Pantone W530 Color Sensor help needed eccm25sens​orData.dat read error
New Benzel installed to fix a bad track pad
On restart color sensor demanded re-calibration.
Error 22 message said ECCM25sensorData.dat file had a read error.
I can not locate file to install.
The Lenovo paid support solution was to suggest a full re install.!!
That is nuts, kind of like replacing a car engine because of a bad spark plug.
Anyone have a clue or work around?
And yes I tried unistalling and reinstalling the following: http://support.lenovo.com/us/en/downloads/ds015010
I get three buzz error when try initial calibration which then instructs to use the Sensor Replacement Utility which results in the error message.
Seem Windows 8 folks are having the same problem. What is up Lenovo??????????
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/windows-8-pantone-driver/m-p/1034813#U1034813
Windows 7 machine
Thanks!
Similar Messages
-
Help needed please -Master data loading- error with text loading.
Hi,
Iam S.Sushma. Iam getting error while loading master data from flat file- attributes and texts.
I have loaded attribute data successfully. But when iam monitoring the text data then iam getting following error.
""SET THE LANGUAGE FIELD IN THE SOURCE SYSTEM-LONG TEXT.""
""RECORD1: SRPID_1:DATA RECORD 1(EN S):DUPLICATE DATA RECORD.
"ERROR 4 IN UPDATE"
I took 2flat files for attributes and texts.
SRPID is key field.(sales representative id)
attributes:- SRPID, NAME1, AGE1, ADD1,PHONE1.
text:- SRPID,LANG,SHTXT,MDTXT,LGTXT.
Iam just a begginer so need your guidence. Thank you in advance.
Message was edited by: sushma sandepogu
Message was edited by: sushma sandepoguHi Eugene,
Thank you for your guidence. I have changed the order in flat file and got the results successfully. But when iam viewing the Master data text the S10 in coming in 2nd position in maintain master data-list screen i mean :-
SRPID LANG NAME AGE ADD PHONE SHTXT MDTXT LGTXT
S1 EN ABC 34 GDS 1234 AS ASD ASDDF
S10
S2
S3
S9.
Iam not understading why. Hope yu can help me. I have assigned full points to you for your previous solution.
Thank you in advance.
S.Sushma. -
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help............... -
About Java 2 opaque font color question, help needed!
About Java 2 opaque font color question, help needed!
I was trying to test opaque font (the string has a foreground color and a background color), but i can't find the method for doing that.
i can change foreground by Graphics2D.setPaint(Color.black).
Anybody know how to change the background of the string?
Thanks!Hi. The way I'd do it would be to use the font metrics to find the length of a string and draw a rectangle and then drawstring over the rectangle. If you want an example, I can post it although I suspect theres a better way.
-
W530 Color Sensor adding possible?
I've bought a couple of weeks ago the W530 2438CTO, Full-HD, K2000M, Core I5-3320M, 8GB RAM without Color Sensor and no Fingerprint Reader. And I wonder why it was and still is impossible to order the W530 Core I5-3320M with Color Sensor, though the Palmrest has the hole for the sensor. That's really interesting, because the screen shows a much too high red level, which burns the eyes. And so far I understand, it's a common problem with that screen, according to the statements in the forum.
Now my question, does anyone know if it's possible to order and add the Color Sensor on my own - I'm a technician and know how to maintain Laptops. And if it's possible, does the Color Sensor calibrate the way to high red level of the screen to a normal color level?
I found a list of FRU: http://download.lenovo.com/parts/ThinkPad/W530_FRU_BOM_v2.pdf
Thanks to everyone for ya help :-)
Solved!
Go to Solution.That panel is used on T510, T520 and T530
-
Help needed on meta data export
I need a meta data export dump of a source database of two schemas and import to a fresh new database.
COuld you please help with the steps to be followed.Assuming you are using 10g and exp utility
You can say rows=N
exp help=yes
Export: Release 10.2.0.1.0 - Production on Thu Jul 23 13:36:59 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
You can let Export prompt you for parameters by entering the EXP
command followed by your username/password:
Example: EXP SCOTT/TIGER
Or, you can control how Export runs by entering the EXP command followed
by various arguments. To specify parameters, you use keywords:
Format: EXP KEYWORD=value or KEYWORD=(value1,value2,...,valueN)
Example: EXP SCOTT/TIGER GRANTS=Y TABLES=(EMP,DEPT,MGR)
or TABLES=(T1:P1,T1:P2), if T1 is partitioned table
USERID must be the first parameter on the command line.
Keyword Description (Default) Keyword Description (Default)
USERID username/password FULL export entire file (N)
BUFFER size of data buffer OWNER list of owner usernames
FILE output files (EXPDAT.DMP) TABLES list of table names
COMPRESS import into one extent (Y) RECORDLENGTH length of IO record
GRANTS export grants (Y) INCTYPE incremental export type
INDEXES export indexes (Y) RECORD track incr. export (Y)
DIRECT direct path (N) TRIGGERS export triggers (Y)
LOG log file of screen output STATISTICS analyze objects (ESTIMATE)
{color:red}*ROWS export data rows (Y)* {color} PARFILE parameter filename
CONSISTENT cross-table consistency(N) CONSTRAINTS export constraints (Y)
OBJECT_CONSISTENT transaction set to read only during object export (N)
FEEDBACK display progress every x rows (0)
FILESIZE maximum size of each dump file
FLASHBACK_SCN SCN used to set session snapshot back to
FLASHBACK_TIME time used to get the SCN closest to the specified time
QUERY select clause used to export a subset of a table
RESUMABLE suspend when a space related error is encountered(N)
RESUMABLE_NAME text string used to identify resumable statement
RESUMABLE_TIMEOUT wait time for RESUMABLE
TTS_FULL_CHECK perform full or partial dependency check for TTS
TABLESPACES list of tablespaces to export
TRANSPORT_TABLESPACE export transportable tablespace metadata (N)
TEMPLATE template name which invokes iAS mode export
Export terminated successfully without warnings. -
Help needed to insert data from different database
Hi ,
I have a requirement where i need to fetch data from different database through database link .Depending on user request , the dblink needs to change and data from respective table from mentioned datbase has to be fetched and populated .Could i use execute immediate for this, would dblink work within execute immediate .If not , could pls let me know any other approach .What does "the dblink needs to change" mean?
Are you trying to dynamically create database links at run-time? Or to point a query at one of a set of pre-established database links at run-time?
Are you sure that you really need to get the data from the remote database in real time? Could you use materialized views/ Streams/ etc to move the data from the remote databases to the local database? That tends to be far more robust.
Justin -
Color Picker - help needed..maybe for Barb B.
I was using the color picker this afternoon and, all of a sudden, I noticed the ‘not safe for web’ cube alert.. and I have never noticed it before. Any color I select from any image (including ones already posted on the internet) give me that warning… What did I do to bring this about? I must have inadvertently clicked on something…
Secondly, I also note that when I click on a color in the color picker I get a little circle that stays there…again.. what on earth did I do?
Help??? Thank you!That "unsafe for Web" alert is an outdated relic from the ancient past of personal computing. Just ignore it.
The so-called "Web safe" colours never were of any use, just a misguided attempt at standardization. Again, don't bother with it.
Ken -
Pros help needed with post data code
i needed to change the code below to post the userAnswer from radio button group, to an ASPX page so i can read the data in and post it to a database. can anyone help. thanks
btnCheck.addEventListener(MouseEvent.CLICK, checkAnswer);
function checkAnswer(evt:MouseEvent):void {
userAnswer = String(rbg.selectedData);
messageBox.text = userAnswer + " has been clicked";//Create the loader object
var prodloader:URLLoader = new URLLoader ();
//Create a URLVariables object to store the details
var variables: URLVariables = new URLVariables();
//Createthe URLRequest object to specify the file to be loaded and the method ie post
var url:String = "url here";
var prodreq:URLRequest = new URLRequest (url);
prodreq.method = URLRequestMethod.POST;
prodreq.data = variables;
function submitHandler(event:Event):void {
variables.productId = whatever;
prodloader.load(prodreq);
btnSubmit.addEventListener(MouseEvent.CLICK, submitHandler);
function contentLoaded(event:Event):void {
//Stuff here
prodloader.addEventListener(Event.COMPLETE, contentLoaded); -
Help needed in inserting data using a query
I need to have some data as a result of the following query:
select sched_num,load_id,ord_id,split_id from ord_load_seq
where (ord_id,split_id,sched_num) in (select ord_id,split_id,sched_num from ord_load_seq where seq_num = '2'
group by ord_id,split_id,sched_num having count(1) >1)
order by ord_id,split_id,sched_num;
But currently it retunrns no rows. The problem is in the having count(1)> 1 clause.
When i make =1, it returns rows. But no rows on > 1. I even tried inserting some rows to get the result >1
But still the query on a whole returns no rows.Please help.ohhh... lets start our lesson children:
here is code to consider:
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.2.0
SQL>
SQL> --Q1
SQL> with tbl as
2 (select 1 fld1, 1 fld2, 1 fld3 from dual
3 union all
4 select 1 fld1, 1 fld2, 2 fld3 from dual
5 union all
6 select 1 fld1, 1 fld2, 3 fld3 from dual
7 union all
8 select 1 fld1, 2 fld2, 3 fld3 from dual
9 union all
10 select 1 fld1, 3 fld2, 3 fld3 from dual)
11 select fld1, fld2, fld3 from tbl
12 order by fld1, fld2, fld3
13 /
FLD1 FLD2 FLD3
1 1 1
1 1 2
1 1 3
1 2 3
1 3 3
SQL> --Q2
SQL> with tbl as
2 (select 1 fld1, 1 fld2, 1 fld3 from dual
3 union all
4 select 1 fld1, 1 fld2, 2 fld3 from dual
5 union all
6 select 1 fld1, 1 fld2, 3 fld3 from dual
7 union all
8 select 1 fld1, 2 fld2, 3 fld3 from dual
9 union all
10 select 1 fld1, 3 fld2, 3 fld3 from dual)
11 select fld1, fld2, fld3, count(1) from tbl
12 group by fld1,fld2,fld3
13 order by fld1, fld2, fld3
14 /
FLD1 FLD2 FLD3 COUNT(1)
1 1 1 1
1 1 2 1
1 1 3 1
1 2 3 1
1 3 3 1
SQL> --Q3
SQL> with tbl as
2 (select 1 fld1, 1 fld2, 1 fld3 from dual
3 union all
4 select 1 fld1, 1 fld2, 2 fld3 from dual
5 union all
6 select 1 fld1, 1 fld2, 3 fld3 from dual
7 union all
8 select 1 fld1, 2 fld2, 3 fld3 from dual
9 union all
10 select 1 fld1, 3 fld2, 3 fld3 from dual)
11 select fld1, fld2, fld3 from tbl
12 group by fld1,fld2,fld3
13 having count(1) > 1
14 order by fld1, fld2, fld3
15 /
FLD1 FLD2 FLD3
SQL> --Q4
SQL> with tbl as
2 (select 1 fld1, 1 fld2, 1 fld3 from dual
3 union all
4 select 1 fld1, 1 fld2, 2 fld3 from dual
5 union all
6 select 1 fld1, 1 fld2, 2 fld3 from dual
7 union all
8 select 1 fld1, 1 fld2, 3 fld3 from dual
9 union all
10 select 1 fld1, 2 fld2, 3 fld3 from dual
11 union all
12 select 1 fld1, 3 fld2, 3 fld3 from dual)
13 select fld1, fld2, fld3 from tbl
14 order by fld1, fld2, fld3
15 /
FLD1 FLD2 FLD3
1 1 1
1 1 2
1 1 2
1 1 3
1 2 3
1 3 3
6 rows selected
SQL> --Q5
SQL> with tbl as
2 (select 1 fld1, 1 fld2, 1 fld3 from dual
3 union all
4 select 1 fld1, 1 fld2, 2 fld3 from dual
5 union all
6 select 1 fld1, 1 fld2, 2 fld3 from dual -- inserted duplicate row
7 union all
8 select 1 fld1, 1 fld2, 3 fld3 from dual
9 union all
10 select 1 fld1, 2 fld2, 3 fld3 from dual
11 union all
12 select 1 fld1, 3 fld2, 3 fld3 from dual)
13 select fld1, fld2, fld3, count(1) from tbl
14 group by fld1,fld2,fld3
15 order by fld1, fld2, fld3
16 /
FLD1 FLD2 FLD3 COUNT(1)
1 1 1 1
1 1 2 2
1 1 3 1
1 2 3 1
1 3 3 1
SQL> --Q6
SQL> with tbl as
2 (select 1 fld1, 1 fld2, 1 fld3 from dual
3 union all
4 select 1 fld1, 1 fld2, 2 fld3 from dual
5 union all
6 select 1 fld1, 1 fld2, 2 fld3 from dual -- inserted duplicate row
7 union all
8 select 1 fld1, 1 fld2, 3 fld3 from dual
9 union all
10 select 1 fld1, 2 fld2, 3 fld3 from dual
11 union all
12 select 1 fld1, 3 fld2, 3 fld3 from dual)
13 select fld1, fld2, fld3 from tbl
14 group by fld1,fld2,fld3
15 having count(1) > 1
16 order by fld1, fld2, fld3
17 /
FLD1 FLD2 FLD3
1 1 2
SQL> Q1. As you may see we have an bunch of data where each row is unique combination of the columns value.
Q2. lets try to group it by fld1 and fld2 and fld3 columns. We don't expect any miracle and got the same data as Q1. Why? Because each row is unique combination(group) in scope of fld1, fld2, fld3 - count(1) exactly shows us that.
Q3. Q2 is explanation why we got no rows filter (having count(1) > 1)because the result of the clause is always false.
Q4. Lets put some duplication.
Q5. Now we got some new result. Count shows us group with more then one rows.
Q6. Shows us exact group which we've found in Q5. -
URGETN HELP NEEDED! JAVA APPLET READING FILE
Hi everyone
I need to hand in this assignment today
Im trying to read from a file and read it onto the screen, my code keeps showing up an error
'missing method body, or declare abstract'
This is coming up for the
public statuc void main(String[] args);
and the
public void init();
Here is my code:
import java.io.*;
import java.awt.*;
import java.applet.*;
public class Empty_3 extends Applet {
TextArea ta = new TextArea();
public static void main(String[] args);
public void init();
setLayout(new BorderLayout());
add(ta, BorderLayout.CENTER);
try {
InputStream in =
getClass().getResourceAsStream("test1.txt");
InputStreamReader isr =
new InputStreamReader(in);
BufferedReader br =
new BufferedReader(isr);
StringWriter sw = new StringWriter();
PrintWriter pw = new PrintWriter(sw);
String line;
while ((line = br.readLine()) != null) {
pw.println(line);
ta.setText(sw.toString());
} catch (IOException io) {
ta.setText("Ooops");
Can anyone help me please?
Is this the best way of doing this? Once i read the file i want to perform a frequency analysis on the words so if there is a better method for this then please let me know!
Thankyou
MattWhether it is urgent or not, does not interest us. It might be urgent for you but for nobody else.
Writing all-capitals is considered shouting and rude.
// Use code tags for source. -
Help needed for an unusual iphoto error.
When I try to open my IPHOTO it now gives me this message... "The photo library was created with an unreleased version of IPHOTO please quite and upgrade this photo library by opening it in IPhoto 2 or Iphoto4", and forces me to quit right when the program opens.... for the record I've never had IPhoto 2 or 4 on my computer. I just added some more photos from my camera like I always do and this started to happen.
Also I tried upgrading to the newest version of IPhoto (I bought ILIFE 06 because I thought it would fix it, and then did the upgrade to no avail)... It makes no sense... and I need help to fix it.
(link to a screenshot of what happens) http://img206.imageshack.us/img206/3473/picture15hj.pngHi Kevin,
So far I have not seen any solution for that error message in these discussions. If you have a recent backup of your iPhoto Library folder then take the old library out of the Pictures folder and put your backup library in there (I suggest you backup the backup before you do this) Launch iPhoto and hopefully everything will be back to normal. If you don't have a backup then...
The only thing I can tell you to do right now is to create a new library and import/add to the library to reimport your images.
these are the steps:
Close iPhoto
Drag the iPhoto Library folder to the desktop
Launch iPhoto
In the next window that opens choose to create a new library.
-double click the iPhoto Library folder on the desktop to open it
-the two main folders you will need to import are the Original folder and the Modified folder (only if you want to import the edited images).
-the Originals folder has all your originals photos unedited. the Modified folder has all images that you have edited, rotated, cropped, etc.
-Drag these two folders to the desktop
-If you want to save the edited image, find it in the roll in the Modified folder and drag it into the roll of the same name in the Originals folder. It will replace the originals and now will be the original.
-If you don't care to save any edited images, then don't import the Modified folder into iPhoto or don't bother replacing the edited image with the original image like I just described.
-If you import the Originals folder into iPhoto you will have all your originals in their named rolls.
-If you import the Originals and Modified folders into iPhoto, you will have all of them being in the originals folder in the finder. The roll with the same name as the other will have a _1 appended to it's name (in the finder)
-the roll from the originals will be next to the same roll from the Modified folder within iPhoto. You can then delete any of the images from there if you want.
I know this might sound confusing but it really isn't.
Get back if any of this sounds like something you might want to do. -
Help needed! ADF Data Control: Navigation Buttons + Table issue.
Hey all!
We are working on a new application using ADF JSF+EJB 3.0 stack and are experiencing a problem with a simple feature we need to implement.
Scenario:
- Creating a data control for a facade session bean and drag a List returned by one of its methods as table;
- Dragging its corresponding navigation buttons (first, previous, next, last) from the data control onto the page.
Issue:
As we press those buttons, we see the page being submitted but but nothing changes in the table...It keep showing the same records all the time (buit-in range navigation works fine though). However, when we manage to drop the collection as a form (with nav buttons included), everything works fine.
We have inspected pagedefs for both cases and could not identify the difference.
Any help would be much appreciated as we need to address the issue asap..
Thanks in advance,
Gustavo
PS: Sorry for my English! ;)Hey, i have the solve to my problem.
In the definition page of the table page i change the propert Refresh (ifNeeded is his default value) to always of the iterator who im using to the table.But i use Toplink, then i had to change the property "Refresh Identity Map Results" to "enabled", that option is in the options of the named queries on queries in the toplinkmap of the current table who im using to my page.
i hope this will be util for you.
That's all
Dany -
"Help Needed" passing ResultSet data to JList having JCheckBox !!!
hi every body I am facing this problem since two days I tried but could't get correctly,I am new to java and I need to pass the result set data from the database to a JList having JCheckBox
I tried but could't get it
please do help me out, please
need some sample code for passing resultset data to JList having JCheckBox anybody please help me out
thanking you,
with regardshello
try this to pass the recordset to the jlist
String strlist[];// string array to store the resultsvalues
JList tempList;//list
protected void getList()
Connection conn = null;
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
// Get Connections
conn = DriverManager.getConnection ("jdbc:odbc:tablename", "", "");
resultSet = ----------
strlist= new String[delSecCnt];
int i = 0;
while (resultSet.next())
// Get the table name
tempList[i] = resultSet.getString(3);
i++;
resultSet.close();
conn.close();
catch (Exception e)
tempList = new JList();
for(int i=0;i < strList.length; i++)
tempList.add(strList,i);
//or if you want to use directly the values of recordset
tempList.add(recordSet[3]);
in this code i am using a string to store the results values and then passing it to the list. -
Help needed setting specific date in GregorianCalendar object?
Hi All!
I have set SimpleTimeZone object in GregorianCalendar object. How can I set a new date to the GregorianCalendar object, such that i can find DAY_OF_YEAR specific to this date's day?
URGENT replies will be appreciated!Thanks for ur reply!
but the problem is that i have to create a method:
public int getDayOfYear(int day, int month, int year)
return day_of_the year;
This method should accept user specified day, month and year and passes to GregorianCalendar/Calendar object. I need want to get DAY_OF_YEAR value from Calendar.DAY_OF_YEAR which it will provide, but the change is not affecting!
ACTUAL CODE
===========
public static double getDayofYear(int hr, int min, int sec)
String[] ids = TimeZone.getAvailableIDs(5 * 60 * 60 * 1000);
SimpleTimeZone pdt = new SimpleTimeZone(5 * 60 * 60 * 1000, ids[0]);
for (int i=0; i<ids.length; i++)
System.out.println (ids);
//setting DLS start and end rule
pdt.setStartRule(Calendar.MAY, 1, Calendar.SUNDAY, 00 * 60 * 60 * 1000);
pdt.setEndRule(Calendar.OCTOBER, -1, Calendar.SUNDAY, 00 * 60 * 60 * 1000);
Calendar calendar = new GregorianCalendar(pdt);
//Date trialTime = new Date();//SET DATE
//calendar.setTime(trialTime);
calendar.set(Calendar.HOUR,hr);
calendar.set(Calendar.MINUTE,min);
calendar.set(Calendar.SECOND,sec);
return ((double) calendar.get(Calendar.DAY_OF_YEAR));
This method is giving true output for today [2nd Dec. 2002 -> 336], but only when it accepts current time, not date. Also giving same output on changing arguments!
Hoping ur help!
Maybe you are looking for
-
Over the last month and a half I have called and spoke to 3 or 4 different Verizon customer service agents about a problem with my account & every time I am told that the problem will be fixed only to have nothing happen. What is going on here? Aroun
-
"The disk could not be read from or written to"? Help!
I was recently trying to update my ipod (5th gen. video) and sync it with my new music I downloaded, however the new songs would not sync and this error message came up: Attempting to compy to the disk "ipod" failed. The disk could not be read from o
-
GR Price different from PO price
Hi Experts, We are continuously having a scenario wherein the per unit price at time of GR is showing more than then PO per unit price. The new price is relevant and fair too. As an example: In PO per unit price is Rs 150/-, quantity 100 units. So to
-
What variable type to use??
i need to perform calculations on various numbers ranging from 0 to as big as possible.i also need to perform divide operations on these numbers and i need the result to be very accurate including decimal points. example: (24 * 1000000) \ 35250 what
-
I did my first "intelligent" form last Thursday. Using test presentment it worked perfectly. Yesterday I did a couple changes (renamed some fields and removed a couple that won't be in my DAT file) and it is no longer working correctly. This is a fai