'Paper Available' box / 'printMediaReady' registry key not sticking

I am running a print server on Windows Server 2008 R2. When you open the printer properties box, on the general tab, there is a 'Paper Available' box. All the printers pretty much all say 'letter' in that box - some say Letter and Legal
and we also have some label printers with odd sizes. Anyway, we have some printers that say 'letter' in that box but the printer is only configured to print legal. We have configured that under Printer Preferences and Printing Defaults
- and the printer prints legal just as it should with no issues. However, I have people questioning why it doesn't say legal in that box if it is configured to print legal. In doing a little research I found 2 registry entries that control that
box:
HLKM\System\CurrentControlSet\Control\Print\Printers\printername\DsDriver - printMediaReady
HKLM\Software\Microsoft\Windows\NT\CurrentVersion\Print\Printers\printername\DsDriver - printMediaReady
I found if I change this value it will change the value in that box. However, I have some printers where that doesn't happen. I can make the change, close and reopen regedit to verify it is still there, but as soon as I open the printer properties
it switches it back to letter. Anyone know why this is happening on some printers and not others or how I can make this change?

Hi Tony,
Thank you for posting your issue in the forum.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards,
Justin Gu

Similar Messages

I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.

Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions?

Notification Server error 2, Registry Key not found?

Hello everyone,
I've got more of a cosmetic problem as it seems atm. When checking the Component Status, I see some red crosses in a couple of components. Two being SMS_SITE_COMPONENT_MANAGER and SMS_NOTIFICATION_SERVER. The site itself seems to be working okay, although
it has some problems here and there, but nothing too troubling.
The first error, located in SMS_SITE_COMPONENT_MANAGER, states that a the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer cannot be written and returns error code 6 - handle invalid.
The second error, located in SMS_NOTIFICATION_SERVER, states that the above mentioned key cannot be found and returns error 2 - cannot find file specified.
I've checked the registry and the key is definitely there. I also checked the permissions and local service, system and the Primary Sites computer account have full permissions.
The Key contains three values:
- Default - REG_SZ - No Data
- Reserved 1 - REG_SZ - No Data
- Reserved 2 - REG_SZ - No Data
I've found this
thread that suggests a site reset as the solution, but that was already done two weeks ago and it's currently not an option as this is a live production system.
Any suggestions?
Best Regards,
Fred

Hi Torsten,
I'm getting the following entries in sitecomp.log:
Component SMS_NOTIFICATION_MANAGER is running.
Writing component specific registry values.
Cannot get copy of HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer registry key on server V000C00001.ODIE.CORP.DIR. The operating system reported error 6: The system cannot find the file specified.
STATMSG: ID=579 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SITE_COMPONENT_MANAGER" SYS=site.domain.com SITE=P00 PID=12940 TID=4816 GMTDATE=Mon May 05 07:35:25.898 2014 ISTR0="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer" ISTR1="site.domain.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
Component SMS_NOTIFICATION_SERVER is running.
I've also checked bgbserver.log and I'm getting the following entries there:
Register a DB connection...
BgbServerController COM wrapper object 59429902 is successfully initialized
Error: CBgbServer::ReadRegistrySettings - Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\NotificationServer on the server. The operating system reported error 2:
STATMSG: ID=578 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_NOTIFICATION_SERVER" SYS=site.domain.com SITE=P00 PID=8440 TID=11628 GMTDATE=Mo Mai 05 09:11:07.219 2014 ISTR0="HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\NotificationServer" ISTR1="site.domain.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
Error: Failed to read settings from registry
Failed to initialize BGB server. Wait 300 seconds to do initialization again
Hope this helps somehow.

Outlook 'Bitness' registry key not set. by 64-bit install of Office 2013

A 32-bit version of Office 2013 was installed by default on Windows 8.
I uninstalled this and installed the 64-bit version as per http://office.microsoft.com/en-us/choose-the-32-bit-or-64-bit-version-of-office-HA102840825.aspx.
But the Outlook "Bitness" registry key is missing, i.e. no \HKEY_LOCAL_MACHINE\Software\Microsoft\Office\15.0\Outlook\Bitness.
(Note: the old 32-bit install had key \HKEY_LOCAL_MACHINE\Software\Microsoft\Office\14.0\Outlook\Bitness)
Thank you for any insights as to why the key isn't set.

Hi,
Thank you for posting in the MSDN Forum.
Since the issue is more relate to the end-user, I'd like to move it to Outlook IT pro forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Best regards
Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Adobe Reader DC Disable_Repair Registry key not working.

Hello friendly helpy folks.
I am installing Adobe Reader DC in a Citrix and RDS environment. I have successfully installed it as a MSI with the transform generated by the Customisation Wizard. However the "Repair Installation" function still needs to be hidden. Searching the interweb gave me this link Installer settings which says that the registry key Disable_Repair should hide it in all versions later than 10.x, however it doesn't. I also tried the HideMenuItems.js to no avail.
Has anyone had any luck with either of these methods? Or can anyone point to me to a solution?
Thanks in advance.
Joe.

I referenced the ETk to get everything turned off except does anyone have any idea how to disable the "store and share files in the document cloud" piece in the tools pane?

Have mutiple registry key error while installing visual studio 2013 update 4

please find the log below after the installation visual studio 2013
2588:1F14][2015-03-11T09:24:55]i000: MUX: SetupAction: Install
[2588:1F14][2015-03-11T09:24:55]i000: MUX: ProductVersion: 12.0.31101.00.00
[2588:1F14][2015-03-11T09:24:55]i000: MUX: ProductLanguage: 1033
[2588:1F14][2015-03-11T09:24:55]i000: MUX: Branch: Rel
[2588:1F14][2015-03-11T09:24:55]i000: MUX: OS: Windows 7 Enterprise
[2588:1F14][2015-03-11T09:24:55]i000: MUX: OSVersion: 6.1.7601.65536
[2588:1F14][2015-03-11T09:24:55]i000: MUX: OSLanguage: 1033
[2588:1F14][2015-03-11T09:24:55]i000: MUX: OSArchitecture: AMD64
[2588:1F14][2015-03-11T09:24:55]i000: MUX: Ux Initialized
[2588:1F14][2015-03-11T09:24:55]i000: MUX: Aquiring mutex 'Global\Devdiv' with a timeout of 0 ms
[2588:1F14][2015-03-11T09:24:55]i000: MUX: Mutex 'Global\Devdiv' ownership: True
[2588:1F14][2015-03-11T09:24:55]i000: MUX: Seen existing cache mutex 'Global\Devdiv CacheMutex': False
[2588:1F14][2015-03-11T09:24:55]i000: MUX: Aquiring mutex 'Global\Devdiv CacheMutex' with a timeout of 60000 ms
[2588:1F14][2015-03-11T09:24:55]i000: MUX: Mutex 'Global\Devdiv CacheMutex' ownership: True
[2588:1C24][2015-03-11T09:24:55]i100: Detect begin, 246 packages
[2588:1F14][2015-03-11T09:24:55]i000: MUX: Wait for Detect to complete
[2588:1C24][2015-03-11T09:24:55]i000: MUX: Detection Phase
[2588:1C24][2015-03-11T09:24:55]i000: MUX: ---------------
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\WebFrameworksTools\Servicing\5.0\VisualStudio12'; variable = 'AspNetWebFxTools_VS2013_Version'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\WebFrameworksTools\Servicing\5.0\VWDExpress12'; variable = 'AspNetWebFxTools_VWD2013_Version'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'blend_core_DetectKeyExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Classes\Installer\Dependencies\Microsoft.VS.Bliss_Core,v12'; variable = 'bliss_core_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'bliss_core_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\12.0\CompilerCore'; variable = 'compilerCore_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'compilerCore_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\12.0\CompilerCore86'; variable = 'compilerCore86_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'compilerCore86_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\11.0\CompilerCore86'; variable = 'compilerCore86D11_Inst'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'compilerCore86D11_Inst' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\11.0\CompilerCore86'; variable = 'compilerCore86D11_Ver'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\11.0\CompilerCore'; variable = 'compilerCoreD11_Inst'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'compilerCoreD11_Inst' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\11.0\CompilerCore'; variable = 'compilerCoreD11_Ver'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\11.0\CompilerCoreWP80'; variable = 'compilerCoreWP80_Inst'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'compilerCoreWP80_Inst' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\11.0\CompilerCoreWP80'; variable = 'compilerCoreWP80_Ver'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\12.0\CompilerX64Arm'; variable = 'compilerx64arm_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'compilerx64arm_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\12.0\CompilerX64Nat'; variable = 'compilerx64nat_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'compilerx64nat_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\12.0\CompilerX64X86'; variable = 'compilerx64x86_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'compilerx64x86_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry value not found. Key = 'SOFTWARE\Microsoft\VisualStudio\SxS\VS7', Value = '11.0'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'Dev11_VC_KeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i052: Condition 'Dev11_VC_KeyExists' evaluates to false.
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vs\Servicing\12.0\devenv'; variable = 'devenv_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'devenv_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'DevEnvAppIdKeyPath' to value ''
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Policies\Microsoft\SystemCertificates\AuthRoot'; variable = 'DisableRootAutoUpdate'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft Corporation\DataFxTools\12.0.0.0'; variable = 'EFTools_2013_VersionKey'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'Ews_DetectKeyExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vs\Servicing\12.0\professional'; variable = 'FLP_Version'
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'help3vs_49_DetectKey' to value '2.1.21005'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'help3vs_49_DetectKeyExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'IEsvcVersionExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'IEsvcVersion' to value '10.0.9200.17229'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\11.0\LibraryCore86'; variable = 'libraryCore86D11_Inst'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'libraryCore86D11_Inst' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\11.0\LibraryCore86'; variable = 'libraryCore86D11_Ver'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\11.0\LibraryCore'; variable = 'libraryCoreD11_Inst'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'libraryCoreD11_Inst' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vc\Servicing\11.0\LibraryCore'; variable = 'libraryCoreD11_Ver'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vs\Servicing\12.0\lightswitch'; variable = 'lightswitchcore_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'lightswitchcore_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vs\Servicing\12.0\lightswitch\1033'; variable = 'lightswitchcoreres_DetectKeyExists_enu'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'lightswitchcoreres_DetectKeyExists_enu' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'MicrosoftRootCertificateAuthority2010AuthRootExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\SystemCertificates\ROOT\Certificates\3B1EFD3A66EA28B16697394703A72CA340A05BD5'; variable = 'MicrosoftRootCertificateAuthority2010RootExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'MicrosoftRootCertificateAuthority2010RootExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'MicrosoftRootCertificateAuthority2011AuthRootExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\SystemCertificates\ROOT\Certificates\8F43288AD272F3103B6FB1428485EA3014C0BCFE'; variable = 'MicrosoftRootCertificateAuthority2011RootExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'MicrosoftRootCertificateAuthority2011RootExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry value not found. Key = 'SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full', Value = 'CBS'
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'netfxfullredist_43_DetectKey' to value '4.5.50938'
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'NetFxFullRedist_InstalledRelease' to value '378758'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'NetFxFullRedist_InstalledReleaseExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'NetFxInstallRoot' to value 'C:\Windows\Microsoft.NET\Framework\'
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'NetFxInstallRoot64' to value 'C:\Windows\Microsoft.NET\Framework64\'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'OpenXmlSDK_DetectKeyExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'OS_BuildNumber' to value '7601'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\MobileTools\Servicing\11.0\WPSDKCore'; variable = 'Phone80Sdk_detectkey'
[2588:1C24][2015-03-11T09:24:55]i000: No products found for UpgradeCode: {2BB587DC-B13D-48C2-A4E0-6523821BCE7D}
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: (null)
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'PortableLibrary_DTP_Exists' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vs\Servicing\12.0\premium'; variable = 'premiumcore_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'premiumcore_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vs\Servicing\12.0\professional'; variable = 'professionalcore_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'professionalcore_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'Ria_Services_Dev12_DetectKey' to value '4.1.62812.0'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'Ria_Services_Dev12_DetectKeyExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'silverlight5_DRT_DetectKey' to value '5.1.30514.0'
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'silverlight5_SDK_DetectKey' to value '5.0.61118.0'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'silverlight5_SDK_DetectKeyExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'SP15_Client_DetectKey' to value '15.0.4569.1506'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\sptools\Servicing\12.0\setup'; variable = 'SPTools_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'SPTools_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\sptools\Servicing\12.0\setup\1033'; variable = 'SPToolsLOC_DetectKeyExists_enu'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'SPToolsLOC_DetectKeyExists_enu' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'ssceruntime_x64_msi_DetectKey' to value '4.0.8876.1'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'ssceruntime_x64_msi_DetectKeyExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'ssceruntime_x86_msi_DetectKey' to value '4.0.8876.1'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'ssceruntime_x86_msi_DetectKeyExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'ssdt_lang_detect_enu' to value '1033'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\tfs\Servicing\12.0\storyboardingcore'; variable = 'storyboardingcore_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'storyboardingcore_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\tfs\Servicing\12.0\storyboardingcore'; variable = 'storyboardingcore_x64_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'storyboardingcore_x64_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'SystemDataVersion' to value '2.0.50727.5483'
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'SystemData64Version' to value '2.0.50727.5483'
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'SystemWebVersion' to value '2.0.50727.5477'
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'SystemWeb64Version' to value '2.0.50727.5477'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vs\Servicing\12.0\teamExplorerCore'; variable = 'teamExplorercore_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'teamExplorercore_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\VSTO Designtime Setup\VS12\O15'; variable = 'trinodt12_84_DetectKey'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\VSTO Designtime Setup\VS12\O15'; variable = 'trinodt12_84_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'trinodt12_84_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\VSTO Designtime Setup\VS12\O15'; variable = 'trinodt12_core_DetectKey'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\VSTO Designtime Setup\VS12\O15'; variable = 'trinodt12_core_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'trinodt12_core_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\VSTO Designtime Setup\VS12\O15_1033'; variable = 'trinodt12lp_85_DetectKey_enu'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\VSTO Designtime Setup\VS12\O15_1033'; variable = 'trinodt12lp_85_DetectKeyExists_enu'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'trinodt12lp_85_DetectKeyExists_enu' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\VSTO Designtime Setup\VS12\O15'; variable = 'trinodt14_83_DetectKey'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\VSTO Designtime Setup\VS12\O15'; variable = 'trinodt14_83_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'trinodt14_83_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\VSTO Designtime Setup\VS12\O15'; variable = 'trinodt14_core_DetectKey'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\VSTO Designtime Setup\VS12\O15'; variable = 'trinodt14_core_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'trinodt14_core_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\VSTO Designtime Setup\VS12\O15_1033'; variable = 'trinodt14lp_86_DetectKey_enu'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\VSTO Designtime Setup\VS12\O15_1033'; variable = 'trinodt14lp_86_DetectKeyExists_enu'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'trinodt14lp_86_DetectKeyExists_enu' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'trintrir_71_DetectKey' to value '10.0.50903'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'trintrir_71_DetectKeyExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'trintrir_72_DetectKey' to value '10.0.50903'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'trintrir_72_DetectKeyExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vs\Servicing\12.0\ultimate'; variable = 'ultimatecore_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'ultimatecore_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: No products found for UpgradeCode: {A910AA6F-893F-3B76-AB22-B285913B5CE1}
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: (null)
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'UltimateCore_Version' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\VC\Servicing\11.0\RuntimeDebug'; variable = 'vcRuntimeDebugD11_Inst'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'vcRuntimeDebugD11_Inst' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\VC\Servicing\11.0\RuntimeDebug'; variable = 'vcRuntimeDebugD11_Ver'
[2588:1C24][2015-03-11T09:24:55]i000: Registry value not found. Key = 'SOFTWARE\Microsoft\VisualStudio\SxS\VS7', Value = '12.0'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'VS_Install_Path_KeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i052: Condition 'VS_Install_Path_KeyExists' evaluates to false.
[2588:1C24][2015-03-11T09:24:55]i000: Registry value not found. Key = 'SOFTWARE\Microsoft\VisualStudio\SxS\VS7', Value = '12.0'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'VS_Install_Path_VC_KeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i052: Condition 'VS_Install_Path_VC_KeyExists' evaluates to false.
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'VSComponentPathVariable' to value ''
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Updates\Microsoft Visual Studio 2013\vsupdate_kb2829760'; variable = 'vsupdate_DetectKey'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Updates\Microsoft Visual Studio 2013\vsupdate_kb2829760'; variable = 'vsupdate_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'vsupdate_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'VSWinExpressAppIdKeyPath' to value ''
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'webdeploy_x64_en_usmsi_902_DetectKey' to value '9.0.1763.0'
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'webdeploy_x86_en_usmsi_901_DetectKey' to value '9.0.1763.0'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Web Tools\Visual Studio 12'; variable = 'WebTools_VS2013_VersionKey'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Web Tools\Visual Studio 2013'; variable = 'WebTools_VS2013_VersionKey_2'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Web Tools\Visual Studio Express 12 for Web'; variable = 'WebTools_VWD2013_VersionKey'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Web Tools\Visual Studio Express 2013 for Web'; variable = 'WebTools_VWD2013_VersionKey_2'
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'WIF_DetectKey' to value 'C:\Program Files\Windows Identity Foundation\v3.5\'
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'WIF_DetectKey_64' to value 'C:\Program Files\Windows Identity Foundation\v3.5\'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'WIF_DetectKeyExists' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'WIF_DetectKeyExists_64' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0'; variable = 'WIFEXT_DetectKeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'WIFEXT_DetectKeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'WIFEXT_DetectKeyExists_64' to value 1
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\VisualStudio\11.0\Setup\VS'; variable = 'Win8Dev_Dev11Path_KeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'Win8Dev_Dev11Path_KeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i052: Condition 'Win8Dev_Dev11Path_KeyExists' evaluates to false.
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\Win8\Servicing\12.0\DevTools'; variable = 'Win8DevTools_detectkey'
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: {1D2CEC61-C3F0-C27E-7280-F9D6B10378BE}
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'WinBlue_AppCertKitx64' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: {F395FD4F-40E5-7B56-2BCB-B3CF52B3B52C}
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'WinBlue_AppCertKitx64x86' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: {550760A2-DC4A-CD2B-3C1B-01E0F9F1279E}
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'WinBlue_AppCertKitx86' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: {76FF502F-6811-F75B-2FEB-0B69BB584031}
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'WinBlue_AppCertKitx86x86' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Windows Kits\Installed Roots'; variable = 'WinBlue_Common_KitsRoot_KeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'WinBlue_Common_KitsRoot_KeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i052: Condition 'WinBlue_Common_KitsRoot_KeyExists' evaluates to false.
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Windows Kits\Installed Roots'; variable = 'WinBlue_Desktop_KitsRoot_KeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'WinBlue_Desktop_KitsRoot_KeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i052: Condition 'WinBlue_Desktop_KitsRoot_KeyExists' evaluates to false.
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Windows Kits\Installed Roots'; variable = 'WinBlue_Intellisense_KitsRoot_KeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'WinBlue_Intellisense_KitsRoot_KeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i052: Condition 'WinBlue_Intellisense_KitsRoot_KeyExists' evaluates to false.
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: {984022F2-9BCA-A41D-6A38-1AE658F01415}
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'WinBlue_SDK_x86' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: {5247E16E-BCF8-95AB-1653-B3F8FBF8B3F1}
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'WinBlue_SDKDXRem_x64' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: {A1CB8286-CFB3-A985-D799-721A0F2A27F3}
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'WinBlue_SDKDXRem_x86' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: {37464E70-B0B9-9DFF-649A-CBE169BAD657}
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'WinBlue_SDKStore_x86' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: {96F4525A-470D-F15C-796E-58D9988C3E5F}
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'WinBlue_SDKStoreDXRem_x64' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: {56AD3004-0B49-967F-F682-B05650B61A78}
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'WinBlue_SDKStoreDXRem_x86' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'Software\Microsoft\Windows Kits\Installed Roots'; variable = 'Windows_EspCD11_LP_detectKey_enu'
[2588:1C24][2015-03-11T09:24:55]i000: Setting string variable 'WindowsBuildNumber' to value '7601'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\winexpress\Servicing\12.0\coremsi\1033'; variable = 'WinExpress12_detectkey_enu'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\Windows Kits\Installed Roots'; variable = 'WinSDK_Desktop_KitsRoot_KeyExists'
[2588:1C24][2015-03-11T09:24:55]i000: Setting numeric variable 'WinSDK_Desktop_KitsRoot_KeyExists' to value 0
[2588:1C24][2015-03-11T09:24:55]i052: Condition 'WinSDK_Desktop_KitsRoot_KeyExists' evaluates to false.
[2588:1C24][2015-03-11T09:24:55]i000: No products found for UpgradeCode: {D82433A9-1D86-3695-B4C5-25E8B1794AE2}
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: (null)
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'BuildTools_CoreRes_Installed' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: No products found for UpgradeCode: {7A02D697-899C-3AB4-8A85-421BE7CBFD9E}
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: (null)
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'BuildTools_Core_Installed' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\MobileTools\Servicing\11.0\WPSDKCore\1033'; variable = 'WpSdk_detectkey_enu'
[2588:1C24][2015-03-11T09:24:55]i000: No products found for UpgradeCode: {D3FFD34D-B716-4496-BFF0-0C34E536DC64}
[2588:1C24][2015-03-11T09:24:55]i000: Product not found: (null)
[2588:1C24][2015-03-11T09:24:55]i000: Setting version variable 'PythonTools_Installed' to value '0.0.0.0'
[2588:1C24][2015-03-11T09:24:55]i106: Calculating patch applicability for target product code: {CFEF48A8-BFB8-3EAC-8BA5-DE4F8AA267CE}, context: Machine
[2588:1C24][2015-03-11T09:24:55]i106: Calculating patch applicability for target product code: {0398BFBC-991B-3275-9463-D2BF91B3C80B}, context: Machine
[2588:1C24][2015-03-11T09:24:56]i106: Calculating patch applicability for target product code: {7BF61FA9-BDFB-4563-98AD-FCB0DA28CCC7}, context: Machine
[2588:1C24][2015-03-11T09:24:56]i052: Condition '(CurrentOperation = "Repair") OR (CurrentOperation = "Uninstall")' evaluates to false.
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Adding package: vs_preclean_vs to package detect list
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i052: Condition '(NOT(RelationType = "Patch") AND NOT (CurrentOperation = "Install"))' evaluates to false.
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Adding package: Preparation_Uninstall_vs_premium to package detect list
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Adding package: vcRuntimeMinimum_x64 to package detect list
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Adding package: VCRedistD11x86 to package detect list
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Adding package: VCRedistD11x64 to package detect list
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Adding package: vcRuntimeAdditional_x86 to package detect list
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Adding package: vcRuntimeAdditional_x64 to package detect list
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Adding package: vcRuntimeDebug_x86 to package detect list
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Adding package: vcRuntimeDebug_x64 to package detect list
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Adding package: vcRuntimeDebugD11_x86 to package detect list
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Adding package: vcRuntimeDebugD11_x64 to package detect list
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Reset Result
[2588:1C24][2015-03-11T09:24:56]i052: Condition '(((SystemDataVersion >= v2.0.50727.5459) AND (SystemDataVersion < v2.0.50727.5650)) OR (SystemDataVersion >= v2.0.50727.5721)) AND (((SystemWebVersion >= v2.0.50727.5459) AND (SystemWebVersion <
v2.0.50727.5650)) OR (SystemWebVersion >= v2.0.50727.5721))' evaluates to true.
[2588:1C24][2015-03-11T09:24:56]i000: MUX: Adding package: windows61_kb2664825_x86msu to package detect list

Hello Pavanredd,
From current logs you pasted, your error may due to the following:
1. The installation package is corrupt. Ensure you are trying to download the ISO from official site and try verify checksum before use it.
2. You do not have the right to install this product, ensure you are admin when installing and AV software disabled.
3. Your OS has registry error, this may due to corrupt OS and you need to repair or reinstall.
To resolve the above things, please do the following:
1. Downlad the ISO and verify the ISO checksum first, you can find download link from official site and here is the article for you to verify your ISO
https://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs
In this way you will be able to use a good ISO to install, it will fix corruptpackage problem.
2. Check your privilege and run the setup as admin
3. It is hard to say whether it is a OS issue. Maybe more logs are required, please use
http://aka.ms/vscollect
to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/
and share the link here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Illustrator Launch Error: Windows registry was not in the expected state.

Hi All,
I just upgraded to CS3 Design Premium, and I'm I'm getting the following error when I launch Illustrator:
"The Windows registry was not in the expected state. PLease run the Illustrator installer to correct this problem. Illustrator will continue to run, but may not operate properly."
I'm running Vista Ultimate x64 on a dual Xeon workstation with 4GB of RAM. I found the following article in the knowledgebase, but it did not solve the problem:
http://www.adobe.com/go/kb401602
I have also uninstalled CS2, reinstalled CS3 and reinstalled CS3 *again*.
Illustrator does run, but it's slow and unstable. Any thoughts on what's going on and what I can do to fix it? Many thanks!
--Jim.

Hello, any solution on this problem? I've got the problem with Illustrator CS3, XP where I get the registry error at startup and I can't open any .ai files on my computer from explorer. I can open the files by opening from Illustrator. Here's my registry entry:
Registry key not found: .ai
Expected string: Adobe.Illustrator.13
Registry key not found: .eps
Expected string: Adobe.Illustrator.EPS
Registry key not found: .hyp
Expected string: Adobe.Illustrator.Hyphen
Registry key not found: Adobe.Illustrator.Hyphen
Expected string: Adobe Illustrator Hyphenation Dictionary
Registry key not found: Adobe.Illustrator.Hyphen\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,4
Registry key not found: .aip
Expected string: Adobe.Illustrator.Plugin
Registry key not found: Adobe.Illustrator.Plugin
Expected string: Adobe Illustrator Plugin
Registry key not found: Adobe.Illustrator.Plugin\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,5
Registry key not found: .flt
Expected string: Adobe.Illustrator.Filter
Registry key not found: Adobe.Illustrator.Filter
Expected string: Adobe Illustrator Filter
Registry key not found: Adobe.Illustrator.Filter\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,6
Registry key not found: .dct
Expected string: Adobe.Illustrator.Dictionary
Registry key not found: Adobe.Illustrator.Dictionary
Expected string: Adobe Illustrator Spelling Dictionary
Registry key not found: Adobe.Illustrator.Dictionary\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,7
Registry key not found: .sbx
Expected string: Adobe.Illustrator.Tsume
Registry key not found: Adobe.Illustrator.Tsume
Expected string: Adobe Illustrator Tsume File
Registry key not found: Adobe.Illustrator.Tsume\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,8
Registry key not found: .aia
Expected string: Adobe.Illustrator.Action
Registry key not found: Adobe.Illustrator.Action
Expected string: Adobe Illustrator Action File
Registry key not found: Adobe.Illustrator.Action\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,10
Registry key validated: .ase
Registry key validated: Adobe.Illustrator.SwatchExchange
Registry key validated: Adobe.Illustrator.SwatchExchange\DefaultIcon
Registry key validated: .acb
Registry key validated: .acbl
Registry key validated: Adobe.Illustrator.ColorBook
Registry key validated: Adobe.Illustrator.ColorBook\DefaultIcon
Registry key validated: .8bf
Registry key validated: .8bi
Registry key validated: Adobe.Photoshop.Plugin
Registry key validated: Adobe.Photoshop.Plugin\DefaultIcon
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\ProgID
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\VersionIndependentProgID
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\LocalServer32
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\InProcHandler
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\InProcHandler32
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\verb
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\verb\-3
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\verb\-2
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\verb\-1
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\verb\0
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\AuxUserType
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\AuxUserType\2
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\AuxUserType\3
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\MiscStatus
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\MiscStatus\4
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\Insertable
Registry key validated: CLSID\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\DefaultIcon
Registry key validated: Adobe.Illustrator.13\
Registry key validated: Adobe.Illustrator.13\CLSID
Registry key validated: Adobe.Illustrator.13\Insertable
Registry key validated: Adobe.Illustrator.13\.ai\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.eps\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.prf\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.hyp\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.aip\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.flt\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.dct\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.sbx\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.8bf\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.8bi\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.aia\DefaultIcon
Registry key validated: Adobe.Illustrator.13\.ase\DefaultIcon
Registry key validated: Adobe.Illustrator.13\DefaultIcon
Registry key validated: Adobe.Illustrator.13\shell
Registry key validated: Adobe.Illustrator.13\shell\open
Registry key validated: Adobe.Illustrator.13\shell\open\command
Registry key validated: Adobe.Illustrator.13\shell\print\command
Registry key validated: Adobe.Illustrator.13\shell\edit\command
Registry key validated: Adobe.Illustrator.13\shell\edit
Registry key not found: Adobe.Illustrator.EPS\
Expected string: Encapsulated PostScript
Registry key not found: Adobe.Illustrator.EPS\CLSID
Expected string: {CFE97CDD-836F-4c78-B6B7-A36DD433892E}
Registry key not found: Adobe.Illustrator.EPS\Insertable
Expected string:
Registry key not found: Adobe.Illustrator.EPS\DefaultIcon
Expected string: C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe,2
Registry key not found: Adobe.Illustrator.EPS\shell
Expected string:
Registry key not found: Adobe.Illustrator.EPS\shell\open
Expected string:
Registry key not found: Adobe.Illustrator.EPS\shell\open\command
Expected string: "C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe" "%1"
Registry key not found: Adobe.Illustrator.EPS\shell\print\command
Expected string: "C:\Program Files\Adobe\Adobe Illustrator CS3\Support Files\Contents\Windows\Illustrator.exe" /p "%1"
Registry key validated: Adobe.Illustrator.EPS\shell\edit\command
Registry key validated: Adobe.Illustrator.EPS\shell\edit
Registry key not found: Adobe.Illustrator\
Expected string: Adobe Illustrator Artwork 13.0
Registry key not found: Adobe.Illustrator\CLSID
Expected string: {CFE97CDD-836F-4c78-B6B7-A36DD433892E}
Registry key not found: Adobe.Illustrator\CurVer
Expected string: Adobe.Illustrator.13
Registry key validated: Adobe.Illustrator.13\protocol
Registry key validated: Adobe.Illustrator.13\protocol\StdFileEditing
Registry key validated: Adobe.Illustrator.13\protocol\StdFileEditing\server
Registry key not found: Illustrator.Artwork\NotInsertable
Expected string:
Registry key validated: FileType\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}
Registry key validated: FileType\{CFE97CDD-836F-4c78-B6B7-A36DD433892E}\0
OK: Key not found as expected: Adobe.Illustrator.7\shellex\IconHandler
OK: Key not found as expected: Adobe.Illustrator.7\shellex\PropertySheetHandlers\AIPage
OK: Key not found as expected: Adobe.Illustrator.7\shellex\PropertySheetHandlers
OK: Key not found as expected: Adobe.Illustrator.7\shellex
OK: Key not found as expected: CLSID\{697EE7C0-334C-11D0-B826-0020AF

VBScript, check to see if registry keys exist before running script

Hi there,
I am trying to run the following script in my environment and want to ensure that once it's run once and the registry keys are in place, it does not execute again/ run again as this causes issues. I am going
to set it up to run when users log into their machine via group policy so really need to make sure once run it won't execute again. Can anyone advise what I need to add to it to make sure it checks first for the keys in the registry before running again? e8cb48869c395445ade13e3c1c80d154
and 5cb93b24ff710741b7d83b9cb6317992
'-=-=-=-=-=-=-=-=-=-=-=-=-=-
'Written By James McWhinney
'Vancouver BC, Canada
'www.importfanatik.com
'April 26th, 2006
'-=-=-=-=-=-=-=-=-=-=-=-=-=-
const HKEY_CURRENT_USER = &H80000001
strComputer = "."
Set oReg=GetObject( "winmgmts:{impersonationLevel=impersonate}!\\" _
& strComputer & "\root\default:StdRegProv")
RegistryFolder = "Software\Microsoft\Windows NT\" & _
"CurrentVersion\Windows Messaging Subsystem\Profiles\OutlookProfile\"
LDAPdisplayname = "Domino Directory"
LDAPserver = "dominodirectory.company.co.uk"
LDAPport = "389"
LDAPsearchbase = "o=company.co.uk"
'Add Ldap Type Key
sKeyPath = RegistryFolder & "e8cb48869c395445ade13e3c1c80d154\"
oReg.CreateKey HKEY_CURRENT_USER, sKeyPath
oReg.SetBinaryValue HKEY_CURRENT_USER, _
sKeyPath, "00033009", Array(0,0,0,0)
oReg.SetBinaryValue HKEY_CURRENT_USER, _
sKeyPath, "00033e03", Array(&H23,0,0,0)
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , _
"001e3001", "Microsoft LDAP Directory"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , _
"001e3006", "Microsoft LDAP Directory"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , _
"001e300a", "EMABLT.DLL"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , _
"001e3d09", "EMABLT"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , _
"001e3d13", "{6485D268-C2AC-11D1-AD3E-10A0C911C9C0}"
oReg.SetBinaryValue HKEY_CURRENT_USER, sKeyPath, _
"01023d0c", Array(&H5c,&Hb9,&H3b,&H24, _
&Hff,&H71,&H07,&H41,&Hb7,&Hd8,_
&H3b,&H9c,&Hb6,&H31,&H79,&H92)
'Add Ldap connection settings key
sKeyPath = RegistryFolder & "5cb93b24ff710741b7d83b9cb6317992\"
oReg.CreateKey HKEY_CURRENT_USER, sKeyPath
oReg.SetBinaryValue HKEY_CURRENT_USER, _
sKeyPath, "00033009", Array(&H20,0,0,0)
oReg.SetBinaryValue HKEY_CURRENT_USER, sKeyPath, "000b6613", Array(0,0)
oReg.SetBinaryValue HKEY_CURRENT_USER, sKeyPath, "000b6615", Array(0,0)
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e3001", LDAPdisplayname
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e3d09", "EMABLT"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e3d0a", "BJABLR.DLL"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e3d0b", "ServiceEntry"
oReg.SetStringValue HKEY_CURRENT_USER, _
sKeyPath , "001e3d13", "{6485D268-C2AC-11D1-AD3E-10A0C911C9C0}"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e6600", LDAPserver
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e6601", LDAPport
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e6602", ""
oReg.SetStringValue HKEY_CURRENT_USER, _
sKeyPath , "001e6603", LDAPsearchbase
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , _
"001e6604", "(&(mail=*)(|(mail=%s*)" & _
"(|(cn=%s*)(|(sn=%s*)(givenName=%s*)))))"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e6605", "SMTP"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e6606", "mail"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e6607", "60"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e6608", "100"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e6609", "120"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e660a", "15"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e660b", ""
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e660c", "OFF"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e660d", "OFF"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e660e", "NONE"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e660f", "OFF"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e6610", "postalAddress"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e6611", "cn"
oReg.SetStringValue HKEY_CURRENT_USER, sKeyPath , "001e6612", "1"
oReg.SetBinaryValue HKEY_CURRENT_USER, sKeyPath, "001e67f1", Array(&H0a)
oReg.SetBinaryValue HKEY_CURRENT_USER, sKeyPath, "01023615", _
Array(&H50,&Ha7,&H0a,&H61,&H55,&Hde,_
&Hd3,&H11,&H9d,&H60,&H00,_
&Hc0,&H4f,&H4c,&H8e,&Hfa)
oReg.SetBinaryValue HKEY_CURRENT_USER, sKeyPath, "01023d01", _
Array(&He8,&Hcb,&H48,&H86,&H9c,&H39,_
&H54,&H45,&Had,&He1,&H3e,&H3c,_
&H1c,&H80,&Hd1,&H54)
oReg.SetBinaryValue HKEY_CURRENT_USER, sKeyPath, "01026631", _
Array(&H98,&H17,&H82,&H92,&H5b,&H43,_
&H03,&H4b,&H99,&H5d,&H5c,_
&Hc6,&H74,&H88,&H7b,&H34)
oReg.SetBinaryValue HKEY_CURRENT_USER, sKeyPath, "101e3d0f", _
Array(&H02,&H00,&H00,&H00,&H0c,&H00,_
&H00,&H00,&H17,&H00,&H00,&H00,_
&H45,&H4d,&H41,&H42,&H4c,&H54,_
&H2e,&H44,&H4c,&H4c,&H00,&H42,_
&H4a,&H41,&H42,&H4c,&H52,&H2e,_
&H44,&Hc,&H4c,&H00)
'Append to Backup Key for ldap types
sKeyPath = RegistryFolder & "9207f3e0a3b11019908b08002b2a56c2\"
oReg.getBinaryValue HKEY_CURRENT_USER,sKeyPath, "01023d01",Backup
Dim oldLength
oldLength = UBound(Backup)
ReDim Preserve Backup(oldLength+16)
Backup(oldLength+1) = &He8
Backup(oldLength+2) = &Hcb
Backup(oldLength+3) = &H48
Backup(oldLength+4) = &H86
Backup(oldLength+5) = &H9c
Backup(oldLength+6) = &H39
Backup(oldLength+7) = &H54
Backup(oldLength+8) = &H45
Backup(oldLength+9) = &Had
Backup(oldLength+10) = &He1
Backup(oldLength+11) = &H3e
Backup(oldLength+12) = &H3c
Backup(oldLength+13) = &H1c
Backup(oldLength+14) = &H80
Backup(oldLength+15) = &Hd1
Backup(oldLength+16) = &H54
oReg.SetBinaryValue HKEY_CURRENT_USER, sKeyPath, "01023d01", Backup
'Append to Backup Key for ldap connection settings
sKeyPath = RegistryFolder & "9207f3e0a3b11019908b08002b2a56c2\"
oReg.getBinaryValue HKEY_CURRENT_USER,sKeyPath, "01023d0e",Backup
oldLength = UBound(Backup)
ReDim Preserve Backup(oldLength+16)
Backup(oldLength+1) = &H5c
Backup(oldLength+2) = &Hb9
Backup(oldLength+3) = &H3b
Backup(oldLength+4) = &H24
Backup(oldLength+5) = &Hff
Backup(oldLength+6) = &H71
Backup(oldLength+7) = &H07
Backup(oldLength+8) = &H41
Backup(oldLength+9) = &Hb7
Backup(oldLength+10) = &Hd8
Backup(oldLength+11) = &H3b
Backup(oldLength+12) = &H9c
Backup(oldLength+13) = &Hb6
Backup(oldLength+14) = &H31
Backup(oldLength+15) = &H79
Backup(oldLength+16) = &H92
oReg.SetBinaryValue HKEY_CURRENT_USER, sKeyPath, "01023d0e", Backup
'Delete Active Books List Key
sKeyPath = RegistryFolder & "9375CFF0413111d3B88A001" & _
"04B2A6676\{ED475419-B0D6-11D2-8C3B-00104B2A6676}"
oReg.DeleteKey HKEY_CURRENT_USER, sKeyPath

this will help to read computer names from c:\computerlist.txt and connect to each computer and check if the registry exists or not. you need to make sure you run with user that has access to all the computer. this script only checks if the regkey exists
or not. you will have to include logic from your script as to what actually should happen when registry key not found. as always please use this as example and use it at your own risk.
Const HKEY_CURRENT_USER = &H80000001
Const FORREADING = 1
strComputer = "."
inFilename = "c:\Computerlist.txt"
Set fsoIn = CreateObject("scripting.filesystemobject")
Set inFile = fsoIn.OpenTextFile(inFilename, ForReading, True)
While Not inFile.AtEndOfStream
arrComputerNames = Split(inFile.Readline,",")
' arrComputerNames(0) contains the computer name
strComputer = arrComputerNames(0)
StrRegExistFlage = "No"
Set oReg=GetObject( "winmgmts:{impersonationLevel=impersonate}!\\" _
& strComputer & "\root\default:StdRegProv")
strKeyPath = "Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem\Profiles\EvOutlookDeploymentProfile"
oReg.EnumKey HKEY_CURRENT_USER, strKeyPath, arrSubKeys
If isarray(arrSubKeys) then
For Each subkey In arrSubKeys
If subkey = "e8cb48869c395445ade13e3c1c80d154" Then
StrRegExistFlage = "Yes"
ElseIf subkey = "5cb93b24ff710741b7d83b9cb6317992" Then
StrRegExistFlage = "Yes"
End If
Next
Else
Wscript.echo "Reg folder not found on computer " & strComputer
End If
If StrRegExistFlage = "Yes" Then
Wscript.echo "exit script on computer " & strComputer
Else
Wscript.echo "execute script on comptuer " & strComputer
End If
Wend
inFile.close

Availability, registry key exists, dword value not working

Trying to deploy some updates based on a version number in a registry
key. Unfortunately the test is failing regardless of what I set it to.
For example, if my registry key is 14 (0x0000000e) and I set the
application requirement for the key and value to exists and to be less
than 16 (0x00000010), it still fails the check. ZDM 7 SP1 IR4 Netware
6.5 SP8.

Shaun Pond wrote:
> Patrick,
>
> Patrick, Patrick, what am I going to do with you? :) My colleagues
> sweat away writing TIDs, and you don't look for them :) Try TID 7003836
>
Shaun,
Having now read that, can I say... wow.. In 2 IR's they haven't fixed
something that they broke which is a significant piece of functionality?
Especially if this is just a snapins issue? The workaround is to use
an unsupported setup Just my 2 cents. I get the ugly feeling that this
will never be fixed and the "official solution" will be to migrate to
ZCM. Maybe you could light a fire under someones rear to move that up
in the fix list...
That does explain it however as I know I had used it in the past and
I couldn't figure out what I was doing wrong.

Java Plug-in not working with WinXP SP2 Registry Key Missing Error Pop-Up

I have WinXp PRO with SP2 and the Oct 12 Security Update Patch for SP2 loaded and I went to my Control Panel and saw that the JavaRuntime Environment 1.4.2_04 icon was missing and when I went to click the Java Plugin icon to Open it, I got the following message in a Error Pop-Up window:
The system cannot find the registry key specified:
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java pPlug-in\1.4.2_04\JavaHome
I then went to Chage Access Program Controls and when I clicked on the Change box for the program, it wanted me to re-install the whole environment.
Prior to doing this, and potentially screwing up my MS winXp environment, I went to the Sun support page for Java Plug-in and I did get the dancing elmo appear as they said I would but I noticed that my environment was MS VM, not Java and that I was out of date and a newer update was avaliable.
The downloads page for the plug-in states clearly that it supports WinXp SP1 and NOT SP2.
SO, my question is, do I need to re-install anything or wait till the whole SP2 issue and java with (BITS) issue gets resolved and just use the MS VM engine during my browsing time? Is there a workaround and what impact will this have on my system? I am not developing Java Apps but am a Power user in Windows who is wondering if applets and general browsing might be easier, faster and more fluid if the Java Runtime was enabled as opposed to the MS VM solution?
Any ideas or thoughts on this very timely issue would be greatly appreciated as I see others have tried to post related issues but none that succinctly combines what I have asked for here in this post.
Thanks from NYC -Phil

did you know that XP SP2 has so many technical problems? try SP1 or contact the WindowsXP Vendor

Adobe PDF Registry Key for setting Available PostScript Memory

Good evening,
Is there a Registry Key that can be modified to set the "Available Postscript Memory" in the Device Settings tab of the Adobe PDF Converter ?
Thank you,
Jeff

I don't think so - but I'm curious why you would want to ever change
this setting. (It may not do what you think it does).
Aandi Inston

I can not re-install/ update apple iTunes on my HP PC running Win7-64. I get a registry key error when installing and am asked to make sure I have access. IT is a home PC with one user and I have admin priveledges.

When the updater notified me of an iTunes update, I selected the update option. The update failed and killed the version I was running. I have tried for a year to fix the problem without sucess. I can't completely remove all Apple products. I can not install any apple products especially iTunes which is the only one I am interested in.
When I install iTunes now I get a registry key error similar to this:
I am using a machine where I am the only user and am the Admin. I have looked at the security settings on this key and see nothing wrond with it or the parent keys. I tried removing all apple products but ran into similar problems. At this time I still have Bonjour. Mobile Device Support, Software Update, and Application Support installed.

These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time?

SharePoint 2010 with SQL Reporting Services 2012 "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"

i have a small sharepoint farm "2 servers" (WFE) and SQL Server 2012 ,
i installed rsSharePoint for reporting services , as a read the Reporting services is Application Service with SQL 2012 not as SQL 2008 R2 with SharePoint integrated mode, so after installation when am trying to configure the SQL Server
Reporting Services Application services i got the below error :
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"
any kind of help would be much appreciated .

I'm having the same issue, but to me it seems like the instructions I've seen are all over the place. I already have SP 2013 and SQL 2012 SP 1 installed. I already added the features for Reporting Services - Sharepoint and Reporting Services
Add-in for SharePoint Products. I didn't see the Reporting Service service in CA, so I ran the powershell scripts to add SPRSService and SPRSServiceProxy.
My initial quest, was to get the BI features enabled, which took me on the journey of adding the Report Services, then I got the error.
Then when I read this about installing the BI features
http://blogs.msdn.com/b/querysimon/archive/2012/11/26/installing-the-bi-features-of-sharepoint-2013.aspx, which I already had SQL and SP installed. Do I have to rerun and selct the SQL Server PowerPoint for SharePoint option? I have the PowerPoint
Configuration Tool on my SQL server, I run it and I get PowerPivot for SP 2013 Configuranoi is missing prerequisits: SP 2013 EE is required. Which I have EE.
Is Reporting Services different or in addition to the BI Feature (PowerPivot)?
Have I missed a step?
Thanks for you help.
Kim
Kim.Williams

Registry key to Hide Document Message Bar not working in Acrobat 9

In Acrobat 7, am hiding the Document Message bar on top of every PDF document by setting the registry key
i HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\FormsPrefs\bHideDocumentMessageBar.
However, same key is not hiding the message bar in Acrobat 9. Please let me know what is the key in Acrobat 9.

The answer:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\9.0\FeatureLockDown\cDocumentStatus]
"bSuppressMessageBar"=dword:00000000
Sometimes IT-dept. customises without telling it and forgetting it immediately.

Primary key not available

Hi!
When i run my appication client to connect to Oracle9i database i have a next exception:
javax.ejb.CreateException: java.lang.IllegalStateException: Primary key not available.
In Oracle i set a primary key field ID.
Here is my code:
/* Generated by Together */
package ejb;
import javax.ejb.EntityBean;
import javax.ejb.EntityContext;
import javax.ejb.EJBException;
import javax.ejb.CreateException;
import java.sql.SQLException;
import java.sql.Connection;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import java.sql.PreparedStatement;
import javax.ejb.NoSuchEntityException;
import java.sql.ResultSet;
import javax.ejb.DuplicateKeyException;
import javax.ejb.RemoveException;
import java.util.Collection;
import java.util.ArrayList;
import javax.ejb.FinderException;
import javax.sql.DataSource;
import java.lang.Integer;
import java.lang.String;
import java.rmi.RemoteException;
import javax.sql.*;
import java.sql.DriverManager;
public class TestingBean implements EntityBean {
private EntityContext ctx;
public Integer userID;
public String userLogin;
public String userPassword;
public String userPrivilege;
static private final String users_res_ref = "jdbc/Oracle";
public void setEntityContext(EntityContext context) throws EJBException {
System.out.println("EntityContext before = " + ctx);
ctx = context;
System.out.println("EntityContext after = " + ctx);
public void unsetEntityContext() throws EJBException {
ctx = null;
public void ejbActivate() throws EJBException {
public void ejbPassivate() throws EJBException {
public void ejbRemove() throws EJBException {
Connection con = null;
PreparedStatement ps = null;
try {
con = getConnection();
userID = (Integer)ctx.getPrimaryKey();
ps = con.prepareStatement("DELETE FROM TLogon WHERE Id = ?");
ps.setInt(1, userID.intValue());
if (!(ps.executeUpdate() > 0)) {
throw new RemoveException ("ejbLoad: Can't remove user - " + userID);
catch (Exception e) {
throw new EJBException(e);
finally {
closeStatement(ps);
closeConnection(con);
public void ejbStore() throws EJBException {
Connection con = null;
PreparedStatement ps = null;
try {
con = getConnection();
ps = con.prepareStatement("UPDATE TLogon SET Login = ?, Password = ?, Privilege = ? WHERE Id = ?");
ps.setString(1, userLogin);
ps.setString(2, userPassword);
ps.setString(3, userPrivilege);
ps.setInt(4, userID.intValue());
ps.executeUpdate();
catch (Exception e) {
throw new EJBException(e);
finally {
closeStatement(ps);
closeConnection(con);
public void ejbLoad() throws EJBException {
Connection con = null;
PreparedStatement ps = null;
userID = (Integer)ctx.getPrimaryKey();
try {
con = getConnection();
ps = con.prepareStatement("SELECT Id, Login, Password, Privilege FROM TLogon WHERE Id = ?");
ps.setInt(1, userID.intValue());
ps.executeQuery();
ResultSet rs = ps.getResultSet();
rs.next();
userLogin = rs.getString("Login");
userPassword = rs.getString("Password");
userPrivilege = rs.getString("Privilege");
catch (Exception e) {
throw new EJBException("ejbLoad: Can't load user - " + userID);
finally{
closeStatement(ps);
closeConnection(con);
public Integer ejbCreate(Integer aUserID, String aUserLogin, String aUserPassword, String aUserPrivilege) throws CreateException, EJBException, SQLException {
System.out.println("Inititialization parameters...");
this.userID = aUserID;
this.userLogin = aUserLogin;
this.userPassword = aUserPassword;
this.userPrivilege = aUserPrivilege;
System.out.println("Setting connection to null...");
Connection con = null;
PreparedStatement ps = null;
try {
System.out.println("Getting connection...");
con = getConnection();
System.out.println("EntityContext before getting primary key... = " + ctx);
System.out.println("Getting primary key...");
userID = (Integer)ctx.getPrimaryKey();
System.out.println("Primary key is done...");
ps = con.prepareStatement("INSERT INTO TLogon (Id, Login, Password, Privilege) VALUES (?,?,?)");
System.out.println("Inserting data...");
ps.setInt(1, userID.intValue());
ps.setString(2, userLogin);
ps.setString(3, userPassword);
ps.setString(4, userPrivilege);
ps.executeUpdate();
return aUserID;
catch (Exception e) {
throw new CreateException(e.toString());
finally{
closeStatement(ps);
closeConnection(con);
public Integer ejbFindByPrimaryKey(java.lang.Integer pk) throws FinderException, EJBException {
Connection con = null;
PreparedStatement ps = null;
try {
con = getConnection();
ps = con.prepareStatement("SELECT Id, Login, Password, Privilege FROM TLogon WHERE Id = ?");
ps.setInt(1, pk.intValue());
ps.executeQuery();
ResultSet rs = ps.getResultSet();
rs.next();
return pk;
catch(Exception e) {
throw new FinderException (e.toString());
finally {
closeStatement(ps);
closeConnection(con);
public void ejbPostCreate(Integer aUserID, String aUserLogin, String aUserPassword, String aUserPrivilege) throws CreateException, EJBException, SQLException {
/* Write your code here */
public Collection ejbFindAllUsers() throws EJBException, FinderException {
Connection con = null;
PreparedStatement ps = null;
try {
con = getConnection();
ps = con.prepareStatement("SELECT Id FROM TLogon");
ps.executeQuery();
ResultSet rs = ps.getResultSet();
ArrayList v = new ArrayList();
Integer pk;
while(rs.next()) {
pk = new Integer(rs.getInt(1));
v.add(pk);
return v;
catch(Exception e) {
throw new FinderException(e.toString());
finally {
closeStatement(ps);
closeConnection(con);
public Integer getUserID() throws RemoteException, EJBException {return userID;}
public void setUserID(Integer param) throws RemoteException, EJBException {this.userID = param;}
public String getUserLogin() throws RemoteException, EJBException {return userLogin;}
public void setUserLogin(String param) throws RemoteException, EJBException {this.userLogin = param;}
public String getUserPassword() throws RemoteException, EJBException {return userPassword;}
public void setUserPassword(String param) throws RemoteException, EJBException {this.userPassword = param;}
public String getUserPrivilege() throws RemoteException, EJBException {return userPrivilege;}
public void setUserPrivilege(String param) throws RemoteException, EJBException {this.userPrivilege = param;}
private Connection getConnection() throws SQLException {
InitialContext initCtx = null;
try {
initCtx = new InitialContext();
DataSource ds = (javax.sql.DataSource)initCtx.lookup("java:comp/env/" + users_res_ref);
return ds.getConnection();
catch (Exception e) {
throw new EJBException(e);
private void closeStatement(PreparedStatement ps) {
try {
if (ps != null) {ps.close();}
catch (Exception e) {
throw new EJBException(e);
private void closeConnection(Connection con) {
try {
if(con != null) {con.close();}
catch(Exception e) {
throw new EJBException(e);
What i do wrong?
Please help!!!!

Very BIG thank you!!!!
That's right, but i must delete this method only in ejbCreate?
And i have a next exception: java.sql.SQLException: ORA-00947: not enough values. Why?
Here is my code db:
CREATE TABLE "SYSTEM"."TLOGON" ("ID" NUMBER(20) NOT NULL, "LOGIN"
VARCHAR2(20 byte) NOT NULL, "PASSWORD" VARCHAR2(20 byte) NOT
NULL, "PRIVILEGE" VARCHAR2(20 byte) NOT NULL,
CONSTRAINT "ID" PRIMARY KEY("ID")
USING INDEX
TABLESPACE "SYSTEM"
STORAGE ( INITIAL 12K NEXT 12K MINEXTENTS 1 MAXEXTENTS
2147483645 PCTINCREASE 50 FREELISTS 1 FREELIST GROUPS 1)
PCTFREE 10 INITRANS 2 MAXTRANS 255)
TABLESPACE "SYSTEM" PCTFREE 10 PCTUSED 40 INITRANS 1
MAXTRANS 255
STORAGE ( INITIAL 12K NEXT 12K MINEXTENTS 1 MAXEXTENTS 249
PCTINCREASE 50 FREELISTS 1 FREELIST GROUPS 1)
LOGGING
And my client:
package ejb.client;
import javax.naming.Context;
import javax.rmi.PortableRemoteObject;
import ejb.TestingHome;
import ejb.Testing;
import java.util.Collection;
import java.rmi.RemoteException;
import javax.ejb.FinderException;
import javax.naming.InitialContext;
public class TestingClient {
public static void main(String []args) {
try {
System.out.println("Step #1");
Context initial = new InitialContext();
System.out.println("Step #2");
Object objref = initial.lookup("java:comp/env/ejb/SimpleTesting");
System.out.println("Step #3");
ejb.TestingHome home = (ejb.TestingHome)PortableRemoteObject.narrow(objref, ejb.TestingHome.class);
System.out.println("Step #4");
ejb.Testing aTesting;
for(int i = 0; i < 3; i++) {
String login = users[0];
String password = users[i][1];
String privilege = users[i][2];
System.out.println("Adding user..." + login + "\n" + password + "\n" + privilege);
home.create(new Integer(i+1), login, password, privilege);
Integer i = new Integer(2);
home.create(i, "Zatoka", "password", "admin");
catch(Exception e) {
e.printStackTrace();
//private static String JNDI = "ejb.TestingHome";
private final static String[][] users = {{"Zatoka","*****","admin"}, {"Ivanov","234fds","user"},{"Petrov","dcd2","user"}};
BIG thanks!!!

'Paper Available' box / 'printMediaReady' registry key not sticking

Similar Messages

Maybe you are looking for