Paragraph styles dialogue is empty. I'm unable to load or create new styles and have them show up.

I've used paragraph styles in Indesign CS4 since 2009 and yesterday (6-10-14) I noticed the paragraph styles dialogue was empty. I figured somehow I must have accidentally deleted or cleared them. I then proceeded to attempt loading them from another document. After "Loading Paragraph Styles..." via the drop-down in the upper right corner of the dialogue box nothing showed up.
I then proceeded to create a new style it to never appeared in the list—it remains empty.
Any ideas?

Delete InDesign’s preferences.
Troubleshooting 101: Replace, or "trash" your InDesign preferences

Similar Messages

I created an album and have been showing it presentation style, ken burns effects etc. Now every time I try to re-run it it starts from the end, last picture first! Can't seem to be able to reverse it. Any clue anyone?

I created an album and have been showing it presentation style, ken burns effects etc. Now every time I try to re-run it it starts from the end, last picture first! Can't seem to be able to reverse it. Any clue anyone?

First try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion, Mt. Lion or Mavericks delete the contents the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto, reset iPhoto's preferences and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
Next, if necessary, continue with the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Unable to install Adobe Photoshop Elements 13, from disc. The disc is rejected in DVD RW drive, no dialogue box comes up. The DVD driver is up to date and have updated flash player.

Unable to install Adobe Photoshop Elements 13, from disc. The disc is rejected in DVD RW drive, no dialogue box comes up. The DVD driver is up to date and have updated flash player.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes. I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge. Help?

When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes. I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge. Help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have a mac computer 3.2 Ghz intel core i3 with memory 4GB 1333 MHz DDR3, I have recently purchased an new macbook and have yosemite software and iCloud . I can no longer us my mac to open up recent numbers documents from my macbook. I am unabl

I have a mac computer 3.2 Ghz intel core i3 with memory 4GB 1333 MHz DDR3, I have recently purchased an new macbook and have yosemite software and iCloud . I can no longer us my mac to open up recent numbers documents from my macbook. I am unable to upgrade to allow me to get the current numbers version on my mac. What do I need to do to get all my machines woking in harmony again

On each machine turn on iCloud and sync all the available apps. Apple explains how to set up iCloud in http://www.apple.com/icloud/setup/
After doing this run software update on each machine and install all the suggested updates. If you still need help installing the most up-to-date versions of iLife and iWorks open the Mac App Store - click the Purchased tab and update all that need to be updated.

Restrict create new style option?

Hello,
Is there a way I can restrict users creating new style names in the "customize" -> "style" tab?
In my case, users can create new name for my styles, but can't change them. I don't them to create new names. These new names make the style dropdown goes longer. Any ideas?
Thanks,
-Dong Chen

Go to the Builder Page > Administer tab.
Use the "Portal User Profile" or "Portal Group Profile" portlets to edit the specific user, or group of users, and then go to the Privileges tab of the portlet.
Here you will see the privileges and Style is one of them ... change to "View" . I think "authenticated users" group gets create privilege on styles by default.
Hope this helps,
Candace

Creating new Styles for a Blog connection

Hi -
I've just started using Contribute CS4 to make a Wordpress blog (hosted by Wordpress for now).
I'd like to be able to create some new CSS or inline styles and reuse them appropriately throughout the blog's various entries, pages, etc, but I don't have an option to create a new Style anywhere that I can find.
Looking through help files and forums, I've seen multiple references to setting up user permissions properly (I'm Admin on my own machine), but these all seem to link through Edit -> Administer Websites (which is blank for me, I'm not creating a website). Under Blog connections I've enabled all the tick boxes for Styles, and made sure "Don't allow..." isn't selected.
Does anyone know how I get to add new styles please?
Thanks in advance,
-inedria.

You might consider looking/asking in the LabVIEW for LEGO Mindstorms Forum (look down on the list of Forums) -- I, for one, had no idea what EV3 was!
BS

Unable to load PSE 10 disks 2 and 3 of 3

I purchased PSE 3 from Costco and successfully installed the first disc. I was unable to install disc 2 and therefore, disc 3. When I tried to install the second disc, I received this message: : "The installation package is not supported by the processor type. Contact your product vendor." I emailed Costco with all of the information and got this reply: "Please contact the technical support for that software listed in your literature as there may be a setting somewhere that needs to be adjusted. This software should run on the computer with the specifications listed."
I have XP Professional with service pack 3 Pentium (R) 4 CPU 3.2 GHz 2.49 GB RAM
I also have PSE 9 and never had any problems with it. Can anyone help with this?

If disk 1 installed properly, you're done. Disk 3 is the mac version. In my combined PSE/PRE 5 disc set, disc 2 is for 64 bit operating systems.

SIM Error - Unable to find screen - Create Item Ticket and Signer error

Hi,
When I bring up the SIM application from Eclipse, everything works normally.
But I navigate to ITEM TICKET SCREEN, and here when i click on Create , to create an Item Ticket,
ideally It should open the Item Ticket Detail Screen,
instead it throws an error,
2013-01-14 11:30:16,855 ERROR [AWT-EventQueue-1][application.NavigationManager] Unable to find screen: oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen
and the screen is not opened, it just maintains the current screen which is ITEM TICKET LIST SCREEN,
but this is present in Navigation.xml screen and then i am able to find it in one for the project folders,
Any idea why exactly I am getting this issue, any way to make it work fine.
it was working sometime back, and i dont think any change regarding this has been made.
sim version :13.2
in a totally un-realted scenario (that's what I think, there is one more class "NEWRetailItemSearchProcessor", for this I get an exception,
signer information does not match signer information of other classes in the same package
I have two questions,
1. Is it because of the signer Issue, I am getting the other error -"*Unable to find screen: oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen*"
2. How do I resolve the signer issue,
it says,
class "oracle.retail.sim.closed.simclient.editor.NEWRetailItemSearchProcessor"'s signer information does not match signer information of other classes in the same package
but in this package "oracle.retail.sim.closed.simclient.editor" -- there is no other class except the one mentioned NEWRetailItemSearchProcessor
2013-01-14 11:30:16,855 ERROR [AWT-EventQueue-1][application.NavigationManager] Unable to find screen: oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen
2013-01-14 11:30:16,855 ERROR [AWT-EventQueue-1][application.NavigationManager] java.lang.SecurityException: class "oracle.retail.sim.closed.simclient.editor.NEWRetailItemSearchProcessor"'s signer information does not match signer information of other classes in the same package
 at java.lang.ClassLoader.checkCerts(ClassLoader.java:776)
 at java.lang.ClassLoader.preDefineClass(ClassLoader.java:488)
 at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
 at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
 at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
 at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
 at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
 at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
 at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
 at oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailPanel.initializeScreen(ItemTicketDetailPanel.java:136)
 at oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailPanel.<init>(ItemTicketDetailPanel.java:116)
 at oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen.<init>(ItemTicketDetailScreen.java:16)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
 at java.lang.Class.newInstance0(Class.java:350)
 at java.lang.Class.newInstance(Class.java:303)
 at oracle.retail.sim.closed.application.NavigationManager.createScreen(NavigationManager.java:166)
 at oracle.retail.sim.closed.application.NavigationManager.startScreen(NavigationManager.java:183)
 at oracle.retail.sim.closed.application.NavigationManager.navigate(NavigationManager.java:78)
 at oracle.retail.sim.closed.application.SimplifiedApplicationFrame.navigate(SimplifiedApplicationFrame.java:221)
 at oracle.retail.sim.closed.application.SimplifiedApplicationFrame.actionPerformed(SimplifiedApplicationFrame.java:211)
 at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
 at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
 at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
 at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
 at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
 at java.awt.Component.processMouseEvent(Component.java:5517)
 at javax.swing.JComponent.processMouseEvent(JComponent.java:3129)
 at java.awt.Component.processEvent(Component.java:5282)
 at java.awt.Container.processEvent(Container.java:1966)
 at java.awt.Component.dispatchEventImpl(Component.java:3984)
 at java.awt.Container.dispatchEventImpl(Container.java:2024)
 at java.awt.Component.dispatchEvent(Component.java:3819)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
 at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
 at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
 at java.awt.Container.dispatchEventImpl(Container.java:2010)
 at java.awt.Window.dispatchEventImpl(Window.java:1791)
 at java.awt.Component.dispatchEvent(Component.java:3819)
 at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
 at oracle.retail.sim.closed.swing.event.HotKeyEventQueue.dispatchEvent(HotKeyEventQueue.java:34)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
 at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
 at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Edited by: 924506 on 14 Jan, 2013 3:53 AM

to fix the signer issue
1) open the jar which contains required class file( i mean the one which gets called when u click on item tick button)
in winrar software
2) and remove below files
manifest.mf and mykey.sf or somthing.sf
then resign your jar and deploy it.
i hop this would work fine.
some time what happen when we sign the jar it does not removes old sign instead removing it enter one more entry in that file
hence it has two entry.
its better to follow above steps.

Unable to load CS4 to new iMac

I purchased CS4 from Adobe a few days ago and followed the instructions to load to a new iMac (OS 10.5 4GB Ram) which is a couple of weeks old. This is the first software I have attempted to load onto it. After trying twice and getting an error message both times 'some of the application components are missing please re-install the application' I contacted tech support at Adobe who walked me through uninstalling and re-installing. The program appeared to install but the error message came back and now the program is not loading at all. Tech support said they would call me back but I am still waiting many hours later.
I had many years with PCs but this is my first iMac and I am unsure if the error is with the Mac or the software.I would be grateful for any advice as I am totally lost.

Gotta say Ann, that sounds an absolutely dreadful solution to your problem, you had to install a DEMO version?!! WHAT!!! seriously?!
Ya know, with Adobe (and many other software providers) it's kind of like if you bought a brand new car from a car dealership but the driver door had a seal across it saying on it "if you break this seal you agree to the terms and conditions that said manufacturer are imposing", you then break the seal (cos you have to to get in) and then drive the car out of the showroom only to find that on the first turn of the wheel the wheel comes off in your hands, you then go to the dealers and say, "hey, this car isn't working properly, it's rubbish", to which they say "yeah but you agreed to the terms and conditions so it's your problem, but hey, as we're feeling kind we have some sticky tape in the showroom, we'll tape it back on again for you"
This ain't good enough Adobe, somebody SERIOUSLY needs to look into the licensing issues with software manufacturers, you couldn't get away with this junk anywhere else in industry, so why so for software???!!!
Either Adobe should produce rock solid software or they shouldn't produce software at all.

I have just updated Photoshop Elements from 12.0 to 12.1 and I am now unable to drag layers from one file and drop them into another. Help!

I was able to do this until I updated. I need help fast as I need this feature to complete daily tasks for my job. I've come to a halt with my work because of this.
I have the two files open as shown below. I'm trying to insert the image in the file on the left to the file on the right but when I drag to drop into the file, it doesn't happen.
The cursor indicates it has picked up the image but it doesn't indicate that it can't be dropped, it just doesn't work. Help!!

Given that you're on XP, we'd better try the following document:
iTunes displays -50 error message when syncing iPod on Windows XP

Unable to load sites such as Google and Facebook

Trying to determine if it's my MacBook or perhaps the ISP, Quest. Google and Facebook will not load, but sites such as Yahoo or ESPN load fine. Any ideas?

Try clearing you browser cache,cookies and history then try

Update 3.615 unable to load; says to close firefox and try again but not versions are on.

do I need to uninstall upgrade and if so how do i do that?

Sounds like a "hang at exit" problem. There are several possible causes for that error. See:
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
* What may cause Firefox to hang at exit
** http://support.mozilla.com/en-US/kb/Firefox+hangs (see "Hang at exit" section)
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: http://support.mozilla.com/en-US/kb/Safe+Mode
**Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
** See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting

Error: 1002097 Unable to load database in Essbase 11.1.2.2

Hi All,
I am getting error like Error: 1002097 Unable to load database when I tried to load an application using MAxl. We have installed 11.1.2.2 version newly and till yester all the process was working fine. I was able to run some automation batch scripts on the essbase application. Sudden Application stops responding. I am able to load the sample application which are come with the essbase. But, only my test application is not working fine.
I have tried Essbase server restart. But, no luck. Could any one suggest what might be the reason and how to debug.
Thanks
Sri

Hi Sri,
Please look into the below forum.. Hope it might help you...
Ref: https://kr.forums.oracle.com/forums/thread.jspa?threadID=874484
Sol 2:
Ref: http://www.network54.com/Forum/58296/thread/1185858760/Unable+to+Load+Database
The best solution I have found so far is to stop the application and delete or rename all .ind, .pag, .esm and .tct files for the troubled database and restart the application.
It will create these files from scratch and you can load your data.
Note: Please take the necessary backup before trying..
Thanks

Unable to load purchases to iPod

Unable to load purchases to iPod. I have 4 movies purchased. In iTunes, the movies are there. each movie has a small blue dot to the left of the check box, what is that?
I have iTunes to sync manually to the iPod, but still the movies will not load tot he iPod. Even when I apply setting, nothing transfers.
Since I had a hard time finding this, can someone (anyone) please e-mail me at: [email protected]
PLEASE HELP

Do you get an error message when trying to add the movies to your ipod?
You might try de-authorizing and reauthorizing your computer.
Then sync your ipod again.
Something else to try is to rebuild your itunes library.
This article might help.
http://docs.info.apple.com/article.html?artnum=93313
If the purchased videos still will not transfer to your ipod you can go into your itunes store account and view your purchase history. here you can report a problem with the videos purchased.

Paragraph styles dialogue is empty. I'm unable to load or create new styles and have them show up.

Similar Messages

Maybe you are looking for