Panorama gets little seam after postprecessing in LR
Hi all
Sometimes I get this little seam in a panorama after postprocessing it in LR: http://www.archiviz.ch/download/Bildschirminhalt_erfassen-1.jpg
The seam is exactly at the position where the left and the right border of the panorama gets together.
I stitch the raw images in PTGui, export a 16 Bit Tiff an postprocess it in LR.
How can I avoid this little seam ?
Kind regards
Alain
ssprengel wrote:
I described this method, above, in less detail.
You could save yourself the final PS Edit In step and just crop 2:1 in LR, moving the crop where you want it.
However, if you use PS for the final crop, then after doing the 2:1 crop in PS, place the image side-by-side, again, and fix any slight discontinuity that might still exist with the healing brush, then do another 2:1 crop and save.
Your whole post has changed from yesterday, anyhow we're thinking along the same lines.
LR is not the best choice for making the extended canvas crop, because there's no way to set a "precise" size using pixel dimensions. Even a one (1) pixel error may be visible, which is why I outlined the detailed procedure using PS's crop tool. The results I achieved using a 50% larger canvas size and some heavy LR PV2012 adjustments has shows little tonal difference, except at the extreme right and left edges. As long as the crop is kept away from these edges there should be no visible seam.
Here's a crop of the TIF processed using the above procedure with the right and left ends joined as they would be in a 360 viewer. The seam runs down the middle of the image just to the left of the small bulletin board on the wall. Can you see it?
Here's the whole processed image:
Correction: You can enter the original resolution in pixels (4046x2023) into the LR Crop tool using 'Custom. Using that procedure it should be 100% accurate for this purpose.
Similar Messages
-
Trying to upgrade iPad software to newest version. It downloads but stops while backing up and says not enough space on hard drive to back up if i continue all media on iPad will be lostor deleted. Can I get it back after upgrade by just synching or can I set it to backup to an external drive? Thanks for any help. I only use the laptop for itunes now as it has such little space left.
I would recommend deleting contents off your hard-drive to make space (how much is left..you should be having 15% free as a general practice) and backing up the phone prior to upgrading.
-
I have very strange problem with iphone 3gs. Whenever it gets little hot or exposed to 30 degree or above temperature it losses signals (No service). Whenever it is cooled down the service is back. Whenever I am using Skype or playing game for a while it losses carrier signals and wifi. When it is cooled down afer shutting down the carrier signals and wifi are back. It is for sure problem is with heating, but 30 degree tempeature in Oman is normal and some time it goes upto 50 degrees. I have noticed this has started after I started using substandard charger as I lost my original charger of the phone. Please help!! Thanx.
The specifications define an operating range up to 35 degrees.
-
Getting confirmation mail after sending PO to a supplier
Is there any fuctionalality of getting confirmation mail after the vendor receives a purchase order (output condition is set for the PO medium is external send).If yes, who will get this confirmation mail , the creator of the PO or the buyer of the purchasing group??
A purchase order response (POR) can be created in response to a purchase order (PO) in the Enterprise Buyer System if
· An XML message is received from the vendor in response to a PO or
· It is created manually by a desktop user (for example an purchasing assistant) or a purchaser (professional user)
In both cases, a POR (business object BUS2209) is created and the associated start conditions (predefined and delivered activated) are evaluated, causing different workflows to be started:
For details, check : http://help.sap.com/saphelp_srm40/helpdata/en/45/87a34098022a54e10000000a1550b0/content.htm -
Index is not getting picked even after providing hint
Hi All
The index pk_sku is not getting picked even after providing the hints when executing the query.Please kindly give me such recommendations.I am providing the information.
select * from
(select /*+ index(s pk_sku) */
to_char(t.dstamp, 'YYYYmmDDHH24MI') as sort_1,
t.client_id as CLIENT_ID ,
t.site_id as SITE_ID,
tz.time_zone_name as TIME_ZONE_NAME ,
t.owner_id as OWNER_ID,
t.sku_id as SKU_ID,
t.reason_id as ADJUST_TYPE,
to_char(t.dstamp+tz.diff/24, 'DD/mm/YYYY HH24:MI') as ADJUST_DATETIME,
t.reference_id as RECEIPT_ID,
t.batch_id as BATCH_ID,
t.update_qty as UPDATE_QTY,
t.lock_code as LOCK_CODE,
s.description as SKU_DESCRIPTION
from mv_inventory_transaction t
JOIN timezone tz ON tz.site_id = t.site_id ,
mv_sku s
where t.sku_id= s.sku_id
and t.client_id=s.client_id
and ( :client is null or :client = t.client_id)
and ( :site is null or t.site_id in (:site))
and ( :owner is null or t.owner_id in (:owner))
and t.code= 'Adjustment'
and (t.dstamp+tz.diff/24) between to_date(:dateFrom, 'DD/mm/yyyy') and to_date(:dateTo,'DD/mm/yyyy')+1
and (:sku is null or t.sku_id in (:sku))
UNION ALL
(select /*+ index(s pk_sku) */
to_char(t.dstamp, 'YYYYmmDDHH24MI') as sort_1,
t.client_id as CLIENT_ID ,
t.site_id as SITE_ID,
tz.time_zone_name as TIME_ZONE_NAME ,
t.owner_id as OWNER_ID,
t.sku_id as SKU_ID,
t.reason_id as ADJUST_TYPE,
to_char(t.dstamp+tz.diff/24, 'DD/mm/YYYY HH24:MI') as ADJUST_DATETIME,
t.reference_id as RECEIPT_ID,
t.batch_id as BATCH_ID,
t.update_qty as UPDATE_QTY,
t.lock_code as LOCK_CODE,
s.description as SKU_DESCRIPTION
from mv_inventory_transaction_arch t
JOIN timezone tz ON tz.site_id = t.site_id,
mv_sku s
where t.sku_id= s.sku_id
and t.client_id=s.client_id
and ( :client is null or :client = t.client_id)
and ( :site is null or t.site_id in (:site))
and ( :owner is null or t.owner_id in (:owner))
and t.code= 'Adjustment'
and (t.dstamp+tz.diff/24) between to_date(:dateFrom, 'DD/mm/yyyy') and to_date(:dateTo,'DD/mm/yyyy')+1
and (:sku is null or t.sku_id in (:sku))
order by sort_1,2,3,4,5
version = Release 10.1.0.5.0
SQL> sho parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.1.0.5
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
sho parameter db_file_multiblock_count_read
sho parameter cursor_sharing
SQL> sho parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.1.0.5
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
SQL> sho parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 16
SQL> sho parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACTExplain plan
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 56 | 29736 | 345K (1)| 01:09:07 |
| 1 | SORT ORDER BY | | 56 | 29736 | 345K (1)| 01:09:07 |
| 2 | VIEW | | 56 | 29736 | 345K (1)| 01:09:07 |
| 3 | UNION-ALL | | | | | |
| 4 | NESTED LOOPS | | 2 | 984 | 29686 (1)| 00:05:57 |
| 5 | HASH JOIN | | 1 | 326 | 26870 (1)| 00:05:23 |
| 6 | TABLE ACCESS FULL | TIMEZONE | 4 | 88 | 3 (0)| 00:00:01 |
| 7 | VIEW | MV_INVENTORY_TRANSACTION | 25 | 7600 | 26866 (1)| 00:05:23 |
| 8 | UNION-ALL | | | | | |
| 9 | FILTER | | | | | |
| 10 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION | 1 | 67 | 24327 (1)| 00:04:52 |
| 11 | INDEX RANGE SCAN | IDX_CODE_CLIENTID_690 | 79681 | | 518 (1)| 00:00:07 |
| 12 | FILTER | | | | | |
| 13 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION | 24 | 2328 | 2539 (1)| 00:00:31 |
| 14 | INDEX RANGE SCAN | IDX_CODE_646 | 9269 | | 46 (0)| 00:00:01 |
| 15 | VIEW | MV_SKU | 37 | 6142 | 2816 (1)| 00:00:34 |
| 16 | UNION-ALL | | | | | |
| 17 | MAT_VIEW ACCESS FULL | MV_SKU | 335K| 10M| 2535 (1)| 00:00:31 |
| 18 | MAT_VIEW ACCESS FULL | MV_SKU | 37839 | 1699K| 280 (1)| 00:00:04 |
| 19 | NESTED LOOPS | | 54 | 26568 | 315K (1)| 01:03:10 |
| 20 | HASH JOIN | | 1 | 326 | 313K (1)| 01:02:37 |
| 21 | TABLE ACCESS FULL | TIMEZONE | 4 | 88 | 3 (0)| 00:00:01 |
| 22 | VIEW | MV_INVENTORY_TRANSACTION_ARCH | 576 | 171K| 313K (1)| 01:02:37 |
| 23 | UNION-ALL | | | | | |
| 24 | FILTER | | | | | |
| 25 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH | 1 | 72 | 19258 (1)| 00:03:52 |
| 26 | INDEX RANGE SCAN | QUI_IDX_INVTRANS_ARC1 | 36016 | | 287 (1)| 00:00:04 |
| 27 | FILTER | | | | | |
| 28 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH | 575 | 55200 | 293K (1)| 00:58:45 |
| 29 | INDEX RANGE SCAN | QUI_IDX_INVTRANS_ARC1 | 367K| | 3466 (1)| 00:00:42 |
| 30 | VIEW | MV_SKU | 37 | 6142 | 2816 (1)| 00:00:34 |
| 31 | UNION-ALL | | | | | |
| 32 | MAT_VIEW ACCESS FULL | MV_SKU | 335K| 10M| 2535 (1)| 00:00:31 |
| 33 | MAT_VIEW ACCESS FULL | MV_SKU | 37839 | 1699K| 280 (1)| 00:00:04 |
------------------------------------------------------------------------------------------------------------------------when put in sql tuning advisor,It recommended with better plan using indexes
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 56 | 29736 | 340K (1)| 01:08:01 |
| 1 | SORT ORDER BY | | 56 | 29736 | 340K (1)| 01:08:01 |
| 2 | VIEW | | 56 | 29736 | 340K (1)| 01:08:01 |
| 3 | UNION-ALL | | | | | |
| 4 | NESTED LOOPS | | 2 | 848 | 26900 (1)| 00:05:23 |
| 5 | HASH JOIN | | 1 | 326 | 26898 (1)| 00:05:23 |
| 6 | TABLE ACCESS FULL | TIMEZONE | 4 | 88 | 3 (0)| 00:00:01 |
| 7 | VIEW | MV_INVENTORY_TRANSACTION | 25 | 7600 | 26894 (1)| 00:05:23 |
| 8 | UNION-ALL | | | | | |
| 9 | FILTER | | | | | |
| 10 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION | 1 | 67 | 24352 (1)| 00:04:53 |
| 11 | INDEX RANGE SCAN | IDX_CODE_CLIENTID_690 | 79681 | | 518 (1)| 00:00:07 |
| 12 | FILTER | | | | | |
| 13 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION | 24 | 2328 | 2542 (1)| 00:00:31 |
| 14 | INDEX RANGE SCAN | IDX_CODE_646 | 9269 | | 46 (0)| 00:00:01 |
| 15 | VIEW | MV_SKU | 37 | 3626 | 2 (0)| 00:00:01 |
| 16 | UNION-ALL PARTITION | | | | | |
| 17 | MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU | 1 | 34 | 3 (0)| 00:00:01 |
| 18 | INDEX UNIQUE SCAN | PK_SKU | 1 | | 2 (0)| 00:00:01 |
| 19 | MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU | 1 | 46 | 2 (0)| 00:00:01 |
| 20 | INDEX UNIQUE SCAN | PK_SKU | 1 | | 1 (0)| 00:00:01 |
| 21 | NESTED LOOPS | | 54 | 22896 | 313K (1)| 01:02:38 |
| 22 | HASH JOIN | | 1 | 326 | 313K (1)| 01:02:38 |
| 23 | TABLE ACCESS FULL | TIMEZONE | 4 | 88 | 3 (0)| 00:00:01 |
| 24 | VIEW | MV_INVENTORY_TRANSACTION_ARCH | 576 | 171K| 313K (1)| 01:02:38 |
| 25 | UNION-ALL | | | | | |
| 26 | FILTER | | | | | |
| 27 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH | 1 | 72 | 19269 (1)| 00:03:52 |
| 28 | INDEX RANGE SCAN | QUI_IDX_INVTRANS_ARC1 | 36016 | | 287 (1)| 00:00:04 |
| 29 | FILTER | | | | | |
| 30 | MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH | 575 | 55200 | 293K (1)| 00:58:47 |
| 31 | INDEX RANGE SCAN | QUI_IDX_INVTRANS_ARC1 | 367K| | 3466 (1)| 00:00:42 |
| 32 | VIEW | MV_SKU | 37 | 3626 | 2 (0)| 00:00:01 |
| 33 | UNION-ALL PARTITION | | | | | |
| 34 | MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU | 1 | 34 | 3 (0)| 00:00:01 |
| 35 | INDEX UNIQUE SCAN | PK_SKU | 1 | | 2 (0)| 00:00:01 |
| 36 | MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU | 1 | 46 | 2 (0)| 00:00:01 |
| 37 | INDEX UNIQUE SCAN | PK_SKU | 1 | | 1 (0)| 00:00:01 |
------------------------------------------------------------------------------------------------------------------------So ,after checking the recommended plan I tried to execute the query with the hints,even then it is picking up the indexes in the explain plan.So please kindly help in solving the issue
The pk_sku is the index created on client_id and sku_id columns
Thanks
GVriedelme wrote:
My experience is differernt - hints will be followed if the optimizer determines they will be beneficial and not if they will not, including my current project on 11gR2. The example below (unfortunately only 11gR1) disproves your theory, showing the index hint is followed and that the cost increases by a factor of five.
The most common cases of the optimizer apparently ignoring a hint are due to operator error, the hint is not well formed, or cannot be followed. There are a couple of documented cases where a hint will be ignored - first_rows used in CTAS is one.
Jonathan Lewis writes a lot about it on his blog showing that the optimizer always acts on a well formed hint if it is at all possible.
SQL> create table t (n number not null, c varchar2(1000));
Table created.
SQL> insert into t select 1, rpad('x',1000,'x')
2 from dual connect by level <= 50000;
50000 rows created.
SQL> create index t_ix on t (n);
Index created.
SQL> exec dbms_stats.gather_table_stats(user, 't', cascade => true)
PL/SQL procedure successfully completed.
SQL> explain plan for
2 select max(c) from t where n =1;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 2966233522
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 1004 | 1574 (1)| 00:00:19 |
| 1 | SORT AGGREGATE | | 1 | 1004 | | |
|* 2 | TABLE ACCESS FULL| T | 50000 | 47M| 1574 (1)| 00:00:19 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
2 - filter("N"=1)
14 rows selected.
SQL> explain plan for
2 select /*+ index (t t_ix) */ max(c) from t where n = 1;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 3231292748
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 1004 | 7244 (1)| 00:01:27 |
| 1 | SORT AGGREGATE | | 1 | 1004 | | |
| 2 | TABLE ACCESS BY INDEX ROWID| T | 50000 | 47M| 7244 (1)| 00:01:27 |
|* 3 | INDEX RANGE SCAN | T_IX | 50000 | | 98 (0)| 00:00:02 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
3 - access("N"=1)
15 rows selected. -
I keep getting this message after closing Firefox and attempt to reopen-Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.
See:
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Profile_in_use -
why am I still getting this message after logging in? "This computer is no longer authorized for apps that are installed on the iPhone “*************s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?" - after I have logged in and get the message that the computer is already authorized!!!?? - and then the above message pops up again?
Click here and follow the instructions.
(71175) -
I have the Itunes match but am getting radio ads after upgrading. How do I get the Itunes radio to play ad-free again?
Hello fortcoins,
It may help to turn iTunes Match off, then back on.
Windows: While holding down the shift key, choose Store > Turn Off iTunes Match.
Turn iTunes Match on by selecting Store > Turn On iTunes Match.
How to troubleshoot iTunes Match
http://support.apple.com/en-us/TS4054
Cheers,
Allen -
I cannot find my photos or contacts. Help how do I get them back after a iclound backup was done due to needed to get a new iphone. HELP
I believe I had leopard and I was having issues getting errors of system not being supported. I contacted Apple and was advised I needed to upgrade to snow leopard. My laptop is from 2009 and I haven't done anything to it till now. The apple rep also stated I should do a fresh install when putting snow leopard on so my laptop would run faster. Apple rep told me to get a external hard drive to put my info on it so the fresh install would reset everything to like it was brand new. I had someone help me with getting everything on the EHD.. doing the right format and such and then once that was done I put in the CD for snow leopard and hit install. Which brings me to now, with everything but my pictures. I have the EHD plugged in... now what? What do I do? I have looked in the EHD in iphoto and it was all standard images *not my pictures but images of a check mark or an arrow again not actual pictures. I don't see a folder pictures and i looked for images and found nothing. I have Applications, Included Free Designs, Library, System, User Guides and Information and Users, those are my options and non of those have a "pictures"
I have iPhoto '09 version 8.1.2 & Mac OS X version 10.6.3 -
Getting blank space after paragraph in RTF template
Hi there,
Thanks so much for all your help for your help.
I am running into one issue in RTF template, wanted to share with you to get any input on this. I have paragraph and Idid put in table at the top and there is xml tag that gives names after that paragraph. but I get blank spaces after paragraph and it shows names from that xml tag.
I tried to remove spaces by deleting between pargraph and xml tag<name> , still i get blank page between paragraph text and names.
Can anyone help me or point me to get it resolved that would be greatly appreciated.Thanks Varma for your prompt response and your time on this. I am still trying to get any other options to get this done as that is the requirement and with that blank page looks not fully satisfied for users and am trying any other ways to do implement this..
That's the reason I thought of putting this post again to get more inputs that may have.
Can anyone put some light onthis.
Thanks a lot..
sk -
I got my 2nd iphone 5s brand you, it s getting very hot after 10 min of usage
I got my 2nd iphone 5s brand you, it s getting very hot after 10 min of usage
It means take it back to where you bought it from. If you don't want to do that you'll have to be more specific like how long you've had the phone and how you are using the phone when it gets hot. That kind of information. The more we know about the phone the easier it is to diagnose and offer suggestions.
-
Get row id after EJB create method.
Hi,
does any one know how to get an id of new created by CMP ejb row? When I create new object it's id is 0, when i call ejb create it creates new row in DB and crates new ID by increasing the old one, but how can I get this new ID after create has finished?
Now I have to look equals by some fields object in DB after creation, looks ugly.So here is my CMP :
* @ejb.bean name="Dividend"
* type="CMP"
* view-type="local"
* primkey-field="id"
* schema="dividends"
* cmp-version="2.x"
* @ejb.value-object name="Dividend"
* match="*"
* @ejb.transaction type="Required"
* @ejb.persistence table-name="dividends"
* @ejb.finder signature="Collection findAll()"
* query="SELECT OBJECT(d) FROM dividends d"
* @jboss.query signature="Collection findAll()"
* @ejb.finder signature="Dividend findByActivityId(java.lang.Integer activityId)"
* query="SELECT OBJECT(d) FROM dividends d WHERE d.activityId = ?1"
* @jboss.query signature="Dividend findByActivityId(java.lang.Integer activityId)"
* strategy="on-load"
* @jboss.persistence create-table="false"
* remove-table="false"
* datasource="java:/ChronimDS"
* datasource-mapping="mySQL"
public abstract class DividendBean implements EntityBean {
//~ Methods ----------------------------------------------------------------
//==========================================
// Business methods
//==========================================
* @ejb.interface-method
public Dividend getDividend() {
Dividend dividend = new Dividend();
dividend.setId(this.getId());
dividend.setActivityId(this.getActivityId());
dividend.setLower(this.getIsLower());
dividend.setLowerAmount(this.getLowerAmount());
return dividend;
* @ejb.interface-method
public void setDividend(Dividend dividend) {
this.setActivityId(dividend.getActivityId());
this.setIsLower(dividend.isLower());
this.setLowerAmount(dividend.getLowerAmount());
//==========================================
// CMP fields
//==========================================
* @ejb.pk-field
* @ejb.persistence column-name="id"
* jdbc-type="INTEGER"
* sql-type="INTEGER"
* @ejb.interface-method
* @ejb.transaction type="NotSupported"
public abstract Integer getId();
public abstract void setId(Integer id);
* @ejb.persistence column-name="activityId"
* jdbc-type="INTEGER"
* sql-type="INTEGER"
public abstract Integer getActivityId();
public abstract void setActivityId(Integer activityId);
* @ejb.persistence column-name="isLower"
* jdbc-type="TINYINT"
* sql-type="TINYINT"
public abstract boolean getIsLower();
public abstract void setIsLower(boolean isLower);
* @ejb.persistence column-name="lowerAmount"
* jdbc-type="INTEGER"
* sql-type="INTEGER"
public abstract Integer getLowerAmount();
public abstract void setLowerAmount(Integer lowerAmount);
//==========================================
// EJB callbacks
//==========================================
* @ejb.create-method
public Integer ejbCreate(Dividend dividend)
throws CreateException {
this.setId(dividend.getId());
this.setIsLower(dividend.isLower());
this.setLowerAmount(dividend.getLowerAmount());
this.setActivityId(dividend.getActivityId());
return null;
public void ejbPostCreate(Dividend dividend)
throws CreateException {
// EntityBean (empty) implementation
public void setEntityContext(javax.ejb.EntityContext ec) {
public void unsetEntityContext() {
public void ejbLoad() {
public void ejbStore() {
public void ejbActivate() {
public void ejbPassivate() {
public void ejbRemove() {
As you can see I'm using xdoclets.
Suppose I need to create new row of this object :
Dividend d = new Dividend();
// fill dividend by values here but do not set it's id it is 0 before creation
// SQL server will set it automaticly
Object ref = context.lookup("DividendLocal");
DividendLocalHome dividendLocal = (DividendLocalHome) ref;
dividendLocal.create(dividend)
I create new row of dividend in my DB and want to get an ID of the new created row, I thought that dividend object will get this ID after creation automaticly, but no, his id is 0.
so here id will be 0 :
dividendLocal.create(dividend);
int id = dividend.getId(); // 0
and if I write this
dividendLocal.create(dividend).getId();
I get :
2007-06-25 14:44:02,384 ERROR [org.jboss.ejb.plugins.LogInterceptor]
EJBException in method: public abstract java.lang.Integer
com.xxx.xxx.ejb.SessionFacade.createDividend(
xxx.xxx.model.Contract) throws java.rmi.RemoteException:
javax.ejb.NoSuchObjectLocalException: Entity not found: primaryKey=0 -
My iPhone (iPhone 5S) getting green display after one second going to switch off then automatically ON during FaceTime call. My OS version now 7.0.4. I think recent update actually to fix the above issue but still continues.
Similar issue Andrew. After installing 8.0, the IOS deleted 225 songs from one of my playlists, and I'm still "recalling" songs that are no longer in my Music Library. Fortunately, although the playlist of 235 had only 6 songs left on it ( on my Mac), the Playlist was not erased from my I -Phone. I was able to recreate the Playlist on my Mac, using the intact playlist on my phone. When I synched however, I was back to square one. I went to the Apple store, and I had to reset the phone . We also downloaded IOS 8.02. They saved my playlist in the Cloud, deleted it from my Mac, then synched it. Lo and behold, the playlist I recreated on my Mac, synched to my I Phone. After the reset, I had like 11GB of free space. (Its been 5 days since the "reset" and the number of GBs fluctuates from day to day !!)
When I got home from the Apple store I spent after hours reinstalling all the apps, synchng the phone to the Bluetooth in my car ( you know the rest of the saga) , I purchased a song from I Tunes. I "drag and dropped" it into a Playlist, and synched. Didn't work. Song shows in "Recently Added", but the drag and drop feature doesn't work. Bottom line, I'm not willing to "reset" my phone every time I add a song ! I've tried any number of fixes posted to this support community, but none have worked for me.
Furthermore, it took me 3 hours to get the phone re-synched to the Bluetooth system in my car. However every time I connect to "Bluetooth Audio", the system needs to "find" and "reconnect to" my phone. If you ( or anyone else ) finds something that might work for both the music synch and /or the Bluetooth, I'd appreciate your input.
Thanks, Lorenzo -
anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999.. many thanks :-)
They show in the camera roll, just not your computer?
Have you checked every folder that is in the DCIM folder? -
I keep getting Error 7 after I have reinstalled iTunes. What should I do?
I keep getting Error 7 after I have re installed iTunes. What should I do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Maybe you are looking for
-
I just got a new nano and it said I needed the newest version to synch up so I downloaded the latest itunes. Everything went fine until I clicked on the icon and nothing happened. Then I clicked on it again, still nothing. I uninstalled everything, a
-
AirPlay video streaming problem
Hi, Whenever I stream a video to Apple TV from either an iPad or iPhone (via AirPlay) the picture is slightly zoomed in on my television. This problem seems to occur on all video apps, e.g. YouTube etc., and I have experienced it on both the 720p and
-
HT1414 I am unable to restore my device as my ipad has been disabled.
I am unable to restore my device as my ipad has been disabled. This was caused by enetering the incorrect security code too many times. However, i know that security code entered was in fact correct so do not understand why it would not unlock.
-
I have this error pop up while almost done installing, "An error occurred during the installation of assemble 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.4053",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="amd64"". HRESULT: 0x8007
-
DBCA step 12 hangs in 74% after ora-28010
Hi guys, I'm running an oracle10g database EE on a UNIX SOLARIS 10 SPARC box, and trying to recreate a database from a DBCA template. When I do all steps, the process claims for an ora-28010 error when it completes 74% and after that DBCA never ends.