Panic during installation of Mac osx Lion

Hey, well its the second time that I have this problem, I have a macbook pro lamined, (oriniginaly with leopard), first I update to snow leopard, and then i bought the lion, but when I start the installation it says "I have to restart the computer", y press Ok and after "PANIC", I have tried everything, restart on safe mode, enter the installation disc, but it just dont do anything. Maybe you can help me. I attached the panic:
panic(cpu 0 caller 0xffffff80005e0e81): "A kext releasing a(n) OSString has corrupted the registry."@/SourceCahce/xnu/xnu-1699.24.23/libkern/c++/OSObject.cpp:218
Debugger called:≤panic>
Backtrace (CPU 0 ), Frame:Return Address
0xffffff80732dbd30 : 0xffffff8000220702
0xffffff80732dbdb0 : 0xffffff80005e0e81
0xffffff80732dbe00 : 0xffffff80005e4162
0xffffff80732dbe20 : 0xffffff80005ef8af
0xffffff80732dbe60 : 0xffffff80005f1957
0xffffff80732dbe90 : 0xffffff80008e4bd4
0xffffff80732dbef0 : 0xffffff80008e4d1e
0xffffff80732dbf10 : 0xffffff800061836b
0xffffff80732dbf50 : 0xffffff800066e85b
0xffffff80732dbf90 : 0xffffff80002331f2
0xffffff80732dbfb0 : 0xffffff8000820057
can't perform kest scan: no kext summary
BSD process name corresponding to current thread: Unknown
Boot args: config="\Mac Os X Install Data\com.apple.Boot" container-dmg=file:///Mac%20Os%20x%20Install%20Data/InstallESD.dmg root-dmg=file:///BaseSystem.dmg
Mac Os version:
Not yet set
Kernel version:
Darwin Kernel version 11.3.0: Thu Jan 12 18:47.41 PST 2012; root:xnu-1699.24.23-1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6c3-C927E4D3D0D6
System uptime in nanoseconds:478249505

Please select  ▹ About This Mac ▹ More Info from the menu bar. Under Hardware Overview, what do you have for the following?
Model Identifier
Boot ROM Version
SMC Version

Similar Messages

Installation Error - Mac OSX Lion

I got the following installation error (four attempts same error). I launched Activity Monitor as instructed to terminate the indicated activity, but it wasn't listed as running. Any clues?

You should try resetting the PRAM by rebooting while simultaneously holding down the Command-Option-P-R keys until you hear the Second chimes. That may clear it. However, in all honesty, the message you're getting does sound like either a very corrupted or failing hard drive. You may need to take it in to Apple.
Hope this helps

Do you have a problem connecting to Wi-Fi? (iMac Mid 2011 Model)Mac OSX Lion 10.7.3

Did you just start up or restart your mac recently? If you did you might have experineced a problem with your Wi-Fi. I was unable to access anything that required Wi-Fi. So what I did was I restarted my iMac and my Wi-Fi was working again.
What might have caused the problem
A. The Wi-Fi chip did not start or restart (During the process of Starting or Restarting your iMac)
B. It could be a bug in Mac OSX Lion 10.7.3 or lower.
I hoped this helped you out

If it was previously working then try a smc and pram reset.
If that doesn't fix it then see if vlc can handle the video.

Failed to load preferences error on upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1

Hi Folks,
Since the upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1, i have been getting
failed to load preferences error. During the upgrade the vpn connection get established, but once
i disconnect and try to connect again its starts bombing on "failed to load preferences". For now
i keep uninstalling anyconnect and reinstall an older version which while autoupgrading to 3.0.3054
is able to connect for the first time. Its getting very painful. Any help from the support team will be
appreciated!

I had the same issue and it is due to corrupted preferences.xml file under /opt/cisco/vpn/profile directory. Easy way to fix is uninstall the client and remove the profile directory under /opt/cisco/vpn. Removing the profile directory requires a root access on MAC OS X.

E2000 Parental control tab missing - Mac OSX Lion

I am trying to use the Parental Control feature. I can't use Cisco Connect as there currently isn't an update for this router for Mac OSX Lion
The firmware version in the support site hasn't been updated for ages, and I am running the latest (v 1.0.04)
The Parental control tab, that is supposed to appear in the web browser interface isn't there. It's supposed to be, but doesn't show up.
Any ideas why or what the work around might be?
Thanks

If you want to use the Parental Control Feature then it will be in the name of Access Restriction instead of Parental Control…
Cisco Connect 1.4 comes with the latest Linksys routers. It is compatible with Mac OS X Lion. This has resolved compatibility issues encountered in the past.
Here is the link for the Cisco Connect Software Installation:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=21463&userrole=Links...

Trying to update cc desktop on mac osx lion and keep getting file download error 204

Hi ,
I have Mac OSX Lion 10.7.5 and keep getting this error when trying to update my cc desktop app that is reporting an update. There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page.(Error code: 204)Contact Customer Support
please resolve.

I have the same problem and was on lots off sides of adobe, no answer then i searched in the log data and found this.
06/21/14 19:04:06:710 | [INFO] | | ACC | LBS | ApplicationFacade | | | 43925 | ****************Starting LBS workflow*******************
06/21/14 19:04:06:715 | [INFO] | | Download | LBS | ProductInfo | | | 43925 | Product locale not specified in the product information file
06/21/14 19:04:06:715 | [INFO] | | Download | LBS | ProductInfo | | | 43925 | Product name not specified in the product information file
06/21/14 19:04:06:715 | [INFO] | | Download | LBS | LBSUtils | | | 43925 | Launching LBS in elevated mode
06/21/14 19:04:12:270 | [INFO] | | ACC | LBS | ApplicationFacade | | | 43999 | ****************Starting LBS workflow*******************
06/21/14 19:04:12:276 | [INFO] | | ACC | LBS | WorkflowManager | | | 43999 | LBS launched in LEGACY mode
06/21/14 19:04:12:399 | [INFO] | | Download | LBS | SystemCheck | | | 44009 | System OS Version - major = 10, minor = 7, bugFix = 5
06/21/14 19:04:12:399 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | ACCC System requirements check passed
06/21/14 19:04:12:433 | [INFO] | | Download | LBS | ProductInfo | | | 44009 | Product locale not specified in the product information file
06/21/14 19:04:12:433 | [INFO] | | Download | LBS | ProductInfo | | | 44009 | Product name not specified in the product information file
06/21/14 19:04:12:433 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | Bootstrap LBS is successful
06/21/14 19:04:12:451 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | Bootstrapper Lock acquired
06/21/14 19:04:12:469 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | LBS Lock acquired
06/21/14 19:04:12:501 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | Deployment lock check passed
06/21/14 19:04:12:519 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | The resolved URL for package service is https://prod-rel-ffc.oobesaas.adobe.com/adobe-ffc-external/core/v1/applications?name=Creat iveCloud&name=CCLBS&osVersion=10.7.5&platform=osx10
06/21/14 19:04:14:236 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | Successfully downloaded application xml at path /tmp/912ACE51-6B35-48F6-9D63-D863680F0EE3/applications.xml
06/21/14 19:04:14:314 | [INFO] | | ACC | LBS | WorkflowManager | | FileUtils | 44009 |
06/21/14 19:04:14:314 | [ERROR] | | ACC | LBS | PDM | PackageDownloadManager | | 44009 | Failed to create folder at temp location for download operations
06/21/14 19:04:15:143 | [ERROR] | | ACC | LBS | PDM | PackageDownloadManager | | 44033 | Could not init xml parser with download manifest file at
06/21/14 19:04:15:222 | [ERROR] | | ACC | LBS | WorkflowManager | | | 44009 | PDM stopped with fatal error in downloading PIM with error -3
06/21/14 19:04:15:344 | [ERROR] | | ACC | LBS | WorkflowManager | | | 44009 | Failed in DOWNLOAD PIM
06/21/14 19:07:19:779 | [INFO] | | Download | LBS | ETS | | | 43999 | Waiting for the async thread to get the task completed
06/21/14 19:07:19:788 | [INFO] | | Download | LBS | ETS | | | 44013 | Async thread is completed. Now exiting from function.
06/21/14 19:07:19:790 | [INFO] | | ACC | LBS | ApplicationFacade | | | 43999 | ACC installation end with exit code: 214
06/21/14 19:07:19:790 | [INFO] | | ACC | LBS | ApplicationFacade | | | 43999 | ****************Closing LBS workflow*******************
Adobe please help, it´s not the first problem installing updates in CC, i we pay for it !!!

Mac OSX Lion on a Retina MacBook Pro (2014)

Hi,
I need to install Mac OSX Lion on a Retina MacBook Pro (2014) on a second partition. I have the installer for Lion and everything, but I'm not sure if it will work on such a new mac. Any experiences?
Thanks
Marco.

It won't work. You can't install an older version than the Mac shipped with.
Matt

Mac osx Lion Won't Install!

PLS Help! Mac osx Lion won't install on my Mac!
My download was almost finished and then it gave me an error saying "An error occures while running scripts from the pakage "mzm.eqqwamzh.pkg."
Then, when i clicked the Applications Folder there was The Mac osx Lion Installer i clicked on it but it gave me an Error too saying "This copy of the install Mac OS X Lion Application is Damaged,and can't be used to install Mac OS X."
See Pictures of the Errors Below (Click the middel of the Pic to see it closely):

Be happy if you use music applications... many stop to work w lion... :-)

SQL developer wont start on Mac OSX Lion

Hi there,
hoping someone can help me with this one, I've been running SQL Developer 3 on the macbook no problems for about a year, I recently upgraded to Mac OSX Lion and now when I try to start SQL Developer it will not run.
I have downloaded and installed the latest version of java as directed on the SQL Developer download page.
When I start SQL developer and view the Activity Monitor the "bash" process starts to use 100% CPU very quickly and SQL developer does not even get to the splash screen.
Can anyone point me in the right direction in terms of diagnosing this issue? Is there a log file I can review or way of starting SQL developer with specific arguments?
Kind regards,
stu

Irian wrote:
Usually the SetJavaHome points to the root directory for the JVM installation, this directory in your case appears to be
/Library/Java/JavaVirtualMachines/1.6.0_26-b03-383.jdk/Contents/Home
so try setting this in the SetJavaHome command for your SQL Developer (the bin folder will be added internally)
I'm not completely sure as i do not use macs, but it's worth a try.
Just had this same problem with Mountain Lion/SQL Developer 3.2.2, right after my upgrade to Mountain Lion. The path shown in Irian's response is what did the trick for me. The /System/Library/.... path shown by some others doesn't even exist on my machine. Interesting....
Earl

Kernel Panic during Installation

Recently, Tiger (in my macbook) has been experiencing crazy problems. Programs refuse to start, quit suddenly, the OS X get kernel panics, and other issues. So I went to the this Apple message board and ask. I tried various solutions; they all work, BUT the problems would return and new ones arise. The main solution was reparing disk and its permissions. It worked at first but troubles persist. So then I decided to reinstall Tiger through archive and install. It almost finished but once it was setting up iwork, everything stopped for an hour until I manually shut the computer down. I attempted another try, same problem. So I moved onto erase and install. Everything worked out well until I came to the setup info screen. Things were going fine until BAM, kernel panic. I shut down the mac again and it loads os x. Now i'm afraid things will repeat itself. How often would one get a kernel panic during installation (in this case info setup)? I just want everything normal.
Mac mini, MacBook Mac OS X (10.4.7) 1GB, 1.25GB Ram (respectively)

How often
would one get a kernel panic during installation (in
this case info setup)?
Um...never? Kernel Panics are never something you should encounter on any sort of regular basis. Sounds like it could be a bad hardware component, most likely the RAM. Has it been upgraded since you got it?
Anyway, I'd take it to an Apple Store or get on the line with AppleCare asap.

My mac OSX lion is now very slow, any idea why?

my mac OSX lion is now very slow, any idea why?

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion/Mountain Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT

I am running Mac OSx Lion 10.7.2. My problem is I can't search on an external network server for a file with the finder toolbar anymore. Nothing shows up and it will not search. I was able to in snow-leopard and am no longer able to w. Lion. Suggestions?

I am running Mac OSx Lion 10.7.2.
My issue is that I am not able to run a search in the finder toolabar on a network server. No files show up nor does it search on the server anymore. I was able to run the search in snow-leopard and am no longer able to do so with Lion. Is there a preference I can change or some kind of app or program I can download that will help me with this issue? This is extremely problematic for me as I am searching for files all day everyday. Thank you!

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

HT4818 hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx

hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastian

hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastian

Mac OSX Lion v10.7.4 ipod touch isn't showing up in iTunes

I am using a Mac OSX Lion v10.7.4 and my ipod touch isn't showing up in my itunes. I've followed all of the articles' instruction and restated them both a million times and it still hasn't worked. What is there left to try?

have you tried using a different usb port on your computer some are not strong enough, does your cord still charger your phone? if not then maybe its the cord. have you uninstall itunes? ( it has six things to successful unistall it)

Panic during installation of Mac osx Lion

Similar Messages

Maybe you are looking for