Panning issues and seemingly random loss of all audio. ***.

i've been using logic for a few years now, and i just created a new project exactly as i've done about 30+ times.... only for some reason none of the pan settings on the individual tracks are working.  the pan dial looks just like it normally does, except everything is mono, straight down the gorramn middle.  the one track that will allow panning is the output 1-2 track (and probably the master, although i didn't really mess with that one), but i don't think that having the entire audio field set slightly to the side will make this sound very great.
also, i'm losing all audio for what seems an awful lot like no reason at all.  i press play and i can see everything moving as it should. each channel is doing it's thing and seems to be receiving, processing, and sending a signal, but i'm getting nothing in the headset.  i had to restart logic to regain audio.
i appreciate any and all help, and i realize that the fault probably lies in my court as usual. 
thanks

@pancenter - nope. that is still checked.
@chorleyman - out 1-2 is still in stereo, and now i've switched all the individual tracks to stereo just to be sure, but it doesn't seem to be helping.  let me describe my project a bit more.... i've got six guitar tracks, and all of them being bused to an aux.  that aux won't pan either, although if i hard pan it L or R and then hard pan an individual guitar track in the opposite direction, i hear nothing from that track.
i've got one vox track bused to another aux. same story there.
and i've also got two software instruments (a kick and a snare) that go straight to out1-2, and those won't pan either.
let's see... other equipment... not a very extensive list.  for recording i used a usb guitar cable which i don't have plugged in for the mixdown, although the panning issues began before i unplugged that.
other than that i have some headphones plugged into the headphone jack on the mac.
regarding the loss of audio, i've gotten this message a few times, although it didn't pop up the first couple times i lost audio so i'm not sure the answer lies here:
Error while trying to synchronize Audio and MIDI.
Sample Rate 42098 recognized.
Check conflict between Logic Express and external device.
thanks to both of you for responding!

Similar Messages

  • I changed my ID due to an email accessibility issue and I lost access to all my purchased music for the last few years.  Been browsing through the support area and it seems like everyone is saying I will have to rebuy everything.  Is this really true?

    I changed my ID due to an email accessibility issue and I lost access to all my purchased music for the last few years.  Been browsing through the support area and it seems like everyone is saying I will have to rebuy everything.  Is this really true? 
    Apple has to be more user friendly than to let something like this happen, right?

    Did you change the ID, or did you create a new Apple ID? If you had simply changed the ID then what I suggested above should work as the ID itself is the same (even though the name of the ID - the address - has changed).
    However if you created a new ID, logged in with that, and purchased items on it, then you have two separate IDs each with purchased associated with them. You say that you can't log in to the original account with the 'alternate' email - have you tried logging in with the original email address? It doesn't matter if it doesn't actually work to receive mail, as far as logging in is concerned it's just a text string.

  • HT1414 I attempted to update my iphone 3 through I tunes - I think I did a back up on my pc - I am now unable to use the phone at all - it cannot be turned off and seems to be syncing all the time, even when it is not connected to itunes.

    I attempted to update my iphone 3 using itunes.  I'm not certain but I believe I did a backup on my pc first.  I am now unable to use the phone at all - the slide bar won't move and I have a camera icon next to the slide bar which is not responsive.  I have tried to sync and even left the phone connected to the pc overnight. The phone is going flat within a couple of hours and won't stop beeping every few seconds and seems to be syncing all the time, even when disconnected from pc.  I am fearful that I have lost all my contacts - nothing is working - can anyone help - please?

    Try resetting it if you can: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release.  If you can't, try to connect it to iTunes, go to the Summary tab of your sync settings and click Restore to restore it.  If that doesn't work you'll have to force it into recovery mode to restore it as outlined here: http://support.apple.com/kb/ht1808.
    You can check in iTune to see if you have a backup.  They are listed in iTunes>Preferences>Devices.  However, the backup may not bring your contacts back as contacts are only backed up as necessary to preserve the recent call and call favorites lists.

  • HT1766 I had to reset my settings on my iphone4 and seem to have lost all the pictures on my camera roll, how can I restore them

    I had to reset my settings on my iPhone, and seem to have lost all the pictures do my camera roll, how can I restore them

    restore from your backup.  IF you don't have a backup then your pics are gone.
    If you import your pics to your PC - you can use itunes to sync it back to your phone.

  • How do I get in touch with a live person (support) : I had an issue and were very close but all over sudden we were disconnected: so frustrating, why is it so difficult to chat with somebody ?

    where can I get back in that chatroom, please ?
    I don't find it back
    I'm here for almost 1,5 hour, and still no solution
    Aquib: Hello. Welcome to Adobe Technical Support.
    Aquib: Hi,annemie.
    annemie: Er is geen programma ingesteld om de URL 'aam://SAPCode=ILST?productVersion=18.0?passPhrase=lcvJXh/BPzsso1eyQ7W2kqJndPYbTbu1Oa/UOm 6WJEjJ+6W3FmoRYXDL/oQlTxpAfoUlXJZue8M2/1KdmWJt8BSMNgftZubNJjpdxNu9qW53gQfkX6l9fndjoZkO3Pep rfAKNyFH4Rq0MG2YWlRRse+3Mh+sIA9E77fT1V+myms=' te openen.
    annemie: hello
    annemie: this is what I get when I try to download the trial version of illustrator
    annemie: doing that for photoshop, some months ago, was not a problem
    annemie: This means: there is no programme installed to open the URL ....
    annemie: I must say that I deleted the software of the CC that I downloaded before to make make free space on my HD of this notebook
    annemie: this pop-up says: "choos a program" or "dismiss" or "search in App Store"
    annemie: what should I do ?
    annemie: I already searched on google, but can not find anything like this remark about "there is no program installed to open the URL ...."
    Aquib: I understand that you get error when you try to download of the trail version of Illustrator you are getting error on your Mac OS X. is that right?
    annemie: THAT's right
    annemie: with photoshop cc it wasn't a problem
    annemie: but in the meantime I deleted the Creative Cloud in "programmes"
    annemie: probably I didn't do that in a proper way ?
    Aquib: Thank you for confirming I will be glad to help you.
    Aquib: Anneime, please try using different browser.
    annemie: like which browser ? can you give an example ?
    annemie: i have no idea
    Aquib: Chrome or firefox.
    annemie: okay
    annemie: Nothing for mac, when it comes to firefox: can I try a little more, do you have the time ?
    Aquib: Sure, I can provide you the link to download the firefox.
    annemie: sorry, didn't see this in time...
    annemie: i'm downloading and installing chrome now, is that okay ?
    Aquib: Okay.
    annemie: the firefox links don't work: i always get redirected to windows platforms
    Aquib: Please, try in chrome.
    annemie: I downloaded it, but cannot find it back
    annemie: why do they make it so difficult ?
    Aquib: Annemie, please look in the downloads folder.
    annemie: I get a popup window with the logo of chrome and the "programs" map with an arrow
    annemie: I looked in the downloads folder, and a have it installed
    Aquib: Please click on it.
    Aquib: And run it.
    annemie: and than I get that pop-up window with the map (programs) and the logo of chrome, so I open that one but cannot find it back
    annemie: I did : I click on it, it runs, and then I have that pop-up window : not clickable
    annemie: okay, I tried again and it's there
    annemie: the ogo of chrome is in the doch
    Aquib: Just to confirm are you able to launch the chrome?
    annemie: is installing right now
    Aquib: Great!.
    annemie: okay, and what now ?
    Aquib: http://www.adobe.com/products/illustrator.html?promoid=KFOHV
    Aquib: please go to above link using chrome.
    Aquib: there select trail version.
    Aquib: Annemie, did you download the trail version/
    You are not currently connected to a chat representative.
    You are not currently connected to a chat representative.
    You are not currently connected to a chat representative.

    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

  • BB DM for Mac -- Calendar Syncing issues and now no sync at all

    I have a Bold 9000.  Was beginnning to experience frequent errors with PocketMac so went to BB to look for upgrades.  Downloaded new DM for mac -- PocketMac having been eliminated and assuming that BB would not post downloads with major bugs.  Installed DM, set up sync.  Softward told me there was insufficient memory for my iTunes playlist (already on my phone with PocketMac) but I sync'd anyway (figuring that if I couldn't get music, that was the least of my worries -- should have been my first clue).  Sync required me to turn on iSync to convert Entourage calendar entries to iCal (which I do not use, but which BB DM requires).  Although Bold, Entourage and iCal were all set to Pacific Time Zone -- calendar entries from Entourage moved 7 hours forward in iCal and on BB.  After several hours of attempted fixes, I uninstalled BB DM and attempted to reinstall PocketMac (by retrieving software in my backup files because it is no longer available for free download on BB) only to learn that the uninstall evidently left PocketMac with an inability to recognize my phone.  NOw I can't sync at all and I'm left with a screwed up calendar to boot.
    What is BB going to do about this mess?  Incidentally, my music is still all on the phone (despite deselecting the original playlist on the first sync when the software warned there was insufficient memory) with random duplicates of some of the songs.

    I just fixed the 7 hour sync problem.  The time zone on my Blackberry was set to Casablanca!  Once I changed it to the correct time zone and resynced my calendar everything showed up in the right place.

  • Why does my firefox intermittently (and seemingly randomly) behave as though my control key is stuck on, even though my keyboard behaves normally in every other program? AND it will also randomly change my keyboard mapping to an international one.

    I will be using firefox, and for some reason, it behaves as though control key is being held down. If i use the mouse wheel, the page zooms. If I press the letter 'o', the "Open file..." dialog opens. But I'm not holding control. If, while this is happening, I switch to another application like Notepad, it behaves normally. But then I'll go back to firefox and the problem is still there. It seems to randomly start and stop.
    Also, in a possibly related problem, my keyboard mapping will change from my default US to some other foreign mapping where shift-6 incorrectly outputs '?' instead of '^', for example.

    I will be using firefox, and for some reason, it behaves as though control key is being held down. If i use the mouse wheel, the page zooms. If I press the letter 'o', the "Open file..." dialog opens. But I'm not holding control. If, while this is happening, I switch to another application like Notepad, it behaves normally. But then I'll go back to firefox and the problem is still there. It seems to randomly start and stop.
    Also, in a possibly related problem, my keyboard mapping will change from my default US to some other foreign mapping where shift-6 incorrectly outputs '?' instead of '^', for example.

  • How can I get apple to warranty my iPod touch 4th gen? It has always had issues and seems to be a lost cause. Will not connect to wi-fi. It also has cracked screen, but that is not the issue.

    It has a cracked screen also but that is not the issue. I am willing to live with the screen

    Unfortunately, ANY signs of 'neglect or damage' automatically become the cause of any issues you're having. As in it doesn't matter if your screen was flickering before it was dropped, when they see the dent or cracked screen, that screen flicker was caused by the drop. Because they  have no way to know if you are telling the truth (it's nothing personal, they just literally dont' know) so any signs of damage become the reason for your issue. The only way out of that is if you had taken in your iPad and, even if you didn't get it replaced, an apple employee can have documented that yes, that issue existed before the drop.
    It's not fun, I know, but that's just how it is. Any signs of 'neglect or damage' and that 'neglect or damage' is the cause of your issues.

  • Using the icons on the bottom of my iPad mini screen I have always been able to check email and surf the net using Safari as well as storing all my photographs.  Suddenly these boxes are empty and I cannot do anything and seem to have lost all of my photo

    I have owned my iPad Mini for 9 months now and am still a novice great granny!  Today I cannot use Safari as it has just gone blank. I cannot retrieve emails, again the screen is blank and all my photographs have disappeared.  Can anyone help me to retrieve this.

    Reset your iPad and see if that fixes this.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I've just upgraded Aperture and seem to have lost all the folders and albums. How can I retrieve them?

    When I opened Aperture a dialogue box appeared suggesting I upgrade. The upgrade was done, and now all the folders and albums previously in Aperture have disappeared. How can I retrieve them?

    . The upgrade was done, and now all the folders and albums previously in Aperture have disappeared. How can I retrieve them?
    When you opened your new Version of Aperture you probably created a new, empty  Aperture Library.
    Do you remember where your original Aperture Library is located? Usually it resides in your "Pictures" folder, and is named something.aplibrary. If you do not remember where it is, search with Spotlight for ".aplibrary".
    Quit Aperture, if it is running, then select your old Aperture Library and double click it to open it. This will launch Aperture on your correct library, and you should see all your projects and albums again.
    Regards
    Léonie

  • I tried to restart my iPad2 beacuse of email issues and now the screen is all black, I can't open it anymore...

    My screen is all black except that white wainting sign... what should I do?  Pressing down the sleep/start button doesn't change anything.

    Have you tried a reset: hold the sleep/power button and home button, ignore the slider, and let it restart.
    Have you tried connecting to iTunes and see if it recognizes and can reset, not retore unless all else fails.

  • Not Connecting to Wired Network and Forcing the loss of all Connections on the Home Network

    Just got a new G550 laptop  w/Win 7 OS. Tried to connect to wired router and got message "network cable not connected". Recycled laptop and router and came up with router connected to the laptop. Same message after search and identify steps finished. I then noticed I lost connection to the net/router with my other home networked units as well! Tried another cable, same results along with losing the entire home network connection. Disconnected the G550 from home network, via the cable, and the home network reconnected without any intervention. Tried another reboot directly connected to the cable modem, no go there either!
      I also rebooted with the wireless search shutoff and got the same problems as on the wired attempt. Thought it might have been the NIC card so I exchanged the system back at the store.  Sorry, same problem!! 

    I have a very similar problem... New Lenovo G550, running Vista Home Premium 64-bit. Right from the start it causes my TrendNet TEW-432BRP router to crash every 10 seconds. I bought a new DLink WBR-1310 and experience the same problem. Connecting to either router through either a wireless connection or a LAN cable connection causes the router to crash every 10 seconds. The router crashes, reboots, establishes a connection with the laptop, communication starts and then the router crashes again.
    I am looking for help.

  • Often with 2 or 3 tabs/websites open, the tab does not have the X on the right side to close it. I have to right clock and hit Close Tab. Seems random. How can I assure all tabs have the X?

    Sometimes when I have 2 or more websites open, the tabs for them do not have the"X" on the right end that I can click to close them. Others right next to it may have the X or not - it seems random. The only way to close the x-less tabs is to right click and select Close tab. How do I tweak it so there are always X's? The only relevant add-on I can think of is Colorful Tabs, and I have the latest version of it.

    If you are not new to browsers, you would probably prefer the single "X" at the far right of the tabs bar to close the active tab, but in any case your choices are described for the configuration option of '''browser.tabs.closeButtons''', see
    * http://kb.mozillazine.org/Browser.tabs.closeButtons
    * Tabbed Browsing in Firefox<br>http://dmcritchie.mvps.org/firefox/tabs.htm
    * Tabs configuration, extracted from About:config entries - MozillaZine Knowledge Base<br>http://dmcritchie.mvps.org/firefox/tabs_config.htm
    '''More information on configuration variables''' if you are not already familiar with '''about:config''' is available in
    [http://kb.mozillazine.org/About:config_entries about:config entries] and for users not familiar with the process there is [http://kb.mozillazine.org/About:config about:config] (How to change).

  • Seemingly random intermittent packet loss

    Hello! Over the past month or so I've been experiencing intermittent packet loss.My internet will be completely find for anywhere between five minutes and 12 hours, and then suddenly I begin experiencing packet loss (sometimes to the point of total disconnection) for anywhere between 5 seconds and 30 minutes. It is seemingly random because it has happened during any time of the day and during any weather condition. It also does not seem to be related to one hop (if my understanding of pingplotter is correct)Here are a few examples of when the issue is occuring:http://i.imgur.com/cuGayms.pnghttp://i.imgur.com/jjt2K6Y.pnghttp://i.imgur.com/48DFCti.png Things I have tried I noticed that in my modem diagnostics page my upstream power level was pretty high at 54 dbmv.I removed a splitter that was before the modem and it instantly dropped to the lower 40's.I was hoping this would fix the problem, but the packet loss came back.This morning a particularly bad session of packet loss occurred and I decided to check my modem diagnostics again and discovered the upstream power level had jumped up to the upper 40's, lower 50's again, despite the splitter still being removed. I have also gone through the simple steps of power cycling, resetting everything, checking cables are not loose, etc. I figured I would ask on this forum for any ideas on my next step before consulting with comcast as I know that intermittent problems are nearly impossible for a tech to solve unless you're lucky enough to have the issue occur while the tech is present. Thank you for any help you can give!

    In a self troubleshooting effort to try to obtain better connectivity / more wiggle room, check to see if there are there any excess/unneeded coax cable splitters in the line leading to the modem that can be eliminated/re-configured. Any splitters that remain should be high quality and cable rated for 5-1000 MHz, bi-directional, and no gold colored garbage from Radio Shack, Home Depot, Target, etc. Splitters should be swapped with known to be good / new ones to test.
    If there aren't any unneeded splitters that can be eliminated and if your coax wiring setup can't be reconfigured so that there is a single two way splitter connected directly off of the drop from the street/pole with one port feeding the modem and the other port feeding the rest of the house/equipment with additional splits as needed, and you've checked all the wiring and fittings for integrity and tightness and refresh them by taking them apart then check for and clean off any corrosion / oxidation on the center wire and put them back together again, then perhaps it's best to book a tech visit to investigate and correct.

  • Firefox crashes randomly even with all extensions disabled and new profile, but not in safe mode

    Starting from about 2 weeks ago, Firefox has been crashing. The crashes is seemingly random, but normally happens when many pages/tabs are open. Also, all observed crashes happened in middle of some user operations. If I just leave it open(and loaded), it would never crash even after a long time.
    Also, the crashes would still happen even after ALL extensions are disabled manually. However it doesn't seem to happen in Safe Mode.
    After every crash, in the crash report dialog, the "Details" report would not respond. However I can open the reports using about:crashes.
    Before the crash would happen, sometimes the following ill-behaviors could be observed:
    * Firefox fails to render CJK characters, displaying them as square boxes instead
    * CJK IME(Namely Google Pinyin, an IME for Simplified Chinese) could no longer be activated in Firefox, neither on a webpage element nor on UIs of Firefox itself(i.e. address bar or search bar)
    The following has been tried but no luck:
    * Disable ALL extensions manually
    * Start a new profile
    * Reset Firefox
    * Uninstall/Reinstall Firefox
    * Switch from FX 14 to 15, then to 16 beta

    hello Rainarrow, some other users who have recently updated the graphics driver for their ati hardware (to ati catalyst version 12.8) have reported similar crashes. please try disabling hardware acceleration in firefox > options > advanced > general & see if this resolves the issue of frequent crashes for the moment.

Maybe you are looking for

  • F-44: The Re-document not appear available to do the clearing.

    Hi Experts Hi, We need help to understand what hapen with the consult of vendor XXXXX When we consult this vendor on transaction FK10N we see the information detailed on the attached file. But when I try to do the clearing and try the transaction F-4

  • Adobe PDF printer freezes on my Win 7 x64 with Acrobat XI

    Purchased and running Acrobat XI Standard latest update 11.0.10 on Win 7 Pro x64 (6.1.7601  Service Pack 1), a rather fresh installation (2 months). Adobe's conversion to PDF doesn't work when using the Adobe PDF printer. The printer initiates normal

  • Perspective zoom turns off after restart

    hello i have iphone 5s 8.0.2 and ipadmini 8.0.2 everything worked just fine untill i have upgraded to 8.0 with OTA update option. i Use perspective zoom for background on my lock screen and home screen. but after i reboot my iphone or ipad the zoom f

  • How do I stop the Xfinity Log in page from popping up?

    If I am near a xfinity hot spot, xfinity log in screen pops up on the screen of my iphone whenever I am checking emails or browsing on the internet. I am not subscribed to the service and I have no intention to subscribe either, it's quite annoying,

  • Long delay after issuing commands at prompt

    This has only begun recently, so I assume I've done something wrong but I havn't tinkered that much, so I can't really retrace my steps. At the prompt when I type in certain commands there is a very long delay (10-30 seconds) to load certain things.