Paper source section for MAC when printing

Does Adobr Reader or any other Adobe product support "Choose paper source by PDF page size" for printing with MAC OSX 10.8.3 system?

Mac or Windows, that's a printer setting. "Scale contents to fit" was what I chose with my Canon Printer and MBP 13", but it was always in the Canon print window. I never saw a "paper source" with my home printer, because my printer only had one source. Still if you have both 8.5 X 11 and Legal cartridges there is a setting for the printer to select that and every multi-cartridge printer I've used, it had to be selected manually.

Similar Messages

  • In Lion, Word for Mac only prints last two digits of year

    In Snow Leopard, the automatic dates that auto fill in Word for Mac (08, 2011) worked fine...BUT since I 'upgraded' to Lion, (10.7.3) only the last two digits of the year will autofill, EVEN in full date mode...ie, SHOULD BE:
    February 21, 2012
    BUT auto filled as: February 21, 12
    I saw on a MS help site that it's ID'ed as a problem in Lion:
    From http://answers.microsoft.com/en-us/mac/forum/macoffice2008-macword/automatic-dat e-entry-doesnt-enter-entire-year/91793432-006b-4f6a-99fa-cf425266cb84
    This was the query:
    automatic date entry doesn't enter entire year
    Applies To: Office for Mac | Office 2008 for Mac | Word for Mac
    When I enter the weekday at the beginning of a sentence, the month, date and year are automatically filled in. However, instead of having the whole years, such as 2011, it only enters the last two digits, such as "11". This is new since an update a month or so ago. I would like to set it back to the original "Friday, November 04, 2011" if possible.
    Appreciate any help I can get.
    ANSWER:
    Its a bug in OSX.7 evidently MS has not rung up Apple and said hey get off your duff and fix this date issue.  If you can find a place to send bug report to Apple do so.
    So I checked the OSX Lion support site on apple.com and could not find an answer.
    Does anyone know how to fix or how to get Apple to fix?
    Thank you.

    It's a bug, but whether it's a bug for Apple to fix or for Microsoft to fix is unknown. The thread you post is unauthoritative, being only comments by other users who have no more idea as to where the bug really lies (unless an Apple engineer has confirmed a Lion bug, something I've not seen) as any other user does; no one in that thread works for or speaks for either Microsoft nor Apple.
    You can comment on the issue to Apple, if you wish:
    http://www.apple.com/feedback/macosx.html
    but whether it's something they can fix or whether it's Microsoft's problem I can't say.
    Regards.

  • I downloaded LR for MAC when my free trial ended.  But - I get a "renew your membership to reactivate the develop module" when I try to edit images.  Help!

    file:///.file/id=7873307.718I downloaded LR for MAC when my free trial ended.  But - I get a "renew your membership to reactivate the develop module" when I try to edit images.  Help!

    If you purchased the Perpetual Licensed version of Lightroom and received a 24 numeric serial number you will have to download the correct version from the link below.
    Before doing the new installation you will have to uninstall the existing version from your computer (it is the Creative Cloud version) since it is requesting you to "renew your membership" . This process will not interfere with your Catalog file, Preferences or your personal files, it will just remove the existing application. Both versions are the same application just a different download and activation process.
    Reboot your system then run the install of the Perpetual License download and input the serial number to activate. Things should be fine.
    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7

  • Elements 10 for MAC cannot print 8x10 on Canon mp970?

    Elements 10 for MAC cannot print 8x10 photos on a Canon MP970 printer . I get a box that says can only print at 220 resolution. What should I do?

    That's not quite what it's saying. It's tell you that at the physical size you chose (presumably 8 x10) your photo has fewer than 220 pixels per inch. So you can print 8 x 10 but the quality may not be first rate, since the original image just doesn't have enough pixels in it to print at that size with more pixel density.

  • Can't select paper type or output quality when printing from new imac....

    Not sure if I'm in the right place to post this question....
    When I try to print (from ANY app; Photoshop, InDesign, etc.) to my hp business jet inkjet printer, I get a print menu, but no where on the print menu (or any pulldown tabs) do I have an opportunity to select paper type or output quality. I am unable to print photos, for example.
    The printer worked fine with the old PC; there is no driver to d/l for mac.
    Only from iPhoto can I select paper type (from a limited number of choices), but not from any other app on my imac. I mostly use InDesign and print flyers and brochures, many with photos, and can't select anything other than plain paper. Do I need a new printer? Genius bar 'help' said they had no idea why it wasn't working....
    HELP!!!
    Thanks!

    Hi Duane,
    Yes, I opened the Printer Driver package, and then pulled up my test InDesign file and selected File>Print, and here's the screen i get: (hope this works, I'm trying Skitch for the first time)...
    [img]http://img.skitch.com/20100219-8ywf49rxkh7heg86n25gefbydc.preview.jpg[/img]
    Click for full size - [color=#A7A7A7]Uploaded with plasq's Skitch[/color]
    when I click on "Setup" in the print menu box, I get this screen:
    [img]http://img.skitch.com/20100219-pgqjnjt1anrx2xic3pih9def3y.preview.jpg[/img]
    Click for full size - [color=#A7A7A7]Uploaded with plasq's Skitch[/color]
    I've clicked on each topic on the left on the Print menu, and still there is no where to select paper type or output resolution.
    The same thing happens when I print from Photoshop.
    Thanks.

  • I lost my ability to use Microsoft Offic for Mac, when I upgraded my MAC from Snow Leopard to Mountain Lion! HELP!

    HELP !
    After I upgraded my operating system on my mac, (from  Snow Leopard (10.6 ? ) to Mountain Lion (10.8.2), virtually ALL of my documents (recipes, update logs, information of untold things), have been denied to me with my Microsoft Word for Mac (which I have used since I purchased my mac in Aug.2008).
          I now get a window that tells me "You can't open the application "Microsoft Word" because PowerPC applications are no longer supported." (Needless to say, I cannot use Excel or anything else, either!)
          Yet, I can still access them, fully (read and even print fro them), individually, by dragging a file into my PREVIEW program!
          What gives?
          I am not a savvy programmer, nor do I confess to somehow being warned that this might happen when I upgraded my operating system.
         Is there any reasonable (easier?) way to continue the use of these (to me) very important files? I only upgraded because I upgraded my iPhone to a 4S and wanted everything to conform to  siimilar circumstances!
         What can I DO?

    You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.

  • Two-fold question, can I export pictures from iphoto to an external drive? I have not been able to create volumes on My Passport for Mac when exporting photos, why is that?

    I have a Mac Book Pro that I use iphoto 6 for my pictures. However, I noticed my hard drive was filling up too rapidly so I purchased a WD My Passport for Mac 500GB. I select photos(the number does not matter), click File>export, and select the location(and yes, I specify the size of picture's maximum, and the file extension, and I click Export and the export initializes and then stops. Telling me that it is unable to create the volumes ont the My Passport. There is plenty of space on the hard drive. I don't know what I am doing wrong. It seems like the process should be very simple to MOVE, COPY, EXPORT photos. Why is this so difficult? What am I doing wrong?

    My photo library cumulative is maybe 1.3 GB tops, however I back it up to the external drive every upload. I don't think the issue is converting calculations because as I said in my previous post, sometimes when I stop transfer to the SD flash drive and restart the copying process it will complete the library of 60-80 photos in about 2 minutes like it should. The issue is that it will not proceed to copy most of the time, and the copying status bar says preparing for a long time

  • HT201250 I just did my first back up with TM and My Passport for Mac, when done adn went into the box ....options...to try and fidn how to delete trash. Then I went back to see if it was erady to do its next scheduled back up and it says there is an error

    I just did my initial back up to hard drive (My Passport for Mac 1TB) with TIme Machine on Snow Leopard. I had wanted to omit trash but couldn't find it. All went great and finished in an hour. Then said would restart at 6pm. I went into options about 20 minutes before (when it was done initially) to try and find how to delete trash from being backed up next time.. THis messed things up and now it doesn't recognize the disk and won't let me manually back up...says error. What do I do?
    JD in AZ

    For all things Time Machine See Pondini's Excellent information here...
    http://pondini.org/OSX/Home.html
    Start Here  >  http://pondini.org/TM/Troubleshooting.html
    Also see the FAQs

  • Acrobat 9 "Choose paper Source by PDF page size" prints as thumbnail

    I have a customer who is trying to print a document that has different page sizes, eg. p.1 is 8 x 11, p.2 is 11 x 17. He can select the page size manually and everything works as expected. If you put a check mark in "Choose paper Source by PDF page size" it prints as backward thumbnails on 8 x 11. Selecting "print as image" makes it fill the page, but only prints on 8 x 11. Changing the printer driver to PCL did not fix, nor did installing an updated PS driver. All updates have been installed. I called tech support and they basically just gave me link to the script they use during troubleshooting. I also did a google search, but haven't come up with a valid answer. It is Acrobat 9 Standard on Win XP. Any advice is good advice.

    It's a Windows only feature: http://kb2.adobe.com/cps/332/332720.html#main_Mixed_sizes

  • Outlook for Mac 2011 print annual calendaar

    Hi,
    I am trying to print my full year calendar, all on one page, preferably A3 from Outlook for Mac 2011.  Does anyone have any idea on how to achieve this?
    Thanks
    Steve

    Hi,
    Since this question is about Outlook for Mac, we should post it to the Office for Mac forum:
    http://answers.microsoft.com/en-us/mac?auth=1
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    You can also find useful information from:
    Printing tips for Outlook 2011
    http://www.macworld.com/article/1154728/outlookprint.html
    How to Print out a copy of your calendar in Microsoft Outlook for Mac 2011
    http://ms-office.wonderhowto.com/how-to/print-out-copy-your-calendar-microsoft-outlook-for-mac-2011-407798/
    Regards,
    Melon Chen
    TechNet Community Support

  • Size of text is too small for pdf when printed

    When I finished filling in the pdf - the text is too small when I printed out the form.

    How did you fill that form: using Adobe Reader?
    When printing, did you check the Page Sizing & Handling options on the Print panel?

  • Software  for  mac  to  print  CD  and  DVD  cases  and  inserts

    I have a powermac/tiger OS X and want to print up CD and DVD sleeves/covers and inserts but i have looked on the web for software that would enable me to do this with my mac and operating system but can not find anything.Does anyone know of any software i could purchase to enable me to do this with my mac ?
    thanks
    rich

    There are several applications that will do that. A couple that are specific are Discus, from Magic Mouse software, and DiscLabel from SmileOnMyMac. A version fo Discus comes with Toast, from Roxio, which is an application that offers advanced disk burning options. I got DiscLabel after getting a LightScribe drive, since it supports that. Both of these will label disks, as well as making covers and inserts.
    Actually, any good paint application will print up the covers and inserts, but these applications will size them automatically. With less specific applications, you will need to do your own layout.

  • Software  for  mac  to  print  up  CD  and  DVD  sleeves  and  inserts

    I have a powermac/tiger OS X and want to print up CD and DVD sleeves/covers and inserts but i have looked on the web for software that would enable me to do this with my mac and operating system but can not find anything.Does anyone know of any software i could purchase to enable me to do this with my mac ?
    thanks
    rich

    Hi Rich ~
    One place to find some is over at Version Tracker:
    http://www.versiontracker.com/macosx/tiger/
    Enter " cd dvd label " into the search field on the top right area and quite a few come up. You can download them and try them out from there. They also have reviews from people who have used it and other useful info.

  • Own cs3 for mac, when I upgrade to cs6 can I go windows????

    This may be a dumb question but I currently own Photoshop cs3. But I'm switching back to a windows and as I said, my cs3 is mac. But when I upgrade to cs6, how will I go about this? Will I need to contact adobe and ask if I can swap for a windows license first or?
    I tried to find an email to support page but it's like adobe doesn't want to help except show you other confused people...
    Thanks

    Order an Adobe product platform swap or language swap
    Mylenium

  • Asking for dockey@ when printing delivery + serial number

    Hi,
    I have some items that are managed by serial number. I  import two reports designed with Crystal reports and set them as default to print Delivery  and serial number items.  I import delivery layout in DLN2 and serial number layout in SRN3.  When I take preview of delivery (Crystal Report Layout), it opens but it starts asking for parameter "DocKey@". When I enter number of delivery it shows exacly what I want (Crystal Report Delivery layout + Crystal Report serial number layout). The issue is asking for DocKey@.
    How can I solve this issue? Is it correct to import Serial Number Layout in SRN3.
    Thanks & Regards,

    Hi,
    links regarding your issue :
    DocKey@ and ObjectID@ tokens required for Crystal Layout
    crystal report pass DocKey@ to stored procedure
    http://scn.sap.com/thread/1979541

Maybe you are looking for

  • My iphone was stolen, how do i to block my iphone so can not be reused ?

    My iphone was stolen, how do i to block my iphone so can not be reused ? pleas help me. thank you

  • 30 Rock with Mac min

    I'd like to know where I can buy a whole DVDs of 30 Rock, so I can play it in my Mac mini? Any place I can go to for purchasing that? Thanks in advance

  • Using files in a jar

    I'm having an issue, it's really kind of strange to me... I am using the Sun One Studio 4 CE to devel. applications I have created two apps in sep directories but under the same parent dir. parent_dir | |- Child_1 | |- File1.class | |- data_dir | | |

  • Publishing VI's on the Internet without open front panels

    I'm using LabVIEW 6.02 and are publishing VI's on the Internet. I'm wondering if it is possible to publish VI's without having the front panels open when you are running the program?Or do they have to be open to be in memory and to be able to get upd

  • Can't Redownload Dreamweaver CC

    I deleted Dreamweaver CC from my computer for a variety of reasons, but now Creative Cloud won't recognize that it's no longer on my machine.  That said, it won't let me redownload Dreamweaver CC.  Help...!  Oh - and I am a subscriber.  Thanks!