Paper Jam for HP PSC 1610 All-in-One Printer

Paper Jam for HP PSC 1610 All-in-One Printer:
I had a paper jam and cleared the paper from the printer. Now every time I turn the printer "on" it picks up the top piece of paper from the tray and runs it about ½ to ¾ of the way thru the paper feed, stops, and then displays message "paper jam clear paper and then press OK". When I do that it simply picks up the next piece of paper off the tray and does the message again. If I push the OK button on the printer it will simply finish the ejection and then pick up the next paper from the tray, and do the same thing. I have examined the interior (and exterior) of the printer for paper scraps and any other obvious sign of trouble (dirty drive wheels, missing rollers, broken springs, etc...) and can not see anything unusual. I can not print a test print because of the paper jam message. I am running Windows XP and the printer has been working fine for months (until this recent jam). I did all the steps from the HP fix it site including clean rollers, plug and unplugged, carriage travel OK and more. Don't know what to do now........Any help would be great!!!! Thank you!

Hi my printer psc 1610 hp not picking paper

Similar Messages

User Defined Paper Size, Windows 7, PSC 2110 all in one printer

I am trying to print a 5x7 photo using the user defined paper size of my PSC 2110 All-in-One printer. When I used X
P os, it was easy to do. Since upgrading to Windows 7, I have been using the default drivers that load with that, but it doesn't have the ability to define paper size. Is there a driver available that would let me do this? I've tried to use compatability mode to get the original drivers from the installation disc to work, but it won't do it.

Hi,
The last update was for Vista, 5 years ago:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4220...
At this stage, Windows 7 only supplies a very basic and generic print driver for this printer just for print. You may want to keep that way or buy a new printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Officejet and PSC Full Feature Software for HP PSC 1210 All in one printer

Hello ,
I have HP PSC 1210 All in one printer but i am using windows 7 system.how can i find
'HP Officejet and PSC Full Feature Software'
compatible for windows 7, in hp.com i sould find the above software for windows xp but for windows xp its not working, my printer physical keys are not working so i need software to do everyything from print to scan, copy etc from my windows 7 laptop itself. pls help with sofware for windows 7

Hi,
There is not a full feature software Win 7 download available for the HP PSC 1210. The following document includes instructions on how to install the in-OS Win 7 driver with instructions on how to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...=
I work for HP.

What is the password for hp psc 1350 all in one printer. want to connect to ipad.

i have aan all in one printer psc 1350. i want to connect it to ipad in this manner.
IPAD to COMPUTER via WIFI
COMPUTER to PRINTER via USB cable
so when i try to connect ipad to printer, it requires some username and password. i dont know what to type in there.
i am running on a win 7 32 bit

Sorry, but this will not work. Your printer has to be directly on you network, not tethered to a computer that is on the network.
Since your printer is USB only (not a network-able printer), your only solution is to get a new wireless printer. Get one that supports AirPrint if you want to print from your iPad.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photoshop essential.msi missing for hp psc 1610v all in one printer download

after downloading and installing driver and software for hp psc 1610v printer, a microsoft installer keeps trying to install a missing .msi for hp photosmart essentials. my operating system is windows 7 ultimate 64bit on a dell dimension E520. please help me find or install missing msi. Thank-you

This thread, similar to your problem may help
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-Photosmart-Essential-msi-is-missing...
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

1610 all in one printer

My computer is a Gateway GT4024 connected to my 1610 printer via a USB port. My wifes computer is an HP750N and is NOT commected to the printer with a cable.. Both operate on an XP platform. We have a LINKSYS wireless router and both computers have a wireless card. Until last week, both of us could send files to the printer and would print successfully. Now my wife can still print from her computer but I cannot. When I right click on the printer icon and open all printers and faxes, I see where the file I want to print is in the queue but somehow it's not going to the printer to be printed. I tired to print from my computer from WORDPAD but no success. I've reinstalled the software, disconnected the printer for 5 seconds, restarted my computer...still no printing from my computer but we can still print from my wifes computer...any suggestions of what I might try???

Hi @ContraMoros ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP PSC 1610 All-in-One Printer and not having Software installed for your Mac 10.8 system. Your Mac would automatically install any software or drivers needed to operate the printer.
If the printer is not starting up there could be an issue with the wall outlet or the adapter. Here is a document on troubleshooting the printer not coming on.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Psc 1315 all-in-one printer will not feed paper. There is no paper jam.

psc 1315 all-in-one printer has stopped feeding paper. There is no paper jam.

hi there sorry to learn that you are having this issue.
Are you still facing this issue? If you are I will do my best to help you.
Have you upgraded the firmware of your printer lately; you can get the latest firmware in the main support page for your printer
This is the main support page for your printer, GO HERE Go to software and drivers download and select your operating system. You should also upgrade the firmware of the printer.
If you are not experiencing this issue any longer, May you let me know, your time and courtesy,
will be deeply appreciated.
Regards;
RobertoR
remember ==▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

HP PSC 1610 All-In-One doesn't see that paper is loaded

HP PSC 1610 All-In-One doesn't see that paper is loaded and keeps asking me to load paper and press OK. I have done that per manual with no success. What's going on?
I am using an Intel MacBook running SnowLeopard

OK, I think this was among a series of "recalled" (years ago) printers where the feed rollers would become coated with a very slick substance that was outgassing from the rubber. There was a cleaning kit made for this but I am not sure it is still available. Instructions for it are here.
It the absence of the kit, you can clean the rollers manually by removing the rear door and scrubbing the three rollers with Scotchbrite. Red was used in the kit, but green may be aggressive enough to do the job. You may have to fiddle with the printer to clean the entire circumference of the three rollers. Once you do this, you will be good to go for years to come!
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Psc 1610 all-in-one

Can I e-print to my HP PSC 1610 all-in-one?
This question was solved.
View Solution.

Hi JudithAMorrison,
Just to add some extra clarification for you, your PSC 1610 is not able to ePrint, as it was released before HP applied the ePrint technology to their printers. Generally any of the new printers are ePrint capable, so if you are wanting to acquire an HP ePrint enabled printer you can contact HP Tech Support at 1-800-474-6836 and see what sort of deals they have to get you an ePrint enabled printer.
If you need anything further please let me know. Have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

False paper jam error message on Officejet All-in-Ones

I've been helping a not-so-techie friend with his J6450 false paper jam errors. He's now on his second one (got replacement from HP) and has same exact problem. (We think the paper sensor is getting stuck and causing error message.)
His problem is by no means unique. I have looked at customer reviews for this printer on many vendors' websites, and have seen horrible reviews of HP's all-in-ones because of the false paper jam error message. By the way, none of the suggestions here seem to fix the problem, so don't waste your time uninstalling and re-installing the software. The problem is mechanical.
With so many posts regarding false paper jam errors on these HP All-in-Ones, HP should replace these printers with a different model that does NOT have this problem, if such a model exists, at no charge, of course.

I have just spent the last 3 hours thinking I have been overlooking paper somewhere in my J6450 after consistently getting a paper jam error. Of course my warranty has expired! Just wondering if it would be worth fixing OR NOT?

How do I install driver for hp psc 2400 all in one series AND safe wsnmp32.dll Without a Disk?

How do I install driver(s) for hp psc 2400 all in one series ( WIndows 7 laptop) AND a safe version of wsnmp32.dll -- Without a Disk? A tech took the driver off my laptop and I now have no printer/scanner. Help!!
Much thanks!

Hello,
I see that you're having an issue installing the software. I would suggest following this document, which will guide you through several steps on how to resolve the issue.

Can I share HP PSC 1610 All-In-One series printer through Bonjour?

I have an iBook G4, and a Mac Mini (10.4.11- Tiger) with a HP PSC 1610 All In One series printer connected to it by USB. On my iBook G4, the printer comes up under Shared Printers in the Printer Setup Utility but when I click on it, and press Show Info it freezes.. so I was wondering, is there a way to connect to the printer wirelessly with the correct driver (because the driver doesn't show up in the driver list... and the driver is installed.)

Hi my printer psc 1610 hp not picking paper

HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

hi,
I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7. i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

Hi there,
I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Hp psc 1210 all in one printer feeding error

I have a model 1210 all in one printer and it will not feed paper. it sounds like something its working, but not gripping the paper. PLEASE ADVISE

Hello @anne0701 , and welcome to the HP Forums!
I can see you're experiencing paper feed issues. I would like to help!
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest following the steps in this video on PSC feed issues:
Fixing Paper Pick-Up Issues - HP PSC 1200 All-in-One Printer
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Does hp support a HP psc 1500 all in one printer

I can not print in black. I've re uninstalled and re installed my printer at least 6 times, can not find my printer which is a HP psc 1500 all in one listed therefore I used software for 1510 all in one. It prints all text in light blue. I've tried changing my printing preferences many different ways. Nothing seems to correct this problem. I've run a test page and it printed two lines in black( black print read HP PSC 1500 series and my serial number on the second line) and 3 color blocks and the rest was small squares and small lines in 3 columns. My frustration level is at an all time high. I've literally spent an entire day trying to fix this problem. Please help before I do something RASH. Thank You, Greta2

Hey @greta2,
Welcome to the HP Support Forum. I understand you're having a print quality issue with your HP PSC 1500 All-in-One Printer. I would like to assist you in resolving this and have some steps that may improve your print quality. You were correct in using the 1510 All-in-One drivers as they are compatible with your printer. Additionally, you were very diligent in approaching the problem from a software perspective - this rules out printer settings as being the most likely cause of the absence of black ink in your printouts.
From what you're describing with the test-page printout, I would recommend that you troubleshoot the issue at the hardware level. For starters, click on the following article heading and work your way through Steps 2 through 6 to better diagnose the issue:
Missing, Faded, or Dull Colors
As I suspect your print diagnostic page (Steps 3-6) will be lacking black ink in some parts as before, proceed with the following steps:
Run the clean print cartridges utility
Open the Printer Toolbox. There are two ways to do this:
Open HP Director (or HP Solution Center), select the Settings menu, then the Print Settings submenu, and finally the Printer Toolbox.
Open Printers and Faxes in the Windows Control Panel, then right-click your printer icon and choose Properties. Click on Printing Preferences. Click the Services tab, then the Service This Device icon.
The Printer Toolbox opens. On the Device Services tab, click Clean the Print Cartridges , then follow the on-screen instructions. Up to three levels of cleaning are available. Discard or recycle the page that prints.
Clean the contacts
Gather the following items to clean the cartridge and carriage:
Clean distilled water. Use bottled or filtered water if distilled water is not available. Tap water can contain contaminants that damage the cartridge.
Clean cotton swabs or any soft, lint-free material that will not stick to the cartridges (coffee filters work well).
Sheets of paper or a paper towel to rest the cartridge on during cleaning.
Open the cartridge access door and wait until the carriage is idle and silent.
Disconnect the power cord from the back of the printer.
Remove the cartridge and place it on a piece of paper with the nozzle plate facing up.
NOTE:Do not leave the cartridges outside of the printer for more than 30 minutes. If the cartridge is outside of the printer for too long, the ink can dry and clog the nozzles.
Dip a clean foam-rubber swab or lint-free cloth into distilled water, and then squeeze any excess water from it.
Clean only the copper-colored contacts
Figure : Clean the contacts
Copper-colored contacts
Ink nozzles (do not clean)
Repeat these steps for the other cartridge.
Lightly moisten another cotton swab with distilled water, and then squeeze any excess water from the swab.
Use the swab to clean the electrical contacts in the carriage, located inside the printer on the carriage slots.
Figure : The electrical contacts in the cartridge slots
Wait 10 minutes to allow the cartridge and carriage electrical contacts to dry.
Reinstall the cartridges.
Close the cartridge access door.
Reconnect the power cord to the back of the printer.
Press the Power button to turn on the printer.
Try to print a page.
If you are still unable to print, repeat these steps to clean and reseat the cartridges. Multiple cleanings might be necessary to restore printing.
Black cartridges only: remove and rest for two hours
NOTE:The procedure below will not fix missing lines or streaked bars printed by the tri-color, photo, or gray photo cartridges, or other color printing problems. Only perform the steps below if the black print cartridge has printed defective patterns, or if you notice non-uniform black text darkness.
In the black print cartridge, this problem may be caused by sediments collecting in the nozzle area. Follow the steps below to solve this problem:
Remove the black print cartridge.
If the carriage has a latch, relatch it and then close the printer - this is important. If the printer is not closed, it cannot adequately protect the remaining tri-color cartridge.
Place the cartridge on a level surface with the nozzles up (label down).
Figure : Cartridge with the nozzles up
Allow the cartridge to sit undisturbed for two hours.
Reinstall the cartridge and print another self test page.
Click the Windows Start button, then click Control Panel.
Double-click the Printer and Faxes folder.
Right-click the icon for your printer and choose Preferences.
Choose the Services tab and click Service this Device. The printer Toolbox opens.
On the Devices Services tab, click Print a Diagnostic Page.
Look for defects on the page.
If the self test page shows no defects for the black cartridge, and if the cartridge was new, align the cartridge. To align the cartridge, follow the steps below:
Load fresh, white paper.
Click the Windows Start button, then click Control Panel.
Double-click the Printer and Faxes folder.
Right-click the icon for your printer and choose Preferences.
Choose the Services tab and click Service this Device. The printer Toolbox opens.
On the Device Services tab, click Align the Printer.
If the cartridge was not new, there is no reason to align the printer.
If the page still shows defects, go to the next step.
Replace the problem cartridge
If a cartridge replacement was not tried previously to solve this problem, replace the problem cartridge now. Click here (c00206040) (in English) to see if the cartridge is covered under warranty.
Source: http://support.hp.com/us-en/product/hp-psc-1510-all-in-one-printer-series/428822/model/428823/docume...
Let me know the result of your troubleshooting by responding to this post. Best of luck!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Paper Jam for HP PSC 1610 All-in-One Printer

Similar Messages

Maybe you are looking for