Paralells message, major error

I was running windows xp pro 32 bit with parallels 5.0 on my 2010 macbook pro, I was using some windows only music software. I then opened itunes on the mac side/on mac os, to move the albums into itunes, as soon as itunes starts, it opens software update, & offers me an itubes update, software update starts to check for it, I clicked cancel as I was in the middle of using itunes. I then tried to load an album into itunes from my external hard drive plugged in & being accessed on my windows xp pro virtual machine.
All of a sudden, paralles seems to quit, or disappear, I click on it's icon in the dock,to try & start again, but I get a message that parallels had recovered from a serious error, with an offer to send an error report.
Anybody have any idea what I may have done wrong?
I have been having a little trouble with my mouse & external hard drive sometimes not working together, sometimes my mouse would get disabled when the drive was turned on.
Also have been having weird desktop icon behavior on both my virtual machines (windows 7 pro 64 bit & windows xp pro 32 bit) in parallels 5.0, dont know if these had anything to do with it.
Did I just have too much going on at once?
After parallels was shut down, I went back & started it up & started my windows xp pro virtual machine & everything seemed ok, then I shut down windows & parallels, & all seemed to work ok.

Sossity wrote:
I then tried to load an album into itunes from my external hard drive plugged in & being accessed on my windows xp pro virtual machine.
That device was bound to the Windows side. External devices can only be "connected" to either the Mac or Windows - not both. The only way to access it from both is to connect it to one side and share it from that as a network drive.
Anybody have any idea what I may have done wrong?
Messing with hardware while the virtual machine was using it.
I have been having a little trouble with my mouse & external hard drive sometimes not working together, sometimes my mouse would get disabled when the drive was turned on.
On Windows or the Mac?
Also have been having weird desktop icon behavior on both my virtual machines (windows 7 pro 64 bit & windows xp pro 32 bit) in parallels 5.0, dont know if these had anything to do with it.
That just sounds like Windows.
Did I just have too much going on at once?
With all due respect, it sounds like user error
After parallels was shut down, I went back & started it up & started my windows xp pro virtual machine & everything seemed ok, then I shut down windows & parallels, & all seemed to work ok.
So no worries.

Similar Messages

PSE 8 - How do I fix the error message: An error has occurred reading files or writing to disk...?

Hello
I am using Photoshop Elements 8 on Windows 7 (64 bit). I have all my photos stored on an external hard drive connected by usb. The photos were transferred onto the HDD from a Windows XP machine. I bought a new computer so I installed Photoshop 8 and imported all my photos to the organiser from the HDD. I have also taken some photos yesterday which I have uploaded to the HDD.
Now, when I want to delete a photo I check the box to say I want it to be deleted on the hard disk and I get the error message: 'An error has occured while reading files or writing files to disc. The disc may be full or there may bea problem with the source media.' This does not happen with the photos I uploaded yesterday, only the ones which were put onto the HDD from the XP machine.
Please could someone help? I have tried the File>Catalog> repair and optimise functions. I have reinstalled the software. It still does the same.
Thank you in advance
Dave

David GW wrote:
The error message goes on to say, Please check your device settings or consult your device documentation regarding resolving writing errors. Which device do you think they are referring to?
Sorry, but I would have thought that this was rather obvious! The only device capable of being written to under these circumstances is your CD drive; after all, it's a CD you are trying to create...
You have two potential major causes of problems here. The most common cause of these difficulties is the disks themselves - you only need a batch with poor reflectivity to cause all sorts of read errors, so that's the first thing to try - using a different brand of disk to write to. The second thing you have to realise is that CD writers have a finite life - the lasers in them simply don't last for ever, and towards the end of their lives the power behaviour tends to be a bit erratic, and it tends to fall off somewhat - which causes the same sorts of errors, simply because the dye doesn't get evaporated efficiently. This causes mis-formed pits, hence the read errors. The only solution here is to install a new drive.
When it comes to reading, commercial CDs have a much higher reflectivity than ones you write yourself, so often these will play whilst your own will fail - a common cause of confusion, this. But it's worth checking; if you get failures to reproduce all of the tracks from a commercial pressed CD, then almost certainly your drive is failing.

Adobe Premiere Elements 7 files encountering major errors

I have Adobe Premiere Elements 7 and every time I try to edit certain parts of my movie I get major errors. Here's what I've done to try to fix the problem:
gone through some of the troubleshooting tips from adobe.com
uninstalled and reinstalled PE7
did a system restore to several days ago when it was working fine
The movie I am editing is over an hour long, and has a variety of movie clips, pictures, narration, and music. When I press play it works pretty good, but when I want to move the narration around or "clear" a certain clip, it goes crazy!! Here's a few of the error boxes I've seen:
Premiere Elements Debug Event
[..\..\Src\Sequence\TrackItemTrack.cpp-480]
and also this one
[..\..\Src\VideoSegment.cpp-55]
When those come up I can only click "continue" and then it pops up again and again until finally it says that there was an error, it must close down, and it will try to save the project.
This has also come up before the file opens:
Found default catalog. Trying to open the default catalog.
And, when I did the system restore this came up when I opened PE7:
The licensing subsystem has failed catastrophically. You must reinstall or call customer support.
I have a deadline to meet with this movie, but I can't even edit it closes down on me so much! I have tried opening other PE7 movie files and edit them and they seemed to work fine from the little I did. Could it be that the file itself has something wrong with it? I have had minor problems with PE7 before but nothing as bad as this! I have my movie file saved on the computer hard drive, and two separate external hard drives. I have tried opening the file from all three places but they are all the same.
I am not a computer whiz, but If you need any more info, let me know, and please respond ASAP!!
Thanks!

Well, it's not working again. Here's what happened:
I opened that other file this morning, like I told you. I edited for a few hours, then I added a picture, then tried moving some clips that were grouped together, but instead of moving them it did something else (not sure what) and then it said there was an error and it had to close down (I was able to delete the picture off the timeline, just in case that was causing the problem, which I don't think it was). I was glad to have gotten so much editing in, but really disappointed it wasn't fixed completely like I'd hoped. So I opened PE7 again and it said I needed to save the file as another name. So I did that and kept editing for another few hours, with no major problems. Then, when I was moving something around again there was an error message and it closed down. At this point I was thinking "This isn't good, but hopefully it will open again and work like last time." But no, this time, the file wouldn't even OPEN!! This is the worst it's been. Those same error messages come up (PE Debug Event) and a new one too:
Microsoft Visual C ++ Runtime Library
Runtime Error
Program: ...\AdobePremiereElements7.0\AdobePremiereElements.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
I've been having a few minor problems with Windows Vista as well, such as the scroll bar on the Internet going up and down like crazy for several seconds, and also a runtime error (similar to the one above) when I open a folder under my computer. Could it be I have a virus? I have Vipre antivirus installed on my computer so hopefully that is taking care of anything like that.
I can open a copy of the movie file I made earlier today (but I'm not sure yet if I can edit with it or not - I don't want to make a bunch of changes and lose my work!), but not the latest file I worked on that had the last problems. Here are my project presets:
(this forum won't let me copy and paste!)
General
Editing Mode: DV NTSC
Timebase: 29.97 frames/second
Video:
Frame size 720 horiz. 480 vert. 16:9
Pixel Aspect Ratio: D1/DV NTSC Widescreen 16:9 (1.2)
Fields: Lower Field First
Display format: 30 fps Drop-Frame Timecode
Audio:
Sample rate: 48000Hz
Display format: audio samples
Capture format: DV capture
Video Rendering
Maximum bit depth (not checked)
Previews:
File Format: DV NTSC
Compressor: DV NTSC
Color Depth: millions of colors
Optimize stills (checked)
The narration is a .wav file,
the pictures are .jpg
the videos are all .avi (some were conformed from .MTS to.avi with PE7 under SHARE)
By "assets, stills, video etc. on the timeline" do you mean I should tell you everything I have on the timeline in order? Or did you mean something else? I was a little confused by that (I'm a visual person and so new to this!).
Thanks so much for your help!!

Help major error!!

I'm getting this error message when I try to delete one cut on my timeline, then adobe crashes. Can anyone shed any light. I am on a tight deadline and honestly don't know what to do;
[/singlebarrel/releases/2014.03/shared/adobe/MediaCore/Backend/Src/Sequence/Action/TrackIn foChangedAction.cpp-88]
it then says major error adobe must close.

You could try creating a new project and importing the old one into it. That sometimes fixes errors like this.

Messaging:System Error(-10)HELP NEEDED!NEED BEFORE...

Messaging: System Error(-10) [Nokia N70] URGENT HELP NEEDED! - NEEDE BEFORE WED 21ST MAY '08 - BUT HELP OTHERWISE APPRECIATED!______________________________
Hey,
I need this help before Wednesday 21st May 2008 as I am going abroad and urgently need my phone. I have had my phone for just over a year now and I have never had any problems with it up until now.... Think you can help...?
This is the scenario. My messages are saved under my nokia N70's MMC memory card and when I get a message there are a number of problems.
1) My phone does not vibrate or alert me when a message comes in. I have checked my profile settings and they are all up to volume.
2) When the messages come through they are not displayed on the main window of the phone as "1 New Message Received" but in the top corner with a little envelope icon. I know the icon normally comes up but the "1 New messge received part doesn't come up.
3)When "1 New Message Reveived" is not displayed on the main window I go into the "INBOX". When I click inbox on "Messaging" the phone displays an error saying: Messaging: System Error(-10) with a red exclamaion mark. The I can not write any messages, view sent, or drafts.
I have tried to change me message settings by going on "Messaging"> Left Click "Settings" > "Other" > "Memory in use" and selected "Phone Memory". This works but then my I looses all my previous messages.
4)My phone is also dead slow. I click menu and it takes at least five minutes to load menu.
IF YOU COULD HELP ME ON ANY OF THESE ISSUES I WOULD BE MAJORLY GREATFUL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks Soo Much,
Robert__________

U said in another post u've tried all my solutions = =?
On that post its for Nokia N95 u kno? Although the problem is similar, but different phone model can lead to quite different solutions.
Are u sure u tried all my solutions?
have u tried this?:
/discussions/board/message?board.id=messaging&message.id=7926#M7926
Also format ur memory card, do not use content copier! dont install too much softwares, as ur phone model is old and doesnt have much space.
This is from NOkia, sometimes does work depending on ur situation:
Memory low
Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid
memory getting low:
• Messages from Inbox, Drafts, and Sent folders in Messaging
• Retrieved e-mail messages from the device memory
• Saved browser pages
• Images and photos in Gallery
To delete contact information, calendar notes, call timers, call cost timers, game scores, or any other data, go to the respective application to remove the data. If you are deleting multiple items and any of the following notes are shown: Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data., try deleting items one by one (starting from the smallest item).
use device status http://handheld.softpedia.com/get/Desktop-and-Shell/Windows/Nokia-Device-Status-57673.shtml
to maybe let me see what u got on ur phone (by saving/exporting report).
Make sure u have the latest firmware! Updating firmware is like a hard reset but also upgrade.
Message Edited by goldnebula on 20-May-2008 02:05 PM

Major Error on SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX

Hello
Does anyone know what that means?
All Lincards are SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX
Mod MAC addresses                       Hw    Fw           Sw           Status
2 0011.20b9.0f72 to 0011.20b9.0fa1 10.0   7.2(1)       12.2(33)SXI9 MajFail
3 000d.ed4e.7f36 to 000d.ed4e.7f65   7.0   7.2(1)       12.2(33)SXI9 MajFail
4 0014.a9df.2e28 to 0014.a9df.2e57 10.1   7.2(1)       12.2(33)SXI9 MajFail
5 0014.a9f7.02f4 to 0014.a9f7.0323 10.1   7.2(1)       12.2(33)SXI9 MajFail
6 0015.f9f1.88d0 to 0015.f9f1.88ff 10.1   7.2(1)       12.2(33)SXI9 MajFail
7 0014.a9df.4910 to 0014.a9df.493f 10.1   7.2(1)       12.2(33)SXI9 MajFail
Last night we had a HSRP switchover.
At the moment everything is working fine.
Regards Horst

Hi Horst,
Glad to hear that the issue was resolved, about the cause I think that you mentioned that there was a switchover, if that switchover was done by reloading the active box sometimes it might be possible that the modules will report minor/major errors upon boot up. There can be different causes like soft/hard parity errors or when the supervisor checks the interrupts on each module in the system by periodically polling for the error counters maintained in the line card.
Repeated errors, often referred to hard errors are caused by failed components, normally when this happens the show log will provide an error message showing the exact cause of the error and most of the time a simply re-seat will solve the issue. This should not affect all modules at the same time it can be possible that some will show errors and some not.
Regards,
Leo

Cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp

cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

SAP System Message: Syntx error or generation error in a screen

dear sap basis gurus,
i am currently having problems signing on to our DEV server. i get this error message:
<SID>: SAP System Message
Syntx error or generation error in a screen.
it won't let me log on.
there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
have you encountered this problem before? please help me as there we have two imminent go-lives.
thank you very much in advance.
best regards,
albert

hello nick, ashok,
thank you very much for your responses.
i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
i hope i would no longer encounter the error message.
again, thank you.
best regards,
albert

I get error message "unknown error" When trying to log on to itunes via pc, help please!

I get error message "unknown error" When trying to log on to itunes via pc, help please!

Hello, trolle56.
Thank you for the question. You may find these articles helpful in troubleshooting the error received with the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H.

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html

Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
== This happened ==
Every time Firefox opened
== FF updated to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Hello I am just wondering why there is a message of error 1004 when i tryed to make the update on my apps. Does someone know what it means?

Hello I am just wondering why there is a message of error 1004 when i tryed to make the update on my apps. Does someone know what it means?

Yes, many know what this means. You can too. Just type in "error 1004" in the search box at the top of this page. Or, just look to the right. You'll find many links in the "More Like This" box.
Always good forum etiquette to search for previous posts on the topic before posting.

I get error message: "An error occurred with the publication of album...Authentication with server failed...whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. What do I need to do?

I get error message: "An error occurred with the publication of album...Authentication with server failed. Please check your login and password information" whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. I am hoping I can retrieve these "lost" files. What do I need to do?

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

Palm Pre crazy symptoms: "phone offline", will not charge battery, will not start, error message "an error has occured that cannot be resolved"

This is a long description of a series of problems with my new Palm Pre. You may wish to search the text to find your specific issue(s). There is no solution in my post. Look for possible answers in the responses to come.
I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone worked great. Last night I plugged in the phone and updated the OS. After completion, I selected "Done" and went to bed.
- First Series of Issues: "Phone Offline", will not charge battery -
In upper lefthand corner of the phone there is the message "phone offline". Although the phone has been charging all night it reads "26% battery". I called the general Sprint tech support number and we tried the following things:
1) Restart phone (press and hold power button, then select "turn off". after power down, press and hold power button to power on.)
2) Reset the phone (several different ways - call tech support so that you do this correctly)
The individual at Sprint then sent me to another tech support person, presumably 2nd tier.
- Second Series of Issues: Error message "an error has occured that cannot be resolved" -
Sprint tech support person #2 also had me restart and reset the phone in a number of ways. In her words "we've tried every palm pre trick I know" and each time the phone was unresponsive. Often we received the error message "phone is offline". We did a full erase and after that the phone would no longer restart. At this point the error message came up saying "an error has occured that cannot be resolved" which referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky background with a semitransparent box over it with white text.
Sprint tech support person #2 then connected me with Palm support and the dance continued. Again we tried a whole bunch of resetting and restarting and erasing options. Palm support instructed me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. While that was happening he had me hold the "volume up" button and plug the phone into the charger. This caused a USB symbol to appear on the phone. When the file was complete I received an error message that the file couldn't run. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He then transferred me to another Palm support person who works with Mac users.
Palms tech support person #2 then informed me that I should have selected the "mac" download option on www.palm.com/rom. I verbally walked her through the whole series of webpages, telling her that it says that you need Windows (version whatever) or Mac (version whatever) but that at no time was there an option to download a different WebOS Doctor for different operating systems. After some more discussion she told me she would have to have someone call me back tomorrow.
- Third Series of Issues: phone stuck on USB symbol -
So at the moment the phone is completely useless. Not fantastic. I booted up the mac in Windows 7 and downloaded WebOS Doc and received the same error. I also ran Windows Vista virtually and received the same error. Later this afternoon I'm heading into work to try the same thing on Windows XP.
In the meantime, I got onto this forum and located a thread that provided a direct link to the necessary file:
palm.cdnetworks.net/staging/rom/webosdoctorp100ewwsprint.jar
After downloading that file, which I realized could totally be a virus, I was able to get WebOS Doc working on my computer. It required that I recharge the phone completely before beginning and now it's on the screen that says "Don't disconnect your phone" and the file is at 3% complete. Only... it's been at 3% complete for almost 30 minutes.
I am hoping that Palm will follow up with me tomorrow, but I'm leaving at 7am on a business trip and would love to have the thing working. Any suggestions are welcome, even if you can just tell me how to get the think disconnected safely before my flight tomorrow. I don't fancy getting through security with my phone wired to my laptop.
Thanks.
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

Hello and welcome to the forums;
Our phone support is open every day Monday through Sunday, although there are different hours of operation for the weekend. If after a webOS Doctor reset you are still experiencing the same problems, I would likely recommend replacement, either in a local store for your carrier or through our technical support department.
There may be additional technical support offered or suggested over the phone, this would need to be done first before a replacement could be issued.
Hope this helps,
TreoAide

Acrobat 9 Pro: Message "An error exists on this page. Acrobat may not display page correctly.

Hi everyone,
I posted this in September: "Over the past week, I have received pdfs from 2 different graphic design contractors that do not open correctly in Acrobat 9 Pro. There is an error in the document and when I scroll to the page where the error is, I get: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." I did this, and the contractor remade the pdf 3 times, and I still couldn't open it. This contractor is already using CS5. For the problem today, I haven't asked for it to be remade yet--decided to see if I could find out if anyone else is having the same problem. The second contractor is using CS4. The only thing that I have done differently at my end over the past week is upgrade CS4 to CS5. I already had Acrobat Pro 9 so I didn't update it when I updated my CS5 products. Should I have upgraded Acrobat 9 anyway? Somehow, it doesn't feel right that this is the problem. Any info on this would be appreciated."
I got one response from that posting, suggesting that the pdf was corrupted over email. That wasn't the problem.
What I didn't say above is that whenever I got an error message upon opening the pdf and clicked OK, I got another message: "Insufficient data for an image." I found that one or all of the images in the pdf were missing. Upon further investigation, the contractor and I found that sometimes the error message pointed to a specific font used--that being a Helvetica Bold font. Once we substituted it with a Helvetica Neue LT Std Adobe Opentype font, we no longer had an issue.
However, the problem rose it's ugly head today--what, 6 months later! I'm talking about 2 different pdfs this time.
For PDF#1, I got this error message about the font: "Cannot extract the embedded font 'JNAGNS+HelveticaNeueLTStd-Bd'. Some characters may not display or print correctly." When I click OK, I get another: "Insufficient data for an image." The images don't show up in the pdf. What I don't understand about this pdf is that this is one of those that was fixed in September. The only changes made in the document was to paragraph text--none to the text in the images. When I opened the revised pdf today, I am getting the same message again. This makes no sense.
I returned to my September blog to see if any further advice had been posted, but nada--not even anything from Adobe about it. I goggled until I found where someone suggested running a "Report PDF syntax issues" analysis in Preflight. I did that and even though the analysis showed the pdf passed, I checked the fonts in the list and saw that the one pointed to in the error message showed that a long list of glyphs were missing on both pages of the pdf. I have asked my contractor to replace her font with a new one, in case it has gotten corrupted. Haven't a new pdf to open yet.
Then when I opened PDF#2, I got the message: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." When I ran the "Report PDF syntax issues" analysis in Preflight, I found got this warning: "Invalid operand(s) for operator (1 match on 1 page)". I clicked through and under "Page Description Errors/Invalid operand(s) for operator", it identifies Operator Name, Stream State, Operators Read, and Traversal Path. Under "Trigger Values" is says "Invalid operand(s) for operator: is true". None of this means a thing to me so I can't figure out what the problem is.
Let me say this: Both the contractor and I are using CS5 and Acrobat Pro 9, on Lion. If it helps, the contractor also sent one of the problem pdfs back in September to my boss who is running Acrobat Pro 9 on Windows 7 and she got the same messages.
Does anyone out there have a suggestion for us? PLEASE HELP!!!!

Thanks to all for posting suggestions. As it turned out, the contractor who was having a problem reinstalled Acrobat 9. She works from home and is emailing the pdfs to me. Things were running smoothly until this past week, when the problem started again. Whenever I get a pdf that won't open properly or print, I asked her to zip it and it is no longer a problem. Last week, I had the same problem start with a contractor in Florida and she also zips the pdf when there is a problem. Now I am thinking the problem might be at my end. I wonder if something is happening to them when they come through our firewall at work. I asked IT about it before but they didn't have a clue what the problem might be. Right now, zipping is the answer...who knows how long that will continue to work.

Paralells message, major error

Similar Messages

Maybe you are looking for