PAPER DUE HELP

Hi out there! I'm in school and I got a paper due and the out line they sent me is PDF file when I open it in word it opens in computer language. I need to be able to fill in the blank lines on the outline that was sent to me. PLEASE help me.

You can't edit it in Word. Open it in Adobe Reader and see if it has interactive form fields. If you don't have Reader, download it and install it. Even if it doesn't have form fields in place, you can use the Add Text tool that's available in Reader 11 to add the text you want, and then save.

Similar Messages

  • Paper Jam help...New .hp Officejet 6100 wireless

    HOW DO I FIX A PAPER JAM FROM PAPER FEED TRAY?  There's 7 sheets of paper in the clump which is half way into the printer.....I have a project due in the morning....HELP!

    Sorry to learn that you are having this issue, trudylynne68;
    This is article will explain and ilustrate how to clear a paper jam on your printer Please follow the order presented
    'Paper Jam' Message Displays on the Computer
    Let me know the outcome I will do my best to help you.
    Hope this helps!
    RobertoR
    ▼
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Looking for a grid paper app HELP???

    an app that when i open it has a graph paper on it and i can use the grid to draw things. something like paint but has graph paper on it

      See if this helps  graph paper.

  • New MX922 Photo Quality is Poor. Have tried different photo paper nothing helps.

    My new MX922 photo quality is terrible. Have tried different photo paper stock same results.
    Have tried several photos checking my setting for the best quality print. My Pixma 640 prints photos just fine. Trying to sell it but, may have too hold onto it if I can't get this resolved.
    Prints documents just fine.
    Any help appreciated.

    Hi desmith1944,
    First, please make sure that the installed ink tanks are correct and full of ink.  The correct order is:
    CLI-251M  magenta
    CLI-251BK  black
    CLI-251Y  yellow
    PGI-250BK black
    CLI-251C  cyan
    Next, please print the nozzle check pattern to determine whether the ink is ejecting properly from the print head. To do this, please follow these steps:
     1.  Make sure that the machine is turned on.
     2.  Load a sheet of A4 or Letter-sized plain paper in the Auto Sheet Feeder or the Cassette.
     3.  Open the Paper Output Tray and then open the Output Tray Extension.
     4.  To print the nozzle check pattern:
         4-1.  Press the MENU button.
         4-2.  Press the Setup button.
         4-3.  Select Maintenance, then press the OK button.  The Maintenance screen is displayed.
         4-4.  Select Print nozzle check pattern and then press the OK button.  The pattern print confirmation screen is displayed.
         4-5.  Select Yes and then press the OK button.
    The nozzle check pattern is printed and the pattern confirmation screens are displayed alternately.  Please compare your printout to the example that has been attached to this message.
    If they differ, perform a few cleanings.  Please perform the following steps to perform a Cleaning:
     1.  Press the MENU button.
     2.  Press the Setup button.
     3.  Select Maintenance then press the OK button.
     4.  Select Cleaning and press OK.
     5.  Press OK to select Yes.
    The cleaning will be performed.  After 2 or 3 cleanings, print another test page.
    Does the test page print correctly?
    If it does, please attempt to print your photo using Easy-PhotoPrint EX.
    If it does not, it is recommended that you contact us for further assistance.  Please use the following link:
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I can't get my Mackbook Pro to print on 11 x 17 paper. Help?

    I can't get my Mackbook Pro to print on 11 x 17 paper to a wireless printer. It will print on 8.5 x 11, even when I select 11 x 17 Help?
    I am smart, smrt.

    I do have the tabloid option, but it won't print to 11 x 17. If I go into page setup in the print menu, the 11 x 17 option is "grayed out" and it can't be selected as a print option. I can go into "manage custom sizes" and put 11 x 17, and it won't work. It doesn't matter what size I select, it prints to 8.5 x 11. Stuck.

  • Black Bars on printed paper - PLEASE HELP -PICTURE INCLUDED.

    Where even I print, black bars on papers appear on the printed paper making it impossible to read whats printed. 
    I will include a picture
    Printer details - 
    Canon Lasershot LBP 2900 
    PICTURE OF BLACK BARS ON PRINTER - 

    1. Open Premiere Elements 8.0.1 and set the project preset (new project dialog) = PAL AVCHD Full HD1080i25.
    2. In the program, Edit Menu/Preferences/General, have a check mark next to "Default Scale to Frame Size".
    3. Right click the Edit Mode Monitor, select Magnification, and have the set on "Fit".
    4.  Using Premiere Elements' Get Media/Files & Folders, import your  AVCHD 1920x 1080 16:9 video into the program. (You will see your video  in the Organizer.)
    5. Drag your video from the Organizer to the Timeline. Are you seeing a 4:3 version of it in the Edit Mode Monitor?
    6. If so, click on the Project Tab in the row below the active Organize (Blue) Tab to bring up the Project Media View.
    7. In the Project Media View, right click your video in the list to bring up the Interpret Footage dialog.
    8.  In the Interpret Footage dialog, under Pixel Aspect Raio, dot the  "Conform to:" and change the setting = Square Pixels (1.0). After you  click OK to that, see what your video now looks like in the Edit Mode  Monitor.
    Miscelleanous
    1. You can also use the Interpret Footage dialog for Frame Rate considerations.
    2.  Although the gspot read out does not give a reading for PAR (Pixel  Aspect Ratio), the PAR can be calculated from the SAR and DAR values  given since PAR = DAR/SAR and, in your case, 1.778/1.778 = 1.0. The DAR  is Display Aspect Ratio and the SAR is Storage Aspect Ratio.
    3.  What is the duration (seconds, minutes, hours) of the video that you  have been trying to use in Premiere Elements 8.0.1. You are working with  AVCHD which is a very resourve demanding format, and it appears that  you have 2 GB RAM installs that probably translates in much less  available and you do not say how much free hard drive space your  computer has. But, if the video in question is only of a few seconds  duration, we should be able to work through this pixel aspect ratio  issue.
    courtesy of AT Romano... 

  • New 2013 macbook air connects to the wifi at school and at my uncles but wont connect to the my wifi at home, What do i do? PLEASE HELP SOON!!!! i have to type a paper for school and i need to be able to do research at home!!!

    it connects to wifi at my uncles and at school. i dont understand why it wont connect at home, im starting to regret getting this. please help. i have a research paper due soon and i need to be able to do research at home!! PLEASE HELP ME!!!

    i forgot to add that it says "connection timeout" whatever that means

  • HELP!! I accidentally hit paste and it deleted my paper.. can i get it back?

    I accidentally hit paste and it deleted my paper.. help!!
    Can it be found?

    Seems that if the clipboard contained a copy of the paper, then when she pasted it should have been pasted back into the document replacing the old selection.
    Nevertheless, this sounds like an overwrite problem, and you cannot recover a file that has been overwritten by another. If your editor does not make automatic backups that you can restore, then your paper is lost for good. But, you can always try recovery software just in case:
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • HELP NOW, PLEASE... MSI KM2M Combo-L Won't boot...!!!

    HELP NOW, PLEASE...  MSI KM2M Combo-L Won't boot...!!!
    1) System was running fine...  
    2) Plugged in Split Mini-Jack from daughter card slot, to Line-In Minijack (where it was before)...
    3) Sound from speakers blurted out loud...
    4) Screen Froze up...  no Ctl-Alt-Delete...
    5) Power button...  No response...
    6) Reset Button...  No Response...
    7) Unplugged...
    8) Try to power on...  
    RES:: No signal to monitor... LED Light on case turns on for about 10 seconds...  CD-rom LED turns on as if BIOS...   Then computer turns off...  Fans Still working...
    THOUGHTS::  Since the speakers are powered through the sound card (and were on at time), then when the Split Mini-Jack Dongle from daughter card, was plugged back into the Line-In Mini-jack port (where it was origionally)...  Something shorted out...  Any Ideas on what, exactly...??  Anyone heard of this before...??  I've never seen something like this before, and PC's have changed SOOO much over the last few years, that I'm kinda in the dark...   But this is my girlfriend's computer, and she has a Mid-Term paper due on Monday (today being Saturday), and I'm in serious trouble right now...  PLEASE HELP...!!!
    The company that built the computer, doesn't seem to be in business anymore...!!!
    (But the waranty sticker is still intact on the case,  she doesn't want me to cut it unless the builder is definitely out of business...)
    Basically...  I'm Screwed...!!!  I need your help...!!!  SOON...!!!
    THANK YOU SO MUCH IN ADVANCE...!!!
    -RudeBoy
    [email protected]

    Danny perhaps better to delete this thread as there is another one already in here.
    and the trouble shooting have already started there.

  • Frustrated, please help me!

    I tried to install maverick. It was the nightmare. Ended up restoring back to factory settings. Another nightmare. Tried to reinstall mac os x lion and it wants my old id and password. I don't remember it. I had to change my password and I'd. Please help. I have a paper due. Thank you.

    I tried to install maverick. It was the nightmare. Ended up restoring back to factory settings. Another nightmare. Tried to reinstall mac os x lion and it wants my old id and password. I don't remember it. I had to change my password and I'd. Please help. I have a paper due. Thank you.

  • Emergency!! Microsoft word help please.

    Ok I have a paper due on Monday for my English class, however whenever I open Microsoft word it just freezes on me and I keep having to force quite. Is there a way I can fix this? I have already sent a message to report the error, but I don't know if they will get it fixed before Monday. Please help.
    And thank you for your time!!
    P.S. it is Microsoft word 2004 and excel and powerpoint work just fine.
    Message was edited by: Said Jawad

    Altrnatively you could try opening your Word docs in Pages, if you have it, or a trial version of pages. I've done this in the past when caught out with Word not working.
    You can also export to Word format from Pages so that when you get Word working again you can continue using it for your college/uni projects.
    Good luck with the paper you are writing!
    Barrie

  • My screen on macpro is grey! help! what to do??

    It was working fine, until I tried installing MAC office, then the screen went black with lots of writing. I turned it off and pressed control+R, this only made the screen on my macpro grey, tried control+r and it asked for internet password, scrren still grey, what to do!! HELP!! Reaserch paper due tomarrow!

    The black screen with writing in several languages telling you to shut down is called a kernel panic. It's usually, but not always, caused by a hardware issue.
    Assume you have OS X 10.7 Lion or 10.8 Mountain Lion?  If so, reboot holding the command and r keys down. On the recovery menu, use Disk Utility to repair the hard drive. When done, assuming any errors are fixed, reboot normally.
    If you have OS X 10.6 Snow Leopard or earlier, you'll need to boot to an OS X DVD, then run Disk Repair from there.

  • Uploading Firefox 4 deleted my bookmarks, printer, cookies, EVERYTHING on my MacAir Please HELP!!!

    I tried to delete Firefox and reinstall it but that didn't help. It seems my printer has been lost all together and my life is falling apart, by the way, if anyone cares. I have a paper due tomorrow and it doesn't look like that's gonna happen.

    It's been a while! It's only pulling info up from 2010

  • HT201263 iPhone 4 shut off and wont turn on after making a call i tried charging & connect to itunes but nothing happened! help

    i was making a call yestrday morning and my iphone shut off and hasnt turned back on.. i tried charging it & connecting it to itunes an still no help someone help me please i have an 2 page research paper due monday

    In that case, it's time to get the device replaced.
    Out of Warranty replacement is $149US for the iPhone4.

  • Help I can't print anything but a smudge!

    I moved and now I'm missing my output paper tray for my HP officejet d145.  I just replaced my two ink cartridges, (painful -- $59),  and the paper comes out, but with no tray below, I have to push up to even get a smudge on the paper. 
    Help!  How can I get a new one, asap?

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

Maybe you are looking for