Panther software installation DVD 1 of 2 missing

Hi, i have lost the software install and restore disc, the 1 of 2, an i new to do a clean install of it? what can i do? can someone help me!?
would really apreciate, thanks

Hi, Alejandra. You'll have to buy another installer disc set — there's no way you can reinstall without the necessary discs. Upgrading to Leopard as Simon suggests is certainly one option, but if you aren't sure all your other software is Leopard-compatible, it may not be the best option for your present circumstances. Whichever OS version you choose to buy — and unfortunately I'm completely unfamiliar with sources in Mexico — be sure to buy only a retail installer set. The discs that are shipped with Macs are specific to the model they were shipped with, and won't work on other models. They are grey; retail disks are black.
In the USA, Apple stocks and sells replacements for the original model-specific discs that were shipped with many recent Mac models, possibly including your Powerbook. But I don't think Apple USA can or will send them to Mexico, and I don't know whether the same replacement service is available there. You might be able to find out by calling the phone number for support in Mexico on this page:
http://www.apple.com/support/contact/phone_contacts.html
Good luck.

Similar Messages

Help! i have lost the panther software installation DVD 1 of 2!

Hi, i have lost the software install and restore disc, the 1 of 2, an i new to do a clean install of it? what can i do? can someone help me!?
would really apreciate, thanks

Welcome to the Apple discussions.
If you contact Apple support, they will sell you a new set. The number in Mexico is 001-866-676-5682

Software installation DVD for 5691

Hi,
We recently got a NI PXI 5691 for our project but the tool kit did not have a DVD for the software installation part.
Can I get the DVD online ?
Thanks,
Sharmi

Hi Sharmi,
You can download the driver for the 5691 from our website. The link is below.
NI-5690 1.1 - Windows 7 32-bit/XP 32-bit/Vista/2000
Regards,
Travis Ann Nylin
Customer Education Product Marketing Manager
National Instruments

Lost Installation DVD 1 - Replacement Options

Please tell me how I can replace my Macbook Software Installation DVD #1 since I have lost it. I have DVD #2, but can not find #1. What is the cost to get another one. Can I do it online since I am disabled? It's much easier that way.
Thanks,
Robert

Welcome to the Apple Discussions!
You'll need to call AppleCare Support. They can provide you with a new set of disks. In the past, they've charged about $60 for a new set. You may also be able to go into an Apple retail store and order a set, but Apple does not provide support online or via e-mail. Apple uses a outside relay services for inbound and outbound TDD calls. Anyone calling Apple via a relay service should ask the relay operator to press zero to reach an operator.
As Alex mentioned, you won't be able to buy a retail copy of Mac OS X for Intel at any price (unless you want to buy the "universal" version of 10 client Mac OS X 10.4 Server for $499).
-Doug

I have windows 7 and when i start up i tunes i get a message..."The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i

when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chris

Refer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

Problem reading Captivate 6 installation DVD on Vista

I just received my copy of Captivate 6 on a DVD for Windows. I would like to install Captivate 6 on a PC running Windows Vista 64 bit service pack 2.
My DVD drive cannot open the installation DVD to even start the installation. Is there a way I can install Captivate 6 on my system?
PS-I already paid for this copy of Captivate 6.

Well, this is a mystery. After asking the question, I downloaded and installed the trial version and then used the product code from the purchased version to obtain a serial number. This worked.
I also tried out the install DVD on another computer with Windows 7, and it started to autorun as expected.
I then came back to my Vista PC, inserted an old Acrobat installation DVD, which started to autorun as expected. I removed the Acrobat installation DVD and inserted the new Captivate 6 installation DVD, and magically it started to autorun this time.
It must have been my optical drive, but I don't know why it read the DVD this time and not the others. (Never got any error messages. The computer just didn't read any data on the drive and was still looking for media to be inserted. Maybe something is a little misaligned??)
At any rate, problem solved and the software is installed and registered. Thanks for your response.

At a complete loss. Worried data is gone for good. Trying to fix disk by booting Disk Utility from installation DVD but disk ejects. Help!

Hello Comunity,
I'm at a complete loss and I hope you could help me.
The machine I have is I believe an early 2006 iMac model. (Model identifier 4,1 if I recall correctly).
Awhile ago I installed Snow Leopard on the machine but have since begun encountering serious problems (but I think it's due to the hardware and it's age rather than the software, Snow Leo was running smoothly) and now the computer won't start - I'm faced with a grey screen and a flashing folder with a question mark on it. I tried booting using the various key combinations and as I understood it, my last resort at fixing it myself would be using Disk Utility on the installation DVD.
This is what happens:
I boot the computer, insert the disk, press down and hold C (also tried Option). I hear the computer trying to read the disk, but after a considerable aount of time holding down the key and a grey screen, the disk ejects and the flashing folder returns.
Could anyone offer an insight or advice?
At this point I'm not even that interested in fixing the machine, but there are some extremely valuable files that I need to recover (the machine gave out just days before I got my extrenal HDD to back them up).
I'm worried about taking the machine down to the Genius Bar - I'm a completely self-supporting student and I imagine the recovery cost would be huge (if anyone could provide any information on the potential cost of the repair and/or recovery that would help).

One thing to try without needing the install disk: reboot holding down cmd-S. It should reboot to a black screen and text prompt. Type the following, with spacing exactly as shown, hit the return key after each line:
mount -uw /
fsck -fy
Then type
reboot
and see if that helps.
Do you have any other Macs in the household (or cna use a friend's) that you can try connecting to it with a Firewire cable? If so, reboot the iMac holding down T, you should see a large Firewire symbol moving across the screen. Connecting to another Mac with a FW cable will show you the iMac's hard drive mounted to the other Mac's desktop.
You can also try Diskwarrior, which fixes drive filestructure problems. It's around $100.
Professional data recovery cost would depend on a) whether the hard drive is actually at fault, b) if it's physically damaged or just has a filestructure problem. A physically damaged drive can go into the thousands of dollars for data recovery; a drive with filestructure issues usually costs a lot less to recover files.
Matt

Is it possible to update a 10.6.3 installation DVD to 10.6.8?

Hello Everyone,
I work with a variety of clients and businesses that have need to reinstall their OS on a semi-regular basis. While I can use the original installation DVD, it's (much) faster to reinstall via a hard drive-based disc image of the appropriate version for their system (usually 10.6 or 10.5 these days, of course).
While I have used System Image Utility in the past to make custom images that install the base system, then install the appropriate Combo Update, this does not always work with newer systems as they often ship with a newer build of the OS than was bundled on the retail DVD I used to make my bootable hard drive. For example, the latest 10.6.3 Snow Leopard retail disc wouldn't boot recent MacBook Pros that shipped with 10.6.5 pre-installed on the hard drive.
So, what I'd like to do is to be able to upgrade the installation images itself to 10.5.8 and 10.6.8, respectively. Once I've done this, I would then be able to build custom images that would install the default build included on the CD, and then update with the Combo Updater, prior to that first reboot.
Even nicer would be if I were able to update the installation files themselves (such as Essentials.mpkg), so that I could forego having to apply the Combo Update each time—it would simply install the latest version from the get-go. Of course, that may require more work than would seem worth it.
In effect, I'm hoping to find a "slipstream" process for the Mac, similar to what PC users have enjoyed for many years now. Given the Mac's much-better imaging system, I should certainly think it possible. Any ideas out there? :-)
Thanks much,
MBJ

Ok, Perfect, yesterday night I did a maintenance for a 2007 mac book pro with much less core 2 duo processor than yours, 2gbs of ram, and the Mac went pretty well after installing the 10.7 from 10.6.8, so, Since you just told me the specs of your computer, I believe you are MORE THAN GOOD to install the LION 10.7 software. Just make sure if you download the dmg file from a torrent, probably what you will find is a 10.7 file.
After you install it, then run the Software Update Tab under the Top Left Corner in your computer and install the OS X 10.7.5 Update.
Just remember, dont even try to install the Mac OS X 10.8 Mounta Lion, as it uses a 64 bit kernel and your computer uses a 32, which will be very likely to experience a lot of system crashes due to your small amount of RAM memory.
I recommend you if you in the future would like to go for ML 10.8 OS X, you should change your RAM Memory first.
Hope this info was helpful.

Clean install from a Lenovo installa. dvd: UEFI vs Legacy + Thinkpad setup acc. to Lenovo user Guide

Machine: T520 bought Feb. 2012
O.S. W~7 Pro 64-bit
I want to wipe the harddrive, buy a Lenovo W~7 PRO installation DVD, and do a completely clean installation.
Lenovo User Guide (.pdf) Ch. 8, Adv'd Config, Installing Windows 7, p. 295 (212 of 298) says:
Start Thinkpad setup, then choose UEFI versus Legacy, then insert the installation DVD.
This obviously does not apply when the harddrive has already been wiped (necessary to 100% eliminate all traces of irreversible damage caused by a virus, including the re-installation partition (Q-drive).
When an intallation DVD is purchased from Lenovo, is not the first step to insert the DVD ?!! Then presumably there is an installation wizard resulting in a restored O.S. ?!!
If not, please tell me what surprises are in store, and where I can find a reliable written resource to consult !!!
Thank-you.
Solved!
Go to Solution.

You're over-thinking this and making it harder than it needs to be. The manual isn't helping...
The BIOS is stored in non-volatile memory on the motherboard. One would probably call it firmware, not software. It is there regardless of what's on the HDD - or whether there's even an HDD installed.
Turn your machine off. Turn it on again. When you see the logo screen, hit F1 - multiple times if necessary. That gets you into the motherboard's BIOS configuration utility - what the manual is calling "Setup".
Here's a snip below from the T520 BIOS configuration utility (actually from the on-line BIOS simulator). In the StartUp tab you can see where UEFI/Legacy can be selected. You can configure UEFI boot there. Or "both". Or - probably - just select Setup Defaults, save, and exit.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can't restore from Disk Utility while booted from OS installation DVD

I'm absolutely astounded by this.
I have a new MacBook Pro 17". I restored my files to it and in short order, had it too full/fragmented to re-partition it for Boot Camp.
So I decided to image the disk and store that image file on a FireWire drive, wipe the system disk and restore it cleanly from the image file backup, hoping that would result in contiguous blocks used so that I could then re-partition for Boot Camp.
When booted off the OS X for Intel DVD-ROM disc (10.4.6 - the one that came with my MacBook Pro), if I get out of Installer and into Disk Utility, if I select the internal hard drive and click the Restore tab, I can easily select the hard drive backup image with the button. But the "Destination Disk:" box is only accessible via dragging the disk to the box.
There's one little problem - there is no Desktop, so the disk(s) do not appear on the Desktop. There is no way to drag the target disk to be restored to into the Destination Disk: box. You cannot drag a disk out from the little sidebar inside the Disk Utility window over to the Destination box. I tried. You can't drag any disk anywhere from that sidebar. It's clear that the only way to drag a disk anywhere is if it's shown on the Desktop in Finder (which isn't running when the installation DVD-ROM is booted from). There is simply no way that I can find to restore a disk drive from a saved backup disk image when booted from the installation DVD-ROM.
Please tell me I'm ******** and missing something, or if there's a Better Way to do this. (I can't seem to run Retrospect while booted off the DVD-ROM, so I can't restore from my Retrospect full backup of the disk, either. Joy!)
(I'm really curious if there's a Better Way - especially because it appears I can't boot from an external FireWire or USB 2.0 drive, so I need something that will work in this extremely limited installation DVD-ROM booted environment, I think.)
MacBook Pro 17" dual 2.16 GHz ; Mac OS X (10.4.6) Booted from Mac OS X for Intel 10.4.6 installation DVD-ROM

You can use an external bootable drive with a MacBook Pro -- check your manual or the built in help. Your problem is that for some reason, you can't install a bootable system on one. There are several reasons why Installer won't enable you to do so: insufficient space, incompatible partition scheme (should be GUID) or file system (should be HFS+ or similar), or wrong installation option selected.
It is possible this is related to why you can't drag the startup volume to the destination box in Disk Utility. It must be an HFS+ variant file system.
I think you should check carefully with D.U. the partition scheme of all your drives & the file system format of all the volumes involved. Also run repair disk, as someone has already pointed out.
The behavior with the Restore function is not normal -- you should be able to drag a volume to the destination box from the list.

What causes post software installation stall and how can I avoid it?

I never had this problem before with Jaguar, but since I installed Tiger this past December, when I've installed some software updates, my computer has not been restarting normally when I followed the instruction to "restart".
It shuts down, there's the pause, then the chime sounds. The screen lights up and the spinning beach ball appears. So far, so good. That, however, is as far as the process gets. The beach ball just spins and spins and spins. I was patient, but waited to no end. Finally, I disconnected the power cord and let the battery run down.
Finally the screen went dark. I let the computer stay like that overnight. The next day, I reconnected the power cord, the chime sounded and the
computer started up successfully and worked normally. And the software was installed. This has happened three times, every time with a software update.
I have repaired the permissions and done other disk first aid from my install disk CD. And I've run the Tech Tool utility.
I don't know if any of that will address the problem. So I hope some one can give
me some idea what the problem is and what will permanently eliminate it, before I venture into any future software updates.
Thanks

It is normal for a restart after an update or software installation to take much longer than normal, and generally it should be left to do its thing - but not overnight!
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 uses Safari 3.0.4 which is not a beta. If Safari 3.0.4 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692

Why am I getting a blue screen during windows support software installation?

After intalling windows 7 x64 (using boot camp 5.1), when I come to install windows support software to set up apple drivers for windows to run on my MacBook pro (late 2013), after installing a good number of drivers, I get suddenly a blue screen!....
What can I do, once windows is not strting up? It started well, but wth no proper drivers. Thanks.

I guess the first thing I would do would be to boot up using the original installation DVD and correct the permissions. That may not be the problem at all, it could be an incomplete upgrade install but at least you would know it isn't a permissions problem. I'd also run or verify the hard disk using this method.
How is it done? Turn machine on. Insert DVD 1 of the Install Disks, restart the machine, hold down the Command and the C keys (that tells the machine to look to the Rom drive and boot from it). Once it is up (will take a long minute or so...) go up to the top left where the install menu buttons are listed, look for the disk utility and run it. Tell it to verify and repair the disk and repair the permissions. Once done, quit the Disk Utility and select the restart option. Wait to see if your original desktop comes back.
If not, then you'll need to either "back out" the upgrade you installed or install your backup. If you don't have a backup you'll probably have to re-install OS X all over again (and probably lose all your previous data, apps, etc.). Let's hope it clears up first before you have to re-install.
Lisa

Where Can I Find The Fonts On My 2 Software Restore DVDs ?

Recently I completely erased my eMac and installed OSX Tiger from a Tiger DVD, which I then updated to OSX 10.4.10.
I was able to retrieve the original eMac applications from the Software Restore DVDs using Software Restore.
However, I have just discovered that the latest OS does not include all the previous fonts. Some of my favourites including Portago and Textile are missing.
I assume that these fonts are somewhere on the original eMac DVDs - but where are they and how do I get at them?
I have Pacifist but am not too sure about its use.
Ian.

Scroll down to the bottom of Kurt Lang's Font Management in Mac OS X Tiger and Panther

Software Installation Troubles

Bought Adobe Lightroom 3 from Amazon, opened new software and inserted disc into my iMac, it spins up and down 4 or 5 times for 30 seconds and spits it out. Closed everything, shut down and rebooted still won't install. Played a DVD & a CD just to test functionality and they worked. Went to Apple "Software Installation Quick Assist" where they tell you to "double click the disc icon on your desktop" and I don't see/can't find a disc icon. Any insight, help or suggestions are greatly appreciated.

Not exactly sure how this would work as I've got 4 GB 1067 MHz DDR3. However I did what you recommended and setup the new account with admin and unfortunately it didn't work as well. Thanks anyway.
Does anyone know if there could be something that could be blocking installations or managing them without revealing itself? I ran across a thread on another site that was referring to "Stuffit" as a possible problem but then the thread died before it got into what to do.

Software installation external audio interface fails Terratec dmx6 fire usb

Software installation external audio interface fails Terratec dmx6 fire usb.
Dear Apple Power User in this forum,
here is a question for some of us experts.
I have a external usb audio interface Terratec, Model: DMX 6 fire USB.
http://www.terratec.net/en/products/technical-data/produktetechnische_daten_en3246.html
0. There should be after install enclosing software an control app in the app folder, but it isnt there. Why?
1. the attached installer protocol seems to be normal. isnt it?
2. the usb audio hardware appears in system profiler.
3. there isnt the audio hardware in audio-midi-setup! Why?
4. one of the installed content is visibil in activity monitor as an extension "35 DMX6FireService root 0,0 1 964,00 KB 18,55 MB 22 Intel 00.01 176,00 KB 184,00 KB 73 72"
5. an other part is in the system-library-extension folder "TTDMX6fire.kext"
6. other files i am not capacity to find....
7. and there is the app missing in apps folder! Whitout that it can not work.
8. Software is for 10.5 and 10.6 32-bit tested from the vendor!?
9. My MacBookPro early 2008 2.4ghz is capabel of 64bit but is default in 32 mode says apple spec, also my osx 10.5.8 newest updates should be 32 bit. Isnt it?
10. installation tested whit disconnected/connected ext. volumes or display or these audio interface, whith repaired permissions, on two different macs (second is iMac), whit reboot,
11. tested on different usb ports, usb port test passed whith other equipment,
12. on windows xp all works.
13. tested on a new admin user, same problem.
14. searched whith terminal command line in applications, nothing.
15. get software from cd and homepage, no effect.
16. asked vendor: "until now never had problems like that"
any ideas? please help!
for testing or showing the installer look here:
http://www.terratec.net/en/driver-and-support/driver_21300.html?selectproduct=DM X%206Fire%20USB
Installation Protocol:
Dec 25 00:08:39 cadas-macbook-pro /System/Library/CoreServices/Installer.app/Contents/MacOS/Installer[400]: vm_allocate: 0, 0x5800000 - 0x25800000
Dec 25 00:08:39 cadas-macbook-pro /System/Library/CoreServices/Installer.app/Contents/MacOS/Installer[400]: vm_protect: 0
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: @(#)PROGRAM:Install PROJECT:Install-388
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: @(#)PROGRAM:Installer PROJECT:Installer-281
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Hardware: MacBookPro4,1 @ 2.40 GHz (x 2), 4096 MB RAM
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Running OS Build: Mac OS X 10.5.8 (9L30)
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: TMPDIR=/var/folders/gC/gCDdYZuFE98Z28wIB40BeE+TI/-Tmp-/
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: SHELL=/bin/bash
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: HOME=/Users/cada
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: USER=cada
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: LOGNAME=cada
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: DISPLAY=/tmp/launch-MQSZjG/:0
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: SSHAUTHSOCK=/tmp/launch-x3IAC1/Listeners
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: ApplePubSub_SocketRender=/tmp/launch-YalWkk/Render
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: _CF_USER_TEXTENCODING=0x1F5:0:3
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: SECURITYSESSIONID=a1b410
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: COMMAND_MODE=unix2003
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: DMX6fireUSB Installation Log
Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Opened from: /Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg
Dec 25 00:08:39 cadas-macbook-pro installdb[402]: started (uid 96)
Dec 25 00:08:39 cadas-macbook-pro installdb[402]: Opened receipt database on '/' with schema 17.
Dec 25 00:08:45 cadas-macbook-pro installdb[402]: done. (0.004u + 0.003s)
Dec 25 00:09:10 cadas-macbook-pro runner[403]: Administrator authorization granted.
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: =============================================================================== =
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: User picked Standard Install
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Choices selected for installation:
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "DMX6fireUSB"
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "DMX6FireUSBCpl"
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#dmx6fireusbcpl.pkg : com.terratec.dmx6fireusb.pkg : 1
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#ttdmx6fire.pkg : com.terratec.dmx6fireusb1.pkg : 1
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "TTDMX_6fire_CUSTOMEXT"
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#ttdmx6firecustomext.pkg : com.terratec.dmx6fireusb2.pkg : 1
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "TTDMX6fire"
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#ttdmx6fire-1.pkg : com.terratec.dmx6fireusb3.pkg : 1
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "DMX6FireService"
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#dmx6fireservice.pkg : com.terratec.dmx6fireservice3.pkg : 1
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "LaunchDaemon"
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#comterratecdmx6fire.pkg : com.terratec.dmx6fireusb4.pkg : 1
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: =============================================================================== =
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: It took 0.00 seconds to summarize the package selections.
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#dmx6fireusbcpl.pkg
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#ttdmx6fire.pkg
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#ttdmx6firecustomext.pk g
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#ttdmx6fire-1.pkg
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#dmx6fireservice.pkg
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#comterratecdmx6fire.pk g
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: _installNextPackage of 1
Dec 25 00:09:15 cadas-macbook-pro installdb[405]: started (uid 96)
Dec 25 00:09:15 cadas-macbook-pro installdb[405]: Opened receipt database on '/' with schema 17.
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Starting installation:
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Preparing volume "250GB_MBPro2" for installation
Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Configuring volume "250GB_MBPro2"
Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Preparing disk for local booted install.
Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Free space on "250GB_MBPro2": 11,6 GB (12495523840 bytes).
Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Create temporary directory "/private/tmp/dmx6fireusb.pkg.400aysS6s"
Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Running install actions
Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Processing dmx6fireusbcpl:
Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Determining files to install
Dec 25 00:09:16 cadas-macbook-pro Installer[400]: It took 0.06 seconds to create the install plan for dmx6fireusbcpl.
Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Configuring deferred files
Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Determining obsolete files
Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Assembling temporary receipt
Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
Dec 25 00:09:16 cadas-macbook-pro Installer[400]: run preupgrade script for dmx6fireusbcpl
Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.pCJk/./preflight[408]: : deleting previous Kernel Extensions
Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.pCJk/./preflight[408]: PID: 43
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: Initializing new flat-package receipt.
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: Extracting...
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: 20 of 20 files written in 0.05 seconds.
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: 408 kilobytes installed at 7.5 MB/s.
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb.pkg.bom"
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing ttdmx6fire:
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.03 seconds to create the install plan for ttdmx6fire.
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: Initializing new flat-package receipt.
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: Extracting...
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: 9 of 9 files written in 0.01 seconds.
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: 92 kilobytes installed at 11.5 MB/s.
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb1.pkg.bom"
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing ttdmx6firecustomext:
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for ttdmx6firecustomext.
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: Initializing new flat-package receipt.
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: Extracting...
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: 9 of 9 files written in 0.01 seconds.
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: 80 kilobytes installed at 9.7 MB/s.
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb2.pkg.bom"
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing ttdmx6fire-1:
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for ttdmx6fire-1.
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: run preupgrade script for ttdmx6fire-1
Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.MEBZ/./preflight[424]: : deleting previous Kernel Extensions
Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.MEBZ/./preflight[424]: PID:
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: Initializing new flat-package receipt.
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: Extracting...
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: 9 of 9 files written in 0.03 seconds.
Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: 832 kilobytes installed at 26.2 MB/s.
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb3.pkg.bom"
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing dmx6fireservice:
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for dmx6fireservice.
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: Initializing new flat-package receipt.
Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: Extracting...
Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: 2 of 2 files written in 0.01 seconds.
Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: 136 kilobytes installed at 13.4 MB/s.
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Performing post-extraction actions
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finishing receipt
Dec 25 00:09:18 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireservice3.pkg.bom"
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Processing comterratecdmx6fire:
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Determining files to install
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for comterratecdmx6fire.
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Configuring deferred files
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Determining obsolete files
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Assembling temporary receipt
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Removing obsoleted files
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Creating destination path
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Validating package payload
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Starting file extraction
Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: Initializing new flat-package receipt.
Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: Extracting...
Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: 2 of 2 files written in 0.01 seconds.
Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: 8 kilobytes installed at 1.0 MB/s.
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Performing post-extraction actions
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finishing receipt
Dec 25 00:09:18 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb4.pkg.bom"
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Removing temporary directory "/private/tmp/dmx6fireusb.pkg.400aysS6s"
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finalize disk "250GB_MBPro2"
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Notifying system of updated components
Dec 25 00:09:18 cadas-macbook-pro runner[403]: Touched '/System/Library/Extensions'
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: _installNextPackage of 0
Dec 25 00:09:18 cadas-macbook-pro Installer[400]:
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: ** Summary Information **
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Operation Elapsed time
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: -----------------------------
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: script 0.29 seconds
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: zero 0.02 seconds
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: install 1.42 seconds
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: validate 0.01 seconds
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: os 0.00 seconds
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: extract 0.87 seconds
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: receipt 0.05 seconds
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: disk 1.01 seconds
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: config 0.19 seconds
Dec 25 00:09:18 cadas-macbook-pro Installer[400]:
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Starting installation:
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finalizing installation.
Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Registering applications
Dec 25 00:09:18 cadas-macbook-pro runner[403]: Touched '/Applications/./DMX6FireUSBCpl.app'
Dec 25 00:09:18 cadas-macbook-pro runner[403]: Touched '/Applications/.'
Dec 25 00:09:19 cadas-macbook-pro Installer[400]: IFDInstallController 868C80 state = 5
Dec 25 00:09:19 cadas-macbook-pro Installer[400]: Displaying 'Install Succeeded' UI.
Dec 25 00:09:24 cadas-macbook-pro installdb[405]: done. (0.026u + 0.040s)

solved whith the old driver vom archive of vendor: "DMX6Fire_USBMac.1.00c.dmg" thats for 10.5.x for me works.
The newest from the vendor delivered driver 1.22 (marked for 10.5 and 10.6) seems to not work under 10.5.

Panther software installation DVD 1 of 2 missing

Similar Messages

Maybe you are looking for