Panorama settings are not retained after restart.

In 4.0, the Panorama settings are not retained after restart. The tabs that make up the Panorama settings are retained after restarting Firefox. Any suggestions?

App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore
Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed.

Similar Messages

How to fix "OS X Lion user's custom preferences are not retained after reboots"?

How to quickly fix "many of user's custom preferences from within OS X Lion 10.7.x and/or MtLion 10.8.x are not retained after Mac reboots and/or log-offs"?

If many of the user’s custom preferences from within OS X Lion 10.7.x and/or Mountain Lion 10.8.x are not retained on Mac after reboots and/or log-offs, then implement this following QUICK FIX procedure:
Login to user’s OS X login profile… access & select the Finder pull-down menu Go… next select Library (just user’s Library only available when holding-down the Option key here within OS X Lion + MtLion)… find-select-and move the Preferences folder out from the overall user’s Library to the user’s Desktop area for temporary safe keeping. Then log-off user and/or reboot Mac… log-in as user, and reset all user’s custom preferences (System Preferences, Dock icons, etc. [OS X system now recreating all user’s login profile preferences]) according to their previous Desktop setup. Finally reboot after making all new user preferences setting changes… log-in again as user, and check to ensure that all user custom preferences now stays retained. If all OK, then you may move the corrupted Preferences folder from the user’s Desktop area to the Trash for final deletion.
*NOTE: Is this above-written QUICK FIX completely acceptable to Apple's OS X Lion + MtLion troubleshooting standards? So far this solution appears to have fixed a recent iMac user's issues with custom preferences.

Some system settings not retained after restart

In Snow Leopard, after a restart, the sound volume setting defaults to 50% and some Finder window views settings change (icon view becomes list view) or a cleaned up window reverts to jammed up icons. Additionally, iTunes always asks to allow incoming connections even after using the Security setting to allow them. Reset the PRAM but the problem persists. Is anyone else having these problems and is there a solution?

I updated from Snow Leopard to Mountain Lion and blow me down, full control of the startup sound has returned !
Maybe the Apple Store put something into the PRAM which was ML specific. I don't know. It's just working now.
Sorry I can't help explain what to do.
Garry

Cookie exceptions are not retained after closing firefox 4

I normally keep the "accept cookies from sites" option un checked and use the "exceptions" option to allow cookies from selected sites. Since upgrading to firefox4 this no longer works. The exception list does not carry over when firefox is restarted. I'm not sure if this is a problem with firefox4 or a changed registry setting. Grateful for any help you can offer.

App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore
Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed.

Various settings will not save after restart or reboot.

Macbook Pro 15 Early 2011 here. I keep modifying my dock and some of my trackpad settings, but everytime I restart my computer it goes back to the default state. Safari also opens with the same webpages everytime, as if it's stuck in the past or something. Is this a permissions issue? If not, what should I do to fix it?
Thanks in advance,
Ryan

What your describing with the Dock and trackpad sounds like either wrong permissions or corrupted preference files (.plist).
Download the free OnyX here and run all the first checks, then do ALL the cleaning and maintainence tasks and make SURE to reboot when your done!
http://www.macupdate.com/app/mac/11582/onyx
Note: for Snow Leopard or earlier operating systems, scroll down you need to MATCH the OS X version your using.
After you do that run OnyX again and under the Verify is a preference file checker, check the box that says "show only corrupt .plist" files and run that.
Note all the corrupt .plist files, we will have to find them and delete them using the free Easy Find
http://www.devon-technologies.com/files/EasyFind.app.zip
Once you do those two things, reboot the machine and try to set your preferences again in the Dock and trackpad.
Another way is to open the Users/Library/Preferences folder and look for
com.apple.systempreferences.plist
com.apple.dock.plist
and deleting those files that way.
Far as Safari, that could be a feature to open all previous web pages, OnyX will clean that out for you when you ran it, but likely it will do it again when you use Safari as it's trying to be helpful or something should be able to disable it somewhere.
Tell us what your OS X version is and your MacBook Pro model, it's something like MacBook Pro 3,1 or 8,2 under your Apple menu > About this Mac > More information.

Flash CC crashes after publishing iOS app + publish settings are not being saved to file

I have two issues:
1. Flash CC crashes every time I publish an iOS app
2. My Publish Settings are not being saved
1. Flash CC crashes every time I publish an iOS app
Since yesterday Flash CC keeps crashing right after I publish an iOS app. The app is published correctly though. I tried everything from restarting my MAC, reinstalling Flash, removing the folder "Flash CC 2014" inside Application Support/Adobe. But all this did not work.
2. My Publish Settings are not being saved
Since the first day I installed Flash CC, it did not save my publish settings along with the .fla-file. I never had this issue with Flash CS 5.5. This was not a very big issue, but now every time I publish an app and Flash CC crashes I have to fill in all the publish settings manually. Now I'm getting frustrated. Even saving my settings as a preset, storing it inside a folder and importing it again, won't help. Then I will get the message: "Import failed: invalid profile file."
Can please anyone help me with these issues? It is quite time consuming to continuously enter the settings manually after every crash.
Thanks!

reset your preferences -
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

Settings not retained after a few days of non-use

If I don't use the iPod for a few days, when I turn it on I see the menu for selecting my language. Then I also have to reset my contrast and main menu options, etc. Essentially, my settings are not being retained.
I can understand the appearance of the Apple logo as the iPod restarts, but I shouldn't have to keep recreating my settings. It didn't used to do this.

Hi Michael
Have you had any answers to this as i'm expierencing the same problem.
If my g3 ipod has not been used for a few days,when i switch it on the contrast as at factory setting & the language option screen is displayed.
Again like yourself i did not used to have this problem
i'll keep checking this site for updates however if you have managed to resolve this i would be greatful if you could advise
Regards
Ed

After updating to Yosemite, my screen saver settings are not maintained. The screen saver reverts to some Apple default. There is no way to get my setting to be maintained.

After updating to Yosemite, my screen saver settings are not maintained. The screen saver reverts to some Apple default. There is no way to get my setting to be maintained.

Hi ..
Might be corrupted preferences.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.screensaver.plist
Click Go then move the com.apple.screensaver.plist file to the Trash.
Restart your Mac then reset your screen saver.

Early 08 MBPro-TCP/IP settings are not saved

On my home wireless network I have MAC address filtering enabled and broadcast SSID disabled. All MAC addresses are entered in the router's filter. An early 08 MBPro does not retain network settings for Verizon router on the network. When I look at the TCP/IP settings in network prefs I see they are nothing like other computers on my home network. If I click "assist me" then "diagnostics" in Airport setup I get walked through a process which allows me to choose the network I want to join. There is a list of available networks which does not include mine (since SSID is disabled) and a button which allows me to choose closed network, which I take. After entering my network's ID and WEP password I finally get connected and get a message that my connection is OK. Problem is, when I put the computer to sleep or restart I can't reconnect and the old settings which don't work reappear. It appears that the TCP/IP settings are not being saved. Could this be some corrupted preference of does it sound like a hardware problem? Thanks for any insights.
Message was edited by: Thomas Camilleri

Odd. You may be able to repair this with the 10.5.7 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
Oh, and please be sure to re-boot your modem and router.
-mj
Message was edited by: macjack

Mail settings are not saved any more

Hi,
after my mailbox structure has crashed, I tried to reset Mail as explained in this answer: https://discussions.apple.com/message/22302114#22302114
After restarting Mail all settings were deleted (as expected) and I set up my accounts and settings again. Then I recognized that the settings are not saved any more. I tried some times but Mail didn't save the settings.
I hope there is a chance to fix this problem.
Thanks for help.

Thanks for linked document but I find it funny and someone rude that the article assumes that EVERYONE knows the lingo used - i.e. Profile Folder is in "%APPDATA%\Mozilla\" . Where the hell is that???? Jesus, it's much easier to switch to Chrome.

Screen values are not retained in Tcode BP, onclick of SAVE button

Hi,
In Tcode BP, I am selecting a Role with the Business Partner number. COMPANY CODE Push button on the Top is Enabled and Click on that.
Enter the Company Code and provide the Account management tab by providing Reconciliation Acct 120113, Sort key as 035, Planning Group as E1. Go to Payment Transaction Tab, Enter the Payment terms as Z003, check Record payment history. Now, Click on SAVE Button on the TOP.
The issue is that, The screen values are not retained in the Payment terms tab and Customer is not Created after saving of a BP Number which is related to a Customer.
Regards,
Deepthi.

OSS Note 1254214 is applied and it is solved.

Settings are not saving

Hi Guys
I am fairly new to my iMac (since Christmas). Everything was working perfect and now I am noticing that my settings are not saving. Some examples are:
1. I set it so my pictures can be shared with other users. The other users of this mac still cannot pull up the pictures in their iPhoto.
2. I have the settings for software update set to check monthly. Every time I wake up my computer it checks for updates automatically.
3. The log in settings are set to log in without a password every time I wake up the mac and it still requires a password.
What is going on??? It is so frustrating, please please help???

So even after opening iPhoto, there is no file "com.apple.iPhoto.plist" in your ~/Library/Preferences folder (that is in your HOME folder, NOT the Library folder at the top level of your hard drive)?
If so, there is an issue with permissions to write to your ~/Library/Preferences folder. Go up one level to your ~/Library folder (again, the one in your HOME folder), click once on Preferences folder, then chose menu File>Get Info. At the bottom of the Get Info window, next to your user name, the Privilege column should say Read & Write.
If it doesn't say "Read & Write" next your name, you have to change it so that it does. Click on the lock icon in the lower right of the "Get Info" window, enter admin user name and password. Change the Privilege column next to your user name to "Read & Write." Then click on the little gear icon at the very bottom of the Get Info and select "Apply to enclosed items."
You might want to go through that procedure even if it does say "Read & Write" just to make sure, because it really sounds like you have a problem with permissions in the Preferences folder.

Settings are not being saved when i reboot

i am having a problem when i restart my computer my settings such as dock settings background settings are not being saved how do i resolve this problem?

Welcome to the Apple Discussions!
Is this just for new settings that won't stick? Or have all your original settings reverted to the defaults? Have you started up from your Mac OS X install disk and used the Disk Utility to "repair disk"? Do you have a backup of your important files?
-Doug

Clock and date settings are not saved

clock and date settings are not saved in lion

I'd give AppleCare a call.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
You may want to look under date & time and set the clock from the internet. At least you will have the correct time after a while.
RObert

Form settings are not saved on one client

Hello,
What are possible reasons that form settings like size and position are not saved.
I have one client with SBO 8.8 PL15 installed. On this client this settings are not saved.
So the user has to resize the forms everytime he opens it.
I tried it myself with his SBO user directly on the server and a terminal-server. No problems there, all settings
are saved even if i switch between the systems.
If i am correct these settings are saved in the UserPrefs field in the OUSR table.
Any ideas?
Thank you for all your help.

Hi,
Have you searched the forum?
You may check this to start:
User Settings lost after session is released
This setting is related to client.
Thanks,
Gordon

Panorama settings are not retained after restart.

Similar Messages

Maybe you are looking for