Par deploy from IDE hangs and causes Portal to crash

Using the Netweaver 2004s SP7 Preview, on a Windows XP Pro machine, when I use the IDE's Quick Deploy on a Par, most of the time all works fine. But occasionally the deploy hangs in the Deploying Par stage. I have waited as long as an hour to make sure that it is hung. The IDE has to be stoped from Task Manager.
At this point the portal no longer responds. Restarting the system results in the server0 never getting beyond the Starting Framework status.
I found no errors in any logs after the hang or from the attempted restart.
The only way to restart was to restore the file systems from a backup.
Needless to say a three hour restore once or twice a day is very frustrating.
Has anyone seen this behavior?

Hi Antonio,
A couple basic questions that may help us troubleshoot:
1.) What version of LabVIEW are you using?
2.) Are you able to deploy any code to the sbRIO? i.e. something even simpler than what you are already doing.
3.) Have you ever been able to deploy code to this particular sbRIO?
4.) Have you tried formatting and reinstalling the software?
5.) What other troubleshooting steps have you tried?
Aaron P
National Instruments
Applications Engineer
http://www.ni.com/support

Similar Messages

SDM Error while deploying from IDE

Hi I am getting an error while deploying from IDE.
-- Server XXX did not accept login request as admin on port 50018.Details: ERROR: Could not establish connection to server XXX at port 50018: XXX
This problem has been discussed herein SDN earlier.I also checked in the SDM trouble shooting guide and accordingly have added a entry in the host file under sys32/drivers, but still I continue to get that error.Any pointers will be appreciated.
Regards,
Muinul

Hi
Have you ever been able to deploy into SDM. What is the password that you type. Try typing SDM and see. If that doesnt work then you will have to change the password of your SDM. Your password either has been corrupted or changed
Anyway follow these steps
1. Start the Config Tool.
(Execute <SAPj2eeEngine_install_dir> \configtool\configtool.bat.)
1. Select the secure store node.
The configuration for the secure storage in the file system appears.
1. Select the admin/password/<SID> entry.
2. Enter the administrator user's new password in the "Value" field and choose "Add".
3. Choose "File" --> "Apply" to save the data.
Note: Contrary to the message that appears, you do not need to restart the server or cluster for this change to take effect.
4. Finally restart SDM server.
Hope that helps. Let me know if you require more information
regards
Ravi

LiveType is corrupted and causing RadioShift to crash

Hello,
I just upgraded to Leopard and had this issue prior to the upgrade. According to RogueAmoeba support they claim LiveType is corrupted and causing RadioShift to crash. I have iLife 2008. Is this where livetype came from? And if so how can I remove and re-install? Other than of course completley wiping out the iLife install and re-installing?
Thanks Mel

Who is Rogue and why are you listening to them?
What is RadioShift ?
You did not get LiveType with iLife. You had to deliberately install Livetype with a Final Cut product.
bogiesan

Can I deploy from a folder AND a workspace in TestStand

Hi,
Back in the old days of TestStand 2010 sp1, I was able to deploy from both TestStand Public and a Workspace. After analyzing the files, you could view both in the distributed files, and configure the destination of everything, file by file.
In TestStand 2014, I can't seem to figure out how to do this same thing. Whenever I include either a Directory, or TestStand Public in addition to the workspace, the workspace files don't show up in the distributed files. (They do show up in the workspace view, but I can't configure the destination from there... it's grayed out). Further concerning me, when I have only a workspace selected, I do see those files in the distriibuted files view after analyzing.
Has anyone else experienced this? Is my only option now to include everything in the workspace?
CLA, CTA
Not my tempo... AGAIN!
Solved!
Go to Solution.

Al, No Problem. Attached is the error log. From an analysis that makes the workspace files disappear from the distributed files. Thanks again for your help!
CLA, CTA
Not my tempo... AGAIN!
Attachments:
MissingWorkspace.txt ‏50 KB
MissingWorkspace.zip ‏5191 KB

Video choppy and causes frequent hard crashes - flash player issue?

Hi there I recently upgraded to 10.6.8 as my old Mac was running slowly. Since the upgrade video playback has been significantly worse - videos freeze, jump and the sound gets out of sync. This also seems to cause frequent hard crashes of the Mac (also occured during a Skype call). I've tried to uninstall and reload an older version of Flash Player but it doesn't seem to have any effect, neither did installing the click to flash extension. Any ideas on how to resolve this? I'll try and run a youtube video to get an eror report from the next crash. Hope you can help!

Hi Don
Chrome was just the same unfortunately. I've put the question in the software folder here, including the error report:
https://discussions.apple.com/message/21927839#21927839

Windows doesn't recognize Ipod and causes iTunes to Crash. . HELP!!

Hi,
Recently, I plugged in my ipod (30GB Photo) to my computer (running windows XP with SP2) and it caused itunes to crash. I rebooted the machine and tried again and the same thing has happened. I've spent the past day trying to fix it. I have done the following things and nothing has worked:
-reset my IPOD
-formated my IPOD (erased all the songs)
-uninstalled and reinstalled ITUNES & QUICKTIME
-tried to reinstall the ipod on the computer using the original cd.
-disabled startup items to check if anything has been conflicting
-tried all the usb ports on my computer and 2 different wires
I don't know what else to do! I don't think the ipod is formatted for windows anymore (is that possible?) and whenever I try plugging it in, iTunes freezes up until I unplug the ipod. As well, Explorer recognizes it as a "Removable Disk" not IPOD.
Please helpppppp! Thank you sooo much

Hi there
You're pretty much describing a problem I had yesterday.
I've got the 2gb model and initially it was working fine. I run off a 4 port usb hub with other equipment running as well.
Everything was okay but I kept getting a balloon telling me that usb 2.0 would be faster, so I routed my extension cable directly to a usb 2.0 port on my computer and all of what you describe started.
The PC showed my nano as a removeable drive but could not be acesssed. If I managed to get it recognised in itunes (took forever) then it just said it was corrupted and was unable to restore.
After much cursing and trawling the internet for answers, I gave up and put the cable back to the hub.
And.....everything worked again !!
I can only conclude that my hub (quite old) does not work on usb 2.0, or putting the extension cable (5m) straight into my PC causes a power drop / signal loss ??
Are you using an extension cable or a hub? something to try.
Good luck anyway
Regards
Windows XP Pro

Fire fox keeps blocking my allowed sites from changing pages and causing security problems on those sites How do I stop it from do so

Every time I get on my banking site Fire Fox blocks me from changing pages from the sign in page to the account page. It blocks it and I can not sign in to my account. It is an allowed site

hello SalvdrnG24, this sounds like an issue caused by malware on your machine. please perform these steps:
# [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
# afterwards go to firefox > addons > extensions and in case there are still extensions listed there, disable them.
# finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

NAC guest server hangs and guest portal is not working

Hi all ,
Our guest nac server NAC3315 is oftenly getting hung state . And our guest wireless network is not working . We are able to ping the NAC server but web page is not opening for the clients if they connected to guest network.
Any clue on this ....
Thanks!,
Regards,
Vijay.

All actions within the Cisco NAC Guest Server are logged into the database. This enables you to see any action that occurred as part of the normal operating process of the application.
To access the system log from the administration interface select Server > System Log from the left hand menu
Please check the Error Logs for troubleshooting of NGS

Deployment from owb hangs

Hi,
I am using OWB10gr2 and it was working fine
and I was able to deploy and run all the mappings.
Suddenly owb started taking long time for
deploying mappings and it showed status as busy deploying
but it never finished and I had to drop the process and
after that If I login again it deployed fine but gradually
this problem became more frequent and now I am not
able to deploy anything.
Please let me know if someone faced same problem and any solution for same.

HI,
In our case also deployment stops at BEGIN wb_rt_notification.wait( :1 , :2 ,
:3 , :4 , :5 , :6 )
; END;
We have set up OWB in such a way that design repository is in one instance
and we deploy code on different instances and have runtime installed on all other
instances .For all other instances it works fine and for this instance also
it was working fine for last three months but suddenly we started getting this
problem and it is not consistent some time we are able to deploy but other time
we just cannot.Tried everything bounced database even installed runtime again in this instance nothing worked .
Regards,
gswazir

Printing from Elements 9 Organizer causes PSE to crash

Whenever I try to print a picturem from Elements 9 Organizer, a window pops open that says: "Elements 9 Organizer has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." The window contains no error code or further information. My printer is an HP PSC 2170, and the most up-to-date driver already comes with Windows 7, which is my operating system. (I still have Elements 7 on my machine, and it can print without difficulty.) Does anyone have an idea how to fix this major problem with Elements 9?

We have the same issue, running Elements 9 and Windows 7 SP1 64-bit, and have tried a complete uninstall of Elements, reboot, re-install. We had added a new printer recently, so we also tried removing the printer and restarting. I've tried updating Organizer to 9.0.3, but the problem still occurs.
We can print any picture from edit mode, but if we select a picture or pictures and try to print from organizer, it crashes every time.
Anyone have ideas for further troubleshooting?

My external Hard Drive won't transfer files to Mac HD and causes Finder to crash

My external Hard Drive (Western Digital 2TB hard drive in a ICYBOX 2-bay USB 2.0 HD Dock) won't transfer files to the Mac HD. The transfer box comes up but stays at the 'estimating time' stage and remains like that. No matter how big the file/group of files are (biggest I've tried was only 500-odd MB) it won't transfer and stays at the 'estimating time' stage. When I try and stop the transfer, the transfer box remains at the 'stopping' stage until I restart the iMac. I can access other programs during this 'stopping' stage, as long as it doesn't involve the External HD.
When I attempt to open files from the External HD in Photoshop CS4, both Photoshop and Finder stop responding and have I have to 'Force Quit'. However, upon force quitting finder, I loose all icons on the desktop until I restart the Mac via holding down the 'Power' button on the back.
Ive looked at a few forums already and done a couple things they suggested to similar topics.
- I excluded the Ext HD on the Spotlight>Privacy tab.
- I verified the Ext HD via System Utilities. Some errors came up but the Repair was successful and subsequent Verifications have returned as 'OK'.
- I tried the Mac Diagnostic tool as suggested by Apple, but when I press the 'D' key on start up nothing happens.
The annoying thing is that this problem came out of the blue, the Ext HD was working fine 3 days ago.
My system:
iMac 21.5inch, mid 2010
3.6GHz Intel Core i5
8GB 1333 MHz DDR3
OS X 10.9.5 (13F34)
The Ext HD:
Western Digital 2TB
Mac OS Extended (Journalised)
1.91TB available on the HD
Shares a 2 Bay ICYBOX dock with another 2TB WD HD
Connected to the iMac via USB 2.0 to a 4-port USB 2.0 hub
Any help suggestions would be greatly appreciated.
Cheers,
Tom

WD EHDs have an extremely high failure rate so don't be shocked if it is failing. However what you can do first is reset the SMC and PRAM first on the computer, do the SMC reset 2-3 times, sometimes the first try does not work. If this does not work then using another computer move the files to another EHD, this time buy a high quality HD, something like one of these

HT204088 I need a copy of my past purchases from itunes 2010 and 2011 my computer crashed and it was in a folder please help

Hi! I need a copy of my past purchases from itunes since my computer crashed and my receipts were in a folder... 2010 and 2011. I can not print my past history. Now what please?
thank you!

Contact iTS, they can email you your invoice history.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Copying from numbers to prism causes Prism to crash

Can anyone tell me how to convert back to the previous version of number? As now I can not copy and paste from numbers into prism as it crashes, as does the excel for mac so now its impossible to do work as I have to hand type all the numbers into prism.

Ok, I'm having a little trouble reconciling this statement in your original post:
as does the excel for mac
with this in your latest post:
its not copying between numbers and excel that's the problem
If you are in fact able to copy-paste into Excel from Numbers 3 than you should be able to copy-paste into Prism too.
It seems very likely there's something specific in your dataset that needs correcting anyway. It's much less likely that this is a Numbers 2 vs Numbers 3 issue, assuming you have the latest version of Numbers 3 (3.2).
SG

I am using my MacBook for person and work purposes. Will I overload it and cause it to crash? And how can I finance a new one without paying all upfront?

I am afraid that my computer won't be able to hold all of my files for work and personal use. Will it? And if I get a new notebook strictly for work, how can I finance it without paying all upfront?

It would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion or 10.8 Mountain Lion). When System Profiler comes up check the Model Identifier and post it back here.
Rather than buying a MacBook Pro to replace your MacBook you can just get a bigger hard drive. You can get a 1tb drive for around $100 and they are easy to replace in a MacBook.

Ipod not recognized by windows and causes programs to crash

for some reason my ipod is acting weird. the other day it froze an so i restored it and it was working fine. now i connected it to my firewire (my ipod is a click wheel one) and when i hooked it up to my firewire to update on itunes, i noticed that like all of my windows that were open started to freeze including itunes. when i disconnected the ipod everything works fine. and now i cant restore the ipod because its not recognized by my computer. i put it in disk mode but when i hook it up to the firewire, it doesnt show on my computer and my programs freeze.
can someone please help me. i couldnt try the 5 r's or whatever because the ipod freezes when connected. and i tried http://discussions.apple.com/thread.jspa?threadID=461952&tstart=75
but it didint work cuz i waited like 10 minutes after hooking up my ipod and it stil was not being recognized.
please please help me someone
custom Windows XP

thanks for the info guys, ive never used my ipod on a mac (not that im aware of) and i would try using the usb but my computer does not have that 2.0 high speed usb thing so im forced to use the firewire. its weird cuz yesterday i uninstalled itunes and the ipod and when i installed everything, my computer recognized the ipod and it updated but now its doing the same thing again. dont nkow what the problem is? u guys think its the firewire?

Par deploy from IDE hangs and causes Portal to crash

Similar Messages

Maybe you are looking for