Panic-can't move FCE project to DVD

Help. I have completed a FCE sequence, saved it, but when I attempt to export it to a quicktime self-contained movie I get an "General error #34" Message. The original video is from a Flip camera in the AVI format. I used Streamclip to convert the footage to a QT movie then imported to FCE and edited with no problem. But I cannot get it to export. Must have a DVD by tonight for party. Help.

Does Sequence>Render All have Full checked on? Have you rendered everything in the sequence? Did you mixdown the audio? What are the specifications of the media that's in the timeline?
Try trashing your preferences and repairing permissions.
http://www.fcpbook.com/Misc1.html
Message was edited by: Tom Wolsky

Similar Messages

How can I move my project from external hard drive to my macbook pro?

How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

Try here...
Setting-up a new Mac from an old one, its backups, or a PC

I have Iphoto library in Aperture. Can I move the projects from iPhoto to aperture project by dragging?

I have Iphoto library in Apeture. Can I move the projects from iPhoto to aperture project by dragging (within the apeture program)? Is this making a duplicate of all the photos? It seems to work?? It then leaves my Iphoto library in apeture empty. I would like to do this just to reorganize the photos between the two. I feel that I may have doubles and would like all pictures of one year in same project in Aperture instead of going between both.

Tell us more, please. I am not quite sure, what you want to do and how you are using Aperture and iPhoto?
Which versions of Aperture and iPhoto are you using?
Do you have separate photo libraries for Aperture and iPhoto, or are you opening your iPhoto libraries in Aperture?
I have Iphoto library in Apeture.
Did you import an iPhoto library into Aperture? And now you are seeing a section "iPhoto Library" in the Aperture projects list in the Inspector?
Events and albums you imported from iPhoto (Import > Library > Some iPhoto Library) will be imported as Aperture projects and albums, and they will behave exactly as other Aperture projects and albums.
Can I move the projects from iPhoto to aperture project by dragging (within the aperture program)? Is this making a duplicate of all the photos? It seems to work?? It then leaves my Iphoto library in apeture empty.
You can drag images from any project in Aperture to other projects and that will move (not duplicate) the images and all its versions to that project. And when you drag all images from the project to another project, the remaining project will be empty and can be deleted. (Caution: Photos that you have hidden in iPhoto will not be visible in Aperture. If you are not sure, if you have hidden photos, open the library again in iPhoto and unhide all photos).
I feel that I may have doubles and would like all pictures of one year in same project in Aperture instead of going between both.
There should be no problem with moving all photos from the same years to the same projects. You can also drag projects in "Projects" view on top of each other. That will merge them.
You could also define smart albums in Aperture to search for images taken at a specific period of time:
File > New > Smart album:
Then, in the Smart Settings HUD, click "Add Rule" and add a Date or Calendar rule.
For example, to find all images taken in 2010, use a rule "Date > Capture Year is > 2010"
To search for Photos taken at a specific date or at several dates, use a "calendar" rule. This way, you do nat have to type the date, but can pick it from a mini calendar.

I'm running Final Cut Express 2. How can I move entire project and application from one internal hard drive to another? Ran out of space on one drive. Thanks.

I'm running Final Cut Express 2. My video project is 95% done and I've run out of space on my 500g internal hard drive. How can I (1) move the complete FCE program and video to my unused 250g internal hard drive and operate it from there and (2) how do I then purge all the FCE info from the 500g drive without losing anything from the 250 drive?
Also, is it possible to change the aspect ratio from 4:3 to 16:9 when the project is finished? If so, how? I now know this all should have been done before I started. Thanks for the help.

1. You can't move the application. It must remain on the system drive. Move your capture scratch folder to the external FireWire drive and use the reconnect function in the project.
2. What's the media 16:9 or 4:3?

Can I edit FCE projects when the files are on a External HD?

Hello,
I've recently reinstalled Snow Leopard. Since I have a clean start, I'm thinking about new ways to manage my video files for FCE editing.
Video projects take up most of the space on my HD, so I'd like to keep them on an external drive this time.
Is working on FCE projects while all the video files are saved on an external drive a bad idea? Or will this work out just fine? This way I don't have to first save them to my internal HD, finish the project, move video files to the external HD, and point FCE to where they're saved again. There just on the external HD from the start and while I'm editing the video! I can get a HD with firewire too.
Thanks.
Message was edited by: MrChicken

Is working on FCE projects while all the video files are saved on an external drive a bad idea?
Not at all. This is the correct way to work with a laptop.

How can I MOVE some projects from one library to another?

As the aperture library grows quite big and I want to split it into several smaller ones. How can I move projects from the old library to a new one without export them and re-import them all again? Is it possible to retain all adjustments after migration?
Thanks!

You export the project by CTRL / Right- click the project and choose 'Export' > 'Project'. The same if you go via the file menu.
Every adjustment you made, books created, albums etc. will be kept in the exported project and are available again when you import it to another library.
Regards
Paul K

Can't move a project to external drive. Followed Apple's help instructions. Is it because I partitioned the external drive?

When I drag the project to the external drive in the event library, it does not lock on. Thus, options for Move Project or Move Project and Events don't show up.The WD external drive has been formatted correctly. It has 2 partitions, one for Time Machine, one for saving files and folders.

zarathu wrote:
You don't say if you are using iMovie 11. The only way to move a project is to have '11.
And then you have to save it as an Archive. You can move the archive. You can also save it as a disk image but that will be a completed document.
If there is no"Archive Project" in your file menu, you are out of luck.
The issue here is that the iMovie 11 Help files are incorrect (see below).
It is actually very simple to move a project and all its associated components to an external drive.
You have to do it however in the Project Library and not mix it with the Event Library as the help files suggest.
Type in External Drive into iMovie Help and read through the results.
Best, Z.

Can I archive imovie project to dvd?

Is it possible to archive your imovie project to dvd when finished?

Yes, you can find out how on the iMovie forum.

FCE project to DVD and to actual film for film festivals

I'm almost done with a documentary around 1 hour in length. I want to enter it in a few film festivals. Some require DVD format, another needs an actual film copy of it after submission (if it gets in). I'm also trying to get use of a movie theatre to show a private screening of it when finished.
Here's the question. Will everything be messed up because FCE uses 30 frames per second and film uses 24 fps? Can the transfer be made from a DVD itself or what steps do I need to take to have a good quality copy of a DVD and film too.
I've just learned FCE for this project and haven't output anything yet. Only have experience with iMovie to iDVD or using Toast to burn DVD of past projects.
Thanks for any help you can give.
Anne Z

The film will cost you around $20000 and if you think now about this issue - that is kind of very late in the game. If you need help look here:
http://www.hdforindies.com
Cheers
Andreas

Can I move idvd projects to an external hard drive?

I need to make space on my hard drive and would like to move all the dvd projects to an external hard drive. Can I do this without causing any problems with accessing them again?

Yes and No
The Yes part:
It is possible to run an iPhoto Library with the Originals stored outside the Library folder, but I strongly caution against it - especially if the Library and the files are on different volumes, as you propose. Why? the short answer: if the files become detached from the database then you will end up reconnecting every single one, one by one. For more see this:
https://discussions.apple.com/thread/3062728?tstart=0
Further, if the external is not plugged in when you launch iphoto it will ask you where each file is. All of them. One by one.
So that's really a 'Yes... but...' I suppose.
The No part:
You have currently got a Managed Library. There's no way to convert to a Referenced one.
Then there's the... 'how much money do you want to throw at this' bit?
If you purchase Aperture this is a cinch. It can relocate masters, reconnect them if they get seperated and so on. Pay more, get more options. And Aperture can use the same Library as iPhoto, but there is a bigger learngn curve.

Can't burn multiple projects to DVD

I imported photos into iPhoto, then separated the photos into three different albums, each with a different name. I then worked on each individual album of photos in iDVD, creating slideshows, giving each slideshow a different Theme and audio (songs) from iTunes. Everything is working fine so far.
I then burned the first slideshow onto a DVD. When I attempted to burn the second slideshow onto the same DVD, it would not work.
I then saved each slideshow as a disk image and attempted to burn them with the disk utility. Again, I can burn the first slideshow but not the second and third to the same DVD.
I then attempted to drag the three .img files onto the icon of the DVD and it seemed to be working, however, I eventually got an error message. At this point I opened the .img files and dragged the Audio_TS and Video_TS files (from all three projects) onto the DVD icon. It appeared to burn to the DVD, but when I placed the DVD into my DVD player, only the first project burned.
I am gathering from other posts on this site that it is possible to burn multiple slideshows with audio onto a DVD but I certainly haven't figured out how to do it.
Can anyone tell me what I am doing wrong and how I can burn multiple slideshows with audio, originating from iDVD, onto one DVD. Any help would be most appreciated.
Power Mac G-4 Mac OS X (10.4.7)

Excellent progress -- you wondered about multiple themes, and although I haven't done that recently, you are be able to create a submenu with the Folder icon; once you're on the submenu, just set a new theme and it should just change the menu you're working on.
from iPhoto via QuickTime to iDVD, this process does not allow adding captions to the photos in iDVd...is my assumption correct.
-- Correct, you'll have to add captions in iPhoto (has a basic titling feature), in Quicktime Pro, or use the extensive text features in software like Photoshop/Elements (add it to a copy of the photo and then reimport to iPhoto). It's a bit of work, but you can create a nice effect of the title fading out with this latter option (if you want your slide to have a five sec duration, use the titled photo for 3 sec then the original slide for 2 seconds -- then use the cross-dissolve transition).
Deleting iPhoto pictures will not affect the QT movie if you've made it self-contained (typical setting), and iDVD will be unaffected as well.
I'm not aware of any restriction on iPhoto transitions that would require a new video card -- the rendering will take longer on slower processors -- what are your symptoms (perhaps post it separately for others to weigh in?)?.
John

Can't burn imovie project to DVD

I am using my sony video camcorder to import to imovie. That was a success and I was able to export the video to iDVD, but it will not let me burn to a DVD. It says that the file is too large to record on a single layer disc and i need to insert a double layer disc. How is it not able to burn when a DVD can record 120 minutes, and mine is 1 hour and 55 minutes? I tried to save as disk image so I could burn it on toast, but it wont let me do that either.

First off, in the preference setting, you have to change from the default setting of Best Performance (60 minutes max) to Best Quality (120 minutes max) to allow the full two hour time span for an iDVD project.
Second, that 120 minutes includes everything, iDVD menus, music, motion, slideshows, etc. not just the movie itself. So with a movie that is 115 minutes long, you only have 5 minutes for menu and iDVD slide shows and stuff like that. Drop in a few menus each with a 2-minute song and you easily blow past the 120 minute mark.
Patrick

Under PC with windows 9, can I move garageband projects from one iOS devide to another ? (e.g iphone to ipad)

I made a garageband project with iphone and export it to itunes to move it to my ipad.
Hoever, exported .band is decrbed as folder, not a file, so i cannot move it to ipad.
Do you know any way to solve this?

Windows 9??? I didn't think 8 was finished yet!
At the moment iTunes can't add a folder to the file sharing area, only individual files. Looking at an iMovie project it is exported as a zip file with a .iMobileMovie extension and I don't really understand why the same hasn't been done with .band exports.
I have seen reports of success using iExplorer (formerly iPhoneExplorer) to add projects to the device but having completely failed to get it to work, or even show me the contents of the GarageBand app's folder on my iPhone I can't really suggest that as an option right now.
I have however submitted a bug report about the issue. With luck it will be addressed at some point.
tt2

I have final cut pro x, how can i copy my project to dvd

i have final cut pro x on my i mac, i creat a video project and would like to copy to dvd. how can i do that. thanks haidar

DVD should show as an option (destination) in the menu associated with Share. To actually go to a DVD, there has to be a DVD burner connected to the Mac.
Ernie

With fcp can you render/burn project to dvd?

Can Final Cut Pro render/Burn project to a DVD?

FCPX has a basic Export to DVD feature which will finally burn a disk.
'basic' because it has no fancy design nor menu options such as iDVD, DVDSP or Encore etc.-

Panic-can't move FCE project to DVD

Similar Messages

Maybe you are looking for