Paragraph Alignment Issue

This is probably a simple issue, but I just can't seem to figure it out.
I have a caption with two lines on all the photos, On one caption I need it to be three lines, but I want The line that is usually second to stay in the same place without moving down when i add a third line. Where do I need to put the breaks in to have the second line stay in place.
Gsld.net/civic2/index.html
Its the credits in the lower left. I need copyright to always be in the same place.
Thanks

Have you tried adding a div after div#slidecaption that contains the copyright info? You may have to give #slidecaption a fixed height.
I have also noticed that you have placed style rules outside of the <HEAD> element; not good.
Font-family: Candara????
You may also like to have a look here http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fgsld.net%2Fcivic2%2Findex.html

Similar Messages

Paragraph Alignment Issues

Okay I am a novice when it comes to using Indesign and am putting together a lengthy document that requires paragraph headers.
Im having some trouble adjusting the headers seperate from the body of the paragraph. The headers do not appear at the begining of every paragraph so I have been attempting to change the headers manually. My issue is with their alignment, I want my headers Align Left with the body Justified. When I change one line the alignment effects the whole paragraph. The only solution I can come up with is a hard return and then adjust the leading back to make the text tight again.
Any help is greatly appericated.

Id love to send you a screen shot but the text is for a legal document for a financial institution so ill just try and explain it here. The text reads like this:
Lorem ipsum dolor sit amet.
consectetur adipiscing elit. Nunc est augue, sagittis eu faucibus ut, euismod quis lectus. Mauris feugiat tellus id nulla eleifend elementum cursus tellus dignissim. Mauris eget mi lorem. Sed suscipit molestie mattis. Nam ac lectus quam. Aliquam dolor tortor, tincidunt ut tempor in, ultrices id ligula. Pellentesque tincidunt magna ut augue malesuada blandit. Nulla facilisi. Integer sed ligula vitae magna gravida consectetur.
Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Sed ultricies, massa sed feugiat tempus, quam quam tempor felis, id consectetur sapien nulla quis dolor. Donec interdum gravida libero, in tempor justo egestas sed. Mauris sit amet elit in tellus faucibus aliquam eu sit amet diam. Aliquam vitae purus tellus. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Cras varius justo id sem laoreet in venenatis velit gravida. Cras elit magna, sodales at scelerisque ac, molestie quis erat. Quisque aliquam, arcu nec tincidunt vulputate, neque enim adipiscing lacus, id posuere purus nibh vitae purus.
Proin dignissim bibendum risus in fringilla.
Ut justo justo, elementum varius auctor non, eleifend quis ante. Cras bibendum ullamcorper turpis, vitae feugiat purus ornare ac. Nam non purus a purus porta tempor. Sed convallis vehicula elit pretium vehicula. Morbi rhoncus placerat nisl, nec lobortis ligula rutrum id. Phasellus rhoncus metus fringilla elit dictum ultricies. Nulla a eros quis diam suscipit sodales eu ullamcorper lorem. Praesent aliquam urna et odio auctor hendrerit. Mauris rutrum erat id nibh aliquet et volutpat ante semper. Proin ultricies erat ac velit porta elementum consectetur et ante. Maecenas et dui eget enim vulputate scelerisque non quis orci. Vivamus pharetra blandit sapien a pharetra. Nulla eget magna vitae tortor imperdiet fringilla.
I placed the text from a word file and cannot get the headers of the paragraphs to align themselves to the left without it pulling the entire paragraph over. Hopefully this description helps
Thanks in advance.

Paragraph Alignment issues in version 5.1 (1769)

I have been having nothing but issues with using the Justify alignement setting in the newest version of pages 5.1. I can copy and paste the same text into pages 4.3 (1048) and can use this alignment feature no problem but in 5.1 I cannot get my text to justify. Anyone else have these issues at all?
Thank you.

What else do you have in the same line as the text?
Have you tried Paste and Match Style?
You could be copying over unknown formatting from wherever the text is coming from.
Peter

OBIEE 11g Calendar alignment issue

Facts: OBIEE 11g - 11.1.5 on Windows 2003 server.
There's an alignment issue going on with OBIEE calendar, wich happens only when the month is october. For all other months, the calendar is displayed properly. It does not depend on the year. You may change the year and select October, you'll get the error.
You might see what happens on the link below.
http://img210.imageshack.us/img210/7876/firefoxds.jpg
This behavior may occur when using IE9 (both using compatibility mode or not), Mozila Firefox and Google Chrome.
I've looked over Metalink and the forums and could not find any information about this error.
Any tips?!
Thanks!
Marcos
Edited by: BI_Creation on Dec 1, 2011 11:37 AM
Edited by: BI_Creation on Dec 1, 2011 11:40 AM

Hi there. Does anybody noticed this issue on calendars?! That only occurs when the month is october....
Just updating, the correct version of OBIEE is 11.1.1.5.0.
Thanks in advance.
Marcos

Is paragraph alignment possible in RH 6 HTML?

Hi all,
Most of the topics I've created include text boxes, tables, and screen shots - all of which I can set the size for best viewing. But so far I haven't been able to find a way to control the paragraph text so that it doesn't stretch beyond the boxes, tables, and images when accessing the help pages without the content pane (TOC) open or having to minimize the page size. I've tried using the margin ruler, the paragraph alignment, and the page setup function, but nothing seems to do the trick. What I'm aiming for is nicely alignment topic when opened as a single help page or as part of a manual w/TOC.
I'd appreciate your input. Thanks!

Hi there
You are probably looking for something RoboHelp doesn't help you with easily.
If you hand edit the HTML code, you can insert a DIV on the page to make it adhere to a specific width.
Basically the HTML *MAY* look something like this:
This may make the editor look a bit odd as things are now inside a dotted rectangle frame. But it should work.
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Paragraph Alignment question - is it possible with scripting?

Hello. I am working on a business card template that has a paragraph alignment problem. I have asked in other forums if it was possible, they pointed out that it might be, with scripting.
I need to know if it is, so I can dig further.
Here is the problem: I have a name and title on seperate line that need to be aligned to the right margin (the longest line touches the right margin) but centered above or below themselves. The text box is set to receive a large amount of characters. This is an automated system using InDesign Server so no manual adjustments are being made once the information has been submitted.
Is this possible?

Again, I don't know anything about ID Server, but you can try this. Label the text frame 'card' (select the frame, go to Window > Automation > Script label and enter a 'card' -- without the quotes).
try
   tf = app.activeDocument.textFrames.item ('card');
   p0 = tf.paragraphs[0];
   p1 = tf.paragraphs[1];
   p0.justification = Justification.rightAlign;
   p1.justification = Justification.rightAlign;
   p0left = p0.insertionPoints[0].horizontalOffset;
   p1left = p1.insertionPoints[0].horizontalOffset;
   if (p1left > p0left)
      p1.rightIndent = (p1left-p0left)/2
   else
      p0.rightIndent = (p0left-p1left)/2;
catch(_){}
This one doesn't rely on a selection.
Peter

More alignment issues

hi,
I'm hardly an expert - but I have made great strides because of helpful people who throw me a hint.
my site: www.kirarmerica.com
I still have JUST a FEW alignment issues. I like to have everything centered, so now I am just down to my spec sheets.
I know that they might not be configured ALL the same, but I am hoping I can change a few things
please look at Kira America | Products
click on any spec sheet and you will see that the headers menu and sometimes the footer stays centered, but the spec info jumps to the left of the page.
I've found the correct .css to edit. but I cant quite figure out how to align the columns vertically on the page.
for example if I put a margin on #right_column it put it in the right spot, but then the rest of the content jumps all over the page.
any hints would be helpful!

These changes will center content in white area
#container h1, #container h2, #container h3, #container h4, #container h5, #container h6 {
    border-bottom: 1px solid #DEDACB;
    padding-bottom: 8px;
    text-align: center;
.excel214 {
    border: medium none;
    color: #000000;
    font-family: Calibri,sans-serif;
    font-size: 11pt;
    font-style: normal;
    font-weight: 400;
margin-left: auto;
    margin-right: auto;
    padding-left: 1px;
    padding-right: 1px;
    padding-top: 1px;
    text-decoration: none;
    vertical-align: bottom;
    white-space: nowrap;

Paragraph Alignment and Justification different in Word 2003 and 2010

Hi all,
We are migrating some letter templates from word 2003 to word 2010 for our system and we found a alignment problem in word 2010 (actually, it is not a problem and I think the behavior in 2010 is correct)
In word 2003, the following paragraph alignment will display like this :
"To enjoy your membership in our service center, please remit a payment of US$
123456789.00 per annual"
In word 2010, the following paragraph alignment will show like this
"To enjoy your membership in our service center, please remit a payment of
US$ 123456789.00 per annual"
(US$ 123456789.00 is shown on same line in 2010 but US$ and dollar amount are not
on the same line in 2003)
Although I think the paragraph alignment in 2010 is more reasonable, I still want to achieve back
the look in 2003 such that we can easily to compare results.
As in one post that I asked help in this forum, one expert shows me that there is option to set back the layout
look behavior in 2003, I guess if there are some advance settings to achieve this?
Please kindly advise to me on this.
Thanks in advance for your help,
Ray

There is a difference, but it turns out to be a "2-factor" one. As far as I can tell, "enabling an 'east asian' language for editing" is the other factor. When you create
a document with such a language enabled, wrapping of currency amounts works differently in Windows Word 2007 and later. Once created, the problem seems to occur even on copies of Word that only have (say) English enabled.
In Word 2003, having such a language enabled for editing appears to make no difference.
Whether "enabling of an 'east asian' language is the cause of the problem described by the OP, or the only thing that will result in such a difference, I cannot tell.
Here, I tested roughly as follows:
a. back up normal.dot/normal.dotm
a. open Word 2010 and ensure only English is enabled as an editing language
b. create a new document
c. Type
" $ a"
(space, $, 10 spaces, "a", no quotation marks).
d. Type text + spaces before that, until the "a" wraps onto the next line.
e. save and close that
f. enable (say) one of the Chinese languages for editing.
g. restart Word
h. repeat (b)-(d). This time, I think you will see that the $, 10 spaces and the "a" wrap as a unit.
i. Save that.
j. disable the East Asian language again and restart Word. Open each document and see how the wrapping behaves.
Here, I happen to have Chinese enabled as one of the editing languages in my copy of Word 2003 and I do not see the "wrap as a unit" behaviour in that case, or in either
of the two .doc fiels saved from Word 2010.
Here, the behaviour appeared to be the same whether I used $, £ (UK pound sign) or the Yen character symbol, but not the Euro currency symbol.
I saved my test files (including some created in Word 2003) in 2007 XML format and tried to pin down the significant difference. Per-dcoument compatibility settings
didn't seem to be involved. Changing the w:eastAsia language attribute in the following element in the styles.xml file was enough to change the behaviour:
<w:styles><w:docDefaults><w:rPrDefault><w:rPr><w:lang ...
Peter Jamieson

Alignment issues in my smartform

Hi Gurus,
I am facing alignment issues in my smartform .
My Output with LP01differs from that of Logica Printer LOCAL.Kindly throw some light on the same.
Deepak

Hello,
Please check with the basis that FONT that you are using are installed in both the printers.
This situation happens most when you have imported a new font into SAP system, as a printer is not configured for that Font output differs.
Thanks,
Jayant

SAP script printout alignment issue

Hi Experts,
I have facing one Script Printout Alignment issue.
SAP Script Form printing some Values in Table format.
While debugging( in debug mode ), I am getting the correct Alignment ( Proper table format with values ).
But in printout the Alignment( The vertical and horizontal lines are not printed properly ) is not correct.
Thanks in Advance.

HI Glen Anthony,
I am not using any printer details.
from the Spol (SP01) I am checking the print priview.
Success in debug mode but not in Print.
Please suggest.
Thanks

Alignment Issues between dreamweaver and browser

Hi
Hoping someone can help, i'm trying to learn how to make
better sites with advanced tools like apDIV's but seem to be
running into an alignment issue. When I make the html file in
dreamweaver I seem to have to off set the images and div tags
inorder for the site to show up aligned properly in firefox,
explorer, etc. I'm thinking there might be a problem in the actual
code causing this but am not good enough yet to find it or the
problem, any ideas or guidence would be greatly accepted. below if
the links work is the difference I see between dreamweaver and when
its launched in a browser.
DreamweaverScreen
BrowserScreen

> over a centered frame
You are not using frames - that's a table.
Yes - there's a way to do this, but it will involve your
working in code.
Make your page left aligned by removing any centering.
Then position your layer so that it is properly located over
the table.
Change this -
</head>
to this -
<style type="text/css">
#wrapper { width:760px; margin:0 auto;position:relative; }
/* 760px will display on an 800px screen maximized browser
window without */
/* horizontal scrollbars. */
</style>
</head>
(you may need to adjust this width so that it's consistent
with the width of
your centering table)
change this -
<body ...>
(the ellipsis represents any other attributes that might be
mentioned in the
body tag, and SHOULD NOT BE INCLUDED EXPLICITLY!)
to this -
<body ...>
<div id="wrapper">
and this -
</body>
to this -

</div>
</body>
and see if that helps.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Vinx21" <[email protected]> wrote in
message
news:ge9t3e$92s$[email protected]..
> thanks for the help osgood, I see now what my problem is
and am just
> wondered
> if there was a way to place the absolute layer over top,
in the right
> position,
or will have i have to remake one of the elements a
> different way???
>
> thanks again, dave
>

Paragraph style issue when opening imdl (CS5) file in CS4

Sending a CS5 file to a printer using CS4. When they open the imdl file in CS4, it changes the paragraph style in the pull quotes. The initial character, whether a letter or a quote, appears tiny. It looks like a paragraph style issue. The 'quote' paragraph style in CS4 has a drop cap set on it.
Has anyone else had this problem or have a suggested fix? Certainly, we can check our files in CS4 before sending each time, but what a pain!

IDML is meant as an interchange format, and is far from "the same file but in another version".
If your printer wants a CS4 file, send them a CS4 file. Better yet, ask them why you have to send them native files anyway and what's their problem with a PDF?

Alignement issue when exporting to PDF

Hello,
I'm having some alignment issues when exporting an InDesign file to PDF.
I have a couple of square pictures, touching eachother at the edges. These are aligned bang on in InDesign (the lines overlap), but when exporting to a PDF and viewing in there, it seems that some seem to jump up slightly.
Is this just a display issue or a setting issue when exporting to PDF?
Thanks
Benny

The detail is cropped too tight for me to tell how many photos are intersecting there. Is there a vertical intersection as well? If not, I think you're looking at a very slightly non-rectangular frame, if there is, then you might still be looking at a non-rectangular frame, or the frames are not perfectly aligned, which doesn't surprise me if you snapped to a guide -- I find that less than 100% reliable since CS6.
Presuming that you've zoomed in to show us the problem, that's probably a single pixel misalignment and you'd be very hard pressed to see it in printed output without a loupe.
You can check the bottom edge of the top photo, and the top edge of the bottom photo(s) for being out of horizontal by using the direct select tool to select the corner points and seeing if the y-coordinate is the same on both sides of the frame.
My printer tell me to always overlap frames, rather than butting them, for trapping, for what that's worth, but I don't always do what he says, and I've never had a problem.

CS5 HDR pro two photos alignment issue

Although I really enjoy the new tool, I'm having trouble aligning two photograph when I open then through the HDR pro tool.
Why is alignment of two photos so bad in HDR pro and perfect if you align the two same photos as two layers? I've even tried reopening the same files over and over and get different results each time in HDR pro.
In view of this, shouldn't there be a realign button in the slider adjustment screen, or options for alignment, such as Use the regular auto-align?
Since alignment works fine with layers, is it possible to have an option to use layers as a starting point for HDR pro instead of opening saved photos only? I realize this probably might not give perfect results as just fixing the automatic alignment issue...
But hey, I'm just trying to find a workflow around this if I didn't have my tripod with me at time of shoot... and I shot only two photos to composite.

Hi Chris,
thanks for looking into this matter. Where do you want me to send the files (over 50 megs zipped).. they're CR2 files...
Date: Fri, 28 May 2010 14:38:51 -0600
From: [email protected]
To: [email protected]
Subject: CS5 HDR pro two photos alignment issue
Don't know what could be going wrong. Can we get the files so we can try to reproduce the problem here at Adobe?
>

Colour alignment issues with CP1515n

I'm having some colour alignment issues with my Color Laserjet CP1515n. Lately, I've noticed that the 3 colours go out of alignment from the middle towards the right of my printouts. Alignment at the left towards the middle half of the page is ok but gets progressively worse towards the right side of the page.
Nothing in the user interface allows me to reset the colour alignment. What can be the cause of this and what's the remedy? This printer is slightly over a year old and has only just gone through its first set of toner cartridges.

I am also having alignment issues to the same nature as the post below. I have just replaced the Black, Magenta and Cyan toners. After doing this the alignment goes out of register from left to right (left edge fits right edge all colours are out of fit by 2mm).
I have also found nothing in any manuals as to how to adjust or fix this problem. This is the second time I have replaced these colours. I have re-calibrated and taken the cartridges out several times but it is still the same.
Any advise would be helpful. As it is at the moment the printer is unusable for my job and it's the only one I have.

Paragraph Alignment Issue

Similar Messages

Maybe you are looking for