Parallax Scrolling - rotate / fade

Is it possible to rotate a Parallax Scrolling element within muse and also possibly change opacity? Or is this a request feature?
Jonathan

Hi Jonathan,
I know you posted a little while ago, but I just wanted to post in here and let you know that I've actually created a widget that will allow you to change the rotation of a parallax item as you scroll. You can check out more info on the Widgets.Mu site, and see the demo site for it to check out all it can do.
At this point, opacity changes during scroll motion is supported natively by Muse, but I figured I'd let you know about the filling in of the rotation gap as well.
Hopefully this helps,
Thanks,
Andrew
Widgets.Mu Creator

Similar Messages

Parallax scrolling opacity feature causing jitteryness

Hi there,
First of all, the update is great.
I have been trying to use the opacity feature in parallax scrolling and have found that it causes an issue with my site. When scrolling through the page - even in sections that dont use parallax scrolling - the site jitters/flashes in and out of picture and also messes up the menu bar formatting. Is anyone else having this issue?
The site works fine with standard parallax scrolling, its only when the opacity feature is added that the issues crop up. Its not the end of the world but I was looking forward to incoorporating the opacity feature.
I cant attach pictures of the jitters but I can show the menu formatting mess up.
Andoni

Hi Jonathan,
I know you posted a little while ago, but I just wanted to post in here and let you know that I've actually created a widget that will allow you to change the rotation of a parallax item as you scroll. You can check out more info on the Widgets.Mu site, and see the demo site for it to check out all it can do.
At this point, opacity changes during scroll motion is supported natively by Muse, but I figured I'd let you know about the filling in of the rotation gap as well.
Hopefully this helps,
Thanks,
Andrew
Widgets.Mu Creator

Make a parallax scrolling object disappear?

I've been messing around with parallax scrolling and I'm at a point where I want to make the scrolling object disappear. So far the only way to make it vanish is to let it scroll off the edge of the page by default or to adjust the Opacity Scroll Effect to make it "fade". However, I'd like to have the object give the illusion that it's going inside/behind a stationary object on the page. The only thing I can think of is defining a viewport or something of the sort, but I don't know if that's possible in Muse. Anybody have any suggestions to create this illusion?

Hi
Using fading effect is the correct approach to the purpose you are after disappearing an object with scroll.
Regarding the illusion that you want to create will be somewhat manual , where you have to use 2 identical scroll items . One starts scrolling normal as you have mentioned above and then disappears , other one starts scrolling on behind the page object on same time when previous identical object has disappeared. A bit tricky but you will have to specify the key position of both identical items such as way that one fades in and another fades out. This way it would be exact same effect.
You can give it a try.
Thanks,
Sanjit

Image box with opacity gradients, and other parallax scrolling inhancements

First i want to say great job Muse Team, this is starting to get really interesting:
I've been playing around with parallax scrolling over gradients for effect,   but i'm dreaming about fading in full screen fields of texture.   without the weight of massive .png
1)      I would love to see the Background Image folder persist in the rectangle Fill > Gradient menu, with the options to tile etc.
2)     This feature along with speed and rotation controls for anchor finding, would really crack this thing wide open for me.
could be implemented with 2 lines coming off anchors:
one line straight down that can be rotated like a hand on a clock, to set the landing orientation.
and the second a diagonal line (thinking photoshop curves), to set the approach speed.
Maybe holding shift with the hand tool could rotate the design page, though i have no idea what rotation would do to the exhisting scrolling menu, i guess ill leave implementation to you!
3)     One last tweak, the option to remove scroll bars entirely from the page properties menu would be nice, but intil then i found this bit of code for the bleeding edge:
Insert as HTML to hide the horizontal scrollbar:
<style>
html,body{
overflow-x:hidden;
</style>
thanks for your time

Be sure your images are stacked properly in the order you need them in your Layers panel.
If that doesn't solve your problem please provide a link or screenshots so we can see your problem.

Parallax scrolling .OAM file is not working with muse

I had created recently parallax scrolling with Edge Animate. Parallax scrolling is not working after placing the OAM file in the muse.
The problem is its not triggering the function with the scroll. Any Idea ?

Please post your Edge Project file for others to cross-check?
Also Muse embeds Edge Animate as an iframe within the Muse html file, so that particular interaction my not be the best use case.
Also Muse (the latest version) has some wonderful Parallax capbilities built in - here are a bunch of references to check out.
Darrell

Photo gallery using parallax scrolling?

hey i have been testing out each of the slide show widgets in adobe muse. some of them are okay. the light box for once. is a challenge, but heres something i want to learn how to do. and its parallax scrolling with photos for a gallery. i think for what i am wanting to do i think its the best layout for me. heres a web site that hass it i think. http://album.alexflueras.ro/galleries/people.html#a1.
see i shows both landscape and portrait mode of photos. and thats been a challenge from the get go. so there i am thinking of using parallax scrolling . now how do i do this? is it done in photo shop and adobe muse. bec i do want to change out my i mages when needed?
now i am a tad bit curious. it looks good on desktop, but what about mobile devies. most phone. would it work great.?
so what are the steps for making this?
the other key thing i noticed. is that the photos are large. and thats what i like.
thanks

Hi
You can use composition on page where you can insert the images with scroll effect applied.
Check this video , its not exact design but will help to make images scroll page :
http://www.youtube.com/watch?v=BDgERSf2a5k
Thanks,
Sanjit

Discover New Parallax Scrolling with Adobe Muse CC | Creative Cloud for Design | Adobe TV

Terry White, Adobe worldwide evangelist, shows how Adobe Muse CC lets you create stunning effects with just a few clicks. Make images and elements move in different directions at different speeds when scrolling — all without writing code.
http://adobe.ly/12yzGv0

There has to be a way to create a Re: Discover New Parallax Scrolling with Adobe Muse CC | Creative Cloud for Design | Adobe TV slideshow that fills browser width. It's not a problem for desktop, but it is a problem for laptops/tablets/phones.
How did the site in the tutorial do it? Terry said it was created in Muse.
Here is a test site that I've been working on - I would love to make it responsive w/o having to create separate tablet/phone sites:
http://mandm.businesscatalyst.com
Any suggestions?

Parallax scrolling to images

hey i am wondering if you know of a way to add parallax scrolling to image slide tumbnail slide shows ?
this is what i am working on. i am using the compostion lightbox display, and in there. i have a thumbanil slide show. nowi have managed to get that in there. with the triggors.
now. i am wanting to see if i can added thumbnail slides that when i hit the slide, it shows the next set of images.
example.
engagment| Bridal| wedding
its one slide show, but when you hit it. you can go to the next slide, like how you have slide 1, 2 and 3. that what i am thinking is what parallax scrolling is?
can it be done? if so how?

Thanks for your reply. I tried applying the following AS2 script to each image:
For the first movie clip I used:
animator = createEmptyMovieClip('animator',1);
bg_1 = animator.attachMovie('star1','bg_1',1);
bg_2 = animator.attachMovie('star1','bg_2',2);
bg_1._x = -bg_1._width/2;
bg_2._x = bg_2._width/2;
speed = 1;
starWidth = 950;
animator.onEnterFrame = function() {
    bg_1._x -= speed;
    bg_2._x -= speed;
    if(bg_1._x <= -bg_1._width) bg_1._x = starWidth;
    if(bg_2._x <= -bg_2._width) bg_2._x = starWidth;
For the second movie clip I used:
animator = createEmptyMovieClip('animator',2);
bg1 = animator.attachMovie('star2','bg1',1);
bg2 = animator.attachMovie('star2','bg2',2);
bg1._x = -bg1._width/2;
bg2._x = bg2._width/2;
speed = 2;
starsWidth = 950;
animator.onEnterFrame = function() {
    bg1._x -= speed;
    bg2._x -= speed;
    if(bg1._x <= -bg1._width) bg1._x = starsWidth;
    if(bg2._x <= -bg2._width) bg2._x = starsWidth;
And for the third and final movie clip I used:
animator = createEmptyMovieClip('animator',3);
bg01 = animator.attachMovie('star03','bg01',1);
bg02 = animator.attachMovie('star03','bg02',2);
bg01._x = -bg01._width/2;
bg02._x = bg02._width/2;
speed = 3;
starssWidth = 950;
animator.onEnterFrame = function() {
    bg01._x -= speed;
    bg02._x -= speed;
    if(bg01._x <= -bg01._width) bg01._x = starssWidth;
    if(bg02._x <= -bg02._width) bg02._x = starssWidth;
I thought this would work, but when I tested the movie all three movie clips moved together at the same speed. I want each movie clip to move at a different speed, but I'm completely stuck.

Parallax Scrolling vertically not working right

My muse parallax scrolling page will not scroll vertically down the center. WHen I preview it, the page shifts to the left then scrolls down. What am I doing worng? Im using Adobe Muse CC.

Are you getting a scrollbar at the bottom of your browser when your browser is maximized? If yes, there is likely some content (not visible perhaps) placed bit to far to the right on the page.
Look for the same in Muse in Design View and get rid of the same.
Share a link to the page with this effect to check if you can't locate the element causing the shift.
Cheers,
Vikas

Parallax Scrolling and Browser Magnification

This is probably an unresolvable issue at this point, but it seems one of the BIG drawbacks to using Parallax Scrolling is that it only works as planned if the user of the site is viewing it at 100% Magnification. Any change up or down in magnification results in a different set of parameters for final motion, and if you're using it hoping that the final location of the moving object aligns with another fixed object in the overall design in some fashion, you're in for a big disappointment, and an embarrassing result if you're a designer. I'm hoping that there is some way in the future that the writers of this code will please include whatever math is necessary to compensate for changing browser magnification.

I realised the problem that i was having...thanks so much. I will explain for the help of others. Avoid putting the anchor in a "Composition" element. This i did inadvertantly since i had many layers. If you put it in one of them the smoothe scrolling will not work. This possibly holds true for grouped objects. I will also post the site to show that i have finally gotten it working. Thanks Zak and all the parties that showed kindness in answering me.
Best regards
http://www.raiora.com/index.html

First Time using Parallax Scrolling!

So I've been doing a new landing page for DJBigdad.com - I have included both project file and published files with in this zip to better explain myself.
Just finished my album animation with parallax scrolling but the overall published result shows nothing!
Here is the file! http://www.djbigdad.com/ParallaxProjects/LandingPageDJBigdad/DJBigdadLandingPage.zip
I love this edge animate stuff its great but sometimes it doesnt work... Probably a operator error lol
I would greatly appreciate any advice on how to fix this!
Thanks a ton
DJBigdad

to activate iphone, you should connect your iphone to your computer which should have itunes via your usb cable provided with your iphone problem. and you don't need to register an account to activate the iphone. but you need to register to download apps for iphone.
it have to be unlocked to work with other country's normal sim card. you should have a malaysian mini sim card to make a normal at&t iphone work in malaysia and other countries.
if you want to know about unloked phones, go to this webpage-> http://www.tgdaily.com/mobility-opinion/33600-unlocking-the-iphone-what-does-it- mean definition for unlocking--->
Unlocked is the term used to describe mobile phones that are not tied to a particular service provider in order to be used. Many cell phones are tied to a single cellular provider at their introduction, but are later unlocked for use on many networks.

Using parallax scrolling on a browser fill shape?

Hi everyone,
Is it possible to apply parallax scrolling onto a shape that is extended to horizontally fill up the browser? I'm creating a single page scroll website and a want a shape to cover up a certain fraction of the bottom of the browser (I can't use pin because then the shape will move with the bottom of the browser depending on the size of the window.) Parallax works fine on the shape until I extend it to the browser borders and then parallax grays out. Will this be supported in a future update? Is there another way for me to achieve this effect? Thanks!
Jackie

From Muse Release Notes - http://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html.
Note Scroll Motion Effects are not available for 100% browser width objects, pinned objects, items that are inline within text, items within a group or items within a widget.
You would also find a similar note in the information tooltip for Scroll Motion under the Effects panel in the Control strip. Please feel free to submit it as a feature request in our Ideas section.
Thanks,
Vinayak

My Page is flashing with parallax scrolling....

I am having an issue that my page "flashes" when using parallax scrolling.
you can find the page here:
hursey.com/rlf
it occurs at the bottome section of the page as you scroll down.
Any thoughts as to the cuase or remedy for this would be much appreciated!
As a side note I am also trying to resolve another dilemma where in the same section, I am trying to hide the type that comes in from the right for a portion of the page. You will see it come in over the browser area, then under other elements (which I want). I tried to place a rectangle over that area and tie it to the edge of the browser to have it go "full width" but that is not working.
Again any thoughts are appreciated!

Thanks. It would be helpful if you could send us your .muse file so we have a file that reproduces this Safari-specific flash. Could you send the file to [email protected] along with a link to this thread? If the file is larger than 20Mb you can use a service like Adobe SendNow, SendThisFile or WeTransfer. Thanks.
If you want to obscure the text before it reaches the page, I think you'll need to draw an opaque object on top and set the scroll motion settings for that object so it stays in the position where it needs to be to obscure the text as the text is sliding across.

Why is the webpage jumping all over the place with parallax scrolling?

Hi all, I'm getting a little frustrated here... I've built a looooong (10,200 pixel) parallax scrolling site, when I click 'Preview' it plays like a dream, but when I render the HTML, view in browser or publish to business catalyst to view, it just jumps all over the place. I realise that the page is extremely long, I'm thinking it could be that but just need to clarify it before I rework it all and maybe find out after, that it was something else that was causing it to happen.
Your views would be greatly appreciated!

Hi Aish,
I have found the problem, but not sure where to find the solution as I'm pretty new to Adobe products.
I built another site to see if I had the same problem, this time I made it shorter to see if the length was the problem. I put in some elements and 'assets', added parallax scroll key frames, left out pretty much most other things to see if I could pin the problem down. I found that I had the exact same problem.
In the Muse preview it scrolls with the mouse like a dream when I grab the scroll bar and drag it down. But when I preview in business catalyst, export HTML or preview in browser, it goes crazy and won't let me get to the bottom. Further to that, when you scroll back to the top, everything is out of place and gets worse every time you scroll down and back to the top.
I have a touch screen computer and tried to scroll the screen with my finger rather than dragging the scroll bar down with the mouse. The website works like a dream when I scroll with my finger, even when I scroll back to the top everything stays in place and the whole site works lovely! I then tried the other, long website to see if this was the same case and it was exactly the same case. It scrolls with a finger like a dream, but has a fit when you drag down the scroll bar with a mouse.
My next question would be could I somehow disable some kind of touch scroll option in only the desktop version of the site, but leave it active in mobile and tablet sites? If I can do this can you please advise me on how to deactivate it, I think that should solve the problem.
Can you please get back to me with an answer to this? I would be very greatful!
Marc.

On a Parallax Scrolling Page, How can I start the scroll bar at the bottom on page load?

Hello,
I'm working on a parallax scrolling animated page in Edge Animate, and it's a timeline of life on Earth. But we wanted to start from the bottom, or "Origin of Life" and then scroll up while our 'tree of life' animates in as the user scrolls up. We definitely know it's not good web etiquette to start at the bottom, but our client is determined. I am more of an animator than a web designer, but I was wondering how one might do this using a bit of code? We are using EC.Parallax.setup(sym); from Edgecommons for the parallax function, which is basically just tying the timeline animations to the scrollbar. I've already got the animations setup to go the right way but we don't want visitors to have to scroll to the bottom first, as they'll then see everything animated in reverse! In my google searches I found something called an Iframe that you can use, and then a flurry of responses on how horrible Iframe is. Thanks for your help, we really appreciate it!

Hi, Vizkid-
You can find the height of the document and then use window.scroll in your initialization function to default your scrollbar to the bottom of the page.
http://stackoverflow.com/questions/1145850/how-to-get-height-of-entire-document-with-javas cript
Hope that helps,
-Elaine

Parallax Scrolling - rotate / fade

Similar Messages

Maybe you are looking for