Parallax Issues?

Why does parallax not seem very 3D and slow is there an adjustment for sensitivity rather than on/off? Especially horizontally rather than vertically...

Might be a problem with the accelerometer.
Try a reset.
Press & hold both Power & Home until you see the Apple logo.

Similar Messages

IPhone 5 wallpaper parallax issues?

I updated to ios 7.1 and since the update my wallpapers won't utilize the parallax function. Even with the reduced motion setting turned off.

Might be a problem with the accelerometer.
Try a reset.
Press & hold both Power & Home until you see the Apple logo.

360 Virtual Tours...

Hello, this may not be the correct place for this question, but I assume Final Cut Pro experts would definitely know this stuff. My situation is I need to start creating 360 degree virtual tours of inside buildings and whatever else my client needs which will then be put on their website. Is FCP capable of doing this, or do I need to buy a special program? Does anyone have any suggestions or advice on products they recommend? I need something which looks professional and high quality. Ease of use and simple user interface would also be very important.
Thanks,
Erik

Couple of thoughts...
First off, a "nice DSLR" can certainly be overkill. A more critical piece of gear is going to be a tripod head that is built to rotate around the camera's nodal point. Without this item, you're very likely going to develop parallax issues - i.e. a post-production nightmare. These issues might even be significant enough to render your project impossible. Anyway, something like the Nodal Ninja comes to mind. Manfrotto makes similar items. At the top left of this page you can click links to one of the 4 models that they make.
Then for post, there are several options. Like Autodesk Stitcher or PTGui. (The latter being less expensive than the former.) The goal of both of these products is mostly the same: stitching images together into a cylinder or a cube. Pretty sure that both apps have trials available if you want to try them out. Here's a nice long list of similar products that are available.
As was noted, by bogiesan, this really isn't the realm of FCP. It's different techniques/technologies.

Issue with Adobe Muse parallax jitters with mouse wheel scrolling vertically.

Hi all,
I'm learning Adobe Muse for the first time to put together a wedding website (http://mattandsangeeta.businesscatalyst.com/index.html), so bear with me as I'm a novice at the software - though I do have the most up version, Adobe Muse CC 2014.
So far, it's been an excellent platform, and for the most part the site functions incredibly well. However, one key flaw I've noticed in it is the parallax scrolling speed when using a mouse.
The parallax portion of the site jitters badly, and while we've found a few improvements for the issue (the best was making sure there was nothing that had scrolling set to "0"), I'm still at a loss for how to get smooth scrolling transition speeds. Every forum Adobe has seems to be showcasing the features, and not troubleshooting this particular issue. A lot of posts are similar, but none seem to be resolved. I've noticed that other parallax pages are smoother with the mouse wheel scrolling down, so I'm hoping it's just an issue with Muse that has a setting or snippet of code that can remedy the issue.
What makes me realize it's the mouse wheel scrolling, and not the site itself, is because whenever I access the site on my surface pro tablet, the parallax runs buttery smooth with touch control or even trackpad control. Same when you click the middle scroll button and pan down. Without any mouse wheel scrolling, it looks great! But with a mouse wheel, it hiccups constantly and ruins the effect.
So, is there any way to smooth out the steps that the mouse wheel scrolling seems to be causing?
Thanks in advance,
Matt

Thanks for the link, however that specific thread was one of the ones I referenced in my original post.
In the beginning of the thread, it's clear that coding can fix the issue, though it's not recommended. More telling is that the response you referenced indicates that the issue is claimed to have been either fixed or mitigated In updated releases of Muse.
As you pointed out earlier, however, Firefox displays the parallax a little better than Chrome, and much better than Internet Explorer. I'm assuming that Adobe Muse Creative Cloud 2014 release attempted to this issue.
So my question kind of remains: am I missing a setting that would make the scrolling more smooth, or is it simply just a limitation of the browser / software / parallax combination?
Thanks again for the responses.

Parallax Scrolling issue

Home
If you visit my sample site. Click the "Our Concept" from nav. When it scrolls down, you will notice the nav bar moves slowly to the left.
and also when it does the scroll down effect, if you look at the top nav bar, you can see through the back page. My nav bar is already at the top.
How to fix those issue?

Hi
- Left movement for menu is due to anchor position movement with scrolling. Please check left movement field value for menu widget and adjust it accordingly.
- Page scroll shows page at Menu background , this because the menu widget frame scroll down the page while page scrolls up. Again you would need to check the key position and scroll movements and adjust accordingly.
Thanks,
Sanjit

IOS Wallpaper Scale/Zoom Issue Returns in iOS 7.1

Is anyone experiencing the photo zoom/scale for wallpaper issue again where they cannot fit scale down the photo subjects to fit into the iPad's frame?
This used to be fixed by turning off the Parallax effect via Settings > General > Accessibility > Reduce Motion ON
However, it seems like Apple has broken it again.
Can anyone else confirm this? I just tried changing wallpaper on iOS 7.1 and cannot get the photo to fit as if I was looking at it from the Photos App.

Nope, it's broken for me. Images with resolutions much larger than the iPads native resolution won't scale down. You can easily scale up, just not down. It's very aggravating that this remains an issue in 7.1
And, I'm sick of hearing people say it's working when it doesn't. It's not just my device. I've confirmed it on numerous devices new and old, iPhone and iPad. Not being able to scale an image down when you could prior to iOS7 is not "better". Losing capability is not "better".

A Designer with a H/Parallax and a bag of goodies

Hello, hopefully theres a person who knows the location to these - or can answer them???
Started using EA last week, and from a PS and AI background and I love it.
But I have an issue with the concept that is taken shape, and now I cannot complete it for client on time.
So I have all the artwork for a:
Horizontal Parallax moving Interactive Inforgraphic -
My stage is 600px H and 4000px W, with 5 seperate background colours 800px w each, which I would like to scroll though (horizontally ---no vertical movement)
So how do I activate horizontal scrolling???
I would also like a Next & Previous (forwards - backwards) button on each page which are clickable (mine aren't doing that!)
And finally on the base of the inforgraphic I require a contant measurement of your location and the page your on, so you can click 2 pages back if you wish.
I was thinking about Adobe Muse - but I don't want a seperate URL - client wants this to be embeded on their website.
If someone can provide a similar example, and tell me how to adapt to draw in my elements and symbols?
Many thanks,
PS - I've been added script from EdgeCommons on Parallax....am I doing it wrong?
yepnope({
    load: "http://cdn.edgecommons.org/an/1.1.2/js/min/EdgeCommons.Parallax.js",
          callback: function() {
                    EC.centerStage(sym);
                    EC.Parallax.setup(sym);
                    EC.Parallax.setup(sym, "horizontal");
// Show an Element
Many thanks!!!!

Sample here: https://app.box.com/s/fj9w3walfoo2b3cfn2u2
Add this plugin:
http://css-tricks.com/examples/HorzScrolling/jquery.mousewheel.js
and
add this code:
$(function() {
   $("body").mousewheel(function(event, delta) {
      this.scrollLeft -= (delta * 30);
      event.preventDefault();

Edge Animate CC 2014 issue with SVG - Images greater than 1024 x 1024

Hi, since i updated my Edge Animate CC for Edge Animate CC 2014 i have issues when i import .svg files. Edge told me "Images greater than 1024 may cause unexpected behavior on mobile device" when i import .svg files smaller than 1024 x 1024 ?
When i publish my animation i have a weird things happening and my image scaling default is 10% instead of 100% when i import. Someone had this issue ? Something we can do ? My images a less then 1024 x 1024 and work perfectly in Edge Animate CC 2.0

Ok. I've solved. I needed to load some things:
EC.Parallax.setup (sym);
The full code (that works for me) is:
-- compositionReady:
EC.Parallax.setup(sym);
// Load Edge Commons
yepnope({
load: [
"http://cdn.edgecommons.org/an/1.1.0/js/min/EdgeCommons.js",
// Load style sheet for the overlay
"http://cdn.edgecommons.org/an/1.1.0/css/style.css"
-- click
// Open image in spotlight overlay
// Set up configuration
var config = {
width: "1024",
height: "768",
type: "image",
source: "images/dog.jpg"
EC.Spotlight.open( config );
I hope to serve others.
Regards

Muse (Re-)Installation/Updating Issues

Hi all,
     I have been experiencing trouble in (re)installing Adobe Muse. I had Muse prior to the release of Adobe CC, and potentially during the beta. Around the time CC was released, a screen would appear on the launch of Muse stating that there was an update available (this message was not from CC or AAM, it seemed local to the program). When I would attempt to update through it, Muse and the associated 'popup' would crash, when the progress bar was approximately halfway finished; no error message showed prior to crash. Upon relaunching Muse, the same "update available" popup would show (I believe the update at the time was for parallax scrolling. I also may have been behind more than one version).
     This was all fine as I had no need for parallax scrolling at the time, and could simply say I didn’t wish to update at the time, allowing me to use the current version. After doing this for some time, I began to get annoyed at the need to dismiss the message every time I tried to use the program (along with not being able to find anything on Adobe’s forums adressing the issue). I decided to try and uninstall and reinstall the program, hoping this would help (by this point I had a CC subscription), however upon attempted reinstallation (through the CC desktop program), while the installation seemingly ran fine (it went at a normal rate to, I think, 57%, at which point it would finish the rest exceedingly quickly. This was reproducable, and still is, so if further information is needed on that, I can just run it again) and the CC desktop program states that Muse is installed. However, when looking at my installed programs list (through the control panel) it shows Adobe Muse as installed, but as taking up 0 bytes of data, and when looking through program files (standard and x86), I can find no evidence of folders or files pertaining to Muse (I retried uninstalling/reinstalling multiple times, but to no avail, along with things such as clearing the registry of old entries, rebooting the machine, making sure the firewall and anti-virus programs I have were not somehow blocking CC, so on and so forth. I have been able to install other programs from CC, and it is not a licensing issue as I am able to install Adobe Muse on another computer of mine (which did not have it installed prior) through the CC desktop program).
     Please keep in mind that my memory of all these events are not perfect, and this is just an attempt of mine to best recall what happened, given that most of this occured a while back and I simply haven't had the chance to post here until recently. My computer is an HP Pavilion running Windows 7 Ultimate, with 3rd gen i7 cores, and an NVIDIA Geforce GT 650M graphics card. Any and all thoughts appreciated, and I can supply more details regarding my computer or procedure upon request.
Many thanks for your time, suggestions, and efforts,
-Zachary Weiss

Hi,
You can install the latest version of adobe air from https://get.adobe.com/air/
Regards,
Aish

Ios 7.0.4 battery issue and DFU mode restore

Hi guys. My iphone has an issue with its battery since i updated my iphone from ios 6.0.2 to 7.0.1 until now ios 7.0.4. I have tried many things, like turn off parallax, background app refresh, location service, mail to fetch, air drop, bluetooth, celular data, delete icloud back up from iphone, delete email acount, reset all setting, restore from back up, restore and set it as new phone, but all thoose things didn't help. Now I loose 1% for 3 minutes. Before thoose update i loose 1% about 6 minutes.
But i have been oberseving so far to know what is causing this issue. This morning i did the DFU mode restore, exatcly not recovery mode restore. After DFU restore completed, i watched every each percent of my battery begun increases to 4,30 minutes while using internet via safari. After that i restored again from my itunes backup, and the battery back to 1 % / 3 minutes while using safari with the same setting. This is first time my battery increases, and my first time i used the dfu mode restore. So far i always using itunes restore.
I guess there are something make the battery drained. I think that icloud data and email account causes this issue. But when i try delete manually my two email accounts and icloud data backup. My battery still 1% / 3 minutes.
So, are you guys have some experiences? Any ideas?
Thanks before, regards from Indonesia

I'am sorry. I'am using ios 7.0.4 now. I forget to set it before i send that post

Parallax Scrolling and Browser Magnification

This is probably an unresolvable issue at this point, but it seems one of the BIG drawbacks to using Parallax Scrolling is that it only works as planned if the user of the site is viewing it at 100% Magnification. Any change up or down in magnification results in a different set of parameters for final motion, and if you're using it hoping that the final location of the moving object aligns with another fixed object in the overall design in some fashion, you're in for a big disappointment, and an embarrassing result if you're a designer. I'm hoping that there is some way in the future that the writers of this code will please include whatever math is necessary to compensate for changing browser magnification.

I realised the problem that i was having...thanks so much. I will explain for the help of others. Avoid putting the anchor in a "Composition" element. This i did inadvertantly since i had many layers. If you put it in one of them the smoothe scrolling will not work. This possibly holds true for grouped objects. I will also post the site to show that i have finally gotten it working. Thanks Zak and all the parties that showed kindness in answering me.
Best regards
http://www.raiora.com/index.html

My Page is flashing with parallax scrolling....

I am having an issue that my page "flashes" when using parallax scrolling.
you can find the page here:
hursey.com/rlf
it occurs at the bottome section of the page as you scroll down.
Any thoughts as to the cuase or remedy for this would be much appreciated!
As a side note I am also trying to resolve another dilemma where in the same section, I am trying to hide the type that comes in from the right for a portion of the page. You will see it come in over the browser area, then under other elements (which I want). I tried to place a rectangle over that area and tie it to the edge of the browser to have it go "full width" but that is not working.
Again any thoughts are appreciated!

Thanks. It would be helpful if you could send us your .muse file so we have a file that reproduces this Safari-specific flash. Could you send the file to [email protected] along with a link to this thread? If the file is larger than 20Mb you can use a service like Adobe SendNow, SendThisFile or WeTransfer. Thanks.
If you want to obscure the text before it reaches the page, I think you'll need to draw an opaque object on top and set the scroll motion settings for that object so it stays in the position where it needs to be to obscure the text as the text is sliding across.

Has anyone had issues with their Gyroscope or Accelerometers randomly breaking?

I had my phone in my purse for a few hours at work and when i took it out again they were no longer working. I didn't do anything (use, touch, drop, etc.) to the phone in that time period and now my phone gets extremely hot when I'm using it or when I'm charging it and the gyroscope/accelerometer no longer work. If i try to use the compass app it just goes on the fritz and the iPhone's parallax effect makes everything shake and swirl around like crazy.
I have a small scratch/chip in the corner of my phone and the Verizon store representative said he wasn't sure if it would be considered damaged or not. The iPhone is outside of the 1 year warranty. I'm not sure what to do but i can barely use the phone now

I understand your predicament radica1! Applications some times fail when system files get corrupted. I have resolved similar issues with my iPhone by doing a hard reset, as this procedure brings the phone back to original factory settings and clears any potential system error. Give it a try http://bit.ly/TDltcJ
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

I have ios 7.1.2 and I still can't find a way to completely disable the parallax effect but keep animations

I understand that reduce motion disables the parallax effect but it also disables the animations. When I turn perspective zoom off, it keeps the background from moving when I tilt my iPhone but the apps still movie. How do I make the background and the apps stay still but keep the animations? Is there even a way to do that?

In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
iTunes does prompt when it is going to erase a device, and the message is clear.
She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
She marked this as a solution, so it worked for her.

Parallaxing with layers..

Hey guys, Just wanted say I love Parallaxing! But I am having a few issues with it and layers. Even though I have the image "sent to back" it will appear on the top after hitting its keyframe to change the movement speed. I put up a link to issue, you will find it at the bottom of the page where I have the images of me and my co worker slide in from the sides. You will notice the tops of our heads will apear over the top nagavation bar.. Also any thoughts on the design of the site?
http://samp03.businesscatalyst.com/index.html
Thanks,
Josh

Hey-
I just checked you site out and I didn't see any bug. You and your co-workers head appears below the nav. Btw, shout out to Lancaster, Pa! I live outside Philly and I go to the Keystone Record Fair in Lancaster quite a bit.
>K.

Parallax Issues?

Similar Messages

Maybe you are looking for