Panorama in Elements 13

Like Many Many Others i am having a problem with Elements 13 trying to make a Panorama , I run Windows 8.1 64bit , so why does this not work , it may start but stops and is gone , i have tried all to attempt but still the same , Can someone please help with this issue , I have tried to contact Adobe but nothing This is another problem no back up if anything goes wrong , im sure others will agree , I anyone can help Please do so , so i can use the program to its Full extent.
Cheers John C

Johnzzzlcpl
If your program is Photoshop Elements 13, then you do want to be in the Adobe Photoshop Elements Forum instead of Adobe Premiere Elements Forum as was suggested by Peru Bob.
But, depending on the response that you get in the Adobe Photoshop Elements Forum, you might want to explore the following which was written to about 3 months ago.
Elements 13: Error creating panorama
Wherever you seek Photoshop Elements 13/13.1 panorama support, be sure to give details of your panorama workflow.
By the way, have you updated your Photoshop Elements 13 to 13.1 yet using the program's Help Menu/Updates?
Best wishes
ATR

Similar Messages

Photomerge panorama in elements 7 problem, please help

Hello, I am having difficulty making a photomerge panorama with elements 7. Here is how I am going about it:
I have 3 files saved as jpegs I want to stitch. I open a file from its location in My Pictures, minimize it, then do the same for the next two pictures. I do this in order of left picture, center picture, right picture. Using the small pane at the bottom of the elements window, I hold down ctrl and click each of the three open pics to select them. Then I go to file and select new, photomerge panorama. A window pops up for making a new photomerge panorama, but nothing pops up staggered behind it--no new empty file screen or winows ocntaining my open files as I have seen in the tutorials). I leave it on auto and click add open files. All three titles show up in the window. Then I click OK. Nothing happens. There is no new file window for it to create a panorama in. I do not get an error messae. Just nothing as if I made no command. Can anyone tell me how to correct what I am doing to make it work?
Thank you

Juergen_d- thank you.
All I needed to do was stop minimizing the photos to the bin. When I left them all open on the elements desktop, it worked seemlessly. Amazing- thank you!

Interactive Panorama in elements 12

Is there a work around to allow this to be done?
I normally work nights so often find myself shooting night skys and star light, the milky way makes a beatiful back drop to some of the ruined buildings in the area. However to make full use of both the landscape and the stars panoramics makes alot of sense. Having just moved from a fairly old Nikon D50 to D7100 i was also forced to upgrade elements as the old elemnts 6 i was using did not support the new NEF files the D7100 produced.
I was shocked when i found there was no interective option for making my panoramas as the automatic system has in place seem unable to stitch with the tiny points of light that are the starts.
Elements 6 at least alloed me to get it close enough with the interactive layout
Any ideas will be greatly appreaciated.

In photoshop cs6 give this a try:
1. Go to File>Scripts>Load Files into Stack, browse and load the pictures for the pano with the Attempt to Align and Create Smart Object unchecked
2. Increase the canvas size of the document with the Crop Tool holding down the Alt key and dragging
    one of the crop corners out until you think the canvas is big enough to arrange your documents for the pano.
3. Align the layers manually in the document window with the Move Tool as good as you can.
   (you can lower the layer opacxity so you can see the alignment better, but don't forget to put all the layers back to 100% opacity)
4. Select all the layers in the layers panel
    (Select>All Layers)
5. Go to Edit>Auto-Blend Layers and use Blend Method>Panorama and Seamless Tones and Colors
6. After the blending it's possible you might see some whats looks like seams, so press Shift+Alt+Ctrl+E to make a merged copy on a new layer and hopefully that'll
    get rid of the seams.
I'll make another post with directions for putting the plugin into photoshop cs6, since you probably don't want to install pse 11 just to get a plugin when
photoshop cs6 is so much more capable than elements, for panoramas anyway.

Trying to do a panorama in Elements 12 with photos from LR5

I tagged a number of photos in LR5 and did an Edit In -> Merge to Panorama in Photoshop.., but the photos don't show up?

That’s for LR to CS6 or CC; not Elements. You are best to export jpegs from LR and then open them in PSE12 Expert Mode and from the menu use:
Enhance >> Photomerge >>Photomerge Panorama

Photomerge Panorama in elements 13

Does anyone else have problems with getting Photomerge Panorama to open in Elements 13?

Why is Adobe continuing to ignore the many forum threads inquiring about this same problem? IMO, this issue continuing year-after-year (and version after version) represents irresponsible decision-making on the part of their Change Control Board / maintenance management, for such a fundamental operation as photo-stitching.
In particular, when the same two images can be merged successfully using any of a number of separate photo-stitch apps from other vendors, yet crashes Adobe Photoshop, then ipso facto, where do YOU think the blame lies?
In my opinion as a software programmer, an attempt to perform such a basic operation as merging two images, regardless of their size, should NOT cause a frickin' crash. Programmatically, this speaks to (a) poor memory management, and (b) terrible error-detection/handling/reporting.
By several accounts in those forum threads, this problem continues with the latest OS updates, the latest driver updates, the latest Adobe Photoshop updates/versions, more-than-adequate RAM, more-than-adequate disk space, etc., etc., etc. ... Crashing Adobe Photoshop is an unacceptable outcome for such a fundamental operation, even if one is working with photos that are truly of larger-than-normal size. It's COMPLETELY inexcusable when the images in question are of standard sizes produced by current-day camera technology. The workaround of resizing the original photos is an unacceptable option for someone who is attempting to maximize a print size without resolution loss.

Panorama in Elements 7

I am trying to build a panorama of 30, 12mp images. Elements 7 says it can't align them, but if I use up to 5 images, it can. If I make 2, 5 image panoramas and try to align manually, I get a message that the image is too big. Autostich will do the alignment, but reduces the size of the images so I can't show the detail I want. I suspect a mamory proble, I am running windowa 7 on a Compaq computer with 3 meg of memory.
Is there some way I can use a scratch disk, or some other form of memory to allow me to do what I want.
Any and all suggestions are welcome.

May be it is limitation of PSE (marketing stragegy), so people have to buy a normal photoshop (high price!). I was not satisfy with PSE panorama anyway, you cannot manually correct the mis-align. May be try other panorama software. I just bit a Panorama maker 4 (V. 5 is the newest! But expensive.) by eBay in Germany for 13€ second-hand. Try your luck in eBay in USA. It is a good software I would recommend. I have nothing to do with this software company.
PSE cannot show my big Jpeg (over 10mb) and big panorama Jpeg too. This is frustrating that nowaday even compact camera can take great picture and PSE don´t go with the trend.

Photomerge Panorama on Elements 9 will not work

I have a copy of Elements9, which I purchased from Adobe, downloaded and installed but Photomerge Panorama will no work. It comes up with an error and shuts down the editor.

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

Photomerge Panorama in elements version 11

photomerge panorama opttion is grayed out. How can I enable it?

Use Expert Mode:
Enhance >> Photomerge

Where is panorama in elements 11

I click "file">"new" what happened to the panoram menu?

Enhance >> Photomerge

Photomerge Panorama crashes in PS Elements 10

I've finally found some time to try some panoramas using Elements 10 and it crashes every time I select Photomerge Panorama. I'm using Windows 8.1 on a fast laptop with updated drives and D drive as the selected scratch drive. A bit of an internet search has revealed this to be a common problem without a posted fix. I would have figured a patch or a bug fix would have been released by now. I've tried finding a contact number to discuss this matter with Adobe but keep getting routed to this forum for assistance. I'm frustrated that I've been sold a program that very clearly doesn't deliver what it claims to. Am I expected to now purchase a new edition of Elements in the hope that the Pano feature will work or does someone have a better solution?

I have the same problem; like you, even with completely updated drivers.
Adobe Photoshop 10
Windows 8.1
In my opinion as a software programmer, an attempt to perform such a basic operation as merging two images, regardless of their size, should NOT cause a frickin' crash. Programmatically, this speaks to (a) poor memory management, and (b) terrible error-detection/handling/reporting. In particular, when the same two images can be merged successfully using any of a number of separate photo-stitch apps from other vendors, yet crashes Adobe Photoshop, then ipso facto, where do YOU think the blame lies? It's unacceptable for such a basic operation, even if working with truly larger-than-normal photos. It's completely inexcusable when the images in question are of standard sizes produced by current-day camera technology.

Elements 12 photomerge-Panorama

When selecting Photomerge Panorama in Elements 12, program crashes with error message "editor 12 has stopped working".
Was working fine until last week then suddenly this started happening every time I attempt to run Panorama. Other Photomerge functions appear to be working okay, just a problem with Panorama.
Using Dell 8700 system running windows 8.1 in 64 bit mode. Have 24GB memory and lot of empty disc space.
Any assistance would be greatly appreciated.
Brian84790

Why is Adobe continuing to ignore the many forum threads inquiring about this same problem? IMO, this issue continuing year-after-year represents irresponsible decision-making on the part of their Change Control Board / maintenance management, for such a fundamental operation as photo-stitching.
In particular, when the same two images can be merged successfully using any of a number of separate photo-stitch apps from other vendors, yet crashes Adobe Photoshop, then ipso facto, where do YOU think the blame lies?
In my opinion as a software programmer, an attempt to perform such a basic operation as merging two images, regardless of their size, should NOT cause a frickin' crash. Programmatically, this speaks to (a) poor memory management, and (b) terrible error-detection/handling/reporting.
This problem continues with the latest OS updates, the latest driver updates, the latest Adobe Photoshop updates/versions ... Crashing Adobe Photoshop is an unacceptable outcome for such a fundamental operation, even if one is working with photos that are truly of larger-than-normal size. It's COMPLETELY inexcusable when the images in question are of standard sizes produced by current-day camera technology. The workaround of resizing the original photos is an unacceptable option for someone who is attempting to maximize a print size without resolution loss.

Elements 12 keeps crashing when i try to use panorama

now when i attempt to create a panorama in elements 12 the program completely crashes how can this be fixed ?

Since this all happening when using an app, you can try doing a reset.
Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

Elements 10 stops working when starting Photomerge - Panorama

I have selected two photos and then went to File, New, Photomerge-Panorama. The program starts then I get a message that the program has stopped working and I should close it. I have tried to start the Panorama from the Organizer and from the Editor with the same results. I can use the Editor for other editing and it works normally.
The two photos were obtained from my scanner. I scanned a large document and saved the scans as JPEG files. I have done this previously and have made panoramas of other photo series and it has worked.
I have Windows 8.1. I don't think I have tried to make panoramas since I went to Windows 8.1

I had the same problem with Photomerge panorama (PS Elements 9) on my new Windows 8.1 HP laptop.
I found a post over on a thread about CS5 talking about dual video graphics drivers. My laptop has both Intel and Nvidia chips and drivers, and after I disabled the Nvidia driver in Windows Device Manager, so that I use only the native Intel graphics, Photomerge Panorama comes up fine. My external big monitor looks crisper with the Nvidia graphics enabled, but I can re-enable that easily after I am done with Photomerge.

Elements 7 and camera RAW

I have Elements 7 and a Nikon D90. I have downloaded photos taken in RAW onto my Mac using iphoto. My Mac doesn't have Elements on it; that's on our other Windows laptop. I now want to create a panorama using Elements on the laptop, so I've put the NEF images onto a memory stick. I went to the Editor in Elements, used 'open' and browsed to the memory stick, selected the images and opened them. The editor told me that it was "the wrong type of file". I checked in help. I've downloaded the current camera RAW update and restarted the laptop. Same thing has happened. Also link on the Adobe website for this problem is broken. Any suggestions please?

The 5.6 camera raw plugin is the newest camera raw plugin that works with pse 7
and should open D90 files.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4626
MTSTUNER

I cant do a panorama

I used to do panoramas in elements 9 and now, with elements 12, I get " error 48, file or folder does not exist" etc. What am I doing wrong?
Photoshop Elements

Try here:
iOS: Troubleshooting backup issues in iTunes
Also reboot the computer and reset the iPod nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Also try as necessary another cable and USB port

Panorama in Elements 13

Similar Messages

Maybe you are looking for