Paragraph format and character format in script

hi expects,
what is the difference between paragraph format and character format in script?

Hi Rohit,
Paragraph formats control the formatting of paragraphs in SAPscript whereas Character formats are used for text formatting within paragraphs.
Character formats will have Standard attributes like Bold, Italic, Underline, Font family, Font size etc.
Paragraph formats will standard attributes of Character formats and in addition to this, they will margins, Indents, tabs, Alignments, Line spacing and delimeters.
Check this link for Paragraph formats
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802e02454211d189710000e8322d00/content.htm
Check this link for Character formats
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802e43454211d189710000e8322d00/content.htm
Thanks,
Vinay

Similar Messages

Reg paragraph formant and character format

Hi All,
How to assign particular paragraph formant and character formant for a particular text node that I have created.I know how to create paragraph formats and characters using smartstyles and also I assigned this smartstyle in my smartform to that particular text node,but I am not getting where do I select the paragraph format and character format to assign it to the text node?could you please suggest some body how to do this?
Regards
Mahesh

Select the text you have written in the created text element and on top of the text only there is an option for Paragraph and character formats which will give you the dropdown list with all the paragraphs and character formats u have created. choose the desired one and it will reflect..
OR alternately you can go to the editor and wite the code as in SAP SCRIPTS by providing the Paragraph name or Character name urself.
REWARD POINTS IF USEFUL

Smartforms/Smartstyle How to create/upload paragraph and character formats

Hi Folks,
I am working on a demo IDES system. In my ECC 6.0 system, the paragraph formats were not included. How can import or include or create or upload paragraph and character formats in order to create smartforms and smartstyles.
Waiting for your answer................
Thanks,
Creasy Matt

If you Ran Smartstyles T-code and from Utilities you should got all information how to do all these activities.

About paragraph and character format

If You define paragraph and character formats what will be overwriting which
           one?

If you ude both chatacter and paragraph format to print a variable... character format will override paragraph format.
Ex, AS --> Paragraph format   Font size 10 Font family : HELVE
      CH --> character format    Font size 8
Now, PS <CH> HELLO </>
It will be of font family of HELVE and with font size of 8.
I hope it is clear for you now.
Regards,
SaiRam

Difference between deploying oracle report in RDF format and REP format

Hi All,
Good Day!!!
We are frequently encountering report failures in our production environment with the error message "REP-1247: There exist uncompiled program unit(s)"
But the report executes successfully in the next try and the issue is intermittant. In production the reports are deployed in RDF format.
So in our test environment we tried of deploying the reports in REP foramat and we cant find any errors.
Is there Difference in deploying oracle report in RDF format and REP format?
Is there any diffence in execution?
Your inputs will be much appreciated!!!
Thanks in Advance,
JK

Hi,
REP is to RDF what FMX is to FMB, MMX is to MMB, etc.
Only difference here is that if you deploy RDF, not REP, then the RDF is compiled at runtime by Reports Engine and then executed. In other words, if REP is deployed then it is straightway execute.
That should explain all your observations.
Cheers.
PS: Please post Oracle Report queries on {forum:id=84} forum.
Edited by: Prabodh on Jul 20, 2012 4:54 PM

Why do units of measurement in paragraph tab and character tab differ?

Why do units of measurement in paragraph tab and character tab differ?
In Indesign CC 2014.1 when I set the units for type to be in points and all other measurements apart from strokes to be in mm, why are the units for the paragraph tab also in mm?
In both Photoshop CC and Illustrator CC, whatever units you assign for type also are used for the paragraph settings, which makes sense.
I want everything to do with type to be in points and pretty much everything else in mm, yet the only way I can have the paragraph tab units as points is for all measurements to be in points!
Does this sound right or is something wrong with my Indesign?
Thanks
Keith

Glu Design wrote:
Ok guys I see. I just wondered why InDesign differed to both Photoshop and Illustrator in this respect.
Thanks
Keith
They are made by Adobe, and Adobe has different teams for different applications.
Sometimes the same feature in multiple applications is designed slightly differently than the way other teams would handle it.
This may be down to:
Time constraints to get the feature in - compared to other top priority items
Having to make a decision on whether to do it one way or another way - 50/50 type thing
Due to the limitations of how the program was designed and how the feature ties in with other features etc.
And many many more programming reasons. It may be the guy doing the photoshop changes wasn't as well versed in typography needs as the indesign guy.
Who knows - but there are differences in lots of areas between all apps.

List all of the existing column and there column format and data format?

Hello Gurus,
I am new to OBIEE and i have a requirement to verify the column format and data format for all of the existing column while generating a analysis report. Is there any way i can list down all of the columns which are exposed and list there column format and data format?
For checking the individual column properties i know there is an option called 'Column Properties' but want to know all in once go.
Kindly help me and thanks in advance.
Thanks

I don't think you have anything in answers to get that, Go to Repository and Utilities -> Generate Metadata Dictionary that will give columns and datatype.
Award points if it helps
~Srix

Problem with paragraph style overrides and character formatting

I've had this problem for a long time, and sometimes it resolves itself, sometimes it doesn't. Finally I'm begging for help.
I am typesetting academic articles into a journal. We use endnotes. The endnotes have both italic and regular formatting--italics for book and journal titles, and foreign phrases.
Sometimes when I place the text, the formatting reverts to whatever it was in Word. To try to fix that, I've begun stripping the Word formatting from the original document, making everything "Courier New" and just importing it like that. I figured this would clear a lot of the problems I've had with fiddly formatting issues.
I was mistaken.
Here is what happens:
When I place the document it comes up in the original Courier New font, with italics and other formatting intact. If I click "article style" which is the main article paragraph style format, normally it changes. but if I right click and select "apply article style" it is more likely to change the paragraph to the proper style, with italics and other formatting still intact.
But when it gets to endnotes, I'm sort of screwed.
My endnotes style is a bulletted style, so that I can have the endnote numbers consistent. but this seems to screw all the style formatting.
Here is what I do:
With the cursor in endnote text, I click "bulleted endnote style". The character format remains the same, with a + beside the style. The endnote number format is different, however. If I click "clear overrides" it does in fact change to the proper formatting, but it strips any italics or other character in the text. This is frustrating because many of these endnotes have lots of italicized journal and book titles, and it takes a long time to figure out which ones I need to reitalicize manually.
I have tried to use the "customize style import>Style mapping" but it has not fixed anything.
Please help me figure out how to make these transitions more smoothly. I am open to suggestions both on how to make the changes once the document is placed in the Indesign file, and also making modifications to formats in the native Word file so that I don't have these problems.
Thanks
Dan

Sorry, that last message wasn't supposed to send (if that's not obvious!). I was writing it and got interrupted. Damn iphone.
I know why there are two numbers. This is not an issue. What I didn't finish writing was that, the note number before i bullet it is a different font/ format. Again, not a problem. Here is something interesting, though. If I delete that original number by placing the cursor in the middle of it (say a between the 4 and 2 of 42) then delete everything by Shift+arrow forward, press delete then delete the rest of the unnecessary characters, THEN apply the style formatting, it works just fine. Is it something to do with the character codes of those original note numbers?
Word drops in so many hidden codes that it screws everything up!

Date format and number format- need help

Hi everyone,
I'm working with JDeveloper10.1.2, struts and uix pages.
I have 2 problems:
1 - I have a field of type date in my uix page and the format is like this='24-Jun-2006', but I need to change this format to be '2006/06/24'.
2 - I have an attribute of type number(salary) and when I drag and drop this attribute from the DataControl Pallete and run the project, in the uix page I see a number, for example: salary = '123456', but I should see salary = '123.456,00'.
And when I write, for example '123.456,00', when I commit this value, I should see in my DataBase something like this '123456,00'.
I alredy tried to change the attribute properties in the Entity Object but without success. :(
Can anyone help me with this problems?
Thanks,
Atena
Message was edited by:
Atena

nd when I write, for example '123.456,00', when I
commit this value, I should see in my DataBase
something like this '123456,00'.Sorry I replied before thinking about the problem. You will not see the value in the db as such, the db will show the values differently depending on the session settings.
The values will only show up as such in the form. To see them such in the db do:
alter session set nls_date_format='yyyy.mm.dd'
for the date and
alter session set nld_number_format='0.00'
for the number

Date Formatting and SSN Formatting from BIP Report

Hello,
I found out how to format phone numbers.
I just need help in formatting 2 fields from our report.
1. The Call Date (MM/DD/YYYY HH:MM:SS AM/PM)
2. SSN (123-45-6789)
First, I am using the command below to convert the date into canonical format after the namespace:psfn.
<?psfn:totext(ssWarrantyUpdatedDt, 'YYYY-MM-DDTHH:MI:SS')?>
I then tried formatting the date using the Microsoft Format Mask definitions but it didn't work.
On the SSN, I didn't see anything from the bookshelf that shows me how to do this formatting.
Can anyone please help me?
Thank you

Hi,
If you XML data is coming from Oracle Report (RDF), why dont you do date and SSN formatting in SQL itself. So that you will get directly the required format in XML. That is how I am doing in my report. Most of the time it is easy to make changes in Oracle Report SQL rather than in template bcoz BI publisher dont support so many MS Word properties.
Thanks,
Omkar

How to add Audio Formats and Video Formats in one movie?

Now that FCP X will not allow different settings how would I change the Audio Format and the Video Format to one movie in Compressor 4?
When I change the Audio to ACC I have a sound file and when I change the Video Format to HD 720 I get the movie but with the original sound.
Any help is always appreciated.

Sorry for this one also. Just finally searched the Inspector windoe in Compressor 4. It is already there.

What is the difference between mp3 format and mp4a format?

I downloaded all my cds and the files are in mp4a format. This seems to be the default.
Is there any difference between this format and mp3?
Will I have problems in the future playing my music?
Will I have to download my cds again in mp3 formatr?
Please help!
Pat
PC Windows XP

Both are a Lossy compression.
You lose some of the information when you convert to this format from the original.
Both are very close to the same size when converted at the same bit rate.
A file converted to MP4 at 128 kbps will sound at least as good as the same file converted to MP3 at 160 kbps. This results in smaller file sizes with better quality.
Will I have problems in the future playing my music?
Probably not. Depends on what you want to play them on.
Will I have to download my cds again in mp3 format?
Again, it depends on what you want to play them on.
If you are using something which will not read MP4 you may want to convert them.

List of Number format and Date format according to the Locales

Hallo everyone.
I am searching for a list or document which includes the number and date formats according to the country locales. Where can I find sort of document?
Another question: Where can I find the all parameters of swing.properties file?

"Date - allows the user to enter a date as a parameter. Note that the data type must also be "Date" and the format must be Java date format."
Page 4-9, Adding Parameters and Lists of Values
Oracle® Business Intelligence Publisher
Report Designer's Guide
Release 10.1.3.4
Part No. E12187-01

Differences between Internal Format and External Format

Hi experts,
When I was importing master data from InfoObject in BW, there's an option selection in the screen of Data Manager. Its name is Choose format and two selectable options are:
1. Internal Format
2. External Format
I looked into help of BPC and it says:
Choose the Format
Note:
The External Format calls the Output conversion routine of the InfoObject.
The Internal Format does not call the Output conversion routine.
I'm not sure what is Output conversion routine of the InfoObject. Could you help me to understand it?
Thanks,
Tony

Hi Tony,
In BPC Data Manager, you will find Conversions, in that you will find
External and Internal formats. This means if you are importing a flat file where in
Example your date format in that file is 31-10-2009, but our Internal format (BPC format)
will not accept it. Our internal format is 2009.OCT. So accordingly you have to
mention that. It may be for any dimension like Accounts, Product and so on.......
I hope this may help you.
Raghu B.S.

Help regarindg country formatting and printer formatting in scripts

Hi all,
I'm facing a problem printing the address in SAPscript. Though we try to display the field T005-LAND1 within Address -endadress, the field T005T-LANDX50 gets displayed.
For example- when we want to display countrycode as NL(netherlands), only 'Kingdom of the Netherlands' is diplayed.
i believe this is because of the Country format used in the adress. Is there anyway we can change the country formating.
Also the output gets different alignment when we use differnt printers for preview. is there anyway to overcome this?
Your replies will be very helpful and thanks in advance.

hi,
this is quite natural that ur print preview and print out differs and it differs from printer to printer.so, u have to define the paper size correctly and check if possible the type of printer they will be usually using.
here in ur case r u trying to pring the country key or country name.
in fact u have to pick the country key and print the country name in that place by getting the name from check table.

Paragraph format and character format in script

Similar Messages

Maybe you are looking for