidth * 0.3937;
 imageHeight = imageHeight * 0.3937;
 //convert to pixles in 72 DPI
 imageWidth = imageWidth * 72;
 imageHeight = imageHeight * 72;
 setImgWidth((int) Math.round(imageWidth));
 setImgHeight((int) Math.round(imageHeight));
 setImgAspectRatio(imageWidth / imageHeight);
 }

SWF loader need to load 100% width and height

Hi,
 I have using dashboard in my application.In which the flex pages are loaded using SWF loader. the swf is not loading 100% when i minimize the browser. actually its loading 100% when the browser is full screen mode. suppose the browser is opened in 75% the swf also gets loaded based on the browser size. but after maxmizing the browser the SWF its not expaned to the actuall size of the browser. could you anybody help me plz..?
Thanks & Regards
Muthu

Hi,
 I have used this code to load the swf in the main application:
<mx:Canvas id="dashCanvas" creationPolicy="all" cachePolicy="on" width="100%" backgroundColor="#FFFFFF" horizontalScrollPolicy="off" verticalScrollPolicy="off" >
 <mx:SWFLoader id="dashBoard" trustContent="true" width="100%" height="100%" scaleContent="true" autoLoad="true"
source="@Embed(source='../../../../assets/appl/dashboard/dashboard.swf')" />
</mx:Canvas>
And i have set width and height as 100% in <mx:Appilcation> .
Thanks and egards
Muthu

Change the width and height of Landscape Layout for a report in 10G

Hi,
I'm new to reports and when i built the report in report builder 10g, the layout orientation was 'Landscape', hence I assumed that it'll be a landscape layout.
However, the width and height fields of the main section are 11 and 20 respectively. However, the height should ideally be 8.5. When i try to change it I get the following error message :
Layout canvas must remain large enough to fit layout objects.
Could you please tell me how to change the height of this landscape layout to 8.5 from 20.
The report has several main frames within a repeating frame, since the same report has to run multiple times.
Is it possible to have a repeating page across pages (crossing the horizontal margin) and hence have some of the main frames move down to the next page. I'm trying to do this to then be able to reduce the height of the main section of the report to 8.5. Its not working though because I'm getting the following error :
REP 1814 : Report cannot be formatted. Object "vertically" can never fit R_Main (the name of the repeating frame enclosing all objects)
Thanks,
Priyanka

To reduce the Hieght, first make the layout design fit into the new value..

Scripting TGetProperty width and height

Hello all,
i have a problem with the flash player in IE6 and FF2.
I have a html page with some flash movie elements on it.
I'm using SWFObject to bind the movies in.
After the onload event is fired, for each flash movie the
javascript function setCorrectSize4Flash will be called to resize
the html container element (embed, object tag) automatically by the
given width and height of the flash movie.
Therefore i'm checking if the movie is completely loaded and
if width and height is not undefined.
So if i'm getting width and height, i'm resizing the
container element to best fit in.
My problem is now, that the same movie used several times in
the same html page has every time different width and height
values. Sometimes the aspect ratio is 1:2 and sometimes it's 2:1.
Is this a problem of the flash player plugin or am i doing
something wrong.
Best regards,
bartmark

Thank you for your answer. But I don't understand:
The question is not the margin. I put in the body margin: 0; padding:0; and there is no margin.
I want to know the viewport: the width and height with the iPad in horizontal position and without the address bar.
This does not coincide with the 1024 x 768. (nor the 946 x 768 if I rest the address bar). I don't understand why
Thank you
Narcís

Fix width and height of accordion

Hi All
I am building an application using jquery accordion on region 3 of page 0. In each subregion I have a treeview and when a node is choosen shows details about this node. My issue is how to fix width and height of accordion. I tried with jquery tabs instead of accordion and I put this on region header 'style=\"overflow-x:auto;display:block;max-width:340px;min-width:340px;overflow-y:auto;max-height:450px;min-height:450px;";" ', and closing tag at region footer and it worked.
Any idea?
Thanks a lot.
Ricardo
Theme: 13
EPG
Version: 4.0.2.00.06

Hi Jitu
Thank you for your replay but it didn't work as I need.
I made the following test. I put on region attribute \style="width:350px;". When each subregion of accordion has only a treeview, it didn't work. When I created another subregion into accordion with a simple report, it worked fine.
I don't know what is going on and also how to fix it.
Any other idea?
Ricardo

Nested canvas in GridLayout can't get its width and height

Hello,
I have a class entitled DisplayCanvas, which will accept some parameters from an invocation in another class including a shape and message parameters. These parameters must be centered in the instance of DisplayCanvas.
For some reason, when I use this.getWidth() and this.getHeight() within my DisplayCanvas class, I get 0 and 0! I need the width and height in order to center the parameters the user will enter.
Why does the width and height result at 0? What can I do to get the width and height?
In my DisplayCanvas class notice the lines:
canWidth = this.getWidth();
canHeight = this.getHeight();
For some reason the result is 0 for each!
Here is my code for the DisplayCanvas class:
//import the necessary clases
import java.awt.*;
import java.applet.*;
import javax.swing.*;
//begin the DisplayCanvas
public class DisplayCanvas extends Canvas
//declare private data members to house the width and height of the canvas
private int canWidth;
private int canHeight;
//declare private data members for the shape and message
private String message;
private String shape;
private Color sColor;
private int sWidth;
private int sHeight;
private String font;
private Color ftColor;
private int ftSize;
//declare public data members
//constructor of DisplayCanvas
public DisplayCanvas()
     //set the width and height
     canWidth = this.getWidth();
     canHeight = this.getHeight();
     //set all data members to defaults
     message = "";
     shape = "";
     sColor = null;
     sWidth = 0;
     sHeight = 0;
     font = "";
     ftColor = null;
     ftSize = 0;
} //end the constructor
//begin the setParams function
public void setParams(String m, String s, Color c, int w, int h,
                        String f, Color ftC, int ftS)
      //set all private data members of DisplayShape to the arguments
      //this function assumes error checking was done by DemoShape
      message = m;
      shape = s;
      sColor = c;
      sWidth = w;
      sHeight = h;
      font = f;
      ftColor = ftC;
      ftSize = ftS;
} //end the setParams function
//begin the public paint function of ShowShape
public void paint(Graphics g)
      //set and output the shape according to the arguments
      //determine the x and y of the shape
      int x = (canWidth - sWidth) / 2;
      int y = (canHeight - sHeight) / 2;
      //set the color for the graphic object
      g.setColor(sColor);
      //output the shape
      g.drawRect(x, y, sWidth, sHeight);
      //set and output the message according to the arguments
      //set the color and the font for the graphic object
      g.setColor(ftColor);
      g.setFont(new Font(font, Font.PLAIN, ftSize));
      //determine the centering of the message
      //output the message with the settings
      g.drawString(canWidth + " " + canHeight, 10, 10);
} //end the paint function of ShowShape class
} //end the DisplayCanvas classHere is my form entry class using the nested DisplayCanvas instance entitled drawCanvas:
//import the necessary java packages
import java.awt.*;                  //for the awt widgets
import javax.swing.*;               //for the swing widgets
import java.awt.event.*;            //for the event handler interfaces
//no import is needed for the DisplayCanvas class
//if in the same directory as the DemoShape class
public class DemoShape extends JApplet
    //declare private data members of the DemoShape class
    //declare the entry and display panel containers
    private Container entire;           //houses entryPanel and displayCanvas
    private JPanel entryPanel;          //accepts the user entries into widgets
    private DisplayCanvas drawCanvas;   //displays the response of entries
    //required control buttons for the entryPanel
    private JTextField xShapeText, yShapeText, messageText, fontSizeText;
    private ButtonGroup shapeRadio;
    private JRadioButton rect, oval, roundRect;
    private JComboBox shapeColorDrop, fontTypeDrop, fontColorDrop;
    //declare public data members of the DemoShape class
    //init method to initialize the applet objects
    public void init()
        //arrays of string to be used later in combo boxes
        //some are used more than once
        String fonts[] = {"Dialog", "Dialog Input", "Monospaced",
                            "Serif", "Sans Serif"};
        String shapes[] = {"Rectangle", "Round Rectangle", "Oval"};
        String colors[] = {"Black", "Blue", "Cyan", "Dark Gray",
                            "Gray", "Green", "Light Gray", "Magenta", "Orange",
                            "Pink", "Red", "White", "Yellow"};
        //declare variables to assist with the layout
        //these are the left and right justified x coordinates
        int ljX = 10; int rjX = 150;
        //this is the y coordinates for the rows
        int yRow1 = 10;     //the shape rows
        int yRow2 = 40;
        int yRow3 = 60;
        int yRow4 = 130;
        int yRow5 = 150;
        int yRow6 = 210;    //the message rows
        int yRow7 = 240;
        int yRow8 = 260;
        int yRow9 = 300;
        int yRow10 = 320;
        int yRow11 = 360;
        int yRow12 = 380;
        //these are the widths for the text boxes, drop downs
        //message entry, big message entry and radio buttons
        int tWidth = 30; int dWidth = 100;
        int mWidth = 250; int bmWidth = 250;
        int rWidth = 125;
        //the height is universal, even for the messages!
        int height = 25;
        //set a content pane for the entire applet
        //set the size of the entire window and show the entire applet
        entire = this.getContentPane();
        entire.setLayout(new GridLayout(1, 2));
        //create the entry panel and add it to the entire pane
        entryPanel = new JPanel();
        entryPanel.setLayout(null);
        entire.add(entryPanel);
        //create the display canvas and add it to the entire pane
        //this will display the output
        drawCanvas = new DisplayCanvas();
        entire.add(drawCanvas);
        //entry panel code
        //add the form elements in the form of rows
        //the first row (label)
        JLabel entryLabel = new JLabel("Enter Shape Parameters:");
        entryPanel.add(entryLabel);
        entryLabel.setBounds(ljX, yRow1, bmWidth, height);
        //second row (labels)
        JLabel shapeTypeLabel = new JLabel("Select Shape:");
        shapeTypeLabel.setBounds(ljX, yRow2, mWidth, height);
        entryPanel.add(shapeTypeLabel);
        JLabel shapeColorLabel = new JLabel("Select Shape Color:");
        shapeColorLabel.setBounds(rjX, yRow2, mWidth, height);
        entryPanel.add(shapeColorLabel);
        //third row (entry)
        rect = new JRadioButton("Rectangle", true);
        oval = new JRadioButton("Oval", false);
        roundRect = new JRadioButton("Round Rectangle", false);
        rect.setBounds(ljX, yRow3, rWidth, height);
        oval.setBounds(ljX, yRow3 + 20, rWidth, height);
        roundRect.setBounds(ljX, yRow3 + 40, rWidth, height);
        shapeRadio = new ButtonGroup();
        shapeRadio.add(rect);
        shapeRadio.add(oval);
        shapeRadio.add(roundRect);
        entryPanel.add(rect);
        entryPanel.add(oval);
        entryPanel.add(roundRect);
        shapeColorDrop = new JComboBox(colors);
        shapeColorDrop.setBounds(rjX, yRow3, dWidth, height);
        shapeColorDrop.addFocusListener(new focusListen());
        entryPanel.add(shapeColorDrop);
        //the fourth row (labels)
        JLabel xShapeLabel = new JLabel("Enter Width:");
        xShapeLabel.setBounds(ljX, yRow4, mWidth, height);
        entryPanel.add(xShapeLabel);
        JLabel yShapeLabel = new JLabel("Enter Height:");
        yShapeLabel.setBounds(rjX, yRow4, mWidth, height);
        entryPanel.add(yShapeLabel);
        //the fifth row (entry)
        xShapeText = new JTextField("200", 3);
        xShapeText.setBounds(ljX, yRow5, tWidth, height);
        xShapeText.addFocusListener(new focusListen());
        entryPanel.add(xShapeText);
        yShapeText = new JTextField("200", 3);
        yShapeText.setBounds(rjX, yRow5, tWidth, height);
        yShapeText.addFocusListener(new focusListen());
        entryPanel.add(yShapeText);
        //the sixth row (label)
        JLabel messageLabel = new JLabel("Enter Message Parameters:");
        messageLabel.setBounds(ljX, yRow6, bmWidth, height);
        entryPanel.add(messageLabel);
        //the seventh row (labels)
        JLabel messageEntryLabel= new JLabel("Enter Message:");
        messageEntryLabel.setBounds(ljX, yRow7, mWidth, height);
        entryPanel.add(messageEntryLabel);
        //the eighth row (entry)
        messageText = new JTextField("Enter your message here.");
        messageText.setBounds(ljX, yRow8, mWidth, height);
        messageText.addFocusListener(new focusListen());
        entryPanel.add(messageText);
        //the ninth row (label)
        JLabel fontTypeLabel = new JLabel("Select Font:");
        fontTypeLabel.setBounds(ljX, yRow9, mWidth, height);
        entryPanel.add(fontTypeLabel);
        JLabel fontColorLabel = new JLabel("Select Font Color:");
        fontColorLabel.setBounds(rjX, yRow9, mWidth, height);
        entryPanel.add(fontColorLabel);
        //the tenth row (entry)
        fontTypeDrop = new JComboBox(fonts);
        fontTypeDrop.setBounds(ljX, yRow10, dWidth, height);
        fontTypeDrop.addFocusListener(new focusListen());
        entryPanel.add(fontTypeDrop);
        fontColorDrop = new JComboBox(colors);
        fontColorDrop.setBounds(rjX, yRow10, dWidth, height);
        fontColorDrop.addFocusListener(new focusListen());
        entryPanel.add(fontColorDrop);
        //the eleventh row (label)
        JLabel fontSizeLabel = new JLabel("Select Font Size:");
        fontSizeLabel.setBounds(ljX, yRow11, mWidth, height);
        entryPanel.add(fontSizeLabel);
        //the final row (entry)
        fontSizeText = new JTextField("12", 2);
        fontSizeText.setBounds(ljX, yRow12, tWidth, height);
        fontSizeText.addFocusListener(new focusListen());
        entryPanel.add(fontSizeText);
        //display panel code
        //use test parameters
        //these will later be retrieved from the entries
        drawCanvas.setParams("Hello", "roundRect", Color.red,
                            100, 100, "Serif", Color.black, 12);
        //set the applet to visible
        //set to visible and display
        entire.setSize(800, 600);
        entire.setVisible(true);
    }   //end the init method
    //declare an inner class to handle events
    private class focusListen implements FocusListener
        //supply the implementation of the actionPerformed method
        //pass an event variable as the argument
        public void focusLost(FocusEvent e)
        { JOptionPane.showMessageDialog(null, "Focus lost."); }
        //declare an empty focus gained function
        public void focusGained(FocusEvent e) {}
    }   //end testListen class
}   //end DemoShape class

Sorry for glossing over your code sample, particularly as it looks like one of the best I've seen so far on the forums, but I'm pretty sure the answer you are looking for is as follows:
Java doesn't render a component until paint() is called so until then you are not going to have any size settings because the jvm simply doesn't know how big the visual component is. This makes sense when you think about what the jvm is doing. The layout manager controls the display of the components depending on the settings it is supplied. So until it knows how many components you want, where, what kind of spacing, etc, etc, etc, how can the size be determined.
The true cycle of events is therefore:
create an instance of DisplayCanvas,
add it to your container,
make the container visible (which renders the component),
get the size of the DisplayCanvas instance.
You are being hampered because your desired chain of events is:
create an instance of DisplayCanvas,
get the size of the DisplayCanvas instance,
add it to your container,
make the container visible.
This state of affairs is highly annoying and then leads to the next question "what do we do about that?". There is a cunning trick which is to get the jvm to render the component to an off-screen image, thus calculating the dimensions of the component so that you can do precisely the kind of enquiry on the object that you have been looking for. It should be noted that this may not be the visual size for all the reasons given above, but it is the "preferred size" for the component. Check the Swing tutorials and have a look at the section on Layout Managers for a run down on what that means.
Anyway, we can use this handy code sample to determine the preferred size for your component. Notice the call to "paint()" (normally you would never make a direct call to paint() in swing) and the "g.dispose()" to free resources:
package com.coda.swing.desktool.gui;
import java.awt.Component;
import java.awt.Dimension;
import java.awt.Graphics2D;
import java.awt.image.BufferedImage;
public class PaintUtil
     public PaintUtil()
          super();
     public static Component paintBuffer(Component comp)
          Dimension size = comp.getPreferredSize();
          comp.setSize(size);
          BufferedImage img = new BufferedImage(size.width, size.height, BufferedImage.TYPE_INT_ARGB);
          Graphics2D g2 = img.createGraphics();
          comp.paint(g2);
          g2.dispose();
          return comp;
}Before you make a call to getWidth() or getHeight() put in a call to "PaintUtil.paintBuffer(this);" and see what happens.
By the way, I can't claim credit for this code ... and I really wish I could remember where I got it from myself so I can thank them :)

How to set Jspx page width and hight programatically ?

Hi All ;
i need to browse a jspx page has Different width & hight sizes ;
Please Can SomeOne tell me ow to set Jspx page width and hight programatically ?
Regards;

In that case you need to use JavaScript.
Resizing the browser window in JavaScript is done by using window.resizeTo(400, 400);
I
Thanassis

PanelTabbed, expand to all page (width and Height)

Similar Messages

Maybe you are looking for