Panic kernal attack when upgrading OS
The last 4 times I have attempted to update from Lion to Mountain Lon and 1 try on Mavericks, I have gotten a panic kernal attack on the initial reboot. I then have to rebuild my Mac from Lion. Apple support has been unable to help me and I really don't want to do a complete clean install. The last time there must have been some damage of some type done as my MacBook Pro now runs quite slow even after Disk & Permissions were checked and corrected. Can anyone give me some help on this? I am currently at 10.7.5 on 2.53Ghz Intel Core i5 with 8GB 1067 MHz DDR3 memory.
Boot with the D key and run the hardware test.
You should backup your data before upgrading anything. Once backed up we can isolate your problem further.
Similar Messages
-
First Time Getting Panic Kernel's when upgrading to Mavericks
Evening everyone, I've had my Early 2011 Macbook Pro for 3 years now never had an issue till I recently upgraded to Mavericks. I've upgraded my Ram to 8gigs about 2 1/2 years ago with no issues as well. Here's what I get...
Anonymous UUID: B31ECF8E-EF29-840D-9D63-F752CDE80159
Wed Jan 8 18:01:31 2014
panic(cpu 6 caller 0xffffff80280dc19e): Kernel trap at 0xffffff80280a2ec9, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000010000028, CR3: 0x000000001c34704b, CR4: 0x00000000000606e0
RAX: 0x0000000000000001, RBX: 0x0000000010000000, RCX: 0xffffff803dbeb280, RDX: 0x0000000000000821
RSP: 0xffffff8119b03d20, RBP: 0xffffff8119b03d50, RSI: 0x0000000020c85580, RDI: 0xffffff802c425cf8
R8: 0xffffff8110bbd078, R9: 0x0000000000000000, R10: 0xffffff8119b03a70, R11: 0x0000000000000500
R12: 0xffffff802c425cf8, R13: 0xffffff802b3f5000, R14: 0x0000000000372000, R15: 0xffffff8040b9baa0
RFL: 0x0000000000010206, RIP: 0xffffff80280a2ec9, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000010000028, Error code: 0x0000000000000000, Fault CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff8119b039b0 : 0xffffff8028022f69
0xffffff8119b03a30 : 0xffffff80280dc19e
0xffffff8119b03c00 : 0xffffff80280f3606
0xffffff8119b03c20 : 0xffffff80280a2ec9
0xffffff8119b03d50 : 0xffffff8028077c5e
0xffffff8119b03f20 : 0xffffff80280dc5dc
0xffffff8119b03fb0 : 0xffffff80280f350b
BSD process name corresponding to current thread: Dock
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000027e00000
Kernel text base: 0xffffff8028000000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 4342160222121
last loaded kext at 256067004900: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7faa5f2000, size 65536)
last unloaded kext at 317867566927: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7faa5f2000, size 57344)
loaded kexts:
com.apple.filesystems.smbfs 2.0.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.11
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.kext.AMDFramebuffer 1.1.4
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.AMDRadeonX3000 1.1.4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleIntelHD3000Graphics 8.1.8
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.kext.AMD6000Controller 1.1.4
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleLPC 1.7.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleIntelSNBGraphicsFB 8.1.8
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleThunderboltIP 1.0.10
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.driver.AppleUSBHub 650.4.4
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleSDXC 1.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOAcceleratorFamily 98.7.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOSurface 91
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.kext.AMDSupport 1.1.4
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleThunderboltDPInAdapter 2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily 2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.0
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.driver.AppleThunderboltNHI 1.9.2
com.apple.iokit.IOThunderboltFamily 2.8.5
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 8 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R UJ-8A8
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1
I've ran Memtest and no errors
I've done 2 clean reinstalls of Mavericks so far
I re-downloaded Mountain Lion so when I get home from work I can just say **** it and reinstall it hoping the problem goes away.
Last effort is you guys, so any help would be awesomeFixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Panic Kernal: You need to restart your computer, Help please...
Yesterday I installed an update on my MacBook and everything went haywire. I installed the Apple updates
that were recommended for my computer when it did it's weekly update
check. After the install I quit all open applications and did a
restart per the on screen prompt. Finder closed and the computer just
sat for over a half hour and never would finish shutting down. No key
strokes or commands would do anything. As a last ditch effort I held
the power key down until it shut down. I waited a minute then powered
back up. The gray screen with the apple logo comes up then the spinning wheel. Then a
panic kernal saying the computer needs to be restarted. I tried ten
times then I reset the PRAM then I did two hardware checks. First the
short check then the long one. Both tests showed all hardware to be
fine.Then I called Apple. They told me to reset the PRAM, told me to
do a hardware check then told me to boot in safe mode. Then told me to
try an archive reinstall by inserting disc one, power on, then hold
the C key after the startup chime sounds. One of two things happen
when this is done, it either goes to a blank blue screen or the "You
need to restart the computer" message comes up. If I power on with the
disc in and hold the option key the hard drive and the disc shows on
the screen. If I click on the hard drive the "restart message comes up. If I
click on the disc the blank blue screen usually comes up but twice the
"restart" message came up. I have tried all of the start-up key strokes, Once I got into safe mode but I can't get into it anymore, it now gives the you need to restart message. I can get into Verbose and Single user mode but I don't know of anything to try once I'm in either of those modes.I tried to boot system from single user mode by typing in the command sh /etc/rc but a long list of code just comes up and says something about the panic kernal which I believe is telling me that the same problem
I have trying a normal boot is keeping it from booting in single user mode also. I can do a hardware test(I've done this 3 times and everything shows to be OK). The main problem I have now is it won't boot normally and it won't boot from the install disc so I am truly stuck. I am at a loss as to what I should try next
since I can't even reinstall the software. Any help will be greatly
appreciated especially since my free phone help ended 2 days ago and
today was the first time I ever needed it!!
thanks, JasonThanks for replying, I have no peripherals attached, I am booting from the MacBook Tiger DVD one that came with the machine. I get the panic kernal with or without the disc installed. All hardware checks out fine in the three hardware checks I've done. I am almost positive the problem is stemming from the Apple updates performed since this is exactly when my problems began(trying to restart after the Apple updates). I just can't get the machine to boot from the disc no matter what I try so I can reinstall the operating system. I even tried using an external DVD-ROM once to see if it would boot from it but it did the exact same thing as when I try booting from the internal drive. Yes my files are backed up to an external hard drive. I've got no problem doing a Nuke and Repave if I must but since it won't boot from the disc I don't know how I can even do this. I know it is under warranty but since the hard ware checks OK it looks like there would be a way to get it running again without sending it in for repairs. However I am starting to think that's what I'm gonna have to do. I'm just glad I still have an old clamshell iBook to work with so I can access the internet to seek help. Thanks for your input, can you think of anything else I could try?
-
So I am getting the classic Panic Kernal Screen that tells me I must restart my computer. I have done so many times, however, I cannot get it past the startup gray screen with the white apple. I have looked at all trouble shooting ideas in forums and on the web and they all say to boot from the start-up disc and do an archived re-install. I have tried holding down "C", and holding down "X" and also holding down "OPTN" and still it locks up and tells me to re-start. is there another way to boot from the disc and re-install OS 10.4?
Thanks so much!HI Eric,
When you hold down the C key are you booting from your install disk?
*"is there another way to boot from the disc and re-install OS 10.4?"*
Mac OS X 10.4, 10.5: About installation options
You can try booting from your Tiger disk and do an erase and install.
Try booting with only the keyboard and mouse connected. Disconnect any other peripherals.
Try booting in Safe Mode
Carolyn -
How to transfer data & apps,When upgrading from a iPhone 3G to an iPhone 4 or soon 5
When upgrading from a iPhone 3G to an iPhone 4 or soon 5
How to transfer all phone number and apps and notes, pretty much copy my old iPhone to my new iPhone , all content and apps.
Will it transfer my text messages also?
Is this a nightmare or an easy task?Connect to iTunes and backup. Then when you receive the new phone restore from that backup.
http://support.apple.com/kb/ht1766
http://support.apple.com/kb/ht1414 -
We deployed a SharePoint hosted app then used it for a while then we needed to upgrade it to be provider hosted app.
we used the same AppID and name with the new package then uploaded the package to the app catalog.
the old app in the site contents now has a note that there is a newer version and prompts to upgrade.
the upgrade fails with access denied even for site collection administrator.
is there really some permission issue or the upgrade can't be done?
We are volunteers, if the reply help you mark it as your answer. thanks!!Hi,
According to your post, my understanding is that you got access denied error when upgrade the SharePoint hosted app to provider hosted app.
How did you upgrade a SharePoint hosted app to a provider hosted app?
They are two different type apps, why not just create a new provider hosted app?
To create a provider hosted app, we should create a certificate that is used as “security token issuer”.
There are two articles about creating provider hosted high trust app, you can have a look at them.
http://blog.karstein-consulting.com/2013/01/08/create-provider-hosted-high-trust-app-for-sharepoint-2013-short-guide/
http://msdn.microsoft.com/en-us/library/fp179901.aspx
What’s more, there is an topic about the troubleshooting tips for SharePoint high trust app, you can refer to it.
http://blogs.technet.com/b/speschka/archive/2012/11/01/more-troubleshooting-tips-for-high-trust-apps-on-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Error 3194 when upgrading to ios 7.
I receive error 3194 when upgrading to ios7 on my iphone 4 ( and I really don't know if it is 4s or just 4). I am working though the itunes softward on my home computer. It seems I am stuck in something called recovery mode. I have tried a variety of suggestions found on the web (e.g., editing a "host" file, checking firewalls and connectivity, etc.) to no avail. Any suggestions?
The iPhone was either previously jailbroken (the DFU restore should have fixed that) or it has a hardware error. I would vote for the latter.
-
Receiving a -43 error message when upgrading to ios5.
How do you get past error code -43 when upgrading to ios5 on ms vista??
The only solution that I've found was here
http://gizmodo.com/5849160/the-complete-guide-to-updating-to-ios-5&rct=j&sa=X&ei =bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CCoQ-AsoADAA&q=iphone+ios+5+error+-43+when+ba ckup&usg=AFQjCNGGVjsr_rky-tiplqdj-1fBfXofPA
and here
http://www.macworld.com/article/162925/2011/10/how_to_upgrade_your_ios_device_to _ios_5.html&rct=j&sa=X&ei=bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CC4Q-AsoATAA&q=iphon e+ios+5+error+-43+when+backup&usg=AFQjCNEBBPx-ymDJPGPd-sBy8TZ1dDTbeQ
by:
1. Doing backup.
2. Using the Restore button and following the
All works fine now and all the settings are there.
BTW: it took over 2 hours to restre and that is with lots of apps and without songs, phothos and movies... that I removed before.Gizmo link above. -
I have given many of my photos ratings, but the ratings don't come over when upgrading Lightroom to the newest version. Anything I can do to recreate my ratings?
Press CTRL+SHIFT+DEL, change the top option to '''Everything '''and in the bottom menu, checkmark '''Cache '''(uncheck all the others). Then click '''Clear Now'''.
Then go to '''Tools''' | '''Options '''| '''Advanced '''and in the Network tab | Offline Storage menu, click '''Clear Now'''.
Then go to '''Tools '''| '''Options '''| '''Privacy''', click '''Show Cookies '''button and delete the cookies for lumosity.com.
Then try again. -
Error in "tempInit" when upgrading Flash MX AS2 FLA to Flash CS6 AS3 FLA
I experienced a compiler error in "tempInit" when upgrading an AS2 project to AS3. "tempInit" is something internal to Flash Authoring, because it doesn't exist in my project and other people have gotten the same error.
I've read about this problem, and everyone thought it was because of an instance with a bad name, such as one that includes spaces or equals a keyword or something like that, and people have shot down the idea that the problem is with the library symbol, but I'm convinced now that it's a corrupted library symbol. Here's why:
I had 8 instances of a particular movie clip on stage, each on a different frame.
When I deleted the symbol from the library, the compiler error went away (but so did my stage instances). So that simply tells me that the problem is with that particular clip (I originally had to delete each clip in my library one at a time and recompile to determine the offending clip), but that obviously didn't rule out the name problem since the stage instances get removed when I deleted the corresponding library symbol. Still, I knew it couldn't be a name problem, because all instances had a valid name "mainidea".
I ruled out the name problem by creating a new library symbol identical to the first (it's just a few text fields with a rectangle drawn around them). Without changing the names of the existing instances on stage, I used the "swap" button to swap in the new library symbol. The use count on the old one dropped to zero, and the use count on the new one went up to 8. The compiler error was gone, and it only went away once the use count for the old symbol was zero.
The old and new library symbols are identical as far as I can see. Same child objects at the same positions, same textfield content, same child instance names, no ActionScript code, etc. Since there was no discernible difference, I came to the conclusion that the original library symbols had somehow been corrupted under the hood, somewhere in the pipeline between opening an old Flash MX file and setting the flash player version to 11.4 and selecting AS3 as the script language. Somewhere in that process, the Flash Authoring environment screwed something up. Does anyone know anything about this problem?
I have hundreds of files I need to upgrade, and that symbol was copied to each of them as they were created years ago, and I think I'm going to experience this problem with all of them. It's time-consuming to duplicate the old symbol and replace all the instances for every single file, so I'm trying to find the source of the problem and a workaround to avoid it.It works, but slowly as if somer AS1 code is interpreted into
very
ineffective machine code by AS2 interpretor
My question was if it is know which particular AS1 features
have these
problems in AS2
"ggshow" <[email protected]>
ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ
× ÎÏ×ÏÓÔÑÈ
ÓÌÅÄÕÀÝÅÅ:
news:f17r79$efu$[email protected]..
> some AS1 not working when the movie run in AS2...
> if you want to publish it as AS2, then write it in AS2.
>
> * it is time to learn AS3
> -
Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked
Yes.
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.
If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
Otherwise, you may need to do one of the following steps.
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
If you continue to have problems with your disk, it may be physically damaged and need to be replaced -
I lost my Visual Voicemail when upgrading to iphone 5. New phone was set up from itunes backup of iphone4 but my Mac tells me there is an iCloud back up of my phone prior to this date. Will my Vis Voicemail be on this and can I get it on my new phone?
I see. Apple's documentation on what is included in the iCloud backup doesn't explicitly say that it contains voicemails, but that doesn't mean it does not. You would just have to try restoring the backup to find out.
To restore to your iCoud backup you have to start by erasing the phone. Go to Settings>General>Reset and tap Erase All Content and Settings. Then go through the setup screens on the phone and when given the option, choose Restore from iCloud backup. You will then sign into your iCloud account, accept the terms and conditions, then choose the backup you wish to restore from. To see an older backup, you may need to tap "Show older backups" (see image below). Be sure your phone is connected to wifi and your charger as this may take some time to finish.
If this does not recover your voicemails, you can check to see if you have an older iTunes backup that may contain them. Available backups are shown in iTunes Preferences>Devices on the Backups list.
If all else fails, you could try contacting your carrier. Voicemail is a carrier feature and they may have an archive you could access. -
XMP data not showing up in the custom file info panels when upgraded to CC
For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
2. Raw data is not visible in CC in the File info panel.
3. This occurs in new documents where we create the xmp wrapper while the file template is built.
4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
Any feedback or a direction will be appreciated.I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
is no longer the node that can be appended.
Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
<rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined. -
Encountered error 6 when upgrading Iphone 5s from 7.1.2 to 8.3
I encountered error 6 when upgrading Iphone 5s from 7.1.2 to 8.3
I've tried upgrade iphone on three computers , the results are all the same.
One of the computers successfully upgrade my ipad to 8.3.
There are 2GB left on IPhone 5S before I perform the upgrade.
It should be enough for iTunes to finish the process, right?
But in the log, it says "copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device"
why is that?
Any way for me to continue the upgrade? it seems it's almost done.
Thank you
the end of the log is as below:
[10:36:29.0714] Could not find libAppleSWDHIDFlashUpdater.dylib
[10:36:29.0714] entering fixup_var
[10:36:29.0714] entering update_var_directory_hierarchy
[10:36:29.0714] replace_data_partition_path: moving /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets
[10:36:29.0714] copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device
[10:36:29.0714] copy /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets failed: 0x2
[10:36:29.0714] unable to copy directory: 2
[10:36:29.0714] failed to replace path mobile/Library/PreinstalledAssets: 2
[10:36:29.0714]
[10:36:29.0714] ==== end of device restore output ====
[10:36:30.0280] AMRAuthInstallDeletePersonalizedBundle
[10:36:30.0421] <Restore Device <<<<<IMEI>>>>>>0>: Restore failed (result = 6)
[10:36:30.0542] Restore completed, status:6
[10:36:30.0542] Failure Description:
[10:36:30.0542] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
[10:36:30.0542] Depth:1 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - Failed to handle message type StatusMsg）
[10:36:30.0542] Depth:2 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - failed to fixup var）Hello there, Kenduck.
It sounds like you are trying to update your iPhone 5s to the most current version of iOS and are getting an Error 6 message. The following Knowledge Base article offers up some great information in regards to that very error message:
Get help with iOS update and restore errors - Apple Support
Particularly:
Check your security software
Errors: 2, 4, 6, 9, 1611, 9006.
Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
If you still see the error message, check for USB connection issues.
Thanks for reaching out to Apple Support Communities.
Kind Regards,
Pedro. -
Error when upgrade Oracle client 9.2.0.5.0 to 9.2.0.5.3
Hi all,
I'm new with Oracle community so I hope you guys can help me and give me some suggestion with my case.
I got an error when upgrade Oracle client 9.2.0.5.0 to 9.2.0.5.3
I tried many times but can’t do upgrade successfully
This the error message I got when doing the job:
[ http://picasaweb.google.com/hoagao84/Oracle#5443442931867670386]
Appreciate your help.
Log files:
Command arguments are: apply
OPatch version is: 1.0.0.0.48
Using ORACLE_HOME/oui to look up oui libs...
Oracle Home = d:\oracle\ora92
Location of Oracle Inventory = D:\oracle\ora92\inventory
Oracle Universal Installer shared library = D:\oracle\ora92\oui\lib\win32\oraInstaller.dll
Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\oracle\ora92\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
Checking if this is a RAC system...
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;.:D:\oracle\ora92\jlib\srvm.jar" opatch/O2O "d:\oracle\ora92" "D:\oracle\ora92\oui" opatch.pl 1.0.0.0.48"
Result:
output to OPatch:
IS_CLUSTER=0
CHECK_CLUSTER=1
NODE_LIST=NULL
NODE_COUNT=0
LOCAL_NODE=NULL
IS_CFS=0
RAC_CODE=0
HOME_INDEX=1
This is not a RAC system
Interim Patch ID: 3738339
Checking the patch inventory.
Component Name: oracle.rdbms
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.rdbms_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.oracore_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.xdk_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.dbjava_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.java.javavm.javatools
Component Version: 9.2.0.5.0
Component Name: oracle.cartridges.context
Component Version: 9.2.0.5.0
Component Name: oracle.cartridges.locator
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.net_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.ldap_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.emprod.oemagent.base_oemagent
Component Version: 9.2.0.5.0
Component Name: oracle.isearch.is_common
Component Version: 9.2.0.5.0
Component Name: oracle.options.olap.cwmlite
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.nlsrtl_rsf
Component Version: 9.2.0.5.0
Bugs fixed by this patch 3738339:
3741539 : LOGICAL STANDBY FAILS ORA-1422 MERGING PARTITIONS WITH LOB COLUMN
2800494 : KCBZIB XHINT FORCES SINGLE BLOCK READS INADVERTENTLY FOR SINGLE INSTANCE
3239873 : EXTREMELY HIGH PARSING TIMES WITH AND BETWEEN IN ORACLE 9.2.0
2918138 : ORA-600 (KOHDTF048) WHEN USING PIPELINED PL/SQL TABLE FUNCTIONS
3575743 : 2004-S144E
3554319 : APPSST; ORA-00600 [KQLUDP2] RUN DURING APPS UPGRADE
3666502 : ORA-00600 [1236] RANDOMLY OCCURING
3752406 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5 FOR BUGS LISTED BELOW
3528282 : 2004S075E
3412818 : REPEATED MESSAGES IN LGWR TRACE
2690205 : 2003-S190E
3543125 : 2004-S089E
3571233 : 2004-S141E
3458446 : 2004S059E
2810394 : LNXN2PD RETURNS SCALE OF 42 WHEN COVERTING ORACLE NUMBER 0. TO PACKED
3323435 : 2003-S126E
3356103 : ORA-600 [OPIBND0; OACCSID] IN PARALLEL QUERY SERVER P001 EXECUTING OLAP QUERY
3668224 : CBO CALCULATE LOWER CMPTD CDN AND LEADS TO BAD EXECUTION PLAN.
3492040 : ORA-600 [KGHFRF1] SELECTING FROM V$LOGMNR_CONTENTS
3150750 : SM; (DBMS_STATS/AUTO_SAMPLE_SIZE) ESTIMATED NDV IS WRONG WITH HIGH SKEWS
3566469 : 2004-S138E
3320622 : 2003-S191E
3749394 : SCORE() FOR FUZZY TEXT OPERATOR DIFFERENT FOR FUNCTIONAL VERSUS INDEX ACCESS
3609791 : PSR 9.2.0.5.0 BREAKS CALL DB2 STORED PROCEDURE WITH DECIMAL PARM. SQLCODE -310
3698501 : CGS/IMR GENERATES SAME SEQ/INCARNATION NUMBER AFTER RECONFIG
3668572 : ORA-979 WHEN CURSOR_SHARING=FORCE OR SIMILAR
3179637 : UNABLE TO CREATE AN ORACLECONTEXT ON AD UNDER A CHILD DOMAIN
3571226 : 2004-S140E
3240280 : JOBS SUDDENLY STOP ALTHOUGH NEXT_DATE <= SYSDATE
2964252 : LPX-00252 WHEN PARSING VALID XML / DTD FILE
3617519 : TRANSFORMATION FAILING WITH ORA-932 INCONSISTENT DATATYPE
3172282 : ORACLE CORE DUMPS WHEN TRY TO LIST ALL ACES FOR A SPECIFIC ACL
3637624 : WRONG RESULTS WITH DISTINCT COUNT AND UNNESTED EXISTS SUBQUERY
3542588 : SAME EVENT 38041 USED FOR BUG FIXES 3444115 AND 3131551
3358490 : ORA-00600 [KQSCCCK;1],[],[],[],[],[],[],[]
3177513 : WRONG PLAN - JOIN NOT AVOIDED USING BITMAP JOIN INDEX IF UNIQUE INDEX TOO
3509265 : SHUTDOWN DID NOT COMPLETE WITH WAITING FOR INSTANCES TO LEAVE; 2
3516951 : BAD EXECUTION PLAN WITH MERGE JOIN CARTESIAN IN TEMP TABLE
2954891 : ORA-600 KJMXMPM;DIFFUS], [990307644], [990307644], [3304659678]
3388633 : LOGICAL STANDBY APPLY STOPPED WITH ORA-00600; [17090]
3371796 : EXPLAIN PLAN HANGS ON KKORMINL
3622875 : ORA-1499 AND ANALYZE TABLE VALIDATE STRUCTURE CASCADE ONLINE
3412136 : BAD EXECUTION WITH MERGE JOIN CARTESIAN IN ORACLE 9.2.0.4 AND MERGEFIX 3363655
3540576 : 2004-S083E
3575747 : 2004-S145E
3566813 : CTAS WITH UNION ALL AND ORDER BY RESULTS IN ORA-3113
3811906 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5
2824035 : FXD; ORA-22921 CAUSING 4 DIFS IN LRGXG2.
3354470 : 2003-S195E
3518909 : UGA MEMORY NOT RELEASED AFTER USING XMLPARSER
3617042 : BAD PLAN FOR SCH-XMLTYPE BASED WITH COLLECTIONS MAPPED TO OCT
3583686 : MEMORY ALLOCATION ERROR DURING SPATIAL QUERY
3597640 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5.0
3559212 : WRONG RESULTS RETURNED WITH 9.2.0.4 AND CBO
3625370 : CGS/IMR RECONFIGURATION GOT HUNG DURING A NEW MEMBER JOINING
3475932 : CROSS INSTANCE ARCHIVE LOG NOT GENERATED REMOTELY
3635177 : PSRC; ORA-7445 [KXCCUIN] POSSIBLE FROM DML
3430832 : ORA-600 [25012] AFTER CREATE OF INDEX ONLINE PARALLEL ON PART TABLE
2338704 : FXD; 1; QUERIES ON COLLECTIONS STORED IN OUT-OF-LINE TABLES ARE NOT VIEW MERGED
3253770 : 9I-GSI-CRITICAL PROGRAMS TIME OUT WAITING FOR LIBRARY CACHE PIN
Reading patch XML files and doing sanity checks.
Read the command to action file map.
Performing initial safety check.
Checking active processes:
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;." opatch/CheckConflict "D:\oracle\ora92\oui" "d:\oracle\ora92" opatch.pl 1.0.0.0.48 3738339 "3253770 2338704 3430832 3635177 3475932 3625370 3559212 3597640 3583686 3617042 3518909 3354470 2824035 3811906 3566813 3575747 3540576 3412136 3622875 3371796 3388633 2954891 3516951 3509265 3177513 3358490 3542588 3637624 3172282 3617519 2964252 3240280 3571226 3179637 3668572 3698501 3609791 3749394 3320622 3566469 3150750 3492040 3668224 3356103 3323435 2810394 3458446 3571233 3543125 2690205 3412818 3528282 3752406 3666502 3554319 3575743 2918138 3239873 2800494 3741539 " C:\TEMP\patch92053\3738339\etc\config\actions"
Result:
d:\oracle\ora92\opatch\opatch.pl version: 1.0.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
Error in executing Java program to check conflict
ERROR: OPatch failed during pre-reqs check.This is all the message when I run command in CMD prompt.
C:\temp\patch92053\3738339\perl d:\oracle\ora92\opatch\opatch.pl apply
Opatch Version 1.0.0.0.48
Perl Version 5.008007
Oracle Home = d:\oracle\ora92
Location of Oracle Inventory = D:\oracle\ora92\inventory
Oracle Universal Installer shared library = D:\Oracle\ora92\oui\lib\win32\oraInstaller.dll
Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
Location of oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\Oracle\ora92\oui
Require Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
The filename, directory name, or volume label syntax is incorrect.
D:\oracle\ora92\opatch\opatch.pl version 1.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved
Error in executing Java program to check conflict
Error: Opatch failed during pre-reqs check.
Maybe you are looking for
-
Upload of purchase order details using LSMW
Hi friends, I encountered a problem while uploading purchase order details using LSMW . in the field mapping I could not able to fine the field TCODE. as a result I could not assign the transaction code ME21. could you please suggest me a solution.
-
Changed computer platforms and want to sync with itunes on my new mac
I have had an iphone for about 8 months and had a Dell pc which I used to sync the phone with itunes. Just purchased my imac and have been trying to transfer my iphone contacts, addresses, music, photos, etc and my ipod music to the mac computer itun
-
Data synchronization between two offices
Hi everyone, After building a database for our growing company, we have a problem with our data and its synchronization. Our company has a rather small, but growing, book warehouse and sells books online. We have been able to deal with orders and sto
-
Yesterday I was able to take photos but around 9pm last night my rear camera stop working. I have reseted my phone and have also restored it and the camera still is not working. Also I have deleted all apps that can have access to the camera and i ha
-
Installed ROVE MOBILE VIEWER: what is the device password????????????
installed the above program and when i go to hook my usb to my blackberry it asks me on this program to input the device password.....not sure what its looking for because i don't use a password on my blackberry......has anyone else used this program