Paper Jam and Scanning issues for the HP Officejet 6600
Had to warranty my printer for same issue and refurbished one is worse.
Hi @Uguessedit,
Welcome to the HP Forums!
I am sorry to hear that your HP Officejet 6600 refurbished printer is worse than your previous printer, but I am happy to help!
For further assistance, I will need some additional information:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies. Copying a Multipage Original in Order (Collating).
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
What type of scanning issues are you having? Are you getting any errors?
In the meantime, please see this guide, A 'Paper Jam' Error Displays on the HP Officejet 6600 e-All-in-One and 6700 Premium e-All-in-One Pri....
Thank you for posting, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!
Similar Messages
-
I had an App on MacBook Air which would cause my computer to be locked. I delted it and reinstalled the App again from the AppStore. Now I am being charged again for the same App. How can I correct this issue and get refund for the double billing?
You can't gift it, gifting can only be done from within the store, not from within your library.
Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Keep getting "paper jam" and there is no jam, help?
keep getting "paper jam" and there is no jam, help? wont print
Try the suggestions in the article I previously linked. To fix your fan issue - Intel-based Macs: Resetting the System Management Controller (SMC)
User Tip: How to deal with MacBook Pro and MacBook heat? -
Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems -
Reporting annoying issues for the entire Microsoft website (MSDN, forums, all)
Is there any place where I can report bugs with how the Microsoft web sites behave? I can only find forums and "Microsoft Answers" categories about single products that Microsoft makes, but nothing about the infrastructure itself.
For about two weeks now, I am required to log into my account every few hours whenever I access any Microsoft website. This includes MSDN help content, forums, or other resources. I need to login after opening the website through F1 help in Visual Studio
as well as accessing a microsoft.com link from anywhere else like a web search or a direct link from web or an application.
Auto-complete does not work either. My browser (Firefox) does save the password, but it never fills it into the form. Other people have already noticed that
Microsoft applies some dirty tricks here. And even if the login is remembers for a moment, it's slow as hell. It takes a second or two to load the login.live.com page (which is not what I wanted to see), then it sits there for some more seconds before going
anywhere. Other login services like Google or StackOverflow manage to log me in all within one second and most of the time I don't even see it.
And then there's still that insecure SSL-to-non-SSL-submit warning that only occurs in other browsers then IE. Has anybody cared about that in the last couple years?! I'm not getting it now, probably because I'm not logged in anymore. It all slowly falls
apart, piece by piece. Next step is probably losing my data or not loading it at all.
THIS – IS – ANNOYING! And it really makes me feel like I don't want to use Microsoft products anymore (because even good desktop applications are connected to that silly website). I have opened a
Microsoft Connect ticket for a part of this issue (it's grown bigger since then), but this ticket is totally ignored. If microsoft.com went down, they'd certainly care within minutes or hours. This bug is not even regarded in
weeks!
So do I have to write a postal letter to the president of the whole company or do they have support staff for that?! Do they have anybody who is capable of maintaining their website? It's really frustrating how Microsoft has a web presence that is worse
than what our first-year trainees come up with. It's full of bugs and this is currently only the most relevant one. Do they even care about how the world sees them? Or is Microsoft currently preparing (and even failing) to move out of business?The brandings are fun. Here's this same thread in a bunch of flavors:
https://social.technet.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/sqlserver/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/vstudio/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/exchange/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
PAPI WS and Process Webservice in the same BPM process
Hello All -
Can we use PAPI-WS and Process Webservice in the same BPM process?
Here is my plan for usage.
i. Use PAPI-WS for instance creation, workflow details and getting process instances.
ii. Use Process Webservice to execute particular task.
Did any one tried this and / or any idea on this?
BR,
Justin.Hi,
You can use both interfaces but keep in mind that when exposing a process as a webservice the two activities that you can invoke are the Begin and the Notification Wait.
Regards -
Table names and field names for the PO item details
Hi,
I want table names and field name for the below fields.
I have PO number i want to get below fields for PO.
<b>Confirmed Ship Date (or actual ship date if already shipped) PGI Date
Quantity of Product to be shipped (base unit of measure) Sales Order Qty
Shipped Quantity of Product (normally zero)
Shipped From Plant Name</b>
Excellent reward is compulsary.
reagrds,
vijayHi,
Please find below the some of tables and fields for the PO. But from your query hope you are refering some other PO.
Table : EKPO
Fields
KTMNG - Target Qty
MENGE - Open Qty
WEPOS - Goods Receipt
LEWED - Latest GR date
Table : EORD
Fields
RESWK - Procurement plant
FRESW - Fixed Issuing plant
LIFNR - Vendor
FLIFN - Fixed vendor
Regards,
BK -
How to reduce logical count and scan count for a select query
hi,
I have two tables one is master and other is history. i need to combine this two tables into one temporary table.
I am using the below query to create temp table.
Select * into temporders
from
(select * from orders
union
select * from ordershistory) b
where updateon= (select max(updateon)from (select updateon,name,units,subunits from orders
union
select updateon,name,units,subunits from ordershistory) a
where updateon <='11/08/2008 11:18 AM' and a.name=b.name and a.units=b.units and a.subunits=b.subunits group by name,units,subunits)
order by report,subunitsorder
the statistics for this query:
SQL Server parse and compile time:
CPU time = 47 ms, elapsed time = 62 ms.
Table 'Worktable'. Scan count 556, logical reads 1569, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0.
Table 'ORDERSHISTORY'. Scan count 116, logical reads 339, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0.
Table 'ORDERS'. Scan count 116, logical reads 285, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0.
SQL Server Execution Times:
CPU time = 32 ms, elapsed time = 63 ms.
(115 row(s) affected)
you see logical reads and scan count for worktable(temporary) is quite high.
So anyone can give a solution for reduce the scan count and logical reads.
NOTE: name,units, subunits,updateon columns have primarykeySQL ServerAm i reading it properly? :(
This is Oracle Forum And not the SQL Server.
Regards.
Satyaki De. -
About report groups and read programs for the object EC_PCA_SUM
Hi Friends,
Hope every one is doing well..!
I've an issue with the report groups and read programs for the object EC_PCA_SUM. As we know that the report groups and read programs available for this object in the application customizing are used to analys the archived data.
That is these programs comes into picture after the archiving operation.
For more information, you can visit the below web site:
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/e4/69f353b75a11d1b5850000e82debc6/frameset.htm]
Now, my question is how would I check the code for these analysing programs available for this object. I can't see this in SE38.
Thanks to reply for this..
Full marks will be awarded.
Regards,
ShamimHi Lakshman,
Thanks for the reply.
Hi Deiter,
You're right.
Your provided transaction "GR55" helped me to find out the program name for a particular group. However, these are just Write and Painter reports.
But can you please let me know the functionality of these report groups ?? what are these used for ???
Do we have these programs for other archiving objects like CO_ITEM,CO_ML_BEL,MM_MATBEL,CO_ORDER,
PP_PLAN,PP_BKFLUSH ??
More points will be awarded.
Thanks a lot.
Regards,
Shamim
Edited by: S H A M I M on Sep 19, 2008 3:19 PM -
How to display Issues for the projects which user can view in the Project Center View
Hello All,
In the project center view, at the bottom, we need to add one table, which can show the Issues for the projects that are displayed in the project center view.(Projects visible to the current user).
Example: A resource 1 can see the Projects Project 1, Project 2,Project 3 in the project center view. So resource 1 should be able to see all the issues that are entered against the Project 1, Project 2, Project 3, irrespective of the issue that has
been assigned to any resource.
Please help.Hi,
You could simply edit the page and add the risks and issues webparts. This will display risks and issues assigned to the user.
Click on edit page, then add webpart. In the Project We App section, pick up the risk webpart and then the issue webpart. Finally drag them to the bottom of the page and close the page.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
Aperture forgets it license and asks me for the serial number over and over again
Hi,
This is getting ridiculous to the point where I'm thinking of just ditching Aperture. It's continually forgetting is license and asking me for the serial number over and over again. I have the original serial number and an upgrade number when I upgraded to v3, but right now, it's not accepting either of them. What's going on and how do I fix it permanently?
Thanks,
RobRob, have you upgraded to Aperture 3.4.3? This is supposed to have fixed the serial number problem:
http://support.apple.com/kb/DL1610
About Aperture 3.4.3
Addresses an issue that could cause a licensed copy of Aperture to prompt for a serial number with each launch
Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise can it not be stored.
Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library, and this requires read/write access for administrators. Do you enter your serial number using an administrator account?
When did this start? Have you migrated your system from from another mac? Then you still may have an older ProAppSystemID file or Aperture cannot write to the System Library.
To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
Quit Aperture.
Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.
Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
Use the Finder's "Go" menu
Go > Got to folder and enter /tmp into the textfield. If you see the file there, move it to its proper location.
In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
Regards
Léonie -
Need to make automatic startup and shut down for the instance
hi to all
i have os : Red Hat lunix as 3 , woth oracle DB 10g 10.0.1
need to make an automatic startup and shut down for the instance when i start and shutdown the OS
i tried Use dbstart and dbshut scripts then created file dbora at dbora as a script
then i did
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora
nothing worked
if you will attach me any files
my mail is :
[email protected]
thanks much
AhmedHi,
The /etc/oratab should have an entry for this database with 'Y' in the last field as:
Oracle_sid: Oracle_Home:Y, so when dbstart command issued it will check the oratab and starts the database.
I advise you to keep the dbstart and dbshut in different scripts and save them directly in the runlevel directories, instead of creating links.
thanks
srinivas. -
Issue for the past 2 hours. Cannot make or receive calls in Little Falls, NJ. Is there a problem with the local tower?
You haven't enabled VoLTE (Advanced calling) have you? Not that it makes a difference just curious.
Have you upgraded to Lollipop yet?
Could be hardware or SIM card issue, read through this thread:
I can't make or take phone calls, but i can message and use data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, two of which have this problem and one just stopped working all together. -
I used an ethernet cable between my iMac and Time Capsule for the initial backup. Now that initial backup is concluded, can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly. Is this assumption correct?
can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly. Is this assumption correct?
Yes, if the computer will be able to receive a strong wireless signal from the Time Capsule.
I did not disable wireless. So I assume the backups are occurring both with the ethernet and wirelessly.
It is inot possible to have both an "active" Ethernet and "active" wireless signal simultaneously. If an Ethernet connection is established, your computer will default to the Ethernet connection. If the Ethernet cable is unplugged, the computer will revert to the wireless connection.
I also show 2 wireless networks available through Airport. Shouldn't there only be one now?
You have a simultaneous dual band Time Capsule. That means that it will always be providing both a 2.4 GHz and a 5 GHz network.
I named my new network the same name as the old network. This enabled all of our devices to continue with their connection without entering the new network and/or passwords; however, I am afraid this may pose problems in the future somehow. Any input on this issue as well?
Things should be fine. Devices will connect to the best signal.....either 2.4 GHz or 5 GHz....based on their capabilties and location in relation to the Time Capsule. -
PKI view , AIA and CDP locatiion for the RootCA has red crossover " unable to download"
I am trying to create a PKI infrastructure on winserver2008R2 enterprise as follows
offline ROOT CA---Standalone
Online Intermediate CA -- enterprise
PROBLEM:
on the intermediate CA: using enterprise PKI view , AIA and CDP locatiion for the RootCA has red crossover " unable to download"but enterprise pki view "manage AD container" indicated the AIA and CDP container
had OK for the root CA CDP and AIA.
Any help will be appreciated
INSTALLATION STEPS :
i performed the ffg on offline RootCA
create the CA policy policy file and store in windows folder
install ADCS
run post installation script
The Certificate Service was successful and saw a green icon in the console
I performed the ffg on online enterprise CA
create the CA policy policy file and store in windows folder
install ADCS
i successfully published the root CA cert and CRL in the local store and AD. i saw the ffg message upon completion
CertUtil: -addstore command completed successfully.
CertUtil: -dsPublish command completed successfully.
install ADCS
below is the output for getreg ( CRL and AIA)
C:\Users\Administrator.GORYEAL>certutil -getreg CA\CRLPublicationURLs
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CertSvc\Configuration\GINTC
A\CRLPublicationURLs:
CRLPublicationURLs REG_MULTI_SZ =
0: 65:C:\Windows\system32\CertSrv\CertEnroll\%3%8%9.crl
CSURL_SERVERPUBLISH -- 1
CSURL_SERVERPUBLISHDELTA -- 40 (64)
1: 79:ldap:///CN=%7%8,CN=%2,CN=CDP,CN=Public Key Services,CN=Services,%6%10
CSURL_SERVERPUBLISH -- 1
CSURL_ADDTOCERTCDP -- 2
CSURL_ADDTOFRESHESTCRL -- 4
CSURL_ADDTOCRLCDP -- 8
CSURL_SERVERPUBLISHDELTA -- 40 (64)
2: 0:http://%1/CertEnroll/%3%8%9.crl
3: 0:file://%1/CertEnroll/%3%8%9.crl
4: 65:file://\\www\Certdata\%3%8%9.crl
CSURL_SERVERPUBLISH -- 1
CSURL_SERVERPUBLISHDELTA -- 40 (64)
CertUtil: -getreg command completed successfully.
C:\Users\Administrator.GORYEAL>certutil -getreg CA\CACertPublicationURLs
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CertSvc\Configuration\GINTC
A\CACertPublicationURLs:
CACertPublicationURLs REG_MULTI_SZ =
0: 1:C:\Windows\system32\CertSrv\CertEnroll\%1_%3%4.crt
CSURL_SERVERPUBLISH -- 1
1: 3:ldap:///CN=%7,CN=AIA,CN=Public Key Services,CN=Services,%6%11
CSURL_SERVERPUBLISH -- 1
CSURL_ADDTOCERTCDP -- 2
2: 0:http://%1/CertEnroll/%1_%3%4.crt
3: 0:file://%1/CertEnroll/%1_%3%4.crt
CertUtil: -getreg command completed successfully.when i ran certutil -URL http://www.goryeal.com/CERTDATA/GROOTCA.crl
i saw a status message of OK
when i paste the url(http://www.goryeal.com/CERTDATA/GROOTCA.crl) from pki view in the browser i got the message:
404 - File or directory not found
But when i copy the url(http://www.goryeal.com/CERTDATA/) in the browser , i was able to see the root ca CRL :
I revoked CA exchange cert and issue a new one but still no luck. Below is the verification for the ca exchange cert:
certutil.exe -verify -urlfetch
c:\ca.cer
Issuer:
CN=GINTCA
DC=goryeal
DC=com
Subject:
CN=GINTCA-Xchg
DC=goryeal
DC=com
Cert Serial Number: 61db778400000000000b
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT (0x40000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwRevocationFreshnessTime: 6 Days, 21 Hours, 50 Minutes, 11 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwRevocationFreshnessTime: 6 Days, 21 Hours, 50 Minutes, 11 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=GINTCA, DC=goryeal, DC=com
NotBefore: 4/2/2014 5:00 PM
NotAfter: 4/9/2014 5:10 PM
Subject: CN=GINTCA-Xchg, DC=goryeal, DC=com
Serial: 61db778400000000000b
Template: CAExchange
Template: CA Exchange
5f c7 75 f7 e9 da 4b 96 ea 05 48 f2 2f 49 0d 96 b8 d0 f7 16
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
Verified "Certificate (0)" Time: 0
[0.0] ldap:///CN=GINTCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?cACertificate?base?objectClass=certificationAuthority
---------------- Certificate CDP
Verified "Base CRL (06)" Time: 0
[0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint
Verified "Delta CRL (06)" Time: 0
[0.0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?deltaRevocationList?base?objectClass=cRLDistributionPoint
---------------- Base CRL CDP
OK "Delta CRL (06)" Time: 0
[0.0] ldap:///CN=GINTCA,CN=INTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?deltaRevocationList?base?objectClass=cRLDistributionPoint
---------------- Certificate OCSP
No URLs "None" Time: 0
CRL 06:
Issuer: CN=GINTCA, DC=goryeal, DC=com
bc c0 e1 8c e1 4c 18 34 5f 06 ca c1 f2 a0 3b 4d 58 9f 27 70
Delta CRL 06:
Issuer: CN=GINTCA, DC=goryeal, DC=com
69 cf 42 09 59 48 3f 07 bf b7 8a 4c 01 a6 45 5f 13 87 da 1b
Issuance[0] = 1.2.3.4.1455.67.89.5
Application[0] = 1.3.6.1.4.1.311.21.5 Private Key Archival
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=GROOTCA
NotBefore: 3/26/2014 8:01 PM
NotAfter: 3/20/2019 8:38 PM
Subject: CN=GINTCA, DC=goryeal, DC=com
Serial: 1297cd88000000000004
Template: SubCA
a4 96 15 fd 62 c1 1c 86 db 21 15 a7 d4 b4 0e 16 8f 03 2c de
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
Verified "Certificate (0)" Time: 0
[0.0] ldap:///CN=GROOTCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?cACertificate?base?objectClass=certificationAuthority
Verified "Certificate (0)" Time: 0
[1.0] http://www.goryeal.com/Certdata/ROOTCA_GROOTCA.crt
---------------- Certificate CDP
Verified "Base CRL (06)" Time: 0
[0.0] ldap:///CN=GROOTCA,CN=ROOTCA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=goryeal,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint
Failed "CDP" Time: 0
Error retrieving URL: Error 0x80190194 (-2145844844)
http://www.goryeal.com/Cerdata/GROOTCA.crl
---------------- Base CRL CDP
No URLs "None" Time: 0
---------------- Certificate OCSP
No URLs "None" Time: 0
CRL 06:
Issuer: CN=GROOTCA
f7 3d fb a7 12 bf f1 b5 e9 35 b7 a1 2b 17 2a 28 29 36 c6 8a
Issuance[0] = 1.2.3.4.1455.67.89.5
CertContext[0][2]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=GROOTCA
NotBefore: 3/20/2014 8:28 PM
NotAfter: 3/20/2019 8:38 PM
Subject: CN=GROOTCA
Serial: 2157e0150f7e149e49295666612464ef
b5 a8 4c e1 64 9d b0 aa c5 e4 b7 b0 4f 5e fe e3 99 aa 61 de
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA
No URLs "None" Time: 0
---------------- Certificate CDP
No URLs "None" Time: 0
---------------- Certificate OCSP
No URLs "None" Time: 0
Issuance[0] = 1.2.3.4.1455.67.89.5
Exclude leaf cert:
e8 5b f7 0b 59 b4 84 97 87 96 1b f1 39 9b 15 14 24 84 d0 77
Full chain:
ca 29 87 01 d8 6f e6 28 d7 16 a9 5c 81 74 d3 b8 1e c9 44 53
Verified Issuance Policies:
1.2.3.4.1455.67.89.5
Verified Application Policies:
1.3.6.1.4.1.311.21.5 Private Key Archival
Leaf certificate revocation check passed
CertUtil: -verify command completed successfully.
Maybe you are looking for
-
How to search the indexes in 11g Enterprise Manager Console
Hi, After setting the Indexes using Java Embedding for a process, can you please tell me how to search the indexes in 11g Enterprise Manager Console for the particular process.In 10g BPEL Console we have the option of searching the Instances based on
-
I hope I get the solution now after trying days and days I am a member of CC and I pay every month. So why there is not a good helpdesk to communicate with.
-
Hi Experts, I'mcreating a popup in a standard way from a normal View called 'MAIN': lr_popup = lr_window_manager->create_window( modal = abap_true window_name = 'WND_POPUPMAIN' title = lv_text close
-
BEx query not getting reflected correctly in OLAP workspace
Hi, I have an OLAP workspace based on a BEx query. Everything works fine with BEx query and We can see the BEx report as required. But in OLAP workspace for one of the feilds (profit center), the workspace is coming with the Texts but not keys. Keys
-
Web Service problem with J2EE server
Hi, I am trying to test my web service from WSADMIN and it's giving me following error: HTTP Status 404 - /wsnavigator/jsps/index.jsp type Status report message /wsnavigator/jsps/index.jsp description The requested resource (/wsnavigator/jsps/index.j