PAP2T connection to phone system?

Has anyone connected a PAP2T adapter to a multi-line phone system. Using Viatalk, can't seem to get enough power to have both lines functional when hooked to analog Telrad 8/16 KeyBx. Both lines work fine when connected to single line telephones. HELP!!!! Reid McAuley, Rocky Mount Habitat for Humanity

Solved problem!!! PAP2T must be within 6 feet of telephone system. Moving it closer and using short telephone base cord solved the problem. Both lines now working on the system.

Similar Messages

Cannot connect to the phone system. An unidentified error has occurred, Please try again.

Issue: Lync 2013 users with remote call control enabled cannot connect to the phone system. When the user logs into Lync, they see an exclamation in the bottom right corner
with this error.
Error: Cannot connect to the phone system. An unidentified error has occurred, Please try again. If the problem continues, please contact your support team.
Environment:
1 site: Site1
2 Pools:
1. Lync 2010
Trusted application is added here for the site.
2. Lync 2013
Avaya phone system: AES r6-1-2-32-0
I have not moved the trusted application to the Lync 2013 pool yet, but my understanding is that it should still work since it’s in the site. Is my understanding on this correct? (All of my other trusted applications do work for Lync 2013
users & none of them have been moved yet. Remote Call Control is the only one that does not work.)
This is from the uccapi log. This is just from the user logging in, not actually making a call. Below are the items that I think are important, however, I don’t know how to interpret it to determine if the problem is on the Lync side or
the Avaya side. Here’s a summary:
SIP/2.0 100 Trying
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="E05700E2", snum="9", rspauth="f308eae87c0bbe64a1ab213574776cbdf9823ab6", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]>
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 INVITE
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0
SIP/2.0 200 OK
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="15C0F9A2", snum="13", rspauth="4fd891e39a33e902fb1cec5d980e5bf0ccb172a0", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]
>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]
>;tag=A7A45C856ECD79121A1827265ABBD7F6
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 CANCEL
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0
SIP/2.0 487 Request terminated
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="F46EC133", snum="14", rspauth="1d92718caa4f61d967faa46a5c256aafa8b4e740", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]
>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]
>;tag=A7A45C856ECD79121A1827265ABBD7F6
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 INVITE
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
ms-diagnostics: 5002;reason="Request was cancelled";AppUri="http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent";source="lync03.
domain.com"
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0

Hi Suelizy,
To better understand the issue, I would like to collect the following information for troubleshooting:
1. Do you mean the Lync 2010 user can connect to the Phone System?
2. What’s next hop pool of the application?
In a mixed environment, you must set the next hop pool to be the Lync Server 2013 pool.
Best regards,
Eric

Connecting Shuffle to phone system and dock

A friend of mine who works for a local non profit outfit wants to use an mp3 player to provide music for her voice mail system. She's considering a shuffle, but she wants the music playing 24/7, literally all the time. You can't simultaneously connect a shuffle to headphones (or other similar speaker) and the charger. Is there a dock that will let her keep the shuffle docked/charging while simultaneously playing music into her phone system?

Sorry, but the answer is NO.

Error: No Phone System Connection

Greetings,
I am integrating RCC with Lync 2013 and I am getting this
Notification: No Phone System Connection. I have notices that when I capture packets transferred between Front End Server and CUPS server, there are no packets being sent to CUPS server.
I have completed below steps:
1) I have enabled integration with my phone integration option in Lync client
2) Added Static route to the CUPS server on port 5060.
3) Added CUPS as a trusted application in the application pool.
4) Published the new topology and restarted the Front End Services.
Remote Call Control URI is set to: sip:[email protected]
Phone URI is set to XXXX;phone-context=dialstring
I would really appreciate if you can guide me.
Thank you
Chirag
Chirag Shah

Hi,
Did the Lync account contains an apostrophe? If so, it may influence for the users with an apostrophe (') in their Lync sign-in ID. In order to resolve the issue, remove the apostrophe from the Lync sign-in ID. Also you can change to use another Lync account
to have a test.
You can refer to the part of “Unable to get Softphone control” in the link below:
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-presence/97443-cups-cupc-ts.html#controlerror
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Connect to an existing phone system

Our church currently has two regular phone lines connected to an in-house system. I would like to replace the second line with a Skype line. Can I connect to my existing phone system? Both lines currently just plug into the system. How do I convert Skype to a wired line? Are there monthly costs? Per minute usage costs? I am very new to all of this and would love some guidance. I don't really even know where to begin. Thanks

Hi Jamie,
In order to help you I need some more information:
Can you tell me what your remote system is?
What is consists of? eg PXI 1000 chassis with specific modules?
What are you trying to communicate with it from? - a local PC?
Is the system hardware NI or third party?
What operating system are you using? eg Windows XP?
Have you installed the drivers for the hardware? Did you remember to install the drivers after you had installed the hardware and reboot?
Did you get the found new hardware wizard popup when you installed the hardware?
What are the methods you have already tried for connecting to it?
In what way are you communicating between your local and remote system?
ie via Serial port? TCP communication?
Regards
Emma Rogulska
NIUK & Ireland

Connecting mobile phone to 4.1 system

how can i connect my motorola v3i to my creative 4.1 inspire speaker system?

Marc Caubet wrote:
We would like to connect a cellullar phone to a virtual machine. Connecting this phone to the hypervisor is detected as /dev/ttyACM0/dev/ttyACM0 is a serial device, not a block device. You cannot attach it with block-attach. However, you've attached it via USB as well, so you may be able to use USB techniques to get it into the guest:
http://wiki.xen.org/xenwiki/XenUSBPassthrough.html

Automatic connection between call center and phone system

Dear friends,
I have one customer, they have a phone system in their call center.
When implemeting CRM 2007, they want to have an automatic connection betwwen their phone system and call center in CRM. This means when having a call from customers the call center system ( CRM 2007) searches automatically or updates the phone number ( this phone number is get automatically from phone system ).
Does this is possible in CRM 2007? Or if u have any solutions pls let me know.
Thanks and Regards,
Nghi Do

Hi,
Just check if this blog is of any use to you:
What is Computer Telephony Integration (and Why Do I Need It?)
Thanks and Regards,
Rohit

How to prioritise connection of CAR Bluetooth PHONE system/ device over SmartBand Talk SWR30

After pondering about this device for over a month I asked my wife to gift it me for Christmas. For 3 days I really liked it, but then a critical flaw became apparent Having not driven for a few days due to the holidays I set off in my car, only to realise that I was not receiving telephone calls, SMS and other notifications on my built-in car bluetooth system (Ford Sync by Sony/ Microsoft), only on the Smartband Talk. Doing some research it became clear that if my SWR30 was already connected with my Xperia (Z2) my Ford Sync could not connect! I realise the limitations of Bluetooth (i.e. you cannot have simultaneous connections using a same Bluetooth profile) and the workaround is to manually turn off the Phone Audio (handsfree) Bluetooth profile for SWR30 in the Z2. Remembering to turn off/ back on is proving to be irritating and too much effort. I thought I might be able to create an Event (macro) in Sony's Smart Connect app to do this automatically, but this cannot be done as the app is rather limiting! It is more important for my car system to work with my Z2 as I use it frequently and is altogether a safer and more legal way of answering calls etc. Has any one got ideas or suggestions? I really like this SmartBand (its far sleeker & lighter than true smartwatches) and I actually want the talk feature, but if I cannot resolve the car bluetooth problem (and this will probably affect all other Bluetooth car systems/ devices) easily and smoothly, regretfully, the SWR30 will be going back to the seller

As stated before, I really like the SmartBand Talk and was very disappointed to learn that it could not coexist with a car Bluetooth system! Having had a few days off between Christmas and New Year I was determined to resolve this "flaw" and am glad to report that I have and in a slick way! Prompted by "ensaro's" widget suggestion, unfortunately I did not want a toggle which had to be manually executed, it had to be automatic. So I thoroughly researched the Google Play Store, trying out many, and ended up with 2 apps which were real contenders: Trigger (by Egomotion) and Automagic (by Gridvision). Both apps basically allow you to create a trigger (eg Bluetooth Car Audio wants to connect to phone) followed by an action (eg switch off Bluetooth phone connection to SmartBand, followed by switch on connection to Bluetooth Car Audio). Trigger calls this automation task a Trigger, Automagic calls it a Flow.Trigger is fairly intuitive visually, but unfortunately support for this supposedly highly rated app seems no longer to exist! This became very frustrating for me as at times it would not run (however, it also allows a widget to be created to manually run the task manually)... therefore I dug in to the more heavyweight Automagic! Automagic uses a dynamic flowchart, where you add a trigger, an optional condition (true/ false) and finally action(s). The style reminded me of my programing days many years ago and the logical nature excited me. The possibilities are huge and may scare off some users looking for a quick result, but in fact it is really quite easy to use, especially once you undertstand some of the slightly "obscure" terminology used (after all this a German programer at work and some translation suggestions may be required). At the end of the day I created 2 flows, one to connect to the car system (via disconnection of SmartBand and then connection to my car) and one to reconnect to the SmartBand when not in car (the trigger being that the car Bluetooth is no longer connected/ disconnected). These flows are passive and apparently use very little battery power, executing when a trigger condition is matched and so far is working well. If anyone wants to see how my flows are constructed, I will be happy to email them. You open them up directly in Automagic (going to their site allows you to download a 9 day trial with up to 3 flows working)... my flows are embellished with extra actions, such as switching off WiFi and playing a sound when a connection has taken place... and most important of all there is a forum with lots of help and examples and I was really happy when the progaming author, Martin, actually replied to a query... Problem... sorted! Automagic is well worth £2.40 ...

Can't download any apps off my phone, Tablet dos not connect to phone

Someone please help me, cause I am honestly about to loose my mind. I have a Torch and I've only had it for a year now and all my services arent working, I'm considering switching to an IPhone if I can't figure this all out today.
So first problem I'm trying to buy one single app off app world billing threw Roger's Canada and it keeps saying there was some error, I looked it up on the website and apperently you just have to switch to debit or paypal, I don't like using online payment methods like that why can't I just get it on my bill? Either way they get the money, I don't see how its so difficult to just bill threw my service provider. I also have no time to call them and tell them all I want to order, I just want ONE $1.99 app, I'm not going to sit on the phone for 20 minutes+ for one app, then have to do it again when I want another app. I have been trying to buy the same one app for about 2 months now, seriously I just want to buy the app and get it over with how is that so hard? I want to bill threw my Service Provider it takes two seconds to put it on my bill.
Next problem, the blackberry bridge on my phone/tablet has just stopped working and disappeared. I paid $500 for this tablet that I was advised not to buy because Blackberry was "going down the whole" so much for having faith in the company, this thing is a peice of junk. And apperently so is my phone, again how is it all the sudden my bridge disappeared? I can't connect my phone to it now? So why didn't I just get a cheaper tablet that could do the exact same things??? I don't know if these are new problems in the system or something but I have been trying to hook up my phone to this tablet for a while it used to work then I upgraded the software and now its gone and I've tried everything its just not coming back. Like I don't understand, why would you not put the Blackberry Bridge in the updated version? And why is it deleted off my phone? Then when I try to re-install it, it says its still there.
Very disappionted in Blackberry right now, nothing on my phone is working and it seems I'm not the only one.

Hi and Welcome to the Community!
samm1234 wrote:
Someone please help me, cause I am honestly about to loose my mind. I have a Torch and I've only had it for a year now and all my services arent working
Well, I can't tell...has it been working fine for a year, and this suddenly started? If so, what happened just before this behavior started? Undo that to see if it helps. If it's not been working at all for a year, well...I'm not sure how to reply to that...you must have great patience indeed, though.
samm1234 wrote:
So first problem I'm trying to buy one single app off app world billing threw Roger's Canada and it keeps saying there was some error, I looked it up on the website and apperently you just have to switch to debit or paypal,
Oh how I do wish you'd have given us the actual error message...otherwise, you leave us guessing...but, in short, each carrier decides if they will allow carrier billing or not. It's their choice to do so, or not. I've no idea if Rogers allows it or not.
Also, if you are part of a BES environment, it's possible your BES admins have restricted carrier billing...they, too, have the right to do whatever they must to enforce company policies. But, again, without details, this remains just another guess.
samm1234 wrote:
Next problem, the blackberry bridge on my phone/tablet has just stopped working and disappeared. I paid $500 for this tablet that I was advised not to buy because Blackberry was "going down the whole" so much for having faith in the company, this thing is a peice of junk. And apperently so is my phone
I completely disagree with your opinions there...but no matter, they are indeed opinions. There are plenty of people who are getting quite a bit of good use out of both types of devices.
samm1234 wrote:
again how is it all the sudden my bridge disappeared? I can't connect my phone to it now?
Well, once again, the lack of details makes it pretty difficult to diagnose. "I can't connect" is pretty useless as far as symptom descriptions go. For instance, what exact steps do you attempt? What exactly happens with each step? Any error messages? If so, once again, the complete and accurate error message is critical to helping you.
samm1234 wrote:
So why didn't I just get a cheaper tablet that could do the exact same things???
It's a free market place, you are free to do whatever you desire. But, ranting here isn't perhaps the best way to seek help from kind volunteers... Plus, you've spent quite a bit of effort on your rants, but have left out the details that perhaps might have more quickly guided us to useful help for you...
samm1234 wrote:
I don't know if these are new problems in the system or something but I have been trying to hook up my phone to this tablet for a while it used to work then I upgraded the software and now its gone and I've tried everything its just not coming back.
Again, "tried everything" isn't terribly useful to us...we aren't clairvoyant... Have you tried completely removing the pairing of the two devices and re-configuring them from scratch? Also, what software did you upgrade? Your BB OS? Your PB? From what version(s) to what version(s)? Did you re-install the Bridge from scratch?
samm1234 wrote:
Like I don't understand,
And, from your lack of details and clarity, neither do we...
samm1234 wrote:
why would you not put the Blackberry Bridge in the updated version?
Updated version of what? BB Bridge is an add-on app, not used by everyone. As such, including it inside the core apps would be a waste of AppMemory for those who do not need it.
samm1234 wrote:
And why is it deleted off my phone?
Well, you did some kind of upgrade or update, but since we don't know yet exactly what that was, we can only guess. And my guess is that you somehow updated your BB OS, and as such, you need to re-install all of your add-on apps. It is ALWAYS better to reinstall add-on apps when you upgrade the OS...some may not be compatible with the new OS you have installed. Some may have a different version for the OS you installed. Plus, reinstalling add-ons is always better so as to be sure that they are properly installed after such a major update of the BB OS.
samm1234 wrote:
Then when I try to re-install it, it says its still there.
That's interesting...but, again, the exact message it presents is always more helpful. Check here, though:
KB10040 How to view or remove installed applications on a BlackBerry smartphone
Anyway, lots of clarification is needed from you if we're to do anything but WAG.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

TS1363 I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid respo

I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid response from the device. How can I get the system to recognize the phone, and let me rename it as my iPod, instead of my phone?
As an aside, the current installed operating system on this old iPhone is 4.2.1, but that wasn't one of the selectable options in the operating system list dropdown below. Don't know if that makes any difference.

Hi maddogdne,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Using an iPhone without a wireless service plan
http://support.apple.com/kb/ht3406
Cheers,
- Judy

Routing issue with ASA and UC540 phone system - at ASA???

Having an issue with routing from the PC at .242 to the CUE server at 10.1.10.1. The CUE server is built into the UC540 phone system. It is an internal piece of software that is used for voicemail and management. The UC540 is not only a call router, it is also an IOS router. It has it's own WAN connection as does the ASA.
Here are some facts:
1. Can ping the UC540's internal CUE server from the PC ( ping to 10.1.10.1 )
2. Can ping the UC540's VLAN 1 address from the PC ( ping to 10.1.10.1 )
3. The ASA is the default gateway for the PC.
4. I have a route inserted at the asa that is:
               route 10.1.10.1 255.255.255.0 10.19.250.254 1
5. I have a nat statement that prevents NAT from occuring but I don't think this is necessary as the 10.1.10.0/24 network isn't otherwise defined on the      ASA.
6. I cannot pull up a web page when I point the browser on the PC to the 10.1.10.1 address
7. I CAN pull up a web page on the PC when I create a static route on the PC iteslf :
               route add 10.1.10.1 mask 255.255.255.0 10.19.250.254
     Is is only with this route that I am able to get to the web GUI on the phone system.
8. The phone system has a loopback interface at 10.1.10.2 that serves as the gateway for the internal CUE server, the internal CUE server is at      10.1.10.1
9. The switch is a 2960 and has a trunk port to the phone system to allow for the voice vlan which is at 10.1.1.0/24, no issues with this vlan and phones      are connecting to the system fine.
Since I can get the GUI to come up when I set a static route on the PC, then I would assume that the routing in the phone system with it's internal server is fine as it wouldn't work otherwise. Since I can successfully ping the CUE server from the PC, that would lead me to believe that the ASA's routing is setup correctly..... TCP traffic doesn't seem to get to/from the CUE server.
Here are the routing tables:
ASA:
Gateway of last resort is xxx.xxx.xxx.xxx to network 0.0.0.0
C    xxx.xxx.xxx.xxx 255.255.255.252 is directly connected, outside
S    172.16.100.100 255.255.255.255 [1/0] via 38.97.193.65, outside
S    10.1.10.0 255.255.255.252 [1/0] via 10.19.250.254, inside
C    10.19.250.0 255.255.254.0 is directly connected, inside
S*   0.0.0.0 0.0.0.0 [1/0] via xx.xx.xx.xx, outside
The UC540 phone system's router side:
Gateway of last resort is xx.xx.xx.xx to network 0.0.0.0
S*    0.0.0.0/0 [1/0] via xx.xx.xx.xx
      10.0.0.0/8 is variably subnetted, 7 subnets, 4 masks
C        10.1.1.0/24 is directly connected, BVI100
L        10.1.1.1/32 is directly connected, BVI100
C        10.1.10.0/30 is directly connected, Loopback0
S        10.1.10.1/32 is directly connected, Integrated-Service-Engine0/0
L        10.1.10.2/32 is directly connected, Loopback0
C        10.19.250.0/23 is directly connected, BVI1
L        10.19.250.254/32 is directly connected, BVI1
      XX.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C       XX.XX.XX.XX/29 is directly connected, FastEthernet0/0
L        XX.XX.XX.XX/32 is directly connected, FastEthernet0/0
      172.16.0.0/24 is subnetted, 1 subnets
S        172.16.100.0 [1/0] via 10.19.250.1
The UC540's internal CUE server:
Main Routing Table:
           DEST            GATE            MASK                     IFACE
      10.1.10.0            0.0.0.0           255.255.255.252       eth0
        0.0.0.0             10.1.10.2         0.0.0.0                    eth0
Any help appreciated!!!
Thanks!

Hello,
Where you able to solve this problem? It does sound like an issue with TCP state checking on the ASA. The Firewall needs to see both sides of the traffic but the return traffic is going from your UC540 direct to the PC. The firewall essentially kills the traffic.
I would recommend disabling TCP state checking on the ASA and see if it works. Otherwise, you will need to stub route the UC540 as a separate VLAN off the ASA which needs to route through the ASA to reach the PC.
Here is a info page on the TCP State Bypass:
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/111986-asa-tcp-bypass-00.html
Please let me know how it works out.

When I connect my phone to my comp it tells me that there's an update to iOS 4.3.3, when I try to actually do the update it goes so far and says that it cannot back up my phone because it's disconnected, when nothing's been touched to dc it.

I've been trying to update my phone to iOS 4.3.3 like it tells me to when I connect my phone to my computer, and it goes so far, then I get an error box (no error number) with a message telling me that my phone can't be backed up because it's disconnected. Now I know I've touched nothing to disconnect it, everything else is working fine, I just CANNOT get my phone to back up. I called Apple and my phone support expired 10 days ago (go figure!!) Anyone else run into this and find a way to get it to work? He got me to delete the backup that was on my system to see if that helped...nothing.

Hi,
What is your current computer and OS? It looks as though your iphone is not compatible with your computer.
Jim

ITunes hangs when I connect my phone

iTunes 10.2.1.1, iPhone 3GS iOS 4.3, Windows 7 SP1 64-bit.
Short summary: when I connect my phone to sync, iTunes hangs. If I let it sit for a minute or two it will eventually crash. If I disconnect my phone before this then iTunes starts responding just fine.
Details:
I just "flattened" my computer: formatted the drive, reinstalled the OS (and upgraded to Win 7 SP1 off of a DVD with the combined install). The computer waas fine before this, I just wanted to do some spring cleaning. My iTunes library is sitting on a server and has always been accessed over the network.
After the re-install of the OS I installed iTunes and pointed it at my library. That was fine. Then I connected the phone. At that point it was running iOS 4.2.something. I decided to upgrade to iOS 4.3. That seemed to work fine. After that when I connect the phone iTunes hangs.
I decided to reset the phone with the option to erase all content and settings. iTunes now worked ok. So I did an initial sync, telling it to set it up as a new phone. I did not sync any music at this point--I have ~22GB of music, it takes a long time to sync. This still worked fine. So then I sync'd the phone again, this time installing all the music. Again iTunes hangs.
I wondered if the library was screwed up. So I installed iTunes on a laptop (running Win 2008 Server R2), pointed it at my same library (still over the network). Then started over: reset the phone, clearing all settings & content. Sync from the laptop. It works fine. Sync the music from the laptop, it still works fine. It also seems clear that it's not a problem with the iTunes library.
Back to my original computer, the one with problems, my wife is using it logged in with her account and syncing her iPad without any problems. However, she has very little music on her iPad, maybe one ripped CD, whereas my iPhone has hundreds.
So the issue seems specific to this one computer & phone that has a lot of music on it. I never had a problem on the computer before, but that was iTunes before 10.2, iOS 4.2 (and earlier), Win 7 without SP1, ... So I've changed lots of things at the same time and am not sure which one really created the problem. Although I wonder if it's a problem with Service Pack 1. I don't have any concerns about a bad install of the SP, since I did a full install of the OS that already had SP1 integrated into it. But maybe iTunes 10.2.1.1 has an issue with SP1.
Any suggestions?

I've been following a Windows forum about the freezing problem. It happened to us and our three iOS devices immediately after upgrading Windows 7 64-bit to SP1. There were plenty of others with the same problem. Rolling back SP1 solved it instantly. Reinstalling SP1 caused it instantly. No amount of cleanly uninstalling and reinstalling Quicktime, iTunes, or any components helped.
Although I have an image of my system before SP1 that I could revert to, I didn't want to. Luckily *a temporary fix is to run iTunes in Vista compatibility mode*. The iOS device will now be recognized most, if not all, of the time. ITunes will run like molasses, but that's better than being unable to sync any of your devices ever again. (I could describe compatibility mode, but you seem PC-savvy.)
Here is the specific trouble I am addressing, although it is only part of your trouble. We plug in one of our iPhones or our Touch, iTunes hangs for a couple of minutes. Windows sees the device as a camera if applicable, but the device never appears in iTunes. It's worth repeating that Windows doesn't have trouble recognizing the device. The problem is with iTunes.
And yes, everyone tried all sorts of things with the Apple Mobile Device utility. People even tried "nuking" all their USB drivers and letting them get rebuilt on startup. The only temporary fix found so far is Vista mode, and the only permanent fix is downgrading the OS to before SP1.

Playlist empty when connected to car system

Since upgrading to iOS6.0, though the songs in my iTunes playlist show up on my iPhone 4S, whenever I connect the phone to my Hyundai system, the playlist becomes empty. The only songs I can play are the ones that are not in the cloud. Didn't have this problem pre-iOS6.

Hi vance23! Other than this trouble with the bluetooth, I hope you're enjoying your new phone. Our customers' safety is very important to us, so I'm glad you're trying to use your hands free options. Many times, third party bluetooth devices may have compatibility issues with certain types of bluetooth devices that haven't been tested. Since your HTC is successfully finding and pairing to the stereo, that leads me to believe it may not have been tested to work with the 4G LTE Incredible. Have you checked with the manufacturer of your aftermarket stereo to see if it's compatible with the 4.0 bluetooth wireless technology in your new phone? Is the phone able to place and receive calls when not connected to your car bluetooth? Have you tried any other bluetooth accessories?
We have lots of great bluetooth accessories that are compatible with the new 4.0 technology at http://bit.ly/Xd7EZi if you'd like to take a look at a few other options too.
Thank you
JenniferH_VZW
Please follow us on Twitter @vzwsupport

Iphone 4s bluetooth does not connect to sound system

just bought Iphone 4s 2 days age. Bluetooth can not connect to sound system in my chevrolet captiva model change 2011 (Thailand) but my Iphone 3gs with iSO 4.2 is still worked well.

I have the same priblem. Got the 2013 Captiva (Thailand) LTZ and the dealer claims APPLE devices are not compatible. This is a Chevy issue - howcome Chevy cannot make their executive target market SUV be compatible with the leading phone used by executives??? This is such a turnoff.

PAP2T connection to phone system?

Similar Messages

Maybe you are looking for