Paper clip showing and not showing

Why does the paper clip show for attachments in the Inbox and Trash views but not Draft or Sent views?

Hi,
That will hide all the objects in the page, but the page will print blank. I don´t want to print the page.
I can make a removeInstance (to the second page), but then, after print I would like to have my page back (with the data on the objects). However, I can´t make a addinstance...
Any ideas?
Thank you

Similar Messages

When I send an email with an attachment, the paper clip shows up as if there is an attachment, but I can't open it, or find the "download" attachment option?

I am using Firefox and have used Firefox in the past. This just started to occur extremely recently. I have never had a problem with this in the past. When I attach a document in an email, it seems fine, even after I send it. However, the person doesnt get the option to download or view the attachment. It shows the paper clip as if there was an attachment, but there is no way to open it. Has this happened to anyone else or if you have some advice I would greatly appreciate some of your help.

Please do not type in all caps, that is considered shouting and we can hear you just fine.
This is a MS Office issue, I'd suggest taking it up with Microsoft or a MS Office forum.

Since the last update, I cannot attach a file to my email in MobileMe. It has always worked until the latest update. Now, nothing happens when you click on the paper clip icon and 'choose' the file to add.

I am using MobileMe on my Mac. Until the last update a few days ago, Firefox always allowed me to attach files to my emails. Now, when I click on the paper clip, and it takes to me find the file I want to attach, and I highlight the file I want to attach and click on 'open', nothing at all happens. the screen just goes back to my email. It always worked before, it does not now. It DOES work on Safari but I hate Safari, i want to use firefox.

Hi satorilori-
You might try this:
-> Clear Cookies & Cache
https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
-> Clear the Network Cache
-> Reload web page(s) and bypass the cache.
Press and hold Shift and left-click the Reload button.
Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
Press "Cmd + Shift + R" (MAC)
Check and tell if its working. Hope that helps!

Can not load pictures to send...insert/(paper clip) attachments does not work, can not load pics

when I attempt to send an email with pictures, I can not download them,..the bar with "Attachments doesn't do anything when I go to load the pics in the email....it works fine on Internet explorer and was fine before I downloaded Firefox 4....now I am reading that forefox is not using the memory it is supposed to have....should I just find firefox 3. something and use it?

Are you shooting RAW? Are you exporting masters or versions? Is there a size limitation on the Walgreens site?

I use hotmail,and I use to be able to attach files, now when i click the paper clip nothing

When trying to attach files to my e-mail I roll over the paper clip icon and attachment it doesn't high lite, I'm using Hotmail, it does the same thing for office docs and photos

<blockquote>Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.10) Gecko/20100914 Firefox/3.5.7 NET_mmhpset FBSMTWB</blockquote>
You have or had an extension installed (NET_mmhpset) that has changed the user agent from Firefox/3.6.x to Firefox/3.0.x.
You can check the general.useragent prefs on the about:config page.
You can open the about:config page via the location bar, just like you open a website.<br />
Filter: general.useragent<br />
If general.useragent prefs are bold (user set) then you can right-click that pref and choose Reset.<br />
See [[Web sites or add-ons incorrectly report incompatible browser]] and [[Finding your Firefox version]]
See also http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
See these pages and threads about Fast Browser Search (FBSMTWB in the user agent, Help > About).
*http://www.fastbrowsersearch.com/FBS_Toolbar/Help/helpUninstalling.aspx
*http://www.pccybertek.com/2009/05/remove-fast-browser-search
*[/tiki-view_forum_thread.php?forumId=1&comments_parentId=264720]
*http://forums.mozillazine.org/viewtopic.php?f=38&t=1430845
Your above posted system details show outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.0 r32
# Next Generation Java Plug-in 1.6.0_16 for Mozilla browsers
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

My toddler slid a paper clip into my iMac optical drive slot. Drive would not take a disc.

I figured out a way to get the paper clip out and wanted to post for others that may have the same problem. I cut a thin piece of cardboard from a cereal box and added some 2 sided tape to it. I slid the cardboard and tape into the slot and pulled it out slowly. The paper clip came out on the first try.

Now give the toddler the two-sided tape, and hope it sticks!
Good tip, others have had this same problem.

Basic invisible button movie clip frame actions not working, pls. help!

Hi,
I've got a basic little slide show player which is timeline-based, rolling through 5 images with alpha transitions, and on the topmost layer, I have 5 invisible movie clips which have actions applied to them as follows:
on (press) {
gotoAndPlay(21);
This action should allow for the on click button to navigate to that specific frame, or image, but for some reason it is not working.
Did I do something wrong? I feel like I've done this before but I'm rusty with Flash since I don't use it all the time.
Any help is greatly appreciated!
Thanks,
Sean

The invisible movie clip is something I know I've done over the years on many occasions - I'm not sure I'm understanding your alternate technique, can you explain it better? The way my movie clips are invisible is just by setting the alpha to zero in the properties for the movie clip instance (clicking on the object on stage, then setting it in properties)..
Also, the actions are on the invisible movie clips (buttons) and not the timeline.
Cheers,Sean

Form attachments (paper clip vs. button)

Hi,
is it possibel to disable the paper clip functionality in Reader / Acrobat and have full control on attachments in a form via scripted buttons?
For example hadnle paper clip events and block the functionality (add and remove of attachments)
Thanks for any hints on this topic.
J.

I am using LiveCycle Designer ES4. I have an attach button with JavaScript to add and remove attachments. I have logic that does not work correctly if the user attaches using the paperclip.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

"0 B" sized messages and no "paper clip" icon showing

Hello there,
Same problem here: messages displaying correctly on "size" and "paper clip" icon when arriving in my inbox (IMAP), but size becomes "0 b" and paper clip disappears once I move these messages to other folders. Also same
problem when sending new messages. Even stranger: the problem only started recently, when i was already using Outlook 2013 for a while without problems. Definitely a "displaying" problem, since the e-mails themselves are fine. If you move the e-mail
to an offline folder, size and paper clip are displaying again correctly. So it make me conclude that the communication between Outlook 2013 and the IMAP server is causing the problem. Since the issue is not there on my labtop (using Outlook 2007); it has
to do with outlook 2013.

Hi,
I can confirm this issue exists, you may refer to this thread, read the explanation from Microsoft Outlook Forum Support:
http://social.technet.microsoft.com/Forums/office/en-US/970c4fb5-e5ec-4fb9-bf68-399d8119a3eb/outlook-2013-and-missing-attachment-icon?forum=officeitpro
Right now I don't have a method to "fix" this, you may Press Ctrl + Alt + 7 or Ctrl + Alt + 8 to submit your feedback. Once Microsoft hears users' voice, it may be fixed in future updates or versions. Anyway, currently I can't guarantee when it will be fixed.
I'll inform you as soon as there's a fix.
Regards,
Melon Chen
TechNet Community Support

Hp officejet pro 8500 a909a frequently shows out of paper when it is not.

hp officejet pro 8500 a909a frequently shows out of paper when it is not. I am .getting rub marks on the top sheet of paper from the rollers.

Your response to my question seems to reflect a rude attitude simply because I asked this question. In response to your response, I have no manual, and the first place I went for info was the HP website - and I got you.
There are three things that I need from you, and none of them is a sarcastic rude attitude. Please provide me with the following information:
     1. Information on how to clean the rollers.
    2. Your name/employee i.d.
     3.  How to contact your supervisor.
Thank you,
B. Van

Made a 2 minute edit on Final Cut Express but at the 30 seconds (after I exported), there's a clip showing up that is not in my project, a clip i don't want in there, a glitch, how can I correct this problem? I don't want to start over again :(

Basically, I have 2 problems:
1) When I export it shows this clip that's not in my normal project and it ruins my project by having this clip in there; it's like a glitch. I tried to change the clip, and and still doesn't make the project normal again. Tried a new sequence and dragging the project into HD Mode and to no avail.
My camera:
HD: 1080p
Settings: At Hd
2)
Also, it's only displaying black bars above my project, even after exporting at 720p. I just don't want this random clip in my project or the black bars. I'm using Final Cut Express. Does anyone have any possible idea what this could be? Any help woud be much appreciated! I'm clueless on this.
IS ANYBODY OUT THERE? : )

1) Is it a video clip? Something you recognize? To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
2) What are your sequence settings? Right-click your sequence and choose "Item Properties" to verify.

Adobe Paper Texture Pro Menu not showing up.

Installed Adobe Paper Texture Pro and when I click on the "pancake" (upper right of panel) all I get is Close or Close Tab. I do not get the full menu, i.e. Load Textures, etc.
Please tell me how to get the full menu.
I understand now that the PS CC 2014 panel does not have a fly out menu. However, it does provide for loading more textures. I loaded more textures and they showed up but the default textures from Fly Paper did not. I closed and reopened PS and the textures I loaded were gone, only the default textures were there.
Any help would be appreciated.
Message was edited by: Hugh Adams

http://forums.adobe.com/community/photoshop
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

Why is my 40 minute long iMovie showing to be 22.9 gb in total. if i go into all my files there are extra clips there and when i delete any of them it deletes my source clip

Why is my 40 minute long imovie video showing to be 22.9 gb in total if i go into.... all my files.... there are extra clips there and when i delete any of them it deletes my source clip. I think the video should be about 9gb

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

How can I show only text edits and not text formatting when using print comments summary?

Acrobat 9.3.0 for Mac.
Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
I only want to show text edits, not text formatting changes. So questions are:
1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

Hi,
You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
Following idea could be your task flow
Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
|
v
Router
1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
2. if pageFlowScope outcome > 0 then MyPage
hope it helps,
Zeeshan

Paper clip showing and not showing

Similar Messages

Maybe you are looking for