Panic/Block after update download! Unique case or general problem?
Yesterday, June 12 in the morning (Europe), i have downloaded a automatic Apple update, after that my MacBook Pro 13'' is going in Panic, noway to deblock it... a am a unique case or there is a general problem?
You are not unique sorry to say.
Thunderbolt Software Update 1.2 Causes Boot Failures
Thunderbolt Update plaguing MacBook Pros with kernel panics
Similar Messages
-
HT1338 debugger called panic message after updating computer is now stuck?
debugger called panic message after updating my macbook pro...computer is stuck
Attempt to boot into Safe Mode If it does, download and run this app: http://www.etresoft.com/etrecheck
Post the results.
Also, open Console, click on System Diagnostic Messages in the log list, and see if the Kernel Panic log is there. If so, copy and paste the results here. -
I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank youIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
After update 8.1.2 i had problem with sync my content from ITunes with IPod
After update 8.1.2 i had problem with sync my content from ITunes with IPod. It stucks on moment when its waiting for implementing changes (step 5 of 5) Hours and hours i'm waiting but still the same. So i cant use my Ipod at all. I restarted Ipod and delete and download Itunes again. Still stuck in the same moment. Help please. Someone has some problems like that?
I have an error message saying that "An unknown error occurred (-54)"
-
After update my iphone 4, I have problem charging my phone. It will always display charging is not supported with this accessory. What happen to iOS 5, how come it can register my charger?
I have a 3Gs and I cant charge my iPone with any of my non Apple charges such as my Logitech stereo since I upgraded to IOS5... what did Apple do?
/M -
Still after update to 5.0.1 same problem with the 4S with dial out, connecting to internet, echo in reception. It is the second phone.
Try deleting the account(s) you're having problems with, resetting your phone (hold on/off and home buttons simultaneously 10-15 seconds until Apple logo appears, release buttons and wait for it to restart), then add back your mail accounts. I've read that this has worked for some.
-
After update N95 8gb i got big problems.
I make a backup of all but not the 8gb-memory, and restured all after upate, and everyting seems to work fine.
First problem; i see now i have no 3g 3 (no connection) competely dead, i can not use the phone to communicate.
Strange everything work fine after update yesterday and this morning, something happen when it was in the locker at work.
And now i can't use Maploader, it say i have no memorycard, i understand that problem, i delete the whole Cities-folder this morning, because i dont need Nokia GPS-program Wayfinder anymoore, i choose Nav4all instead, i try the maploader only to for testing, i don't want to download any maps.
I test maploader now only bacause my phone is completely dead in communication, try to find out why.
I check in Nokia Nseries PC Suit everything on PC & mobil are the latest update.
I have another mobile SE M600i with 3g 3-cashcard, i by that cashcard only to enable the phone to start, not for communication, that mobile have full 3g (and probably work fine).
Was it the thing that i delete the Cities-map, no it can't be, because i use the N95 8gb and it work fine after that.
after work i even have a missed call on that mobile, but i can't call back, it's dead in communication now.
Strange things happens now.
Kjell O15-Apr-2008 11:48 PM
kjello wrote:
Where can i change networksettings, all settings i find is; 3, tre, tre(01), tremms, tremms(01)
Is your phone in another language? You should normally see 2 or 3 options.
1. Dual Mode
2. UMTS
3. GSM
Maybe you could try reseting the phone if nothing else works.
Always remember to backup your phone before performing resets as your data may be lost.
Try these
*#7780# - Restore factory settings - resets all the settings to the default
*#7370# - Reformat your phone -
After updating OSX Mavericks, I have two problems:
1) my mobile broadband software / dongle does not work (I use a Huawei E169 HSDPA USB stick).
2) my network printer does not work (I use a Canon C5030i).
On both I have tried to reinstall the latest driver software available, and still it does not help. I am confused as this is obviously related to the upgrade, but dont know if the solution should come from Apple or the two other vendors concerned...
AlexThe other two vendors need to update their drivers. However, Canon's update will likely come through Apple in the form of a printer update.
You might try removing the printer and re-adding it to the Print & Scan system pref. Sometimes that will make them work after updates or upgrades. -
after update to 6.0.1 the sound very low how solve thise problem can i restor to ios 6 another time you solve problem battery by update 6.01 but you make problem with rining sound pls solve solve problem
http://support.apple.com/kb/TS2802
-
Please Help! Can't open Safari, I-Tunes after update download.
This happened after I ran a software update and downloaded the new I-tunes, Quicktime, and the latest security update.
I got an almost full disk message, but the downloads were completed ok. I was told to restart, but a bug hit at that point and I held down the power key to close down.
When I booted up again, all seemed normal, but
now when I click on the Safari and I-tune icons they blink, but then don't open.
Any ideas on what happened and how to link up the finder and these programs again? Is this a case for the famous Pram zap?
(Other, such as I-photo etc. are not affected. On the other hand Mac help, any html safari page, and software update are all inoperative.)
Many thanks for any suggestions!
John
Powerbook G4 Mac OS X (10.4.7)The solution was to use the original
Tiger DVD to re-install the OS. I had let the disk space on the startup disk get too low, and a download corrupted some of the OS.
Thanks to all for the help!!!!!!
John -
Plug ins blocked after new download
I keep getting the message Plug ins Blocked since I updated this morning. I have a MAC 10.6 with Safari 5. How do I get this fixed? I am not computer savvy so I need step by step directions.
Thanks.Uninstalling and Reinstalling will usually solve this:
Uninstall Flash Player | Mac OS
Then download and run the installer:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg -
ITunes get blocked after update
I update my iTunes to version 10.5.2, and after the update i restarted the app, and the after the check on the library, it starts to update the library and in this step does nothing for hours, I thoght giving it the time to do the work could go well, but it did it for 7 hours and the bar didin't move and the mouse icon kept to be the circle rainbow as it were thinking or processing, I restarted several times, and always the same. I even downloaded and instal again, and the same. I don't know what to do???
have you lost only the recent purchases or all your purchased library ?
Check this article it might help
http://docs.info.apple.com/article.html?artnum=301749 -
My ipad is blocked after update asking me to enter a code that I do not have
Please I need some help, I was proposed today to update my ipad and uknowingly I just clicked on to launch the update. Now it's asking me to enter a code to install the update but I do not have nor received any code for that, I tried to enter my apple account password just to see if can work but without success. Now it's completely blocked on this only display and if I try to enter any code again it deactivate my ipad. I do not know what to do. Please help! Thanks a lot for your kind attention.
You were most likely asked to create a code. That passcode is then used to unlock the device. This is turned on by the installation of iOS 7 as a security measure. Once the installation completes you can turn this off if you want but you must have the passcode to do that.
If your iPad is now locked you will have to connect to iTunes on your computer to restore the device. Be sure to install the latest version of iTunes which is 11.1 or greater. When restoring you will most like have to enter the Apple ID and password that was used previously on the device. -
New 21" iMac with SSD; panic loop after updating to 10.8.3
I updated to 10.8.3 this morning without issues. Later in the day, the computer spontaneously restarted and now is in a panic loop. Safe boot doesn't work, but I did restart from a clone. I also started from the Recovery Disk and Disk Utility confirms the disk is fine. Here is the panic:
Interval Since Last Panic Report: 6731981 sec
Panics Since Last Report: 1
Anonymous UUID: E178DF23-205D-5853-FB09-A99931F956CA
Mon Apr 1 21:12:47 2013
panic(cpu 3 caller 0xffffff80062b7e75): Kernel trap at 0xffffff7f86a3f227, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffffffffffffff, CR3: 0x0000000014d6d024, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0xffffff80d88ac004, RCX: 0xffffff801a81a51f, RDX: 0x0000000000002390
RSP: 0xffffff80fb1f2d00, RBP: 0xffffff80fb1f2d00, RSI: 0x000000000000001e, RDI: 0xffffffffffffffff
R8: 0xffffff7f86a3f2da, R9: 0xffffff7f86a3f211, R10: 0xffffff7f86a03398, R11: 0xffffff7f86a3f22d
R12: 0xffffff80d88ac004, R13: 0xffffff7f86a02e01, R14: 0xffffff801a07e004, R15: 0xffffff7f86a03305
RFL: 0x0000000000010286, RIP: 0xffffff7f86a3f227, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffffffffffffff, Error code: 0x0000000000000000, Fault CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff80fb1f29a0 : 0xffffff800621d626
0xffffff80fb1f2a10 : 0xffffff80062b7e75
0xffffff80fb1f2be0 : 0xffffff80062cd3bd
0xffffff80fb1f2c00 : 0xffffff7f86a3f227
0xffffff80fb1f2d00 : 0xffffff7f885bd541
0xffffff80fb1f2d30 : 0xffffff7f885bd938
0xffffff80fb1f2d50 : 0xffffff7f869fe6c4
0xffffff80fb1f2da0 : 0xffffff7f86a35f5e
0xffffff80fb1f2f60 : 0xffffff7f86a359c7
0xffffff80fb1f2fa0 : 0xffffff7f86a2e394
0xffffff80fb1f3000 : 0xffffff7f868f5374
0xffffff80fb1f3050 : 0xffffff7f869394a5
0xffffff80fb1f3890 : 0xffffff7f8693ad9d
0xffffff80fb1f3ac0 : 0xffffff7f8693b81b
0xffffff80fb1f3b60 : 0xffffff7f868dac7b
0xffffff80fb1f3bd0 : 0xffffff7f868da3bd
0xffffff80fb1f3c30 : 0xffffff7f868dbbde
0xffffff80fb1f3c60 : 0xffffff7f8689371e
0xffffff80fb1f3cf0 : 0xffffff7f8688be70
0xffffff80fb1f3d20 : 0xffffff7f868dc40b
0xffffff80fb1f3d70 : 0xffffff8006632dbb
0xffffff80fb1f3dc0 : 0xffffff8006663437
0xffffff80fb1f3e30 : 0xffffff8006297fcf
0xffffff80fb1f3e80 : 0xffffff8006220aed
0xffffff80fb1f3eb0 : 0xffffff8006210448
0xffffff80fb1f3f00 : 0xffffff800621961b
0xffffff80fb1f3f70 : 0xffffff80062a5db6
0xffffff80fb1f3fb0 : 0xffffff80062cdc23
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7f86882000->0xffffff7f868b9fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[7EECA562-F708-37FF-9757-CA9C98939903]@0xffff ff7f86844000
com.apple.NVDAResman(8.0.6)[6DE39FFA-F7E3-3EF5-AF75-43F2A69F6288]@0xffffff7f868 d9000->0xffffff7f86be8fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[7EECA562-F708-37FF-9757-CA9C98939903]@0xffff ff7f86844000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[6A1A36AC-2F79-34AF-A162-A97FE16705E3]@0xff ffff7f868c5000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7f86882000
com.apple.nvidia.gk100hal(8.1)[5122FE48-4118-30A5-8E71-7219C580E7B9]@0xffffff7f 88541000->0xffffff7f88845fff
dependency: com.apple.NVDAResman(8.0.6)[6DE39FFA-F7E3-3EF5-AF75-43F2A69F6288]@0xffffff7f868 d9000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[7EECA562-F708-37FF-9757-CA9C98939903]@0xffff ff7f86844000
BSD process name corresponding to current thread: WindowServer
Boot args: -v
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.2.1: Thu Oct 18 12:13:47 PDT 2012; root:xnu-2050.20.9~1/RELEASE_X86_64
Kernel UUID: 3F93B852-872F-3DF0-BCF8-46D48024C422
Kernel slide: 0x0000000006000000
Kernel text base: 0xffffff8006200000
System model name: iMac13,1 (Mac-00BE6ED71E35EB86)
System uptime in nanoseconds: 10859124969
last loaded kext at 10068376985: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f87ba6000, size 45056)
loaded kexts:
com.Logitech.Control Center.HID Driver 3.5.1
com.apple.filesystems.autofs 3.0
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AGPM 100.12.81
com.apple.driver.ApplePlatformEnabler 2.0.6d1
com.apple.iokit.IOBluetoothSerialManager 4.1.2f9
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.5fc10
com.apple.driver.AppleHDA 2.3.5fc10
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.13
com.apple.driver.AppleMikeyDriver 2.3.5fc10
com.apple.GeForce 8.0.6
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleIntelHD4000Graphics 8.0.6
com.apple.driver.AppleMuxControl 3.2.13
com.apple.driver.AppleBacklight 170.2.5
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.nvidia.NVDAStartup 8.0.6
com.apple.driver.AppleIntelFramebufferCapri 8.0.6
com.apple.iokit.IOBluetoothUSBDFU 4.1.2f9
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.2f9
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.driver.CoreStorageFsck 296.10
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AirPort.Brcm4331 612.20.14
com.apple.iokit.AppleBCM5701Ethernet 3.5.0b9
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBHub 5.5.0
com.apple.driver.AppleSDXC 1.4.0
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleUSBXHCI 1.5.1
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.nvidia.gk100hal 8.1.0
com.apple.driver.DspFuncLib 2.3.5fc10
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.AppleHDAController 2.3.5fc10
com.apple.iokit.IOHDAFamily 2.3.5fc10
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.1.2f9
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleGraphicsControl 3.2.13
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.NVDAResman 8.0.6
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.2f9
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginFamily 5.3.0d47
com.apple.driver.AppleUSBHIDKeyboard 170.2
com.apple.driver.AppleHIDKeyboard 170.2
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.9
com.apple.driver.AppleThunderboltDPInAdapter 1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.6
com.apple.driver.AppleUSBMergeNub 5.5.0
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.driver.CoreStorage 296.10
com.apple.driver.AppleThunderboltNHI 1.6.3
com.apple.iokit.IOThunderboltFamily 2.1.8
com.apple.iokit.IO80211Family 510.4
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBUserClient 5.5.0
com.apple.iokit.IOUSBFamily 5.5.0
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Unable to gather system configuration information.
I suspect it has to do with some graphics drivers. Suggestions? Thanks.Your system is crashing when it comes on
com.Logitech.Control Center.HID Driver 3.5.1
My recommendation would be to update or uninstall the app that is using it. Remember OS X does not have to be running the app in order for the KP to occur, it just needs to "see" it. If you choose to uninstall locate and follow the developers instructions for doing so. -
Repost - Website Download problems after update download
Hello,
This is likely something simple but I have not found the solution yet. A couple of nights ago, the system update indicator popped up, so I downloaded some updates. Since then, some of my websites do not fully download and download with the quicktime symbol having a question mark in the middle. Very few animated portions of websites come up, no interactive areas (surveys, etc) and many pictures do not appear.
What is the solution?
Thank you.Did look,what kind of update it was ?
Maybe you are looking for
-
Cannot export video: AME cannot read from source, Installation Error
Ok, I've seen a lot of people on here talk about this and I have tried using their solutions but nothing has worked. I cannot export anything from Premier Pro using Media Encoder. When I try, I get an yellow warning sign saying that it cannot read f
-
What's a good email client for E71?
Hi Having struggled to make email work on the E71, I have now given up and accepted the fact that I will need to purchase a 3rd party email client which will provide Authentication which my server needs. Can you suggest which one I should buy? And yo
-
MuseJSAssert Error. Need help.
I need help. All of a sudden, I am getting an error on my website in IE (8 or 9). Here is the error: MuseJSAssert: Error calling selector function:TypeError: 'undefined' is not a function (evaluating 'PIE.attach(this)'). Please help someone. This si
-
Update for Vista for Labview 8.0 (student version german)
Hallo ich habe folgendes Problem, ich habe ein Studentenversion von Labview 8.0, die auch brauche, aber ich kann diese nicht richtig nutzen, weil ich als Betriebssystem Vista verwende. gibt es irgendein update oder patch das es ermöglicht, Labview 8.
-
My mac os 10.8.5 is not booting without install usb.
Hello someone please help me! I have installed mac os 10.8.5 and it's working fine but there's one problem when I installed my mac os It started fine but when again I tried to start mac without installation USB it showd boot0 error ...!! Now My mac i