Panther won´t boot at all, Grey screen with apple logo

Help, I installed a Lexmark 1420 this afternoon and printed what I wanted and switched off! that was the last time my emac booted. I only now get they grey Apple logo on the screen, I´ve already tried pram reset, boot with x with shift even the software restore cd won´t read(but I can open the cd draw with the mouse held down.) I been looking through the messages and still can´t find any answers, would be really greatful for some help.
Stuart

Stuart:
Sorry about the glitch. That Disk Utility reports "Underlying task reported failure" when repairing a volume is a serious directory issue that can sometimes be repaired by Disk Warrior.
In terms of getting you data off the HDD to the external Firewire HDD, here are two options.
1. You can use SuperDuper to create a bootable clone of your entire HDD on the external firewire HDD.
2. You can purchase DataRescue II to get your music off. I understand Prosoft has excellent tech support. Give them a call. See also Dr. Smoke's FAQ Data Recovery.
Please keep us updated.
Good luck.
cornelius

Similar Messages

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.

If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

Computer won't start, grey screen with Apple logo only. Ideas?

Last night my wife's G5 froze. It is a G5 2.0 running OS X 10.4.11. I shut it down (had to use the power button) and tried to restart. No luck, just made it to the grey screen with Apple logo and spinning wheel. After a few seconds the Apple logo disappeared and a black box took its place, then the wheel stopped spinning. It was late, decided top wait until morning before trying again.
This morning I tried to start up again. This time got a warning(?) in upper left that a Firmtek item had already started. I'm sorry I didn't write this all down at the time, so I don't remember the entire message. Since there is a Firmtek card installed in one of the PCI slots I thought that might be the problem, and I pulled the card, as well as another Adaptec card that was also installed. Tried to start again, got to grey screen with Apple but this time no spinning wheel.
Opened media slot manually and inserted Diskwarrior. Tried to start with Diskwarrior but again only reached grey screen. Let run for ~5 minutes, until fans started to run and were begining to get noisy.
Next I reset the PRAM. No luck, still stuck on grey screen. Tried Diskwarrior again, this time got another message in upper left. Here is most of it -
System Failure : cpu=1; code=60000009 (Invalid pmap)
Lateset crash info for cpu1;
Exception state (sv=0x609bb280)
PC=0x000a4ad0; MSR=0x02003000 followed by more similar strings, then
backtrace terminated - unaligned frame address; 0xfc088891
So what's the diagnosis? I've had various issues with my G5s in the past, but have never had one refuse to boot with Diskwarrior before.
Thanks in advance for any help!

Whew, could be many things, from RAM, (or RAM slots/solder issue), to CPU #1 being bad, (CPU#1 is actually the second one.
Does it boot into any of these modes?
Target mode...
http://support.apple.com/kb/HT1661
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
We might get clues with verbose mode...
http://support.apple.com/kb/HT1492

Grey Screen with Apple Logo - HELP

First of all: I know there is another topic for this, but this is a different problem (i think?)
I was installing snow leopard... it came up with that green tick with restart below it. It shut down and when it booted up it went to the grey screen with apple logo and it hung there for 6 hours until I turned it off. The disc is still stuck in there (tried holding in the mouse button) and it won't come out. I also held in the C button which made the disc drive make a lot of noise.
Any help would be appreciated.

Here there is a lot of topic about that subject.
By any change, have you completed all upgrade that your mac asked you before installing 10.6?
If yes, you're in this situation: http://support.apple.com/kb/TS2990 , you can try to install it again. Some people said that it took them 3 times to make it works.

My macbook pro 2011 shows grey screen with apple logo and want start

i was just using my macbook pro and it freezed for a while not responding and i turned it off by pressing the power button. afterwards, i turn it on and it shows a grey screen with apple logo but want start pls somebody help me because am having "my life" on the machine

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Grey screen with apple logo after new HDD install

I have a mid 2010 iMac A1312, this was given to me recently with the knowledge of its bad HDD, so I bought a new HDD. I followed step by step instructions on how to replace a Hard drive and I did. I switched the computer on and inserted my Snow Leopard 10.6.3 install disk and clicked the icon. It is now at a light grey screen with a dark Apple logo. I have waited about ten minutes and restarted the machine. Ive tried all variances of startup holding down c, option, command r and so forth. Currently I am going to give it a good long wait of 20 minutes or so and see if I was just being impatient and not allowing the install software chance to start up. But in the mean time... any suggestions? I have read I need the original disks that came with the computer from factory to get a new HDD going. Is this true? thank you for your time!

it has now been 30 minutes and no change. I still have the grey screen with apple logo. please help

I have snow leopard installed as an OS. When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol. What can I do?

I have snow leopard installed as an OS. When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol. What can I do?

Maybe this might help.
http://support.apple.com/kb/TS2570

Start up screen stuck on grey screen with apple logo and spinning gear

Start up screen is stuck on grey screen with apple logo and spinning gear. What should I do?

See this thread with dominic23’s suggestions: https://discussions.apple.com/thread/5783326?tstart=0

Hi my iMAc 27 inch starts up to the grey screen with apple logo and loading bar underneath it loads halfway then freezes up and shut down after a while please help

Hi my iMAc 27 inch starts up to the grey screen with apple logo and loading bar underneath it loads halfway then freezes up and shut down after a while please help

Try the tips listed here Mac OS X: Gray screen appears during startup - Apple Support

HT204347 Hi my serial number on bottom of my mac is W8*******66E when l try to try the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not

Hi my serial number on bottom of my mac is W8******66E when l try to turn the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not worked?
<Edited by Host>

What other solutions have you tried?
This may help you:
https://discussions.apple.com/docs/DOC-3353
Ciao.

My iMac wont go past the grey screen with Apple Logo and question mark a caution mark

My iMac wont go past the grey screen with Apple Logo and question mark a caution mark

You may find this support article helpful:
http://support.apple.com/kb/TS2570
Ciao.

Powerbook won;t go past grey screen with apple logo on start up

Hi
I am getting very stressed, my powerbook g4 won;t go past the grey screen with the apple logo when switched on. I need to sort it ideally without another computer to go through but if that is necessary then I will do it. I have tried the RAM reboot but nothing, there is not even the spinning loading symbol just a grey screen - which it will stay on until I turn it off. Someone please help!!!!!!!!!!!!! Not sure of my OS as I can't turn my comp on, but I am running leopard on it

Welcome!
First, see if you can boot in Safe Mode, holding the Shift key during startup until you see a message about safe mode. Getting a desktop can take longer because Safe Mode forced some disk checking.s
...I am running leopard on it
Then you should have the install disks. They can be used to boot the computer for repair. Insert the DVD and press and hold the "c" key during startup. That will launch the installer BUT you don't want to reinstall yet. Find the install's Utilities menu and launch Disk Utility. From there you can check the hard drive and make some repairs.
I need to sort it ideally without another computer to go through but if that is necessary then I will do it
That would require that your compute work enough to start in FireWire Target Disk Mode. FWTDM lets your hard drive show up on another Mac as if it were an external drive. You can test by starting the computer and holding the "t" key until you get a blue screen with a big yellow FireWire symbol. Looks like this:
!http://t3.gstatic.com/images?q=tbn:ANd9GcT8uGcDJDrUrECaelR5ash9yA3zuGBakhxrJ9TjfjO_uoCmKQ&t=1&usg=_5RiQv2QkO7UuPLUpiige1MVxdb0=!
I believe FWTDM's code is in firmware and not on the hard drive , so may let yo uaccess the disk form another computer.

Stuck on grey screen with apple logo after failed iTunes update

I tried to install an update for iTunes 9.2 on my MacBook. During installation a box appeared telling me the update had failed. I clicked the 'Restart' button. Now it won't go past the grey screen with the apple logo and the rotating wheel; it just loads indefinitely. I have a very important document saved on the Mac which I've added to without backing it up. I'm worried that I will lose (or have already lost) a great deal of writing. Is there a way to get my computer running again without damaging my files? Because this computer was a gift, I don't have the software installation CDs that came with it (or Disk Utility). I'm also not very familiar with computers in general, so if you explain your solutions in a really basic way, I'd appreciate it. Any kind of advice would be extremely welcomed...

This one?
http://docs.info.apple.com/article.html?artnum=106214
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
* Last Modified: June 25, 2009
* Article: TS1417
* Old Article: 106214
[Email this article]
[Print this page]
Symptoms
If your computer won't start up normally, you may need to use a disk repair utility to fix the issue. Mac OS X includes two utilities for this—Disk Utility and fsck (a command-line utility). You can also use these even when your computer starts just fine but you want to check the disk for possible file system issues. For Mac OS X 10.4.3 or later, check out "About live verification in Mac OS X 10.4.3 or later," below.
Important: If you're using Mac OS X 10.4 or later, you should use Disk Utility instead of fsck, whenever possible.
In some situations, file system errors may prevent your computer from starting up. This can occur after an improper shutdown, forced restart, or power interruption. If your computer shows any of the following symptoms on startup, use a disk repair utility:
* Your computer partially starts but then displays a command line in a text-only environment. You may see the message, "file system dirty, run fsck." Below it, you'll see what's called a command-line prompt, indicated by a number sign (#), that allows you to type a command. If you see this, you'll need to run fsck from the command line (see "Use fsck if necessary," below).
* Your computer starts but either it won't reach the login screen, or it may reach the login screen but not load the Desktop after you log in. However, you can start up in single-user mode.
If your computer exhibits either of the above issues, here are some things to try to get your computer back to starting up properly again. If you can't find the system discs that came with your computer, see "Use fsck," below.
Products Affected
Mac OS X 10.4, Mac OS X 10.3, Mac OS X 10.2, Mac OS X 10.1
Resolution
Try a Safe Boot
If you're using Mac OS X 10.2 or later, you can start up your computer in Safe Mode, which includes an automatic disk check and repair. If you're using Mac OS X 10.1.5 or earlier, skip to the next section. A Safe Boot, which starts up your computer into Safe Mode, may allow you to start up your computer successfully using a reduced version of the system software. To do this, follow these steps:
1. Start up in Safe Mode.
2. After the system has fully started up, restart your computer again normally.
If the computer successfully restarts, you do not need to do any more troubleshooting. If the issue persists, try Disk Utility.
Try Disk Utility
1. Start from your Mac OS X Install disc: Insert the installation disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Tip: Always start up your computer from an Install or Restore disc when using Disk Utility to verify or repair your startup volume. Otherwise, you might see some disk error messages.
Use fsck if necessary
fsck is a command-line utility that may be able to verify and repair a disk. If you can successfully start up in Safe Mode or use Disk Utility while started up from a disc, you don't need to use fsck. Here are some situations in which fsck may be necessary.
* Your Mac OS X disc isn't available.
* Your optical drive isn't available.
* You can't start with a Safe Boot by holding the Shift key during start up.
Tip: If you use a Mac OS X Extended (Journaled) formatted volume, such as with Mac OS X 10.3 or later, you probably won't need to use fsck. If you do use it for any reason, please be aware that benign error messages can appear.
If you're not sure how your volume is formatted and you can't start up from your Mac OS X volume to find out, type the following command in a command-line interface and then press Return: diskutil info /
If you see "File System: Journaled HFS+" returned, you have a Journaled volume.
To use fsck, you must run it from the command line. Unlike using your mouse pointer to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt type:
/sbin/fsck -fy
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
** The volume (nameofvolume) appears to be OK
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
*** FILE SYSTEM WAS MODIFIED ***
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
Your computer should start up normally and allow you to log in.
Additional Information
About live verification in Mac OS X 10.4.3 or later
In Mac OS X 10.4.3 or later, you can verify your Mac OS X volume while started from it. This is known as live verification, and can be used in three different ways.
Option 1: Verify your disk using Disk Utility while started from the startup disk. To find out how to do this, see this article. Please note that live verification does not involve any disk repair, so if verification finds something that should be repaired, start up from your Mac OS X Install disc and use Disk Utility as described above in "Try Disk Utility."
Option 2 (advanced): Use the command line and the command-line utility, diskutil.
1. Start up your computer and log in as an administrator.
2. Open Terminal (/Applications/Utilities).
3. At the prompt, type the following command and then press Return:
diskutil verify /
Note: Don't use this method to check non-startup volumes.
You should see messages such as the following during the disk check:
Could not unmount disk for verification, attempting live verify
Started verify/repair on volume disk0s3 Macintosh HD
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
Verify/repair finished on volume disk0s3 Macintosh HD
Option 3 (advanced): Use the command line and the fsck_hfs -l command.
1. Start up your computer and log in as an administrator.
2. Open Terminal (/Applications/Utilities).
3. At the prompt, type the following command and then press Return to determine your filesytem ID:
df -hl
4. Look for some lines of text that look like this:
Filesystem Size Used Avail Capacity Mounted on
/dev/disk0s3 37G 20G 17G 55% /
/dev/disk0s5 37G 37G 641M 98% /Volumes/Storage
5. Make a note of the first "disk" name that appears after /dev/, such as "disk0s3." This is your filesystem ID for your startup volume.
6. At the prompt, type the following command and then press Return:
df -hl
7. Then type the following command, where "disk0s3" is your filesystem ID you noted in step 4, then press Return:
sudo fsck_hfs -l /dev/disk0s3
8. When prompted, enter your admin password, then press Return to begin the verification.
9. You should see messages like these during the disk check:
** /dev/rdisk0s3 (NO WRITE)
** Root file system
** Checking HFS Plus volume.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking multi-linked files.
** Checking Catalog hierarchy.
** Checking Extended Attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume Macintosh HD appears to be OK.
Advanced information
If you're interested in UNIX-style command-line syntax, here's a look at how a couple of flags used above can influence fsck:
* The -y flag: Tells fsck that you want to answer "yes" to all questions about fixing, repairing, or salvaging information. This is the optimal approach, as answering "no" to any question causes fsck to stop. You cannot determine that all necessary repairs have been made until fsck completes and gives its final report.
* The -f flag: Forces fsck to check "clean" filesystems when preening.
See also
* Handling "overlapped extent allocation" errors reported by Disk Utility or fsck
* Disk Utility reports "Underlying task reported failure" when repairing a volume

Accidently deleted /var/vm, stuck on grey screen with apple logo.

I deleted the entire vm folder and now my MacBook Pro won't get beyond the grey screen with the apple logo. I don't have any recovery discs with me. What can I do to rescue my MacBook Pro?
Thanks in advance.

Very true, you could enable the Finder to show hidden files and then restore just the vm folder with that.
The /var/vm folder is just used to store the sleep image and swap file for OS X, so you should be able to simply recreate it using the Terminal in the Recovery HD partition, and not have to deal with reinstalling or restoring.
To do this, select Terminal from the Utilities menu in the OS X Tools interface (when you boot to the Recovery HD partition). Then enter the following commands:
mount -uw /Volumes/Macintosh\ HD/
mkdir /Volumes/Macintosh\ HD/var/vm
After doing this, use Disk Utility to repair permissions, and then restarting should have OS X use the folder for the sleep image and swap files.
Message was edited by: Topher Kessler

Computer doesn't boot, stuck in white screen with Apple logo

I got a friend that has a MacBook 2.0GHz, Black. The computer had some sort of problem so he took out the HD and placed it into another computer (MacBook 2.2GHz, Black). For some reason whenever the computer boots, it gets stuck in the white screen with the gray Apple logo, and shows up a bar, as if it's loading some sort of firmware update. It never advances, and it doesn't go thru.
If he takes the same HD and puts it into an enclosure, first it would take a while to mount in another computer, and afterwards it would give some errors, but now it doesn't even load.
Before he had the issue with his original computer everything was working fine, and there was no update going on when the computer got broken. The problem that that computer has isn't related to the HD.

If you have physically removed the drive and connected it to another computer and it "took a while to mount" then it sounds like the drive itself is failing. Hopefully he maintains backups.
Boot the MacBook in "verbose" mode (press and hold down option+v while powering up)
http://support.apple.com/kb/HT1492
In this mode you will see all the boot messages scroll by instead of the typical white screen with Apple logo. You will likely be able to see messages indicating what the computer is trying to do -- for example messages indicating that having failures or retrying to read the hard drive.
The access arms on hard drives have to be precisely located above the "tracks" on the disk in order to read data. As the drive ages & wears, the accuracy of the arms can become sloppy, causing the read/write head to no longer be precisely located over a track. This results in failure to read correctly. Most drives have a useful life of about 5 years -- after which the failure rate will go up substantially. Fortunately, replacement hard drives are cheap.

Panther won´t boot at all, Grey screen with apple logo

Similar Messages

Maybe you are looking for