Paper from different input trays

Hi,
Is it possible to have a document that prints the first page on paper in input tray 1 and the rest on paper from input tray 2 ?
I've looked into the PrintedOutputOptionsSpec object, but there's nothing about input trays there ...
Kind regards,
Yves Vindevogel

IF you know about the device bring printed to, and what to look for in the PDF, you could write a custom plugin that would send the necessary commands to the device. Many people have done just that over the years...

Similar Messages

  • J4540 crumples paper from the input tray

     Was working fine. Just won't feed paper right, skews it to one side, stops the printer, says out of paper. Have cleaned everything, done all it says in HP, in solutions, in forums, checked everything. Can anyone help?

    I had the same problem I raised up the lid where you access the printer cartilages, to the front is a metal bar, there is a screw on each  side take it out. You will find about ten tiny wheels that feed the paper, one of my wheels had slipped off and was laying beneath the bar. It just snapped back on now the feeder works like new

  • How to combine data from different input forms outside a nested iView

    Hi,
    i try to combine data from different input forms in a single one.
    Because of space reasons in Flex compiling i already use nested iViews. Within these nested iViews its possible to use the 'combine' function to do this.
    But in the main iView I cant compose these function with other elements. I need to do this because of using these model in Guided Procedures with output parameters. These parameters I only get with a 'endPoint'. Unfortunatly its not possible to combine data from different input forms into the 'endPoint'.
    Is there any solution?
    Thanx
    Mathias

    Hi Scott,
    i tried this already and i also tried to map all parameters in the endpoint by drawing lines from the other forms and assign the 'empty parameters' by a formula.
    And when i create a collable object in GP and assign the VC iView, only the parameters of the parent-form (the form who trigger the event) are shown as output-parameters.
    Maybe any other ideas? I cant believe that such a simple thing is not possible?!?!
    In my opinion, thats a bug, that I'am not able to use the combine-operator in the main VC-iView. Whats your mind?
    greets
    mathias

  • Printer won't load photo paper from the photo tray

    My HP C7280 won't load the 4x6 photo paper from the photo tray.  The photo tray moves in towards the feeder, but fails to actually load the paper into the feeder.  Any suggestions on how to correct it?  Thank you.
    Mike
    This question was solved.
    View Solution.

    Hey,
    Please take some time and look through this document to make sure that you are loading the paper properly,
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01662562&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    These are the Macintosh instructions but the steps to prepare the photo print are the same but they are steps you would do on Windows just ignore the instructions.
    Have a great day. Get back to me.
    I worked for HP.

  • Have MF8580Cdw. Brand new. Cannot get it to take paper from manual feed tray

    I have a new MF8580Cdw.  Still learning how to operate.  So far, I cannot get it to take paper (labels, etc) from the manual feed tray.  Solutions?

    Hi EHC.
    I will be glad to assist you.
    Please follow the steps below to turn on the tray and change the paper settings for labels:
    1.  Press (Select Paper/Settings).
    2.  Scroll to [Paper Settings], and then press [OK].
    3.  Scroll to [Multi-purpose Tray], and then press [OK].
    4.  Scroll to [ON], and then press [OK].
    5.  Scroll to [Paper Settings], and then press [OK].
    6.  Scroll to [Multi-purpose Tray], and then press [OK].
    7.  Scroll to [Set Details], and then press [OK].
    8.  Scroll to [LTR], and then press [OK].
    9.  Scroll to [Labels], and then press [OK].
    I hope this information is helpful to you.  Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How can I persuade my MX715 that I mean what I say: paper normally to come from the rear tray.

    Yesterday, my printer decided that it would rather be fed from the cassette.  I had changed nothing and since then have re-iterated umpteen times that I want it to take paper from the rear tray, both on paper source settings and properties.  I use too many different types of paper and sizes to make the cassette realistic.
    Help please
    ggoss

    Is the software owned by the company or the employee?  The software should have been registered under a company Adobe ID and not an employee.  It sounds like that serial number is now associated with the employee's own Adobe account and not the company so essentially she owns that serial number.  Your company doesn't sound too efficient when purchasing and managing their own software.
    Your IT department should have had control of all software and ID's.  Have you checked with them to see if they have access to that account?  Is it possible the employee took the software with her when she left then installed it on her own computer?  That might be why your serial number no longer works.
    Adobe's tech support stinks especially if you ask a question outside of their knowledge and what they have on a script.  They may as well have monkeys answering the phone.  Actually monkeys are easier to understand than the reps are.
    Maybe somebody else will come along with a better resolution.  You should return the upgrade of CS6 and may have to either get the CC version or re-purchase the full-price CS6 while it is still available.

  • PAPER TRAY SUCKS. CANNOT PRINT OUT PHOTOS, TRAY ONLY ACCEPTS PAPER FROM BOTTOM TRAY. GRRRR.

    My BRAND NEW (One week from delivery) no longer prints out photos.  It printed out photos several times but 3 days' ago it stopped.
    The paper tray is malfunctioning.  Each time I try to print out a photo (remember, it's been done several times until a few days' ago) THE TRAY WILL NOT ACCEPT PAPER FROM THE TOP TRAY!! 
    SELECTED PHOTOS PRINT OUT ON PAPER FROM BOTTOM TRAY ONLY!!   MY INK AND PAPER IS BEING WASTED AND SEVERAL OTHER POSTERS ARE EXPERIENCING THE SAME ISSUES WITH THE HP 6520!
    Is one of those infamous 2-hr. long marathon phone calls to Tech Support in India the ONLY way one can sensibly have an HP issue resolved? 
    This is ridiculous!

    Hi,
    Sorry to hear you are having problems printing. What device are you using to print?
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • HP officeJet all in one 6310 paper feed issues at input tray

    what could be the cause of my HP officejet 6310 printer intermitantly grabbing multiple pieces of paper at the input tray?
    I have been using the same paper for over a year or 2 with no issues up to the last few months. I have blown out any dust and tried to clean the rollers with alcohol to no avail. Is it a part worn or did I not clean the right part?
    It seems to happen more often with less sheets in tray. any help would be appreciated.

    Hi,
    Here is a link to a document that covers paper feed issues on the OJ 6310.  There's a video which shows some steps about what to do.  Even though you have cleaned rollers the video may contain more information about cleaning other rollers that you may not have cleaned.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02036357&tmp_task=solveCategory&lc=en&dlc=en&cc​...
    I hope that this helps solve your issue.
    ---- If my answer was helpful please click the Kudos star.
    If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
    (I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

  • MX 925 - how to force the printer to use paper from lower tray

    Hi' there,
    Several people seems to have the problem, that the printer "wants" to print from the upper tray, - I assume it's because it want's photo paper. Is it possible to FORCE the printer to use paper from the lower tray, when e.g. you have no photo paper, receive the error message, and just want to see the print?
    :-) Sogge

    I found a methoid that while clumsy, works. I have defined another printer on my windows machine that points to the same
    printer as my original printer defination. I have named this printer "Legal" and has defined legal paper as it's default. When
    I print to this printer( DECTYPE, DECNAME) it now defaults to legal.

  • Output printing from specific printer tray

    Hi,
    We have a printer with each tray containing different paper, in our case it is the color.  Based on the output we want to print, we want it to come out on a paper from a particular tray so that outputs of type X are on yellow, and type Y on pink etc.  Can we accomplish this through printer definition within SAP or we are doomed to writing ABAP of some kind and passing commands "behind the scenes?"
    Thank you,
    Mike

    HI
    I think this would require programming to determine the tray to be used.The problem is that each printer model can have different tray selection commands that are required.Also, if the form is used across multiple areas,each area might have different models.
    However,for a single printer YES,the form would have to be specific to the printer being used.
    Regards
    Chen

  • How do I select main input tray to print photo over ePrint and not photo tray?

    when I send a picture from my Iphone the printer always wants to take paper from the photo tray ,despite that it's set up to take paper from the main tray.

    Hey AndreBielser!
    Unfortunately there isn't a way to select the paper tray through ePrint at this time. Photos will always try to print to the photo tray. The only way I have seen that you can get around this is by including the photo in the body of the message instead of as an attachment. I will definitely pass on the information that this is something you are looking for as a feature of ePrint though!
    Hope this helps!
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Multiple Pages from Different Paper Trays of a Printer

    Hi, I just get a request for cheque printout with remittance advice list (background printing in F110). Because they got preprinted cheque paper, the check number / check detail will only be on the botton of first page, the following pages only contain the continued remittance advice list. So for the first page of all cheques, I'd like take the paper from tray1, and other pages (if there is second even following pages) are from tray 2.
    How can I control in propram or by other way easily?!
    Thanks in Advance

    If You go to SPAD for a particular Printer in the in the Tray Info Tab u You can specify the Paper formats thats needs to be attached to every Tray of the Printer from Tray1 to tray4...
    Hope That Helps
    Anirban M.

  • Tutorial: Print index cards without removing paper from tray for Officejet Pro 8000.

    The HP Officejet Pro 8000 and Officejet Pro 8000 wireless do not have a slot for inserting index cards and envelopes.
    If you are wanting to print index cards without removing the paper from the tray, follow these steps.
    The steps below are for 3 x 5 index cards.
    1.) Open Microsoft Word
    2.) Go to the Insert tab and insert a rectangle shape
    3.) Draw a rectangle of any size
    4.) Right click on the rectangle and select "Format Autoshape..."
    5.) Under the Size tab, enter 5" for the height and 3" for the width (make sure "Absolute" is selected)
    6.) Under the Layout tab, select "Center" for the horizontal alignment
    7.) Click OK
    8.) Use the keyboard up arrow key to move the rectangle to the top of the page.  Make sure the top edge of the rectangle touches the top edge of the document.
    9.) Print this document on plain 8.5" x 11" paper
    10.) When you want to print an index card, place this 8.5x11 document in the paper tray printed side face up.  Then place an index card over the rectangle and align with the border of the rectangle.  After you print the index card, remove the 8.5x11 paper for the next time you need to print an index card.
    Note 1: This are USA instructions.  If you live in the UK or other countries you may have different paper size standards.

    I can't tell you how much I HATE this printer.  I will never buy an HP product again.  BROTHERS printers are simply and easy to use.

  • HP Laserjet P2055dn doesnt take paper from tray 2

    Problem is with a P2055dn printer, it incorrectly thinks there are no paper at tray2. It says "load paper"
    The situation is as such when:
    There is more than 10 papers and less than ab 1.5cm stack of papers. The "sticky roller" that should take the paper from the tray seems to roll and makes a scrieking noise, then it stops and says "load paper". If there is more or less paper the printer works fine.

    Hi jonsed77,
    Welcome to the HP Consumer Printer Forums.
    According to the Specs for this printer, it only has one paper tray (and an automatic document feeder).
    Paper handling
    150-sheet input tray, 35-sheet automatic document feeder
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • In adobe reader, I can't print from different trays?

    Using Adobe Reader, I can't print from different trays on my Lexmark x954 printer.  I've tried reinstalling the print driver (latest version) and reinstalling Adobe Reader with no luck.  I can see the trays and even select them in the print dialog box in adobe but when I print I am unable to print from the correct trays.  It always prints from tray 3 of my printer no matter what tray and type of paper I choose in adobe.  Any suggestions?
    I've also noticed a problem printing through Preview.  I can select different trays using preview but the print time is extremely slow.  It seems like it has to re-download the pdf page each time it goes to print.  So a 100 page print job takes 20-30 minutes to complete which means other have to wait for my job to complete so it really slows our office down.
    Thanks for your help.  Also, I am using the mountain lion operating system.  Thanks again! 

    Don't know whether it will make any difference, but a new version of Adobe Reader has just been released:
    http://www.macupdate.com/app/mac/73/adobe-reader  (version 11.0.03).

Maybe you are looking for