Paragraphs Spanning Pages Not Converting

Hi all - Looking for some help please!
Using Acrobat Standard 9.1.1 to convert an MS Word 2002 (SP3) document running on Windows XP Pro SP2
Number/bullet lists items which break across two pages will not convert the second portion of the list-item which starts on the second page - it appears as simply blank. If a draw a box or some other object over that portion of the list-item that the object will convert just fine. If I break the paragraph by adding a line-break it will then convert fine too. But, it's not reasonable to doctor all of my documents this way.
I have tried the "Repair Acrobat Intallation" feature in the Help menu and I believe I have all updates installed.
I have attached two jpeg files which illustrate this issue.
Any suggestions would be greatly appreciated.
Thanks!
Trip

RESOLUTION:
By eidting many variables under EDIT -> PREFERENCES -> CONVERT TO PDF -> MICROSOFT OFFICE WORD -> EDIT SETTINGS
I found that the setting to "Enable accessibility and reflow" was causing the issue. By disabling this option all items in number-lists and bullet lists printed properly. I also noticed that this issue only ocured when the number list became two or three levels deep (i.e. 1... 1.01.... (a)....).
I hope this helps!
Trip

Similar Messages

Is it true that keep options is not working with paragraph span? (CS5)

Hi all,
Just wanted to confiem that keep options does not work with Paragraph span.
thanks,
shlomit

That's correct for now. Perhaps in CS6....

How do I get rid of the blank space after one paragraph and before the next paragraph startsin Pages '09? I understand that I should not have a page break mid paragraph but that is what I want.

How do I get rid of the blank space after one paragraph and before the next paragraph startsin Pages '09? I understand that I should not have a page break mid paragraph but that is what I want.

Hi stephanie,
These are unrelated questions/statements.
Space before and space after a paragraph are controled in the Text Inspector, as you've found out.
Pages will create a page break whenever there is no room for another line on the page. That break can come anywhere in a paragraph.
You may be thinking of Widow and Orphan prevention, and the other Pagination controls, found under the More button in the Text Inspector. (If that's what you found, then thanks for the refresher! I hadn't been to that pane for awhile, and had forgotten the variety of pagination controls available.
Regards,
Barry

Convert web page to adobe pdf can not convert greek characters

Convert web page to adobe pdf can not convert greek characters. How to solve it?

Convert web page to adobe pdf can not convert greek characters. How to solve it?

Table cell spanning pages

Hi all,
I'm having a rather major problem with Pages. I've managed to convince my sister-in-law to buy an iBook and star using Pages for her school work, however we've encountered a particularily difficult problem:
Pages (and AppleWorks) does not allow her to use table cells that span more than one page! Not only is this a problem because she has whole load of old MSWord documents that she needs to read, but she definitely needs to continue working like this. First because it's the only sensible thing to do, second because her teachers require her to.
Here's the problem: She creates a table, 2x8 cells (for example). In the rightmost column she generally writes quite a lot of text, often so much that it does not fit inside a cell that is limited vertically to the size of the page. In MSWord, this cell automatically wraps to the next page, however in Pages, the cell simply stops growing and the text appears to continue "behind" the next page.
We've tried to devise other layouts for her work, but tables seem to be the only feasible alternative. Using columns would not help her at all, text boxes would be too cumbersome, manually splitting the cells would make the document extremely difficult to edit (all her documents are, for a very long time, a work in progress, so editing happens all the time).
Can anyone help us out here? I'm || this close to going out to buy her a copy of MS Office, as no other word processor I've tried (Pages, AppleWorks, NeoOffice/J, OpenOffice) manages to deal with this properly. This would be a major admission of defeat.
Anyone?
Thanks,
/Eirik

Welcome to Apple Discussions Elrik
I have a Pages document with a single table that spans 11 pages. Unfortunately, it took a bit of fiddling with it & I can't remember how I did it. This is a table I had converted from AppleWorks, which also doesn't easily allow tables to span page breaks. I think I got it to do it by inserting new rows in the middle of the existing table. Then I would select & drag the contents from an unconnected table on another page into these new rows.

The bullet list, numbered list and the normal text is not converting when I am converting from RH 9 to MS Word 2010

Hi all,
Greetings for the day
I am created a new CSS in Robohelp 9. I have also created a new template in Word 2010. The style sets for different information elements like (Heading, bullets, body text, ) are more or less same between the CSS and the new templates. I am also able to map the .css styles to Word template when I am converting from RH to Word as I am getting the necessary option in the drop-down list.
However, when the output is generated, the bullet, the numbered list and the body text is not converting at all. The body text works sometimes. However, the numbered list and bullet list is coming out as images.
If anybody knows the solution, I can share the .css and Word template.
Thanks in advance.
Regards,
Parag Deb

Create a new project with two or three topics containing lists of both types. Generate a printed output that shows the problem. Then zip it up and send it to me. See the Contact page on my site for instructions.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

AP Account Analysis Report USD not converting to Functional Currency

When I am running AccountAnalysis Report , USD not converting to SGD\
08-JUN-09 3D NETWORKS SINGAPORE PTE TI10050729 Invoice Nonrecoverable GST Yes
USD 8,395.36 8,395.36 530000844
Regards,
Ajit
Edited by: Ajit Raut on Jul 27, 2009 8:10 PM

Resolved,
==============================================
Please find below notes;
Not all reports are appropriate to run under MRC responsibility.
The reports that do not have set of books as parameter cannot show thedata in reporting currency as
sob is not supplied. So all such reportsnot having set of books parameter cannot be expected to show
the outputin reporting currency.
Refr to the document "Multiple Reporting Currencies in Oracle Applications"
Appendix A: MRC Reporting Responsibilities:
Section Request Groups (page A-8)
Extract from the document:
The predefined MRC request groups allow you to access only those reports
and programs that are "appropriate" to run when using a reporting responsibility.
Pre–defined MRC request groups are in the format MRC Programs <product code>.
Payables
=======
The following reports are available in the MRC Programs AP request group:
• Accounts Payable Trial Balance Report
• Posted Invoice Register
• Posted Payment Register
• Posting Hold Report
• Transaction Reconciliation Report
• Journal with GL Details Report

I want to create a document/spreadsheet (whichever) that I can send to agencies to type in information for work projects. Any ideas? I have an Excel file but it does not convert over very well and I am having trouble making changes to it.

Need to create a new spreadsheet or be able to edit the one I have.
I use this spreadsheet as a work order form for social service agencies. They enter name address etc., and then there are various work projects that they can select as well.
The one I have from the organization I work with is an excel file but it does not convert over very well. Instead of being 7 pages it is more like 11 or so because things run off the page. I am trying to delete certain things and move them over but not working out very well so thought it might be easier to start over fresh.
Is numbers the program to use? If so, any useful tips?

If the form is going to be used on an iPad, Numbers is the only game in town.
Numbers is available for Macs only (and iOS devices). Excel is available for PCs and Macs. If you are in a mixed environment of Windows PCs and Macs and you are using this document as an electronic form, Excel is probably the better choice. Otherwise you will need to export to Excel for the PC users then import from Excel to retrieve their data. The import/export process is not perfect. A file that has been exported then reimported will not be the same as the original file. I would assume social services agencies are almost entirely PC-based.
If the form is to be printed or turned into a PDF for distribution and use by the social services agencies, either Excel or Numbers would do the job but right now Excel might be the better choice. I would have recommended Numbers '09 but I cannot recommend Numbers 3 for anything thsat requires printing until they give us the layout and printing functionality we used to have (editing in Print View, ability to set margins, etc).
If everything else in your department/operation/agency is Windows PC and Microsoft Office based, you would be better off sticking with the standard.
I hope that helps.

Why can I not Convert a Microsoft Office Document to a PDF using the Context Menu?

Why can I not Convert a Microsoft Office 2013 Document to a PDF using the options found in the Context Menu? (Ex: Convert to PDF, Combine Supported Files into PDF?)
I updated to Acrobat XI PRO recently, but now i'm unable to combine or convert microsoft word docs to PDF.
In Adobe Acrobat X I had this feature below, and it would combine Microsoft Office Documents all into a single PDF. Now I no longer have this issue in Adobe Acrobat XI Pro. It seems like it was program named Adobe Elements that was running the conversion.

Ajlan. That page is showing as not available. Would the fix apply to Adobe Acrobat X and XI?
Zach Moses
Direct Phone and Fax (615) 577-5814 | [email protected]
W Squared, Inc.
5500 Maryland Way | Suite 200 | Brentwood, TN 37027 | www.wsquared.com<http://www.wsquared.com>
This email and any attachments may be confidential and are solely for the use of the individual to whom they were intended. If you are not the intended recipient of this email, you must take no action based upon it, nor must you copy it or show it to anyone. Please immediately reply to the sender if you suspect you were not the intended recipient. All contents of this email are provided "as-is" without warranty of any kind and are subject to change without notice. W Squared assumes no risk from the recipient's use of this email. W Squared is not a certified tax firm or law firm and recipient should not rely on any communication from W Squared or its employees as having such authority.

Photoshop CS2 File Info Templates fill in all pages, not just it's own

I just purchased an Acer Laptop computer, has an AMD 64x2 Dual Core Processor, 2GB of DDR2 Ram, 160GB hard drive with Windows Vista Home Premium preinstalled. I'm not sure how any of this could be of any help, though.
I've just installed Photoshop CS2, Neat image noise remover, Nik sharpener, and Huey pro calibrator on it.
This is to be a second computer to a Dell desktop, that will be used when out of town and we want to work on our images.
Today we opened Photoshop CS2 and tried to work on some Raw images. We were just going to crop them and fill in the File Info on them then save them to jpeg.
The cropping went fine. When we tried to enter file info and save the Metadata Templates we had trouble. There are 7 of 12 different pages of info that can be changed, the other 5 can't be, I think. Anyway, we were filling in the Description, IPTC Contact, ITPC Content, IPTC Image and IPTC Status pages. We saved the IPTC Contact page as a Metadata Template.
The first image went fine, but when we opened other images, and typed in the information it all changed back to the information on the first image we did when the saved Contact template was used. When we saved the IPTC template for the first image it save the information on all of the pages, not just the Contact page. When we realized this, I started playing around with it and whatever template was saved last will give you all the information typed in on all pages that was there when that template was saved. I also checked the Photoshop CS2 installed on the Dell Desk Top and it is working correctly. We have templates for Description, IPTC Contact, and IPTC Image saved on it. These will give you the information on the individual page not all.
Why would it be doing this on the Laptop and more importantly, how can I fix it?
I sure hope this makes sense and do apologize for the length of it. Thanks in advance for any help I can get. Linda

I was having a similar problem - I was saving an SVG from Illustrator, only to find that when I tried to open it or place it back in Illustrator, I got the error "This SVG is Invalid. Validate it before opening."
You can run the SVG through the W3C validator, remove all the parts causing errors using a simple text editor like Notepad, and then Illustrator should be able to open it. This is a laborious process though if you have a lot of SVGs to save.
After a discussion with Apple support, I learned that it was actually one of my graphics in the Illustrator file that was causing the issue. I had placed an SVG I received from a co-worker, changed the colors, and was trying to save it as an SVG again, but for some reason I kept getting that error, even when I tried save other icons/layers in the same document. When I deleted the two layers that were corrupt, the Save As SVG worked perfectly, no errors when opening the file.
I don't know details, but if you are getting this error, try the Flatten Transparency thing like witkacy suggests. If you're still having problems, it may be caused by an SVG you placed in your file. After a little bit of trial and error, you may be able to find the culprit. You may then have to re-create the graphic yourself (like I did). Converting it to outlines or a shape or something may work as well, but I'm not sure.
Hope this helps someone else!

When I upload photos from my Canon Rebel 1000D to iphoto the images are labelled JPEG, yet I shoot in RAW.How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg.

HI,
When I upload photos from my Canon Rebel 1000D to iphoto the images are labelled JPEG, yet I shoot in RAW.How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg. I seem to have tried and read so much but just can't figure it out. How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg. Or do a have to use a different system? I have Adobe Bridge. Or can I upload directly into photoshop?
Also how do you install dmg's properly I am having problems installing them?
I have a Mac OS X 13 inch Version 10.6.7
Advice desperately needed
Thanks
Nlouis

Do you have Aperture installed? I found your model on a compatibility list; however, there was a note that it requires Aperture 2 to be installed:
http://www.apple.com/aperture/specs/raw.html
According to this excerpt:
To see a list of digital cameras with RAW-format support that are compatible with iPhoto, visit this Aperture webpage (any camera compatible with Aperture, Apple’s advanced photo editing and management program, is compatible with iPhoto as well)
which is at the bottom of this page:
http://docs.info.apple.com/article.html?path=iPhoto/9.0/en/pht41627265.html
I may be wrong, but I interpret that info to mean you need Aperture 2 before iPhoto will work with RAW?

PSE12: How to create gridlines on the image page then converted into a pdf? [was: N276]

I want to download an image from the internet, for example, batman, create gridlines on the image page then converted into a pdf. where on adobe photo shop element 12 can I do this.

On way is to define a pattern:
https://forums.adobe.com/thread/875370?tstart=0
Another way is this neat free grid generator filter:
http://www.richardrosenman.com/software/downloads/
1. Add a blank layer above the picture layer, fill with white, and set Blend Mode to Multiply.
2. Apply the filter. There are many options. Here I chose black lines on white background with 20 square boxes across. Note that the background should be pure white (255,255,255) so as not to change the original picture.
You can also find lots of grid images on the Internet, for example a Google search on "grid" or "grid paper". As in the previous method, add this image above your picture and set its Blend Mode to Multiply. Again, the background should be pure white.

Use of "Next paragraph same page" check box in paragraph format of SCRIPT?

Hi Guys,
What is the use of "Next paragraph same page" check box in paragraph format of SCRIPT?
Don't Send me the F1 help ....i am not clear with that help it is quite confusing.
Provide example if possible.
Solutions will be rewarded.
Regards,
GURU

Hello.
You probably know the idea of PROTECT command. It makes that a paragraph wont break in two. If it fit's totaly in one page it will print in that page. If not, it will print totaly in the second page (won't break at the middle).
The checkbox you are asking, makes the same with two paragraphs. This means that if you have paragraphs A and B (A becomes first) and if paragraph A has that option, the next paragraph won't break, and appear in the second page. If paragraph A is in first page, paragraph B will print in first page too, or they will both print in second page.
Try it.
Best regards.
Valter Oliveira.

Help convert spread pages to single pages when converting Indesign to PDF for printer

I have an Indesign booklet of 28 pages which I need to convert to pdf as single pages so I need to turn off the spread pages/facing pages option so I can convert to pdf to get it printed. I know how to turn the spread/facing pages off but when I do this it affects the master page and all the pages become left hand pages and the headers/page nos are in the wrong place. I have looked at numerous websites/blogs and everyone seems to have the same problem. Can anyone help me please as this is really urgent now?

Actually, you DON'T want to undo the facing pages. Just export using the settings recommended by the printer and you'll get one PDF with individual pages, not spreads, as long as the Spreads box is not checked.

Proxy servlet returns "page not found"

I want all request ending with "/PPO" will be proxy to "http://www.yahoo.com".
          Explanation:
          Our application is deployed on:
          C:\bea\user_projects\rci_domain\applications\rdas
          "rdas" is an applications context, we access our application using:
          http://localhost:7001/rdas/LoginDev.jsp
          I want the following request should be proxied to another server.
          http://localhost:7001/rdas/PPO (request for "PPO")
          Should Proxy to: http://www.yahoo.com
          I tried to simulate the same type of scenario. Following is a part from my web.xml file.
          <servlet>
               <servlet-name>ProxyServlet</servlet-name>
               <servlet-class>weblogic.servlet.proxy.HttpProxyServlet
               </servlet-class>
               <init-param>
                    <param-name>redirectURL</param-name>
                    <param-value>http://www.yahoo.com</param-value>
               </init-param>
          </servlet>
          <servlet-mapping>
               <servlet-name>ProxyServlet</servlet-name>
               <url-pattern>/PPO</url-pattern>
          </servlet-mapping>
          Problem:
          It is taking me to yahoo.com, but with "Page Not Found" content. I donâ€™t know why it is showing the yahoo.com page with "Page not found". For example you will see the same page what I am seeing using HTTPProxyServlet, if you try the following:
          http://www.yahoo.com/rdas/PPO
          or
          http://www.yahoo.com/blabla
          Note: I can not define "context-root" set to "/" parameter in weblogic.xml file, because our application is accessed using "/rdas". All request must have /rdas as well.
          I donâ€™t know what I am missing here. Your solution/suggestions are really important. Your earliest reply is really grateful.
          Thanks
          Farhan

As Peter says, it might be a bug. I did another test. Selected the URL from my IDD, opened the Hyperlink panel, clicked on Create New Hyperlink and this is what I get: http://www.projectorcentral.com/paint_perfect_screen_%24100.htm. So ID is changing "$" to "%24". But, when I click on Go To Destination, still takes me to the website! I'm on a PC with CS6 8.0.1 and using Google Chrome.
Did a second test just for fun: without selecting the URL in the ID, I went to Type/Hyperlinks & Cross-References/Convert URLs to Hyperlinks and ID creates two Hyperlinks: http://www.projectorcentral.com/paint_perfect_screen_ and a separate: 100.htm. So, ID splits the Hyperlink right at "$". So definitely ID doesn't like the "$".

Paragraphs Spanning Pages Not Converting

Similar Messages

Maybe you are looking for