Pantech Hotshot and USB Dumping issue?

So, recently, I got the Pantech Hotshot. I loved the phone. After about a month of use, I decided to get a microSD card to expand them memory a bit. The thing is, when I put the SD card in and turned the phone on, A screen came up with an illustration of a computer and a cell phone with the word Downloading under the phone illustration. Under that, in bright green letters, there is something that says " *USB Dump..."  This screen has been up for about 24 hours now. I have tried to take the battery out and restart the phone, but the screen came up again. Any help would be GREATLY appreciated!

Try removing the SD card and reboot - does the phone come back to normal?  If it does, then reinsert the card and try again.  If you get the same error, try putting the card in your computer (using an adapter and/or card reader) to see what is on the card.
Normally, the card needs to be formatted prior to adding files to it from your phone, but it happens automatically when the phone detects the card.  For some reason, the phone is not detecting the card properly.  What size (memory capacity) is the card?  Brand? 

Similar Messages

  • Bluetooth And USB Connectivity Issues

    I am having issues with both my bluetooth mouse and keyboard staying connected and or dicovered. Also, peripherals connected via usb are also dropping offline randomly. Any thoughts?
    Thanks
    Joe

    When you next have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • ITunes 7 and USB Harddrive issue

    Everytime I install the new version of iTunes, it drops my USB Harddrive from the computer. The system thinks the drive is empty, yet all my folders are there, just no files. I do a system restore and no iTunes, but I can then see everything on the harddrive. What is causing this? I get an error that says failed to write to drive G: after the install which G: is the USB harddrive. Never had this issue before the update, and can't get back to version 6 now. So of course I can't update my ipod now.

    Similar problem - when I upgraded to iTunes 7.0.2.16, my USB connected camera, my pen drives, and my iPod nano all stopped working.
    I don't want to re-install my OS there has to be a reason

  • Yosemite 10.10.2 and USB hub issue

    Hi there,
    I got a MacBook Pro (Retina, 15-inch, Mid 2014), OS X Yosemite last December and bought a USB hub (four-port) on Jan 3rd. I was using it for one month with
    OS X Yosemite 10.10.1 without any problems.
    On Feb 4th I switch to OS X Yosemite 10.10.2 and I started to have 2-4 times the following issue per day:
    - mac frozen (I cannot use the keyboard or the mouse) but I see that the clock is working. No other way that a hard reset.
      I did check memory and hard drive and everything is ok
    - for one week I did use the USB hub and didn't have any issue
    - I started again and less than 24h hour later I got a similar issue !
    I am not 100% sure this related to 10.10.2 but before with 10.10.1  I had no issue ! I am not sure to understand how a USB hub can crash a Mac.
    I try to look a the Consol application but couldn't really identify a common issue a the time of the issue but maybe some messages like that :
    Any idea or suggestion ?
    Thanks
    Cheers
    Fabien

    Hi there,
    I got a MacBook Pro (Retina, 15-inch, Mid 2014), OS X Yosemite last December and bought a USB hub (four-port) on Jan 3rd. I was using it for one month with
    OS X Yosemite 10.10.1 without any problems.
    On Feb 4th I switch to OS X Yosemite 10.10.2 and I started to have 2-4 times the following issue per day:
    - mac frozen (I cannot use the keyboard or the mouse) but I see that the clock is working. No other way that a hard reset.
      I did check memory and hard drive and everything is ok
    - for one week I did use the USB hub and didn't have any issue
    - I started again and less than 24h hour later I got a similar issue !
    I am not 100% sure this related to 10.10.2 but before with 10.10.1  I had no issue ! I am not sure to understand how a USB hub can crash a Mac.
    I try to look a the Consol application but couldn't really identify a common issue a the time of the issue but maybe some messages like that :
    Any idea or suggestion ?
    Thanks
    Cheers
    Fabien

  • Ventrillo and USB headset issue

    I recently purchased a USB headset to use with ventrillo (voice-chat software). While it is a definite upgrade over the built in mic, my friends are telling me that it is also producing a noticeable buzzing sound when I speak, which seems to increase and decrease randomly. I'm told sometimes its not too bad, and sometimes they can't hear me at all over the buzzing, which happens with no changes to the mic output. I think this buzzing problem may be caused by the external keyboard that I use, but am not sure.

    You can very easily test your theory by disconnecting the external keyboard and using the built-in keyboard instead, and seeing whether the buzz goes away.

  • Pantech Hotshot  has horrible signal strength

    I have a Pantech hotshot and tend to have 1/2 of a bar with 3G/1X while in my home.  Other family members on our same plan have much stronger signals within the house.  We also have a verizon wireless home phone line that seems to have fine reception.  Is this inherent in the device or can I do something to improve this?  I've done #228 recently.

    The issue is verizon dumped the modern EVDO REV A network capabilities and went back in time to the EVDO rev 0 (the rev 0 had slower data speeds and less strength) My guess is that if you look at the specs on the other phones, they are EVDO rev A which im my experience had better signal quality. I had the lg versa (rev a Compatible) before my hotshot and the versa always had 3-4of 4 bars for both 3g (EVDO) and 1X whereas my hotshot gets 3 bars of 1x and if im lucky 2 bars of 3g. Verizon implemented these phones to literally be a basic phone and if you want the better signals, more advanced features and 4g capability, then they force you to the smartphone plans. NONE of the feature phones are 4g compatible and they wont be until verizon does away with 3g

  • Pantech Hotshot Alerts Not Working

    I recently started using our son's Pantech Hotshot and cannot get the alarms and calender alerts to work.  The volume is at max and there is a specific tone selected for each.  I have taken out the battery and took off the vibration for the alerts.  It still is not working.  Does anyone have any suggestions?  Thanks.

    Hello WhiteDrone,
    Are you still experiencing this?  If you are please PM me your name, mobile number and best contact number so I can further assist you.  Thank you.   

  • Pantech Hotshot Destroyed

    My Pantech Hotshot is destroyed.  My wife transferred her Pantech Hotshot back to her old LG phone.  Her phone works fine and no loss of data.  Me - Lost everything.  I transferred my number to my wifes Pantech Hotshot and it works - I get calls and texts but my address book cannot be transferred from Backup Assistant to my phone.  I have talked to a Verison Level 1 million tech support and they can't get Backup Assistant to recognize my phone change.  This boggles my mind.  what is Backup Assistant for then?  Does anyone have any suggests for Verison's techie's.

        Hi Tom145,  I am so sorry to hear about your device!  You certainly have a wonderful wife as she was willing to swap phones with you!  Are you getting a specific error when trying to restore the contacts?  Are your contacts still showing online on My Verizon?  Have you tried removing the Backup Assistant app from the phone and re-downloading it?  I look forward to your reply so we can get to the bottom of this!
    Thank You,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • Pantech Hotshot.. Issues.

    My Pantech Hotshot randomly reboots all the time. I bought it new from the store, I've had it for just over a month, never dropped it, it has no water damage. I don't understand why it's having this problem, but it shuts off then turns itself back on multiple times a day. It happens randomly, I could be in the middle of a call, or it could just be lying on the table and I happen to notice it restarting itself. It also doesn't always play my ringtone when I receive a call. I've tried multiple different tones, but it does the same thing with all of them- sometimes it'll play the ringtone when someone calls, other times it's silent and then plays the missed call tone at the appropriate time... Over all, I like the phone, but these issues are starting to get very annoying. Especially it restarting itself when I'm in the middle of a call. Anyone else having problems like this with their Hotshot?

    My version is D8992VWBC44F.236
    Thanks so much for looking into it.  As I said I REALLY like the phone when it works and don't want to turn it in for something else so hopefully you can get it resolved.
    So just to be clear my phone randomly doesn't sound the ringtone but instead it sounds the missed call chime.  But other times it does sound the ringtone like it should.  When it only does the missed call chime I then see the call and phone the person back.  It has happened with my friends and family on Verizon and those who aren't with Verizon.  Not good though if it is a Dr's office which has happened to me twice.  They are so hard to get ahold of so when you get that call you want to be able to answer it.
    The other issue which doesn't happen as much to me is that I will be using the phone on a call and then hang up and all the pics that I have saved to pic id for contact numbers are gone.  Same for pics in the pics area.  But if I take the battery out and put it back in they are there.

  • Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

    Gurus,
    I am facing an issue regarding SAP TPM IP ( HANA)
    I have 3 Infoproviders
    Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
    Issue is  Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
    I tried debugging it and found it is trying to read   i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
    The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated.  So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
    Can any one help,it would be really help.
    Thanks
    Ashok

    Hello Gregor,
    On the launch of planning layout it throws an error message:
    Planning is not possible RSCRM_IMP_CORE008.
    When I debugged, i got to a point wherein
    particular Real Time Planning DSO is
    not getting retrieved under the MultiProivder in below class.
    Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
    returning the real time Info-Provider Name(i.e. Planning DSO)
    underlyingthe Multiprovider.
    I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
    Let me know, if you have any pointers on this topic.
    Thanks,
    Jomy

  • X6 bluetooth and USB issue

    My old 5310 had no problems connecting through bluetooth or cable to my pc. Now I updated to a X6 and nothing but issues connecting.
    The bluetooth works sometimes, when it feels like it, when it doesn't work and I disable bluetooth on the phone, I can't enable it again, it just says something along the lines it can't execute bluetooth operation. First time I experienced it, I gave up and a little later I tried again, bluetooth enabled as normal and immediately connected and worked as normal.
    Then I try to connect through USB cable, on which it only tries to find drivers (which it used to have when I first got the phone) and eventually I get a message the phone is still transferring files (which it isn't) and I need to enable PC Suite mode while that's what it's on.
    I think there's something very wrong with the software..

    Hope your issue is solved.
    My issue is this:
    MY HARDWARE / SOFTWARE:
    - Nokia 6350 phone
    - IOGEAR GBU321 usb bluetooth
    - Windows XP on Dell Latitude D610
    - PC Suite 7.1.51.0
    PROBLEM:
    PC Suite works fine with my phone if I'm in range. If I walk far away and bluetooth connection is lost, when I return to range, the synch btwn PC and Phone MAY or MAY NOT resume. Most of the time it does, but sometimes it does not.  I've tried to close/re-start PC-Suite to no avail. I've tried to re-detect my phone via PC Suite...nothing.
    The workaround fix I've found  to resume the PC--Phone connection is this:
    - On the bottom left of task bar, right click on the bluetooth icon and "Explore My Bluetooth Places"
    - Delete "Nokia 6350 OBEX File Transfer"
    - right click on the bluetooth icon and select "Quick Connect"-->"File Transfer"-->"Find Devices"-->"Show All Devices"-->select the Noka 6350 (for some reason it's visible here)-->and click "Finish". 
    Then suddenly, my PC-Suite Icon show connected again and I'm back in business.
    WHAT is causing this and HOW to fix this permanently ? Something is timing out in PC-Suite.
    Thanks,
    Neel

  • Import issue - split and compressed dump

    Hi,
    I received 15GB export dump file from site as below, they are splited and compressed
    1. xaa 4gb
    2. xab 4gb
    3. xac 4gb
    4. xad 3gb
    i have import these dump file here in Unix server. i found some document to import the split and compressed dump
    i follow the below steps
    1. copy all 4 files into a directory
    2. then i used commands
    rm -f import_pipe
    mknod import_pipe p
    chmod 666 import_pipe
    (import_pipe file created in the current diriecty)
    nohup cat xaa xab xac xad | uncompress - > import_pipe & ( Process number created like 23901. we need to wait till complete the backgroud process before giving IMPORT command?)
    then i give
    imp userid=<connection string> file=import_pipe full=yes ignore=yes log=dumplog.txt
    then it shows the imp-0009 error...
    pls help me resolve this issue.
    Thanks in advacne

    Pl post details of OS and database versions of the source and target. You will have to contact the source to determine how these files were created. It is quite possible that they were created using the FILESIZE parameter (http://docs.oracle.com/cd/E11882_01/server.112/e22490/original_export.htm#autoId25), in which case the import process can read from these multiple files without you having to further manipulate them.
    HTH
    Srini

  • Not recognising USB card reader and also PhotoBooth issue

    Hi,
    I'm a new member and a bit of a numpty when it comes to Mac (new owner).
    My Macbook Pro is giving me some grief tonight and I have 2 separate (i think) issues.
    It will not recognise my USB card reader. It worked fine last week and I did eject it properly before removing it. I've tried the card reader on a PC and it is working fine....
    Also when I go to open Photo Booth it tells me that my camera is not connected or in use by another program. But as you know the camera is built in!?!?!
    I'd be very grateful for any thoughts on how I might fix the problems. The nearest Mac store is 2 hours away....
    Many thanks in advance

    bigredpaws, welcome to Apple Discussions.
    Look at
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151?viewlocale=en_US
    Common fixes for USB device issues (unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20070824012114701
     Cheers, Tom

  • Is there a way to truly "unlock" my Pantech Hotshot so I can answer it while driving without causing a wreck?

    Okay, maybe I'm just not understanding something, but here goes.  I recently "upgraded" from my 1990's era flip phone to something more "modern", and so far I'm thinking it's one of the biggest mistakes I've ever made.  In my ongoing quest to just be able to actually use my Pantech Hotshot, the most recent situation I'm facing is figuring out an easy way to answer the thing without have to slide up the locking bar and then press another icon.  My wife called me yesterday while I was on the way home, and in trying to fiddle with the blasted thing I missed the call and it went to voicemail.  I then pulled over into an office parking lot to call her back, lest I kill myself and someone else on the road.  Here is the closest thing I find about this issue in the user manual:
    CALL SETTINGS
    Allows you to customize the call settings of your phone. HOME KEY TO ANSWER Allows you to answer incoming calls when you press the Home key. 1. Unlock the screen, tap Settings and then tap Call Settings. 2. Tap ON or OFF next to Home Key To Answer
    In actual usage, all this seems to mean is that I can hit the Home Key to answer the phone, after I have slid up the locking bar.  What I think I'm looking for is a way to totally disable the locking bar so I can just answer phone with going through multiple gyrations while driving.  Any insights on this out there would be most appreciated.
    I do so miss my flip phone.  All I had to when receiving a call was flip it open and say hello.  And pulling up my contact list to make a call was an easy, one-handed operation.  I don't see how fiddling with a touch screen is progress, but maybe I just don't get the big picture.
    Thanks all.

    http://macmost.com/ipad-video-screen-capture.html
    http://www.tuaw.com/2011/04/26/how-to-capturing-ipad-video-with-audio-narration/
    http://www.youtube.com/watch?v=8nb6-ixKiOY

  • Download music to Pantech Hotshot

    How do I download music from my computer to my Pantech Hotshot?  Can I download from iTunes?

    be patient. when you connect, after a while an option should come up on the phone where your choose modem mode or mass storage. (if the option doesnt appear and you waited a long time, make sure the battery indicator thing in the top right is showing movement )(looking like its charging) or saying its charged. then go to tools and scroll down to usb mass storage and hit that and it should connect. if not then download the backup assistant plus desktop client from the verizon site. that will install the drivers needed if the mass storage doesnt work) to get the drives to add files, it needs to be in mass storage. if you dont have an sd card installed, then you are limited to a drive of only 10mb. if you do have an sd card, when it switches to mass storage, 2 drives will come up. choose the one that has the folders in it (if the sd card was formatted by the phone). then you see the pictures folder and what no t and you can copy the stuff to and from the card on the computetr.

Maybe you are looking for