PAP2T - some devices cannot go off-hook to dial

Not sure if this is the right place for Linksys VOIP hardware - though Cisco moved everything onto their site...
I have a PAP2T that seems to have trouble letting some analog devices dial out. Specifically, I tried it with a credit-card machine, and it seemed like the PAP2T would never go off-hook so it could dial. I saw no SIP traffic for any dialing. However, I immediately plugged the same FXS port into a fax machine, and that fax machine was able to dial out fine.

Before you set up port forwarding on your router, change two of the Phone Adapter's settings using its Interactive Voice Response Menu. First, disable its DHCP feature, then assign a static IP address to the Phone Adapter.

Similar Messages

  • Some devices cannot get internet

    Hi there,
    Hope someone can help me.  We have a BT Hub 3.0 at our school, but for some reason some machines can connect to the network and see folders, but not get any connection to the internet.
    I am thinking is there a pool is leased addressese the hub sends out either run out?
    Maybe there is a block put on some devices due to firewall policies?
    Or could it be something else.
    I have checked out the BT Hub Manager - Event Log, but to be honest I am not sure what I am looking for.  Its a shame, because some students just cannot get access to the internet, regardless if I reboot the Hub or not.
    Thanks

    I had another look at the settings and experiement a few.
    It seems on some machines I can ping google via the IP address and the DNS name
    On the machines that cannot connect to the internet, I cannot ping with their dns name e.g. www.google.com.  Jowever I can ping the IP address e.g. 31.55.162.152
    What setting on the BT Home Hub 3.0 can I change in order to resolve issues with DNS?
    Thanks

  • Some Devices cannot connect to internet

    Hey all, just started having this problem about 2-3 weeks ago. Some devices including My pc, 2 laptops, and 2 roku devices are able to connect to the internet just fine (all via wireless). Internet is noticeably slower however, and my pc which also has a wired line is unable to connect via the hardwire connection. The devices unable to connect are my Nexus 7 tablet, Roku HD, and a Vizio Smart TV. (Tablet and Roku via wireless, smart tv via hardwire.) 
    My router is a WRT54GS2 V1. Like I said, I never had any issues with any of these devices prior to 2-3 weeks ago. None of the devices are new and have all been connected in my home for some time. 
    When trying to connect my tablet it will say Authenticating, Obtaining IP Address, and then after a while of trying to connect it says Avoided Poor Internet connection.
    The Roku HD stops at the second bubble where it says Connecting to Local Network (or something like that).
    The Vizio Smart TV just won't do anything. When I attempt to test connection it just says unable to connect.
    The real kicker is that I have been able to get the internet working on all devices 2-3 different times which lasts a few days maybe. Really all I did was keep trying to unplug the router and modem until it worked (mostly to no success).
    So any help/support at all would be greatly appreciated!!

    This could be two separate cases. The wireless devices are no longer able to connect possibly due to interfering signal in the area the you need to avoid. Try changing the wireless channel to 6, 9, 11, and 1. The second case could be a cable problem or a setting with the Smart TV. Use a different cable to plug the Smart TV to your router. Check other wired devices if they're working with the router too.
    Here's an article that may help:
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=476326f36c294e579ba6691a8db5411e_3698.xml&pid=80&r...

  • WRT54G - some devices CANNOT connect - incorrect password

    Desktop mac & macbook pro connect fine, iphone 4S connects fine and one kindle fire, but my dell inspiron notebook, xbox 360 and other kindle fire can never connect.  they recognize the network, and prompt me for the password but when i enter it it is always "incorrect."  i changed the password once and it hasn't made a different.  have not reset router, since the other devices connect just fine. it's driving me absolutely bonkers!

    The wireless password is case sensitive. You’ll just have to make sure that you are typing it in correctly. You can try to add the network instead if connecting to it manually does not work. Reset is what I see as the last option for you to make sure that the router will work properly for other devices. You have to take note though that the router model you have is an older version and a firmware update is needed. You can still download the firmware online and select the correct hardware version which you can verify on the sticker at the bottom side of the router. Go to this link: http://support.linksys.com/en-us/support/routers/WRT54G.  

  • Some devices cannot get on the internet

    I'm at end's wits with my network at home.  We have a Clear modem with only one antenna to their tower (no internal WiFi), cabled to our Airport Extreme (more than 10 feet away).  The Clear modem is annoying and won't let me disable DHCP, so I created a private network with a range of IPs 192.168.1.100 to 200.
    Only four devices will get on the internet, the other 2 won't.  I can ping from them the router and even an external website but not no browser will work on them.
    Any ideas?  It's beyond frustrating.  Is the Airport limited to 4 devices only? That would seem absurd.
    Thanks Nicolas

    Read your router manual.
    How to set WEP/WPA.

  • Every device (iphone4, iphone4s, ipad2) I try to hook up to iTunes gives me a message "this device cannot connect because the apple mobile device service is not setup" does anyone have ideas as to why it keeps popping up? It just started doing this.

    Every device (iphone4, iphone4s, ipad2) I try to hook up to iTunes gives me a message "this device cannot connect because the apple mobile device service is not setup" does anyone have ideas as to why it keeps popping up? It just started doing this.

    I'd start with the following document with that one:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • HT1212 iPhone5, the screen is damaged, never synced to iTunes, locked screen, cannot turn off the device...

    iPhone5, the screen is damaged, never synced to iTunes, locked screen, cannot turn off the device...

    No. I would never take an iPhone to anyone other than Apple unless there was no alternative. You can get the display replaced on an iPhone 5 at most Apple stores for $149. If there's more damage, it will cost $229 for a full replacement. Both prices assuming you don't have AppleCare+.
    As I said, taking it elsewhere forfeits your ability to ever get it serviced by Apple. Apple does not sell iPhone parts. There are no legitimate sources for iPhone parts. All the parts you will find are either salvaged from damaged phones or counterfeit.
    If the phone is at all functional, you may be able to plug it into a computer and extract the photos and videos from the camera roll.

  • I just got an IPad and it seems to be interfering with my Iphone.   Facetime doesnt work unless the other device is shut off.   apps aren't syned.  email doesn't some in quickly on the phone

    i just got an IPad and it seems to be interfering with my Iphone.   Facetime doesnt work unless the other device is shut off.   apps aren't syned.  email doesn't some in quickly on the phone

    The machine could be repaired by a company that does circuit board re-soldering, since it is possible a heat-flex solder break on the main board may have caused either the processor or graphics chips to lose connection and that could manifest itself in a few somewhat documented ways.
    There is an on-board RAM chip that may also have something to do with a kernel panic, if it no longer is functioning correctly; that is the non-removable one soldered on the board you never usually worry about.
    Companies such as powerbookmedic, wegenermedia, and others can take in portable macs of vintage or newer (contact them for details on what they do, and how they accept work orders) for repair and can fix most anything; and have a parts inventory. Modern repair workstations allow the equipped service company to fix complex issues and they do troubleshooting. Sometimes the cost is less than a replacement logic board.
    The links above may help isolate the general cause of a kernel panic. There are other articles in Support database including a deeper look into them.
    •Technical Note TN2063: Understanding & Debugging Kernel Panics
    https://developer.apple.com/library/mac/technotes/tn2063/_index.html
    •Resolving Kernel Panics - The X Lab:
    http://www.thexlab.com/faqs/kernelpanics.html
    •Troubleshooting Kernel Panics:
    http://www.thexlab.com/faqs/kernelpanics.html#Anchor-Troubleshooting-49575
    Usually the issue is caused by hardware, especially if there is an indication of machine failure in the crash log or other screen image text.
    A working last model MacBook (mid-2010) would be a better 'first mac' to have.
    Hopefully you can sort it out.
    If not, there likely are fair parts in it.
    Good luck & happy computing!

  • Adobe Reader 2 for mobile device cannot read some pdf's

    I have an IPAQ 211 handheld and am using Adobe Reader version2. It reads most pdf's, but some produce an error message and shows only blank pages. Here is the message: "Unknown filter. Some content cannot be displayed". Any ideas? I can read these in Adobe Reader 7.0 on my desktop, but not on my handheld.
    Thanks for any suggestions,
    PJ

    Have you tried the same on a different browser ? Are you able to open and read pdf documents saved on your computer locally ?

  • Satellite Pro A10: New Atheros/Askey WLan card but 'This device cannot start' code 10

    Hi there,
    I have a Satellite Pro A10 and have purchased an internal mini pci wireless adapter. The following information is displayed on my card:
    Askey WLL3070-D4(MOW)
    Atheros AR5BRB-43
    I installed the card, hooked up the ariel's and turned the laptop on...the switch at the front now lights up and windows xp finds the new ethernet adaptor. My problem is this...
    No matter what driver i install (and ive tried every Askey/Atheros etc driver from the first 20+ pages of yahoo/google) the card installs fine but then in device manager has a yellow ! next to it and says This device cannot start (code 10)
    I'm really stumped. I have some more ram coming in a few days at which point i shall be installng Vista which im hoping sorts my problems out but does anyone have any ideas?
    I've yet to find a driver which specifically refers to the AR5BRB or the model number WLL3070-D4.
    Does anyone have a location for a driver etc?
    thank you

    Hi
    I use always this page for WLan driver update:
    http://aps.toshiba-tro.de/wlan/
    This is a Toshiba WLan driver portal and there you can find all necessary WLan drivers
    Ciao

  • R61: Intel 82566MC Gigabit Network Device Cannot Start (Code 10)

    Hi
    I purchased a Western Digital 7200 rpm 320 GB hard drive (the WD3200BJKT) a few days ago to be installed in my ThinkPad R61 (model 773215A). After making a fresh install of Windows XP SP3 and all the drivers, everything seemed to work fine except for my ethernet device, which is an Intel 82566MC Gigabit Network Connection. I obtained the following error code: "This device cannot start. (Code 10)". The ethernet device only functioned once, which was right after I installed its driver after the fresh install of Windows XP. However as soon as I rebooted, I received the above mentioned error code. By the way, the device was working fine before I changed my hard drive.
    I have tried everything described in troubleshooting guides available online, including disabling and enabling the ethernet device, uninstalling and reinstalling the ethernet device and updating the drivers, but to no avail. The only way I could make it function again is by switching off my notebook, unplugging and replugging the power adapter and finally switching the notebook on again. If I were to do a restart, or switch my notebook off and on without unplugging the power adapter, the ethernet device would not function.
    I have a feeling that it might be the bios. I am currently using the latest bios (version 2.26), and I noticed that this bios was 'supposed' to fix "The "New Hardware Found" message for Intel Gigabit Ethernet may appear." Looks like some problems with the Intel Gigabit Ethernet still exist. However I have tried flashing several older versions of the bios, but the problem still persists. Appreciate any help/suggestions I could get. Thanks.
    type added.
    Message Edited by Agotthelf on 04-04-2009 06:27 PM

    Hello
    I bought my R61 beginning of 2008, and since then I had this problem - only with the LAN device, NOT with WLAN - 3 times. It did never have something to do with reinstalling Windows or installing a new device like a HD, it just happend, usually after configuering new network properties (with the tool Access Connections). 
    The first time when I experienced this, I tried to reinstall the NIC driver, but that didn't help.
    Every time, after 2 or 3 days, the problem simply disapeard.
    I have on the same laptop, on a second HD partition, a Debian Linux installed. This time, my NIC started its "time-out" after configuering new network properties on Linux, and it does not work anymore on neither Linux nor Windows (2 days so far).
    It's really annoying, and because it seems the OS has no influence, I think it is Lenovo's job to fix this problem.
    I belive it's - like mhafiz says - a BIOS problem, or some hardware issue, so please: Lenovo, it's your turn!
    I always bought Thinkpad Laptops until now, and I think they are in quality high above any other brand, and I really hope this will continue.
    Chris 
    PS: I hope your (and also mine, like it did before) NICs will just resume operating after a while...

  • Sound card problem - This device cannot start. (Code

    hi all,
    here's my situation...
    i had a dell dimension 4400 that came with a sound blaster li've! value(wdm) sound card. i recently got a new motherboard/case etc. i transferred the sound card to my new system and i get a "This device cannot start. (Code 0)" error when i check device manager. for some reason, the game port on the sound card is working fine, but the audio processor part has the error. windows recognizes the card, but it won't use it. the card is a little over 3 years old.
    now, i've read the forums, tried a clean install, registry tweaks, changed bios settings, even did a hd format. i also tried different pci slots. i have sp2 and all my other drivers are updated.
    the new motherboard i have is a gigabyte 8ipe000g. i already contacted gigabyte, did not get much help. it has onboard ac97 audio. i disabled the onboard audio, but it did not seem to change anything. i have also tried windows drivers, the dell drivers from the cd, and the drivers from the creative website. none of them changed anything. i am now having trouble removing the drivers from add/remove programs. i keep removing them, but they still remain, even after using the wdm driver remover from the cd (a file named ctapxx.exe, or something similar). it's almost like windows is not actually installing the drivers when i install them. i'm wondering if the code 0 error is specifically driver related.
    the first time i disabled the onboard audio and updated the drivers a weird thing happened. every time i started the computer up it would crash when it got to the desktop. it no longer does this for some reason, everything now starts up, but i have no audio. the sound card is the only device giving me problems on my system.
    is there anything else i need plugged into the sound card? all i have is the sound card plugged into the pci slot, and an audio cord going from the card to my dvd dri've. is there anything that is supposed to go from the card directly to the motherboard? as far as i can tell, i have everything hooked up correctly. i don't understand why the game port works, but not the audio processor.
    so, i have basically tried everything. seems like quite a few people get code 0 errors with some sort of hardware they have, but it usually seems like there is no definite solution.
    does anyone have a similar problem, or a solution? hopefully i don't have to get a new sound card. i would just stick with my onboard audio, but i hear it can cause problems with games.

    Since you have a new board it maybe a bios setting.
    Is there IRQ conflict from the soundcard.
    Maybe remove the card and unistall the software, use a tool "driver cleaner pro" to remove all creative files.
    Check your mainboard manual on what pci slot that dont share, i hear slot 3 is the one to use, i use slot 5.
    Fit the card and reinstall.
    Best of luck.

  • CUCM AXL Query Phone Off-hook Status

    Hi
    For SOAP/AXL query purposes, does anyone know the table(s) and field(s) within CUCM v7.0 to query a phones' off-hook status? I've had a look through the database dictionary, but could not see anything obviously relating to 'off-hook' or busy. I'm looking to put together a query to find out which users are currently busy taking calls.
    In addition, some of our phones are configured with extension mobility, so not sure whether the query should be focussed on the device profile or line appearance rather than physical handset.
    Any help appreciated!
    Thanks
    Yves

    Hello John,
    You may try to use BLF.
    This is not supported with CCA.
    HTH,
    Alex
    *Please rate helpful posts

  • While extracting file during restore, device disappear from iTunes; then error message "device cannot be found" pop up

    After failing to update iphone OS, now iphone is in restore mode
    Device Manager recognize USB is connected to iphone with Location: Location 0 (Apple Mobile device (recovery mode))
    IPhone in "connect to itunes" screen
    After connect to itunes, message "itunes has detected iphone in recovery mode. You must restore this iphone before it can be used with itunes." appear.
    In Device -> iphone screen, after clicking "Restore" button, itunes status become "Extracting software..."
    During extracting software process, iPhone change from "connect to itunes" screen to just "apple logo", then go back to "connect to itunes" screen; but at the same time device-iphone disappear from itunes; once itunes complete extracting software, error message comes out "The iphone "iphone" could not be restored. The device cannot be found"
    Tried again few times with all USB device removed & turn off all the anti-virus software and all other non window / non-apple softwares; but same thing happened.
    so now I'm stuck.... please help.

    after reading loads of forum, I didn't find anyone with the exact issue as mine. But I've followed some of the restore issue solution and now I've fixed my phone. Yeah! maybe not all the steps are necessary, but here was what I've done to fix it:
    1.     update itunes
    2.     Ensure Apple Mobile device driver is updated and work (i.e. iphones is detected in device manager)
    3.     run "msconfig", ensure all other non microsoft / non apple softwares are off
              - Services: only enable all microsoft services, apple mobile device and bonjour service
              - Startup: only enable QTTask & iTunesHelper
    4.    Restart computer
    5     turn on itunes
    6.    connect iphones via USB.
    7.     itunes show iphone in device column, but iphone still stay in "connect to itunes" screen
    8.     Hold Sleep button + Home button until the screen goes dark (iphone disappear from itunes device column at the same time), then just keep holding the home button (without holding the sleep button)
    9.     first time, though itunes showa iphone in the device column again, but iphone screen go from apple icon straight to "connect to itunes" screen and stay there again.
    10.     I repeat step 8, this time though itunes show iphone in the device column again, but the iphone screen stay dark showing nothing (instead of showing "connect to iTunes" screen)
    11.     then I click restore in itunes, this time it manages to finish extracting software without iphone restarting itself during the process; itunes find the iphone and complete the restore.
    12.     As I do backup all the time, now I just need to sync all the files / setting back to iphone, everything back to normal again.
    still not sure what happened to my phone, but now it's fix =>

  • Wireless 3dTactic Rage - beeping sounds and cannot turn off . . .

    For some weird reason i cannot turn off my headset anymore.
    It doesn't work.
    When i try, it simply looses connection with pc and reconnects. At least i'm guessing that's what's happening.
    The USB transmitter is swithching between blinking and fixed light.
    I've tried re-pairing it a few times now, that stops the connect/disconnect issue but i still can't turn off the power. . .
    Unlike many others who are experiencing problems, i have NOT attempted to install any firmware updates, so i'm at a loss at what is happening here.
    Any suggestions?

    josephd wrote:
    How come wireless synchronization says not available on my Curve 8310?
    Please open a new thead for your issue...this thread is closed.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for